Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Viper - Slim - Cervo - V5350CEB - coltello
Viper - Slim Cervo
Questo splendido gentleman dalla grande cura costruttiva e dalle ottime finiture ribadisce, nel caso ce ne fosse ancora bisogno, che Viper non solo sa curare il prodotto nei minimi particolari, ma riesce sempre a trovare soluzioni estetiche raffinate e all'avanguardia al tempo stesso.
Lama: Acciaio Sandvik 12C27 satinata
Corpo: Acciaio
Chiusura: Frame Lock
Lunghezza chiuso: 7.5cm.
Lunghezza aperto: 12.5cm
Lunghezza lama: 4.5cm.
Peso: 35g.
Clip: Acciaio
Manicatura: Cervo1313 -
Viper - Vernante Corno by Fabrizio "Silvester" Silvestrelli - V5748CO - regional knife
A typical Piedmontese knife originating from the village of Vernante, in the province of Cuneo, in use since the beginning of the 19th century also in nearby Liguria. It is characterised by a forged button on the upper part of the blade's heel, which allows it to fit into the hollow of the handle with the blade open, acting as a stop.
Intended use: Regional/Collection/Sporting
Type of production: Industrial
Blade Production: Italy
Blade: Stainless steel 440A 55/57HRC
Blade Treatment: -
Handle: Bovine horn tip
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 200mm.
Thickness when closed: -
Balance: -
Weight: 100g.
Closure: Double retention spring on inner liners
Clips: -
Sheath: Suede leather pouch with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered examples with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2837CO -
Viper - Vernante Palissandro by Fabrizio "Silvester" Silvestrelli - V5748PA - coltello regionale
Coltello tipico piemontese originario del paese di Vernante, in provincia di Cuneo, in uso sin dall’inizio dell’ottocento anche nella vicina Liguria. E' caratterizzato da un bottone forgiato sulla parte superiore del tallone della lama che ne permette l’alloggiamento nell’incavo del manico a lama aperta, fungendo da battuta.
Destinazione d'uso: Regionale/Collezione/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 440A 55/57HRC
Trattamento Lama: -
Manicatura: Legno di Palissandro
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 113mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2837PA -
Viper - Katla Knife by Vox - Damascus - Dark Matter Carbon Fiber - Limited Edition - VA5980FCM - Knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which brings back the Tanto profile blade with a bevel that enhances the excellent cutting qualities.
The rotation mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern way, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Super Dense Twist stainless Damascus
Blade finish: Satin
Handle: Dark matter carbon fiber
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 122g.
Lock: Liner Lock
Clip: Titanium
Packaging: Deluxe cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing - Damascus SSCT spacer - limited edition of 100 piecesVA5980FCM -
Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60/61HRC
Blade finish: Stonewashed
Handle: Walnut
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 107g.
Lock: Liner Lock
Clip: Titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearingV5985NO -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Green Canvas Micarta - V6000CG - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Elmax SuperClean 59/61HRC stainless steel
Blade Finish: Stonewashed
Handle: canvas micarta handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000CG -
Viper - Basic 3 by T. Rumici - MagnaCut & Green Canvas Micarta - VT4034CG - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in MagnaCut steel
Blade treatment: Satin finish
Handle: Micarta
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 204mm.
Weight: 210g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4034CG -
Viper - Vale by Vox - UltreX SureTouch & CPM MagnaCut - V6006GG - knife
Connoisseurs know the value of a good knife. Viper honors this thought with the Vale as a high-quality EDC knife with selected materials. The MagnaCut blade opens smoothly via the thumb stud and is locked by the sturdy liner lock. The handle uses the brand new UltreX composite, a perfect material for modified G-10 handles.
SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material.
The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.
Intended Use: Gentleman/EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior)
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6006GG -
Viper - Vale knife by Vox - Green Canvas - MagnaCut - V6006CV - knife
Intended use: Gentleman/EDC
Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Micarta
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6006CV -
Viper - Twin FCG - Slipjoint by Fabrizio Silvestrelli - M390 - Dark Matter Gold - V6002FCG - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Dark Matter Gold carbon fibre grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV6002FCG -
Viper - Rhino 1 - Elmax steel - Pau Santo wood by Fabrizio Silvestrelli - V5901CB - knife
Intended use: Sporting
Production type: Industrial
Blade Production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade Treatment: Satin
Handle: Pau Santo wood
Blade length: 108mm.
Blade thickness: 4.2mm.
Length closed: 143mm.
