Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory.
* Marks on blade: slight marks near the handle, due to blade opening.
* Marks on handle: No.
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory




Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN (fiberglass reinforced nylon)
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: made of FRN, integrated into the handle
Notes: Third series made by Spyderco for the Dragonfly model, version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in very good condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued since 2010.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight signs of wear, especially on clip
* Box: Present and original
* Scabbard: not provided
* Manuals, Certificates and Warranties: no.
* Checked and Certified by our in-house laboratory



Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: satin finish
Country of manufacture: Japan
Handle: G10 Foliage Green and Stainless Steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 90g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Version remained in production only from 2008 to 2010 - specimen withdrawn from private collection, overall in good condition

Knife withdrawn from a private collection - Condition like new - Re-sharpened by our sharpening laboratory - Original box - Knife checked and certified by our internal laboratory

Intended use: Sports

Type of production: industrial
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Production Lama: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 68g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Notes: Flat Ground sharpening

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: industrial
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade treatment: satin finish
Country of production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Closed length: 107mm.
Total length: 180mm.
Weight: 66g.
Closure: Back Lock
Clip: removable, multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade thickness: 2.5mm.
Length closed: 84mm.
Total length: 141mm.
Weight: 34g.
Closing: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Note: -

Intended use: sub / immersion / sports

Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosion

Intended use: Utility / Hunting

Type of production: Industrial
Country of production: Seki - Japan
Blade: Stainless Steel VG-10
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 72mm.
Blade thickness: 2.5mm.
Closed Length: 106mm.
Overall length: 175mm.
Thick when closed: 10mm.
Weight: 102g.
Closure: Front Lock
Clip: reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Design by Paul Alexander

Intended Use: Collection

Type of production: Industrial
Blade: Damascus steel laminate DPS15 with sharp VG-10 58HRC
Treatment Lama: -
Production Lama: Japan
Handle: Titanium brushed
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Balancing: -
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Note: the blade is made in a special steel with 31 layers produced by Takefu Special Steel Company Ltd.

Intended Use: Sport / EDC

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel ZDP-189 67HRC
Blade treatment: -
Handle: FRN British Racing Green
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thick when closed: 8mm.
Balancing: -
Weight: 20g.
Locking system: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Use: Tactical / EDC

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: G-10 Black
Blade length: 75mm.
Blade thickness: 3.5mm.
Closed Length: 107mm.
Overall length: 183mm.
Thickness when folded: -
Balancing: -
Weight: 130g.
Lock: Back Lock
Clip: Multi position and removable stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Alexandru "Dialex" Diaconescu

Palmerino horn cattle PA2C20 two knives - knife

The production of Scarborough has not devoted much attention to penknives.
It was, however, made a template from the desk, which in the past was used to make the tip of the quill pens and pencils.
This sharpener Scarperia was always devoid of spring and could have from one to two blades; unmistakable the shape of the handle, in a single piece of horn.
In the catalogs of the early years of the twentieth century these items were listed as "sharpeners use Palmerini" which was actually the name of a renowned manufacturer of the nineteenth century.
Proposed model is at the tip of the horn two blades.

Stainless steel blade 440.
Blade length 4.6 cm.
Blade thickness 2.5 mm.
Overall length 15 cm.
Weight 40 gr.

Rasolino in bovine RAC-20 - Knife

The name of this knife comes from the shape of the blade, reminiscent of the razor.
Had spread following the law Giolitti in 1908 which placed severe limitations to the port of sharp knives, and that favored the production of various models in a truncated tip.
  The Rasolino is distinguished by the slight curvature of the blade and back to the shape of the handle.

Stainless steel blade 440.
Blade length 9 cm.
Blade thickness 2.5 mm.
Overall length 20 cm.
Weight 70 gr.

Destinazione d'uso: Collezione

Tipo di produzione: industriale (lama) ed artigianale (impugnatura)
Lama: in acciaio inox VG-10 58HRC
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: interamente realizzata a mano da SantaFe Stoneworks, in Marmo Picasso e Madreperla
Lunghezza lama: 75mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 107mm.
Lunghezza totale: 180mm.
Bilanciatura: -
Peso: 145g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Note: impugnatura artigianale in pietra dura realizzata con la tecnica del mosaico

Intended Use: Sport / EDC

Blade: 66/67HRC ZDP-189 stainless steel
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: -

Green - C11FPGR - knife
Blade: 58HRC VG-10
Stainless Steel Handle: FRN Blade
Length: 75mm.
Blade Thickness: 2.5mm.
Overall Length: 180mm.
Weight: 66g.
Lock: Back lock
Clips: Stainless Steel
Sheath: - Notes: -

Intended Use: Sport / Sub

Blade: Stainless H1 nitrogen
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: Resistant to rust and oxidation

Spyderco - Memory Centofante Pin - C155TIP - knife

Intended Use: Sport / Collection
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10 Treatment
Blade: -
Handle: Titanium and Glass Fiber
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed Length: 103mm.
Total length: 207mm.
Thick when closed: -
Balance: -
Weight: 88g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Jewel case with leatherette zip
Notes: a tribute to the late Frank Centofante

Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -

Destination of use: sports

Type of production: industrial
Country of production: Japan
Blade: stainless steel ZDP-189 65 / 67HRC
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon) with stainless steel embedded liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Thickness closed: 9.9mm.
Weight: 72g.
Locking system: Back Lock
Clip: stainless steel, removable and multiposition
Packaging: cardboard box with Spyderco logos
Note: -

Destinazione d'uso: Sportivo

Tipo di produzione: industriale
Lama: liscia in acciaio inox ZDP-189
Trattamento Lama: -
Produzione Lama: Japan
Manicatura: FRN con liners annegati in acciaio inox
Lunghezza lama: 90mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: 111,5mm.
Lunghezza totale: 200mm.
Bilanciatura: -
Peso: 96g.
Chiusura: Back Lock
Clip: amovibile, multiposizione, in acciaio inox
Fodero: -
Note: