Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Antonini knives - Old Bear knife in SanMai VG10 a 67 layers - 23cm - multilayer black - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi-artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in plywood with satin brass ring with nickel plating
Blade length: 100mm.
Blade thickness: 2.5mm.
Closed length: 127mm.
Thick when closed: 22mm.
Total length: 225mm.
Weight: 68g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid safety ring in nickel plated brass equipped with a special locking device (covered by patent n. active partner of this project) which can be activated both in the open and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/23_MNK -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 21cm - olive tree - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: olive wood
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed length: 120mm.
Thick when closed: 22mm.
Total length: 212mm.
Weight: 65g.
Closure: viro blockThe handles are made of Italian olive wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n. of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/21_LU -
Antonini knives - Old Bear knife in SanMai VG10 at 67 layers - 19cm - walnut - Limited Edition
Antonini artisans from Maniago have created an exclusive and limited series of OLD BEAR knives using the famous Japanese SANMAI steel in VG10 with 67 layers. This beautiful project combines the tradition of a successful knife, patented and built in Italy, with the history and qualitative excellence of Japanese steel, made with a production process that dates back to that used for the famous Japanese swords.
The thickness of the blade goes from 2 mm of the standard models to 2.5 mm of this exclusive series, in order to make the knife more robust and performing.
To make the knife even more exclusive, for each of the three sizes offered, 60 exclusive pieces have been created, with progressive numbering engraved on the blade
Type of production: semi artisanal
Production Lama: Italy
Blade: San Mai 67 VG10 damask stainless steel (60/61 HRC)
Handle: in walnut wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 109mm.
Thick when closed: 22mm.
Total length: 190mm.
Weight: 46g.
Closure: viro blockThe handles are made of antique and oiled walnut wood. Being a model without return spring, the fixing of the blade to the handle is ensured by a solid brass safety ring equipped with a special locking device (covered by patent n.1187282 filed again in 1985 by the Todesco company of Maniago which is an active partner of this project) which can be activated both in the open position and in the closed position.
As early as 1100, expert Japanese blacksmiths combined different materials together to give Katana swords cutting, strength and flexibility previously unknown. Inspired by this tradition, Berkel has created a series of Japanese SanMai steel knives.
The blade consists of a core layer of extremely hard VG-10 steel, which keeps it sharp for a long time, and two outer plates made of 33-layer damask stainless steel per side, for greater resistance to corrosion and torsion.
Characteristics of SanMai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:
- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.For more information: Collini Steel
AE-9305/19_LN -
LionSteel - Gitano knife - Titanium and Micarta - GT01-CVG - knife
"My idea behind the Gitano was to make a folding knife that is based on old south european folding knives in a new style. What I like about these knives is its elegant lines and often large blades in relation to the handles". Gudy van Poppel
LionSteel loved Gudy 's idea and decided to start this new collaboration with him and Tools For Gents that helped us to devolope the final versions. Gitano is an E.D.C. (Every Day Carry) folding knife that joined the "Tradition by LionSteel" collection.
Gitano comes with a Niolox stailess steel satin blade. It is available with 6AI4V titanium bolsters and liners, while the scales can be made of olive wood, santos wood, green canvas, black G10 or carbon fiber.
For its light weight and average dimensions, Gitano is the new elegant slip-point knife to carry with you in every situation.
Intended use: Gentleman / EDCType of production: Industrial
Country of production: Italy
Blade: Stainless steel Niolox 59 / 60HRC
Blade treatment: Satin finish
Handle: Titanium 6Al4V and micarta
Blade length: 80mm.
Blade thickness: 2.5mm.
Closed length: 105mm.
Total length: 190mm.
Thick when closed: 12mm.
Weight: 76g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: cardboard box with LionSteel logos
Note: -LS-GT01CVG -
LionSteel - BestMan SlipJoint - Titanium and Micarta - BM1 CVN - knife
bestMAN is an E.D.C (Every Day Carry) folding knife born to be the best companion for daily activities. lionSTEEL takes a leap backwards towards the classics, creating a modern version of this knife with innovative technologies and high quality materials.
bestMAN is characterized by a M390 sintered steel clip blade, 6AI4V titanium escutcheons and natural micarta grips. For its lightness and small size, bestMAN is the new slipjoint knife ideal to take with you on any occasion.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Titanium 6Al4V and micarta
Blade length: 71mm.
Blade thickness: 2.5mm.
