Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Spyderco - Endura 4 - Half Serrated Black Blade - PRIVATE COLLECTION - C10PSBBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: SportingType of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collectionC10PSBBK-CP -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FSK390 -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
Spyderco - Endela - Plain Black - C243PBK - Knife
Intended use: Sporting
Type of production: industrial
Blade: Stainless steel VG-10
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 206mm.
Thickness when closed: 15.5mm.
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position stainless steel clip
Notes: -C243PBK -
Spyderco - Police - Half Serrated - C07PS - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -C07PS -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Endura Flat Ground - Zome Green - C10ZFPGR - Knife
Intended use: Sports
Type of production: Industrial
Blade: Stainless Steel VG-10
Blade treatment: satin
Production Country: Japan
Handle: FRN liners with embedded stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15.5mm.
Weight: 94g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Full-Flat GrindC10ZFPGR -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Dragonfly Stainless Steel - SC28P - knife
Intended Use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Blade treatment: -
Handle: Stainless steel
Blade length: 58mm.
Blade thickness: 2mm.
Closed Length: 80mm.
Overall length: 140mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closure: Back Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -SC28P -
Spyderco - Manbug Lightweight - MBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thickness when folded: 8mm.
Balancing: -
Weight: 19g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -MBKP -
Spyderco - Endura 4 Flat Ground - Gray - C10FPGY - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Gray FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 94g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC10FPGY -
Spyderco - Delica 4 SpyderEdge - C11SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 72g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C11SBK -
Spyderco - Endura 4 Black Blade - C10PSBBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: titan black carbonitriding
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 106g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10PSBBK -
Spyderco - Endura 4 Black FRN SpyderEdge - C10SBK - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10SBK -
Spyderco - Endura 4 Wave knife - C10PGYW - knife
Spyderco - Endura 4 Wave - C10PGYW - knife
Intended use: Sport
Type of production: industrial
Blade: VG-10 stainless steel 58HRC
Treatment Lama: -
Blade Production: Japan
Handle: dark blue liners with FNR drowned in stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Wave hook for easy opening patented by Emerson Knives originally developed for the U.S. Navy SEALs special unitsC10PGYW -
Spyderco - Ladybug 3 - LBKS3 - knife
Intended use: Sporting/EDC
Production type: Industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2mm.
Length closed: 62mm.
Total length: 111mm.
Thickness when closed: 8mm.
Balance: -
Weight: 14g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard case with Spyderco logos
Notes: -LBKS3 -
Spyderco - Chaparral knife Gray FRN - PRIVATE COLLECTION - C152PGY - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDCType of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal GlesserC152PGY -
Spyderco - Endura 4 Flat Plain Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FPK390 -
Spyderco - Assist Knife - C79BK - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Discontinued as of 2019
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present and original, but without label and with signs of wear and tear
* Scabbard: Not present
* Manuals, Certificates and Warranties: No
* Checked and certified by our internal laboratory
Intended use: SportingType of production: industrial
Blade: stainless steel VG-10
Blade finish: satin-finished
Country of manufacture: Japan
Handle: FRN Black
Blade length: 94mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 213mm.
Weight: 115g.
Closure: Back Lock
Clip: Removable, double positioning, stainless steel
Notes: Version remained in production approximately from 2004 to 2019 - specimen withdrawn from private collection, overall in good condition. Equipped with retractable glass breaker and whistle integrated in the handle.AP-C79BK -
Spyderco - Dragonfly - 2008 Integral FRN Clip - C28S - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good conditionAP-C28S -
Spyderco - Delica 4 - G10 Foliage Green - C11GPFG - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good conditionAP-C11GPFG -
Spyderco - 1997 Calypso Jr. Experiment PLN Micarta - C52BMP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDC / Collection
Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.C52BMP-CP -
Spyderco - Manix 83mm Half Serrated - C101GPS - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - model now discontinued and no longer available - 83mm blade "small" version - overall in excellent condition, shows no signs of wear or use - factory sharpening in perfect condition - no packaging - checked and certified by our in-house laboratory.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S30V
Blade finish: satin finish
Handle: G-10 with stainless steel liners
Blade length: 83mm.
Blade thickness: 3.5mm.
Length closed: 117mm.
Total length: 201mm.
Weight: 155g.
Closure: Back Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: discontinued knife - withdrawn from private collection, overall in very good conditionC101GPS-CP -
Spyderco - Delica 4 Wharncliffe Plain - C11FPWCBK - PRIVATE COLLECTION - knife
Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory
Intended use: Sports
Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpeningAP-C11FWCBK -
Spyderco - Native 5 - FRN Lightweight - CPM-S30V Plain Black Blade - C41PBBK5 - Knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -C41PBBK5-S30 -
Aitor - Cocker navaja knife - 345.180 - 6.5 cm - knife
Vintage folding knife made by the well-known Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood with Cocker engraving
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 163mm.
Balancing:
Weight: 83g.