Total length: 253mm.
Thickness when closed: 19mm.
Balance: - Weight: 280g.
Closure: Back Lock with two wire springs
Clip:Tempered AISI420 steel with stonewashed treatment
Sheath: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" SilvestrelliV5901CB -
Viper - Rhino 1 - Elmax steel - DCV Green Micarta by Fabrizio Silvestrelli - V5905CV - knife
Intended use: Sport
Type of production: Industrial
Blade production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade treatment: Dark stone washed
Handle: Canvas micarta green
Blade length: 108mm.
Blade thickness: 4.2mm.
Closed length: 143mm.
Total length: 253mm.
Closed thickness: 19mm.
Balancing: - Weight: 250g.
Closure: Back Lock with two wire springs
Clip: Tempered AISI420 steel with stonewashed treatment
Scabbard: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" SilvestrelliV5905CV -
Viper - Lille 2 Fixed Knife by Vox - Elmax Green Canvas Micarta - VT4024CG - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Stonewashed
Handle: Green Canvas Micarta
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 100g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4024CG -
Viper - Lille 2 Fixed Knife by Vox - Elmax Artic Storm Carbon Fiber - VT4024FCA - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: full tang in Elmax SuperClean 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Carbon Fiber "Artic Storm"
Blade length: 70mm.
Blade thickness: 3.5mm.
Total length: 170mm.
Weight: 105g.
Sheath: kydex, with UltiClip attachment clip
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesVT4024FCA -
Viper - Orso 2 by Jens Anso - 3D Titanium - V5996TI3D - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Satin finish
Handle: Titanium GR5 with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5996TI3D -
Aitor - Ferfal Outdoor knife - N680 steel - 16099 - knife
Intended use: Collection / Outdoor
Blade: Full tang in stainless steel N680 at 57 / 58HRC
Handle: In metal
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 295mm.
Weight: 367g.
Sheath: in polymers and cordura with the following accessories:* Skinner
* Sharpening stone
* survival kit includes:
- Fishing kit
- Sewing kit
- Scalpel
- Seasonings
- Tweezers
Packaging: cardboard with Aitor logosAI-16099 -
Viper - Hug CG knife by Sacha Thiel - Titanium and G10 ivory - M390 steel - V5992GI - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: in titanium with ivory G10 grips
Blade length: 71mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 184mm.
Thick when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Sheath: in leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5992GI -
Viper - Hug 2 FCB knife by Sacha Thiel - Titanium and Carbon Fiber - M390 steel - V5994FCB - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: titanium with blue carbon fiber grips
Blade length: 71mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 184mm.
Thick when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Sheath: in leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5994FCB -
Viper - Hug CG knife by Sacha Thiel - Titanium and Micarta - M390 steel - V5992CG - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: in titanium with micarta grips
Blade length: 71mm.
Blade thickness: 3mm.
Closed length: 112mm.
Total length: 184mm.
Thick when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Sheath: in leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5992CG -
Aitor - Jungle King I knife Satin - 16015 - knife
The Jungle King is a sturdy multipurpose knife produced by the Spanish Aitor for survival use. Thanks to the presence of a large amount of accessories and mini survival kits present in the sheath and in the handle, this knife is a perfect companion for outdoor use. The metal end cap equipped with a compass can be unscrewed and the hollow handle contains a kit of accessories useful in a hiking environment. Inside the sheath there is also a steel skinner knife.
Intended use: Collection
Blade: Full tang in stainless steel 90Cr18MoV (440C) at 57 / 58HRC
Handle: In metal
Blade length: 205mm.
Blade thickness: 5mm.
Total length: 355mm.
Weight: 607g.
Sheath: in polymers and rope with multipurpose inserts (compass - tourniquet - plasters - pins - hooks - possibility to make a sling using the sheath - bottle opener and more).
Packaging: cardboard with Aitor logosAI-16015 -
Viper - Turn Knife by Silvestrelli - Titanium and G10 Black - M390 Steel - V5986GB - Knife
Destination of use: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: in stainless steel M390 60 / 61HRC
Lama treatment: satin pattern
Handle: titanium with black G10 cheeks
Lama length: 80mm.
Lama thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Closed thickness: 14mm.
Weight: 123g.
Closure: Back Lock
Clip: Titanium
Sheath: Leather
Package: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5986GB -
Viper - Fearless by T. Rumici - Satin & Carbon Fiber - VT4016FC - knife
Intended Use: Tactical / Light Utility
Production Type: Industrial
Country of Production: Italy
Blade: Full tang, Sleipner steel 59/61HRC
Blade Finish: Satin finish
Handle: Carbon Fiber
Blade length: 152mm.
