Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MoraKniv - Basic 546 Limited Edition 2024 - Dala Red & Ivy Green - 14282 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414282 -
MoraKniv - Basic 511 Limited Edition 2024 - Ivy Green & Dala Red - 14281 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414281 -
MoraKniv - Wit - Black Blade and Ash Wood - 14084 - knife
A reliable, full tang bushcraft knife that can be used in a wide variety of situations during your next long-duration adventure. The ergonomic polished ash wood handle allows for a variety of grips that can be useful. The black recycled Swedish stainless steel blade, with its full curvature and drop point, allows you to get the most out of your experience. The back of the blade is also compatible with a fire starter.
The unique, carefully selected ash wood handle features a functional grip bead and a 2.5 mm thick black blade made of recycled Swedish stainless steel, providing strength and stability with every cut. Thanks to the design of the blade and handle, the knife is well balanced and specially developed for precision work. The black PC coating creates a balanced contrast between the bright ash wood and the polished edge of the blade. The vegetable-tanned leather sheath has a belt loop and protects the cutting edge from surfaces that can dull the knife.
Intended use: hiking / bushcraft / light utility
Type of manufacture: semi-crafted
Blade: full tang, recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: ash wood
Blade length: 103mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Balance: advanced
Weight: 128g.
Sheath: vegetable-tanned leather
Notes: scandi-type sharpeningM14084 -
MoraKniv - Stainless Companion Bushcraft - OD Green - 14065OD - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065OD -
MoraKniv - Stainless Companion Bushcraft - Desert - 14065DE - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065DE -
MoraKniv - Stainless Companion Bushcraft - Black - 14065BK - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065BK -
Zwilling - Twin Finishing Stone Pro - sharpening stone grit 3000/8000 - synthetic stone
Stone sharpens knives synthetic, water, double-sided, with non-slip base
The innovative and practical pan plexiglass firmly holds the stone and provides excellent stability and a high level of security during l'affilatura.
Grit: 3000/8000
Stone Size: 17.5x7.5x1cm
Support: Plexiglas with lid and supports slip32505-300 -
Zwilling - Twin Stone Pro - sharpening stone grit 250/1000 - synthetic stone
Stone sharpens knives synthetic, water, double-sided, with non-slip base
The innovative and practical pan plexiglass firmly holds the stone and provides excellent stability and a high level of security during l'affilatura.
Grit: 250/1000
Stone Size: 17.5x7.5x1cm
Support: Plexiglas with lid and supports slip32505-100 -
Zwilling - V-Edge Knife Sharpener Knife sharpeners
Zwilling - V-Edge Knife Sharpener
Knife sharpeners
The ZWILLING V-Edge pull-through knife sharpener quickly, simply and effortlessly sharpens European and Japanese knives at the correct angle to a standard of quality and sharpness comparable only to professional sharpening with a whetstone. The V-Edge combines the advantages of conventional pull-through knife sharpeners and whetstones. Simple to use, it delivers quick and excellent results. The V-shape arranged ceramic sharpening stones evenly sharpen the entire length of the blade without risk of damaging it. The knife sharpener comes with two pairs of ceramic sharpening rods: one set is coarse grain of around 150 grit for re-sharpening dull knives, the other is the medium-fine grain of around 360 grit for maintenance and honing. Spare replacement fine grain rods of around 1000 grit are available for very fine honing.
.Please note, this knife sharpener is not suitable for serrated blades.
Professional knife sharpener
Outstanding and reliable sharpening results
Easy to use
Angle adaptor swaps out for European and Japanese blades
Sharpens at approx. 15° per side for European blades
Sharpens at approx. 10° per side for Japanese blades
Includes pair of coarse grain sharpening rods of 150 grit
Includes pair of medium-fine grain sharpening rods of 360 grit
Diameter: 20 x 8 cm
Height: 21 cm
Weight: 1 kg
32605-000 -
MoraKniv - Kansbol knife with Survival Kit - Burnt Orange - outdoor knife
A reliable outdoor knife with integrated lock that can be used in many difficult situations. Designed for the hunter and adventurer, the knife is an excellent choice when you need a safe and robust tool close at hand. The blade is made of Swedish stainless steel and has a long sharpness life.
The ergonomic barrel-shaped polymer handle features a soft non-slip grip, a finger guard and a 2.5 mm thick contoured blade, profiled and made of Swedish stainless steel, which ensures strength and stability in every cut.
Thanks to the design of the blade and the handle, the knife is ideal for working safely and efficiently in various weather conditions during all hunting seasons. The polymer knife sheath is symmetrical meaning it is suitable for both right and left handed users and has a Swedish vegetable tanned leather strap that can be easily attached to a belt. A survival kit with integrated lock, diamond sharpener and reflective paracord is mounted on the sheath of the knife.
Knife series: Kansbol
Knife type: All-round
Area of use: Bushcraft, Hunting, Outdoor
Color: Burnt OrangeSPECIFICATIONS
Blade length: 109mm
Blade thickness: 2.5mm
Knife length: 226mm
Total length: 250mm
Net Weight: 177.1g
Steel Type: Recycled Swedish Stainless SteelCompatibility with the fire starter: Yes
Degree of flexibility: Rigid
Handle material: Thermoplastic rubber
Dexterity: Right, Left
Sheath: in polymer
Sheath Orientation: Left, RightMK-1020 -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Museum Replicass Windlass - Primitive Bowie Knife - 400884 - knife
Intended use: sports / collection / hunting
Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box400884 -
Ahti Finland - Janka 75 - Finnish Puukko - Knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava. These knives are a perfect combination between tradition and quality construction.