Blade lock: back lock345.180 -
Spyderco - Dragonfly 2 Plain - K390 Blue FRN - C28FP2K390 - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steelC28FP2K390 -
Spyderco - Delica 4 Flat Plain - K390 Blue FRN - C11FPK390 - knife
Intended use: Sports
Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steelC11FPK390 -
Aitor - Brama navaja knife - knife
Vintage folding knife made by the famous Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 200mm.
balancing:
Weight: 130g.
Sheath: -AI-BR -
Spyderco - Dragonfly 2 - Black Serrated - C28SBK2 - knife
Intended use: Sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closing: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Note: -C28SBK2 -
Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife
Intended use: sub / immersion / sports
Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosionC28YL2HB -
Spyderco - Chaparral Gray FRN - C152GY - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Load-bearing nylon
Blade length: 71mm.
Blade thickness: 2mm.
Length closed: 91mm.
Total length: 163mm.
Thick when closed: 16mm.
Weight: 60g.
Closure: Back Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal GlesserC152GY -
Spyderco - Native 5 - Maxamet Sprint Run - C41PGY5 - knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: CTS Maxamet Tool Steel 67/68HRC
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Weight: 70g.
Locking System: Back Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: limited edition sprint runC41PGY5 -
Spyderco - Native 5 - FRN Lightweight - Black Blade - C41BBK5 - knife
Intended Use: Sport / Collection
Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -12389 -
Spyderco - Endura 4 Knife - Titanium and Damascus - C10TIPD - knife
Intended Use: Collection
Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.C10TIPD -
Spyderco - Delica - Titanium and Damascus - C11TID - knife
Intended Use: Collection
Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.12290 -
Spyderco - Native 5 Lightweight - C41PBK5 - knife
Intended Use: Sporting / Collection
Production Type: Industrial
Blade production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade Treatment: -
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 98mm.
Total length: 175mm.
Thickness when closed: 14mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C41PBK5 -
Spyderco - Manbug ZPD-189 - MGRE - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -12246 -
Spyderco - Assist Orange FRN - C79OR - knife
intended use: Rescue / Emergency
Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN orange
Blade length: 94mm.
Blade thickness: 3mm.
Closed Length: 124mm.
Overall length: 213mm.
Thick when closed: -
Balancing: -
Weight: 115g.
Closure: back lock
Clip: reversible and removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: emergency whistle - retractable glass breaker12213 -
Spyderco - Kiwi 4 - C178GP - knife
Use: Tactical / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu12075 -
Spyderco - Battlestation by Dialex - C168G - knife
Use: Tactical / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu12072 -
Aitor - Desollador 347 180 - knife
Aitor - Desollador 347 180 - knife
Vintage folding knife made by famous Spanish house Aitor
Intended use: Sport
Type of production: semi-homemade
Blade: Stainless steel 440
Treatment Blade: -
Production Lama: Spanish
Handle material: brass and wood
Blade length: 70mm.
Blade Thickness: 4mm.
Overall length: 200mm.
balancing:
Weight: 136g.
Sheath: -347.180 -
Aitor - Luchadera 349.180 - coltello
Coltello chiudibile vintage realizzato dalla nota casa spagnola Aitor
Destinazione d'uso: Sportivo
Tipo di produzione: semi-artigianale
Lama: in acciaio inox 440
Trattamento Lama: -
Produzione Lama: spagnola
Manicatura: ottone e legno
Lunghezza lama: 150mm.
Spessore della lama: 4mm.
Lunghezza totale: 345mm.
Bilanciatura:
Peso: 628g.
Fodero: -349.180 -
Spyderco - Delica 4 Madreperla e Marmo Picasso by SantaFe Stoneworks - C11S
Destinazione d'uso: Collezione
Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico10847 -
Spyderco - Endura Stainless Steel Plain Edge - C10P - knife
Intended use: Sport
Type of production: industrial
Blade: stainless steel VG-10
Treatment Lama: -
Blade Production: Japan
Handle: Stainless Steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 161g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -C10P -
Spyderco - Caly 3.5 Carbon Fiber ZDP - C144CFPE - knife
Intended Use: sports / tactical
Type of production: industrial
Production Blade: Japan
Blade: Stainless steel with rolled edge in ZDP-189 to 67HRC and cheeks external 420J2
Treatment Lama: -
Handle: Carbon Fiber
Blade length: 86mm.
Blade Thickness: 3mm.
Closed Length: 108mm.
Total length: 194mm.
Balance: -
Weight: 88g.
Closure: Back Lock
Clips: stainless steel, removable and reversible
Sheath: -
Notes: -SC144CFPE -
Spyderco - Dragonfly 2 Salt Yellow - C28YL2 - knife
Intended Use: Sport / Sub
Blade: Stainless H1 nitrogen
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: Resistant to rust and oxidation10130 -
Spyderco - Delica 4 FRN - C11PBK - knife
Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -
2263P -
Spyderco - Dragonfly G-10 Foliage Green - C28GFG - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG10
Trattamento Lama: -
Manicatura: G10 Foliage Green
Lunghezza lama: 57mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 81mm.
Lunghezza totale: 140mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 56g.
