Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Aitor - Jungle King II Black knife - Black Sheath - 16013 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013N -
Aitor - Jungle King I knife Black - green sheath - 16016V - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logos16016V -
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 10 left -
Corey Sar Fox - Camp Knife - Natural Micarta - Made in Italy
Intended use: Hunting / Hiking / Agriculture
Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 yearsCSF-CNA -
Corey Sar Fox - Camp Knife - Orange Micarta - Made in Italy
Intended use: Hunting / Hiking / Agriculture
Type of production: Industrial
Country of production: Italy
Blade: D2 steel at 59HRC
Blade treatment: Stonewashed
Handle: Micarta
Blade length: 90mm.
Blade thickness: 3mm.
Total length: 165mm.
Balancing: Backward
Weight: 94 g.
Sheath: leather, ambidextrous, belt with horizontal port
Packaging: Cardboard box
Notes: Designed by Corey Sar Fox, Texan knifemaker who has lived in Italy for over 20 yearsCSF-CAR -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Aitor - Jungle King II Black knife Camo - 16071 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16071 -
Aitor - Commando Black knife - 16021 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: Teflon-coated 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16021 -
Aitor - Commando Satin knife - 16020 - knife
Aitor Commando knife with 17 cm blade and double-edged saw on the back. The hollow black aluminum and magnesium grip features a finger groove. The matte gray stainless steel cap is unscrewable and reveals inside a compass and a small survival kit stored in a clear acrylic tube sealed with o-rings.
Intended use: Collection / Sports
Blade: 440C 57/58 HRC steel
Handle: Hollow, in black painted aluminum, with watertight compartment.
Blade length: 170 mm.
Blade thickness: 5 mm.
Total length: 315 mm.
Weight: 430 g.
Sheath: black PVC with Nylon loops
Accessories: Compass, Sharpening stone, Patches, Pins, Fishing hooks, Flint, Pencil, Tweezers, Needle, Scalpel, Nylon thread, Sewing threadAI-16020 -
Aitor - Jungle King I knife Black - 16016N - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16016N -
Aitor - Jungle King II Black knife - 16013N - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16013 -
Aitor - Jungle King II knife satin - 16012 - knife
The Jungle King is a multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. A steel skinner knife is also housed inside the sheath.
Intended use: Sports / Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 135mm.
Blade thickness: 4mm.
Total length: 275mm.
Weight: 225g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16012 -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Aitor - Ferfal Outdoor knife - N680 steel - 16099 - knife
Intended use: Collection / Outdoor
Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers
Packaging: cardboard with Aitor logosAI-16099 -
Aitor - Jungle King I knife Satin - 16015 - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16015 -
Aitor - Cocker navaja knife - 345.180 - 6.5 cm - knife
Vintage folding knife made by the well-known Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood with Cocker engraving
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 163mm.
Balancing:
Weight: 83g.
Blade lock: back lock345.180 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Aitor - Brama navaja knife - knife
Vintage folding knife made by the famous Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 200mm.
balancing:
Weight: 130g.
Sheath: -AI-BR -
BladeTech - Riptide Karambit - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson12063 -
Aitor - Desollador 347 180 - knife
Aitor - Desollador 347 180 - knife
Vintage folding knife made by famous Spanish house Aitor
Intended use: Sport
Type of production: semi-homemade
Blade: Stainless steel 440
Treatment Blade: -
Production Lama: Spanish
Handle material: brass and wood
Blade length: 70mm.
Blade Thickness: 4mm.
Overall length: 200mm.
balancing:
Weight: 136g.
Sheath: -347.180 -
Aitor - Luchadera 349.180 - coltello
Coltello chiudibile vintage realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: semi-artigianale
Lama: in acciaio inox 440
Trattamento Lama: -
Produzione Lama: spagnola
Manicatura: ottone e legno
Lunghezza lama: 150mm.
Spessore della lama: 4mm.
Lunghezza totale: 345mm.
Bilanciatura:
Peso: 628g.
Fodero: -349.180 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Aitor - Crow Black Tactical Knife - 16129 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 115mm.
Spessore della lama: 5mm.
Lunghezza totale: 235mm.
Bilanciatura: 2 cm arretrata dal ramo di guardia
Peso: 280g.
Fodero: in cuoio con attacco orizzontale e verticale4051B -
Aitor - Crow Tactical Knife - 16128 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 115mm.
Spessore della lama: 5mm.
Lunghezza totale: 235mm.
Bilanciatura: 2 cm arretrata dal ramo di guardia
Peso: 280g.
Fodero: in cuoio con attacco orizzontale e verticale4051 -
Aitor - One Black Tactical Knife - 16131 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: teflonatura
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252B -
Aitor - One Tactical Knife - 16130 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiata
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 145mm.
Spessore della lama: 5mm.
Lunghezza totale: 270mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 346g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido4252S -
Aitor - Zero Black Tactical Knife - 16127 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: black
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 125mm.
Spessore della lama: 5mm.
Lunghezza totale: 245mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 316g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido
Note: affilatore alloggiato nel manico4450B -
Aitor - Zero Tactical Knife - 16126 - coltello
Coltello tattico realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox CrMoVa 58HRC
Trattamento Lama: sabbiata
Produzione Lama: spagnola
Manicatura: impugnatura ergonomica in Fenolgraft
Lunghezza lama: 125mm.
Spessore della lama: 5mm.
Lunghezza totale: 245mm.
Bilanciatura: 1 cm arretrata dal ramo di guardia
Peso: 316g.
Fodero: tattico in cordura con attacco orizzontale e verticale e sgancio rapido
Note: affilatore alloggiato nel manico4450 -
Remington - Elite Hunter Series knife I - OWC 19735 knife
Intended use: sports
Type of production: industrial
Blade: full tang in 440C stainless steel
Blade treatment: -
Lama production: Italy
Handle: Aluminum and Olive Wood
Blade length: 103mm.
Blade thickness: 4mm.
Length closed: -
Total length: 223mm.
Balancing: set back - 4cm. from the guard branch
Weight: 234g.
Closing: -
Clip: -
Sheath: Leather
Notes: produced by CCN - Consorzio Coltellerie Maniago4301Special Price €88.53 Regular Price €110.66Out of stock