Blade thickness: 6mm.
Total length: 296mm.
Balance: backward
Weight: 260g.
Scabbard: Kydex with Tek-Lok multi-position locking system.
Package: Cardboard box with Viper Knives logos
Notes: Design by Tommaso Rumici - 2021 version of the Fearless model, originally produced in 2006 with N690Co stainless steel.VT4016FC -
Viper - Berus 1 by T. Rumici - Carbon Fiber - VT4012FC - knife
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon fiber
Blade length: 67mm.
Blade thickness: 4mm.
Total length: 154mm.
Weight: 95g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Tommaso RumiciVT4012FC -
Aitor - Cocker navaja knife - 345.180 - 6.5 cm - knife
Vintage folding knife made by the well-known Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood with Cocker engraving
Blade length: 65mm.
Blade thickness: 3mm.
Total length: 163mm.
Balancing:
Weight: 83g.
Blade lock: back lock345.180 -
Viper - Turn knife by Silvestrelli - Titanium and Walnut Wood - M390 steel - V5986NO - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: in titanium with walnut wood grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 113g.
Closure: Back Lock
Clip: titanium
Sheath: leather sheath
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5986NO -
Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 107g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5982CB -
Viper - Drop Tulipano by Fabrizio "Silvester" Silvestrelli - 5700TW knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Nitro-B stainless steel
Blade treatment: -
Handle: in tulip, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio Silvestrelli5700TW -
Aitor - Brama navaja knife - knife
Vintage folding knife made by the famous Spanish house Aitor
Intended use: Sports
Type of production: semi-artisanal
Blade: 440 stainless steel
Blade treatment: -
Lama production: Spanish
Handle: brass and wood
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 200mm.
balancing:
Weight: 130g.
Sheath: -AI-BR -
Viper - Key SlipJoint by Vox - G10 Black - V5976GB - knife
Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.
The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without insignia, in order to blend in with the style of its owner.
All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: 1.4034 and G10 stainless steel
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 70g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5976GB -
Viper - Key SlipJoint by Vox - green micarta - V5976CV - knife
Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.
The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without insignia, in order to blend in with the style of its owner.
All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: 1.4034 Stainless Steel and Micarta
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 70g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5976CV -
Viper - Key SlipJoint by Vox - anodised titanium - V5976D3BL - knife
Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.
The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without insignia, in order to blend in with the style of its owner.
All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: Titanium GR5 Anodized
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5976D3BL -
Viper - Key SlipJoint by Vox - titanium and bronze carbon fiber - V5978FCB - knife
Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.
The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without insignia, in order to blend in with the style of its owner.
All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: Titanium GR5 and Carbon Fiber Bronze
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5978FCB -
Viper - Key SlipJoint by Vox - Titanium and Micarta - V5978CV - knife
Presented at the 2019 Shot Show, Key is Viper's first dorsal spring slip-joint. Designed by Jesper Voxnaes, this closable with two-handed opening is a daily luxury to be savored without haste, a daily companion like a classy pen or a watch of fine manufacture.
The Key is offered in different handle variants, with details ranging from tradition to modernity, with or without bolsters, so as to go best with the style of its owner.
All have in common the refined hand-made filework that decorates the spring, giving the knife the typical, surprising, elegance that has always distinguished Viper “Gentleman” knives. The 3 mm thick, satin-finished Böhler M390 steel blade offers excellent and long-lasting cutting performance, accentuated by full bevel.
Intended use: Gentleman / EDC
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60-61HRC
Blade treatment: Satin finish
Handle: Titanium GR5 and micarta
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thick when closed: 10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Sheath: leather bag
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5978CV -
Viper - knife with engraving - ebony - duck - by Rizzini - V4000 Limited Edition
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: 420 55 / 56HRC stainless steel
Blade treatment: -
Handle: Ebony
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 80mm.
Total length: 137mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: wooden box
Notes: Limited Edition with hand engraving by master engraver Aldo RizziniVI-4000-P-R -
Viper - Gianghi Olive Wood design by Fabrizio Silvestrelli - V4880UL - knife
Intended use: Light Utility / Hunting
Type of production: Industrial
Country of production: Italy
Blade: Full Tang in N690Co stainless steel
Blade treatment: satin finish
Handle: olive wood
Blade length: 115mm.