Closed Length: 96.5mm.
Total length: 170mm.
Thick when closed: 11.7mm.
Weight: 68g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: cardboard box with LionSteel logos
Note: -LS-BM1CVN -
Hoffner - Desert Folding knife 3.5" Black EOD - knife
Intended use: Tactical / CQC
type of production: Industrial
Blade: Stainless steel 440C
Blade treatment: -
Handle: G-10 Desert
Blade length: 90mm.
Blade thickness: 2.5mm.
closed length: 125mm.
Total length: 210mm.
thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logosfx-s3sbk-eod -
Aitor - Jungle King III - 16017 - Survival Knife
Intended use: Sport
Type of production: Industrial
Production Blade: Spain
Blade: 440C stainless steel
Treatment Lama: -
Handle: PVC
Blade length: 106mm.
Blade thickness: 2.5mm.
Length closed: -
Overall Length: 220mm.
Thick when closed: -
Balance: -
Weight: 120g.
Closing: -
Clip: -
Sheath: PVC and nylon sling and with tourniquet
Packaging: cardboard box with logos Aitor
Notes: compass and survival kit inside the handleAI-16017 -
Hoffner - Black Folding knife 3.5" Black chiseled - knife
Intended use: Tactical / CQC
Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: -
Handle: G-10 black chiseled
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logosfx-s3sbk-cb -
Hoffner - Khaki Flatline Folding 2.8" Black Combo - FK-S2CBK-FK - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 100mm.
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12370 -
Hoffner - Chiseled Folding 3.5" Corona Maduro - ATA - FK-S3SBS-CMA - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12369 -
Hoffner - Red Trainer Flatline FIRE DEPT. Folding 3.5 "- FK-RED-FIRE - knife
Hoffner - Red Trainer Flatline FIRE DEPT. Folding 3.5 "- FK-RED-FIRE - knife
Intended Use: Tactical / CQC / Training
Type of production: Industrial
Blade: Stainless steel 440C blade and rounded tip
Treatment Lama: -
Handle: G-10 Red
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 135g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos HoffnerH12239 -
Hoffner - Black Flatline Molon Labe Folding 3.5 "Satin - FK-S3CSS-FB - knife
Hoffner - Black Flatline Molon Labe Folding 3.5 "Satin - FK-S3CSS-FB - knife
Destinazione d'uso: Tattico / CQC
Tipo di produzione: Industriale
Lama: In acciaio inox 440C
Trattamento Lama: -
Manicatura: G-10 Black
Lunghezza lama: 90mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 132g.
Chiusura: Liner Lock
Clip: amovibile e reversibile in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi HoffnerH12240 -
Hoffner - Black Flatline SWAT Folding 3.5 "Satin - FK-S3CSS-FB - knife
Hoffner - Black Flatline SWAT Folding 3.5" Satin - FK-S3CSS-FB - coltello
Destinazione d'uso: Tattico / CQC
Tipo di produzione: Industriale
Lama: In acciaio inox 440C
Trattamento Lama: -
Manicatura: G-10 Black
Lunghezza lama: 90mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 132g.
Chiusura: Liner Lock
Clip: amovibile e reversibile in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi HoffnerH12237 -
Hoffner - Smooth Folding 3.5" Damascus Bloodflow - ATA - FK-S3SDB-SDB - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C, laminated to 67 layers
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12236 -
Hoffner - Olive Folding knife 3.5 "Black chiseled - knife
Intended use: Tactical / CQC
Type of production: Industrial
Blade: stainless steel 440C
Blade treatment: -
Handle: G-10 olive chiseled
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 148g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with Hoffner logosFK-S3SBK-FO -
Hoffner - Black Flatline Folding 2.8 "Satin Combo - FK-S2CSS-FB - knife
Hoffner - Black Flatline Folding 2.8 "Satin Combo - FK-S2CSS-FB - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10 Black
Blade length: 70mm.
Blade thickness: 2.5mm.
Closed Length: 100mm.
Overall length: 170mm.
Thick when closed: -
Balancing: -
Weight: 88g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12234 -
Hoffner - Chiseled Folding 3.5" Chess Match - ATA - FK-S3SBS-CMA - knife
Intended Use: Tactical / CQC
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 440C
Treatment Lama: -
Handle: G-10
Blade length: 90mm.
Blade thickness: 2.5mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 132g.
Lock: Liner Lock
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos Hoffner12233