Intended Use: Hunting / Sporting
Type of production: Hand
Blade: carbon steel 59HRC by Laurin Metals
Production Country: Finland
Handle: birch burl with brass bolsters
Blade length: 78mm.
Blade thickness: 3mm.
Overall length: 190mm.
Balancing: Defensive 2cm from the guard branch
Weight: 84g.
Sheath: leather with plastic insert
Notes: -14407 -
Ahti Finland - Kaira 72 - knife
Ahti Finland - Kaira 72 - knife
Knives handicraft made by the craftsman Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.Intended Use: Hunting / Sports
Type of production: crafts
Blade: carbon steel 59HRC by Laurin Metals
Production Lama: Finland
Handle: Birch with brass bolster
Blade length: 75mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: backlog 2cm from the branch guard
Weight: 120g.
Sheath: Leather with plastic insert
Notes: Cutlery Collini is distributor for Italy knives Ahti14403 -
Ahti Finland - Finnman 95-14401 - knife
Ahti Finland - Finnman 95-14401 - knife
Knife made in the Finnish city Kauhava.
Intended Use: Hunting / Sports / Fishing
Type of production: Industrial
Blade: steel stainless steel X55
Production Lama: Finland
Handle: plastic
Blade length: 90mm.
Blade Thickness: 2.5mm.
Overall length: 205mm.
Balancing: 2 cm back from the branch guard
Weight: 76g.
Sheath: Plastic
Notes: Cutlery Collini is distributor for Italy knives Ahtiafi95 -
Bradburn Custom Cutlery Pointy Kwaiken - custom knife
Knife made entirely by hand by the artisan American Bradburn
Blade: 1084 steel with a high carbon content and selective hardening clay 40/60HRC and high degree of polish .
Bo -Hi : none
Total length: 21.5cm .
Blade length : 9.5cm .
Blade thickness : 5mm .
Handle Length : 9.5cm .
Much Weight : 150g .
Sheath: kydex thermo format
Tsuka -ito : black cotton on same ( ray skin )
Menuki , Seppa , shitodome : bronzeNotes: one piece - certificate of authenticity signed craftsman
Small technical glossary : Hamon : tempering line on the blade * Hi : deep groove in the blade , also called colasangue * Saya : scabbard * Tsuka - Ito or Tsuka -gawa : weaving in cotton, silk or leather that wraps the handle * Tsuba : * guard Fuchi : ornament between guard and manicatura * Kashira : ornament at the end of the handle * Menuki : medallions placed under the cordage of the handle * Habaki : collar that wraps around the beginning of the blade * Seppa : * Shitodome guard seals : seals to which is linked the Sageo * Sori : curvature of the blade67203€307.38Out of stock -
Finland Ahti - Field Dressing 80 - knife
Finland Ahti - Field Dressing 80 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 77mm.
Blade Thickness: 3mm.
Overall length: 190mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives6783 -
Finland Ahti - Leuku 145 - knife
Finland Ahti - Leuku 145 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 145mm.
Blade Thickness: 3mm.
Overall length: 264mm.
Balancing: the branch guard
Weight: 192g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14411 -
Finland Ahti - Leuku 180 - knife
Finland Ahti - Leuku 180 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 180mm.
Blade Thickness: 3mm.
Overall length: 300mm.
Balancing: the branch guard
Weight: 215g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14412 -
Finland Ahti - Leuku 90 - Knife
Finland Ahti - Leuku 90 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 90mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: the branch guard
Weight: 170g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14410 -
Finland Ahti - Metsa 95 - Knife
Finland Ahti - Metsa 95 - Knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 205mm.
Balancing: the branch guard
Weight: 88g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14402 -
Finland Ahti - Tikka 62 - knife
Finland Ahti - Tikka 62 - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch
Blade length: 63mm.
Blade Thickness: 3mm.
Overall length: 170mm.
Balancing: the branch guard
Weight: 50g.
Sheath: Leather
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14401 -
Finland Ahti - Vaara - knife
Finland Ahti - Vaara - knife
Handmade knives made by the artisan Reino Kamppila in the Finnish city Kauhava.
These knives are a perfect combination of tradition and quality construction.
Intended use: Hunting / Sporting
Type of production: craft
Blade: carbon steel 59HRC by Laurin Metalli
Production Blade: Finland
Handle: Birch with brass bolsters
Blade length: 95mm.
Blade Thickness: 3mm.
Overall length: 210mm.
Balancing: 2.5 cm back from the guard
Weight: 94g.
Sheath: Leather with plastic insert
Notes: Collini Cutlery is the distributor for Italy of Ahti knives14405 -
Museum Replicas Windlass - Italian Bastard Sword 500890 - PRIVATE COLLECTION - Artisan Sword
sword withdrawn from a private collection - In excellent condition, only the blade has a scratch following the removal of an engraving (visible in the attached photos)
Checked and certified by our internal Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased and Used
* Condition: Excellent condition
* Marks on blade: YES
* Marks on handle: NO
* Box: Present
* Scabbard: Scabbard
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryThis splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so you can use a second hand as support while still being able to use the sword with one hand thanks to its weight and small dimensions.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total Length: 105cm.
Blade Width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -AP8687