Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition
* Commercially available: No longer in production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: In Kydex
* Manuals, Certificates and Warranties: NO
* Checked and certified by our internal laboratory

Intended Use: Tactical/Collection

Production Type: Semi-Industrial
Country of manufacture: USA
Blade: Carbon steel O1
Blade treatment: Grey Cerakote
Handle: G-10 Green
Blade length: 110mm. (100m. cutting edge)
Blade thickness: 4.6mm.
Total length: 230mm.
Balance: set back approx. 3 cm from the edge of the cheek piece
Weight: 260g. (353g. including scabbard)
Sheath: Kydex, with Kydex belt attachment
Packaging: Without box and certificates
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratory

Intended use: Sporting / Utility

Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -

For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.

The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle. 

The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.

The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased - knife dating back to the late 80s
* Condition: excellent condition
* Commercially available: Discontinued since 2018
* Sharpening: Factory
* Marks on blade: No
* Signs on the handle: very small marks
* Box: packaging
* Sheath: in wood
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratory

Intended use: Collection / Vintage

Type of production: handcrafted
Country of production: USA
Blade: hand forged Damascus steel
Blade treatment: -
Handle: in wood
Blade length: 110mm.
Blade thickness: 5.5mm.
Total length: 230mm.
Weight: 245g.
Scabbard: wooden scabbard
Notes: limited edition 1 of 200

handcrafted knife entirely handmade with grinding wheel and file. The blade is made of ledeburitic steel with 2.3% carbon obtained by powder metallurgy and reaches a hardness of 64 HRC. Perfect for hunting and outdoor use.

Intended use: collection / hunting

Type of production: custom
Production Lama: USA
Blade: 64HRC powder steel
Blade treatment: -
Handle: in deer horn and tuya burl with brass guard
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 172g.
Sheath: in brown leather sewn and handmade
Notes: knife made in Italy in the late 90s - certificate of the craftsman

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total lenght: 238mm.
Thickness when closed: 13mm.
Weight: 147g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Package: cardboard box with Cold Steel logos
Notes: -

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.

Intended use: Tactical / Allround

Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Camo
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | Smashing

Rare knife handcrafted by Bob Dozier in 2001, made of D2 steel with sandblasted titanium handle and anodized details.

Intended use: Collection

Type of production: handmade
Country of production: USA
Blade: in D2 steel at 61HRC
Blade treatment: satin finish
Handle: in titanium with anodized details
Blade length: 105mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 250mm.
Weight: 170g.
Closure: Liner Lock
Clip: titanium, removable
Notes: made entirely by hand by Bob Dozier in 2001

Designed by Mike Wallace, the Immortal model was inspired by the shape of the famous Roman dagger

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm.
Weight: 168g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 244mm.
Thick when closed: 10mm.
Weight: 136g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -

Intended use: Sports / Tactical

Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Closed Length: 136mm.
Overall length: 238mm.
Thick when closed: 13mm.
Weight: 147g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -

Intended use: Sports / Collection

Type of production: handmade
Country of Origin: USA
Blade: D2 steel 61HRC
Blade treatment: satin finish
Handle: Micarta black and burgundy, folders and spacers Titanium
Blade length: 102mm.
Blade Thickness: 3.5mm.
Closed Length: 133mm.
Overall length: 234mm.
Weight: 212g.
Lock: Liner Lock
Clip: -
Notes: made entirely by hand by Bob Dozier in 2013

Destinazione d'uso: Sportivo/Caccia

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8A - 55/57HRC
Trattamento Lama:
Manicatura: Grivory
Lunghezza lama: 100mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 224mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Molle di ritenzione su entrambi i manici
Clip: Amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Cold Steel
Note: non utilizzabile come un coltello balisong/butterfly

Destinazione d'uso: Sportivo / Tattico

Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox CTS-XHP
Trattamento Lama: Teflonatura
Manicatura: G-10
Lunghezza lama: 101mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 136mm.
Lunghezza totale: 238mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 150g.
Chiusura: Tri-Ad Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola di cartone con loghi Cold Steel
Note: -

Intended Use: Neck Knife

Blade: full tang in 420 stainless steel
Country of manufacture: Taiwan
Handle: cotton rope
Blade length: 108mm.
Blade thickness: 5.75mm.
Total length: 203mm.
Weight: 77g.
Scabbard: ABS, for neck
Notes: -