Blade thickness: 5mm.
Total length: 250mm.
Balancing: 3cm back
Weight: 245g.
Sheath: brown leather
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV4880UL -
Viper - Novis by Silvestrelli - Green Canvas Micarta - V5972CV - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: Micarta
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 115g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5972CV -
Viper - Novis by Silvestrelli - titanium bolsters and carbon fiber - V5974FC - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: GR2 Titanium and Carbon Fiber
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 135g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5974FC -
Glock - Field Knife with saw - Sand - knife
The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.
BACK SIGNED
Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic PolymersG81-SA -
Glock - Field Knife 81 knife with saw - Gray - knife
The Glock knives were developed in close cooperation with the Special Force Ranger Austrian army. To achieve the best performance and functionality, were not allowed compromises in design, tested after years of service in the field. The knife is so perfectly balanced, used as a pure fighter, such as a utility knife or throwing knife.
BACK SIGNED
Blade: Carbon steel painted in 1050
Handle material: Thermoplastic Polymers
Blade length: 165 mm.
Blade Thickness: 5 mm.
Total length: 290 mm.
Weight: 205 g.
Sheath: Thermoplastic PolymersG81-GY -
Viper - Koi by Vox - Carbon Fiber - VT4010FC - knife
Intended use: hunting / sporting
Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel M390 59 / 60HRC
Blade treatment: Satin
Handle: Carbon fiber
Blade length: 88mm.
Blade thickness: 3.8mm.
Total length: 200mm.
Balancing: -
Weight: 108g.
Sheath: in Kydex
Packaging: cardboard box with Viper logos
Notes: design by Jesper VoxnaesVT4010FC -
Viper - Orso Knife Black G10 - M390 - by Jens Anso V5968GB - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: G10
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 90g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5968GB -
Viper - Orso Knife Titanium - M390 - by Jens Anso V5966TI - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: titanium
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 120g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5966TI -
Viper - Orso Knife Carbon Fiber - M390 - by Jens Anso V5966FC - Knife
Brand new collaboration between the famous Knife Maker Jens Anso and Viper company, based in Maniago (Italy)
Intended use: Sports / Collection
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60 / 61HRC
Handle: carbon fiber
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 11mm.
Balancing: -
Weight: 80g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Packaging: cardboard box with Viper logos
Note: -V5966FC -
Viper - Lille knife by Vox - Titanium brown frame lock - V5962TIBR - knife
Intended use: Gentleman / EDC
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5962TIBR -
Viper - Lille knife by Vox - Titanium Blue frame lock - V5962TIBL - knife
Intended use: Gentleman / EDC
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5962TIBL -
Viper - Lille knife by Vox - Titanium - V5962TITI - knife
Intended use: Gentleman / EDC
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 64mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 155mm.
Thick when closed: 11mm.
Balancing: -
Weight: 83g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5962TITI -
Viper - Kyomi by Vox - Titanium and G10 Green - V5940GG - knife
Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Green G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5940GG -
Viper - Larius by Silvestrelli - Titanium Satin - V5958TI - knife
Purpose of use: Sportsman / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Titanium with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 146g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5958TI -
Viper - Larius by Silvestrelli - Carbon Fiber Satin - V5958FC - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: carbon fiber with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 94g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5958FC -
Viper - Larius by Silvestrelli - Black G10 Stone Washed - V5960GB - knife
Purpose: sport / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 with anodized titanium spacer
Blade Length: 85mm.
Blade thickness: 4mm.
Closed length: 110mm.
Overall length: 192mm.
Closure thickness: 14mm.
Weight: 102g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Stainless Steel Liner Lock 1.4116
Clip: Anodized titanium, made from full, removable
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5960GB -
Viper - Skinner Cocobolo knife - V4565FCB knife
Use: hunting / collection
Type of production: industrial
Production Blade: Italy
Blade: integral, steel 440
Blade Treatment: -
Manicure: Paracord
Blade Length: 100mm.
Blade thickness: 4mm.
Total length: 220mm.
Balance: backward
Weight: 185g.
Sheath: leather sheath
Packing: -
Notes:V4565FCB -
Viper - Rasolino Ziricote by Fabrizio Silvestrelli - V5750ZI - regional knife
Typical Sicilian knife originally from Catania, in use since the mid-nineteenth century. Is characterized by the truncated blade tip, similar to a barber-free hand-shaver.