Chiusura: Back Lock
Clip: Reversibile ed amovibile, in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -3816 -
Spyderco - Ulize - C161G - knife
Spyderco - Ulize - C161G - knife
Intended Use: Tactical
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10 Black
Blade length: 104mm.
Blade thickness: 3mm.
Closed Length: 138mm.
Total length: 243mm.
Thick when closed: -
Balance: -
Weight: 136g.
Closure: Back Lock
Clip: Multiposition and removable, stainless steel
Sheath: -
package:
Cardboard box with logos Spyderco
Notes: -3812 -
Spyderco - C08S Harpy - knife - coltello
Spyderco - C08S Harpy - knife
Intended use: Sport
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10 (suitable for cut tops - ropes - networks - the machine belts etc.).
Treatment Lama: -
Handle material: steel
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: 95mm.
Total length: 164mm.
Thick when closed: 8mm
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes:0223 -
Spyderco - Caly 3.5 - C144GP knife
Spyderco - Caly 3.5 - C144GP knife
Intended Use: sports / tactical
Type of production: industrial
Production Blade: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10
Blade length: 87mm.
Blade Thickness: 3mm.
Length closed: 109
Total length: 193mm.
Balance: -
Weight: 90g.
Closure: Lock back
Clips: stainless steel, removable and reversible
Sheath: -
Notes: third version of the famous calypso folder3664 -
Spyderco - Chaparral Carbon Fiber - C152CFP coltello
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox CPM-S30V
Trattamento Lama: -
Manicatura: Fibra di Carbonio
Lunghezza lama: 60mm.
Spessore lama: 2mm.
Lunghezza chiuso: 92mm.
Lunghezza totale: 160mm.
Spessore da chiuso: 8mm.
Bilanciatura: -
Peso: 70g.
Chiusura: Back Lock
Clip: Acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -3796 -
Spyderco - Civilian knife - C12GS knife
Intended use: tactical
Type of production: industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: G-10 carrier with stainless steel right liner
Blade length: 106mm.
Blade thickness: 3mm.
Closed length: 132mm.
Total length: 234mm.
Balancing: -
Weight: 234g.
Closure: Back Lock
Clip: in stainless steel, reversible and removable
Scabbard: -
Note:C12GS -
Spyderco - Delica 4 Stainless Steel SpyderEdge - C11S coltelli
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 115g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -SP-C11S -
Spyderco - Delica 4 Wave - C11PGYW coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: dark blue FRN con liners annegati in acciaio inox
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 72g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: gancio Wave per apertura facilitata patented by Emerson Knives sviluppato originariamente per le unità speciali U.S. Navy SEALs3659 -
Spyderco - Delica 4 ZDP Full Flat - C11PGRE - knife
Destination of use: sports
Type of production: industrial
Country of production: Japan
Blade: stainless steel ZDP-189 65 / 67HRC
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon) with stainless steel embedded liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Thickness closed: 9.9mm.
Weight: 72g.
Locking system: Back Lock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Spyderco logos
Note: -3655L -
Spyderco - Dragonfly Stainless Steel Serrated - SC28S - coltello
Destinazione d'uso: EDC/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio inox VG-10
Trattamento Lama: -
Manicatura: acciaio inox
Lunghezza lama: 58mm.
Spessore lama: 2mm.
Lunghezza chiuso: 80mm.
Lunghezza totale: 140mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 74g.
Chiusura: Back Lock
Clip: in acciaio inox, amovibile
Fodero: -
Confezione: Scatola di cartone con loghi Spyderco
Note: -2265 -
Spyderco - Endura 2008 Foliage Green - C10GPFG
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Giappone
Lama: in acciaio inox VG10 - 58HRC
Trattamento Lama:
Manicatura: G10 Foliage Green, con liners in acciaio inox annegati
Lunghezza lama: 97mm.
Spessore lama: 3mm.
Lunghezza chiuso 108mm.
Lunghezza totale: 222mm.
Spessore da chiuso: 15.3mm.
Bilanciatura: -
Peso: 124g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3719 -
Spyderco - Endura 4 Stainless Steel SpyderEdge - C10S - coltello
Destinazione d'uso: Sportivo
Tipo di produzione: industriale
Lama: in acciaio inox VG-10
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: Acciaio Inox
Lunghezza lama: 95mm.
Spessore della lama: 3mm.
Lunghezza chiuso: 125mm.
Lunghezza totale: 220mm.
Bilanciatura: -
Peso: 161g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: -3669 -
Spyderco - Endura 4 ZDP Grey Plain - C10PGRE knife
Intended use: Sport
Type of production: industrial
Blade: stainless steel ZDP-189
Treatment Lama: -
Blade Production: Japan
Handle: FRN Grey with stainless steel liners drowned
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -3693 -
Spyderco - J.D. Smith Foliage Green - C58GPFG coltello
Destinazione d'uso: Sportivo / Collezione
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: In acciaio inox VG-10
Trattamento Lama: -
Manicatura: G-10
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 218mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 120g.
Chiusura: Back Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Spyderco
Note: -3736