Purpose: Collection / Sportsman
Type of production: Industrial
Country of production: Maniago - Italy
Blade: Stainless steel 1.4116 55 / 57HRC
Blade treatment: satin finish
Handle: Bovine horn point
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 205mm.
Weight: 100g.
Closure: double spring retention on inner liners
Sheath: Suede leather bag with Viper logos
Packing: black cardboard case with silver logos, warranty certificate
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" SilvestrelliV5750ZI -
Viper - Rasolino Horn by Fabrizio Silvestrelli - V5750PC - regional knife
Typical Sicilian knife originally from Catania, in use since the mid-nineteenth century. Is characterized by the truncated blade tip, similar to a barber-free hand-shaver.
Purpose: Collection / Sportsman
Type of production: Industrial
Country of production: Maniago - Italy
Blade: Stainless steel 1.4116 55 / 57HRC
Blade treatment: satin finish
Handle: Bovine horn point
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 205mm.
Weight: 100g.
Closure: double spring retention on inner liners
Sheath: Suede leather bag with Viper logos
Packing: black cardboard case with silver logos, warranty certificate
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" SilvestrelliV5750PC -
Viper - Golia Evoluzione by T. Rumici - Green Micarta - VT4003ECG - knife
Use: Light Utility
Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 5.8mm.
Overall length: 252mm.
Balancing: back 1cm
Weight: 280g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso RumiciVT4003ECG -
Viper - Fortis by Vox - Carbon Fiber - V5950FC - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin finish
Handle: Carbon Fiber and Titanium
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 114g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5950FC -
Viper - Fortis by Vox - Titanium - V5950TI - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin finish
Handle: Titanium
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 115g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5950TI -
Viper - Italo by Silvestrelli - G10 Black - V5948GB - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel M390 MicroClean sintered and tempered vacuum; double tempering and cryogenic treatment; HRC 60/61
Blade treatment: Satin
Handle: G10 with 1.4116 stainless liners
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Overall length: 220mm.
Weight: 122g.
Lock: Liner Lock
Clips: stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli - Opening on ball bearings - opening via Carson Flipper system12611 -
Viper - Italo by Silvestrelli - Titanium Framelock - V5944TI - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390
Blade treatment: Satin
Handle: GR2 Titanium
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Total length: 220mm.
Weight: 188g.
Closing: Framelock
Clips: stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli - Opening on ball bearings - opening via Carson Flipper system12560TI -
Viper - Italo by Silvestrelli - Titanium Framelock and Orange G10 - V5944GO - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390
Blade treatment: Satin
Handle: GR2 Titanium and G10
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Total length: 220mm.
Weight: 188g.
Closing: Framelock
Clips: stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli - Opening on ball bearings - opening via Carson Flipper system12560 -
Viper - Italo by Silvestrelli - Titanium Framelock and Carbon Fiber - V5944FC - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390
Blade treatment: Satin
Handle: Titanium and Carbon Fiber
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 125mm.
Total length: 220mm.
Weight: 180g.
Closing: Framelock
Clips: stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio Silvestrelli - Opening on ball bearings - opening via Carson Flipper system12526 -
Viper - Kyomi by Vox - Titanium and Carbon Fiber - V5934FC - knife
Viper - Kyomi by Vox - Titanium and Carbon Fiber - V5934FC - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Carbon fiber
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 120g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5934FC -
Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife
Viper - Kyomi by Vox - Titanium and G10 Orange - V5940GO - knife
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium and Orange G10
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 128g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5940GO -
Viper - Kyomi by Vox - Titanium - V5934TI - knife
Kyomi is a compact frame lock knife which combines the unmistakable design of Jesper Voxnaes with innovative features, such as ball bearings and two different back spacers. Comfortable to hold and carry, thanks to smooth edges and a robust reversible titanium clip, it is available with the left scale made of different materials.
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Titanium
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 107mm.
Overall length: 184mm.
Thick when closed: 18mm.
Balancing: -
Weight: 156g.
Closure: Frame Lock with steel swing
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5934TI -
Viper - Free - Stone Washed - Black G10 - V4892BK - knife
With Free, designed by Moreno and Thomas Franzin Rumici, Viper has set a new record in the field of security. The new system Smartlock, used for the first time on this lockable, solves all the problems that can afflict the classic architecture liner-lock. In addition, thanks to the practical cursor column, the user can choose to block completely the mechanics.
Intended use: EDC / SportsType of production: Industrial
Production Blade: Italy
Blade: Stainless D2 to 58/60HRC
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 86mm.
Blade thickness: 3.6mm.
Closed Length: 120mm.
Total length: 210mm.
Thick when closed: 14mm
Balance: -
Weight: 123g.
Lock: Liner Lock with patented SmartLock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Viper
Notes: Design by Moreno and Thomas Franzin Rumici12391 -
Viper - Odino by Vox Black - G10 Black - V5920GB - knife
Designed by the famous Danish designer Jesper Voxnaes, Odin is a lockable high-end housing architecture frame lock with rotation system of bearings and the use of noble materials and technology (full frame titanium cheek and carbon fiber, titanium or G-10). The unique style of Vox, is influenced by Scandinavian design that the American cutlery, the attention to detail and excellence of workmanship typical of a knife Viper create completely original and of high quality.
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Black
Handle: G10 and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 100mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 130g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5920GB -
Viper - Odino by Vox Black - Titanium - V5920TI - knife
Designed by the famous Danish designer Jesper Voxnaes, Odin is a lockable high-end housing architecture frame lock with rotation system of bearings and the use of noble materials and technology (full frame titanium cheek and carbon fiber, titanium or G-10). The unique style of Vox, is influenced by Scandinavian design that the American cutlery, the attention to detail and excellence of workmanship typical of a knife Viper create completely original and of high quality.
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Black
Handle: Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 100mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 155g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5920TI -
Viper Ten by Fabrizio Silvestrelli - Micarta Burgundy - V5922CBR - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel Böhler N690Co; tempered vacuum and cryogenic treatment; HRC 57/59
Treatment Lama: Satin
Handle: Canvas Burgundy Handle with GR2 anodized titanium spacer
Blade length: 85mm.
Blade thickness: 3.7mm.
Length closed: -
Overall length: 190mm.
Balancing: -
Weight: 110g.
Closing: liner lock evolution; liner: GR5 titanium (Ti6Al4V) with micro-adjustment system
Clip: Stainless steel brushed
Swing mechanism: thrust bearings
Packaging: cardboard box with logos Viper
Notes: Design by Fabrizio SilvestrelliV5922CBR -
Viper Ten by Fabrizio Silvestrelli - Green G10 - V5922GGR - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel Böhler N690Co; tempered vacuum and cryogenic treatment; HRC 57/59
Treatment Lama: Satin
Handle: G10 Green with spacer titanium GR2 anodized
Blade length: 85mm.
Blade thickness: 3.7mm.
Length closed: -
Overall length: 190mm.
Balancing: -
Weight: 110g.
Closing: liner lock evolution; liner: GR5 titanium (Ti6Al4V) with micro-adjustment system
Clip: Stainless steel brushed
Swing mechanism: thrust bearings
Packaging: cardboard box with logos Viper
Notes: Design by Fabrizio SilvestrelliV5922GGR -
Viper Ten by Fabrizio Silvestrelli - Carbon Fiber - V5922FC - knife
Intended use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel Böhler N690Co; tempered vacuum and cryogenic treatment; HRC 57/59
Treatment Lama: Satin
Handle: carbon fiber with titanium spacer GR2 anodized
Blade length: 85mm.
Blade thickness: 3.7mm.
Length closed: -
Overall length: 190mm.
Balancing: -
Weight: 110g.
Closing: liner lock evolution; liner: GR5 titanium (Ti6Al4V) with micro-adjustment system
Clip: Stainless steel brushed
Swing mechanism: thrust bearings
Packaging: cardboard box with logos Viper
Notes: Design by Fabrizio SilvestrelliV5922FC -
Viper - Dan2 by Tommaso Rumici - Canvas Burgundy - V5930CBR - knife
Intended Use: Sport / EDC
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: Satin
Handle: Canvas micarta with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper Logos
Notes: Design by T. RumiciV5930CBR -
Viper - Dan2 by Tommaso Rumici - Carbon Fibre - V5930FC - knife
Intended Use: Sport / EDC
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: Satin
Handle: Carbon fiber with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici12303 -
Viper - Odino by Vox - Carbon Fibre - V5918FC - knife
Designed by the famous Danish designer Jesper Voxnaes, Odin is a lockable high-end housing architecture frame lock with rotation system of bearings and the use of noble materials and technology (full frame titanium cheek and carbon fiber, titanium or G-10). The unique style of Vox, is influenced by Scandinavian design that the American cutlery, the attention to detail and excellence of workmanship typical of a knife Viper create completely original and of high quality.
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Stonewashed
Handle: Carbon Fibre and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 100mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 125g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper VoxnaesV5918FC