Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
DPX Gear - H.E.F.T. 4 "Assault Fixed Blade - PRIVATE COLLECTION - knife
H.E.F.T. Hostile Environment Field Tool
Knife born from the collaboration between the American DPX Gear and the Italian company Lion Steel.Knife withdrawn from a private collection - Globally in excellent condition, complete with original box and certificates - Checked, certified by our in-house Coltelleria Collini laboratory.
Intended use: Sports / Tactical
Type of production: Semi-Industrial
Production Lama: Italy
Blade: Sleipner Steel 60HRC
Blade treatment: black satin TiCN PVD coating
Handle: G10 Black
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: central
Weight: 200g.
Designed: by Tommaso Rumici & Robert Young Pelton
Sheath: cordura
Packaging: cardboard box with DPX GEAR logosAP-DPHFX002 -
Rockstead - Chou knife HPC Red Silk - USED - Neck Knife - Knife
Withdrawn knife from a private collection - Used, globally in good condition. Scratches on the blade - Checked, sharpened and certified by our internal laboratory Collini Cutlery.
Blade: Hitachi YXR7 65HRC steel with HPC treatment
Handle: hand-tied weave
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: from the neck, in Kydex
Notes: Accompanied by silk bag and warranty certificate with technical specificationsWith the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
RO-CHU-U -
Ontario Knife Company - Hunt Plus Skinner - 9716 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9716 -
Ontario Knife Company - RAT 7 Micarta - knife
Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: Micarta
Blade length: 179mm.
Blade thickness: 5mm.
Overall length: 311mm.
Balance: on guard branch
Weight: 357g.
Sheath: Nylon, with rigid internal
Packaging: cardboard box with Ontatio Knife Company logosON8668 -
Ontario Knife Company - RAT 3 Micarta - knife
Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: micarta
Blade length: 95mm.
Blade thickness: 4.5mm.
Overall length: 270mm.
Balance: on guard branch
Weight: 147g.
Sheath: ABS, coupling with Tek-Lok type or clip system
Packaging: cardboard box with Ontatio Knife Company logosON8665 -
Boker Plus - Jim Wagner Reality-Based Blade - PRIVATE COLLECTION - 01BO053
Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO053 -
Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.
The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.
The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.
Intended Use: Sporting/Collection
Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydexSOG-S37SEAL-CP -
SOG - Vulcan Black TiNi - VL11 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collectionSOGVL11-CP -
Zero Tolerance - MUDD Folding Knife - ZT0500 - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model no longer in production.
The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.
The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.
The handle is made of aluminum with textured G-10 grips, providing a solid grip.
This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.
NOS FULL SET KNIFE, NEW FROM STOCK
Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratoryAP-ZT0500 -
Ka-Bar - Vintage '80s - USMC Fighting Knife - 1217 - USATO - coltello
COLTELLO USATO, RITIRATO DA COLLEZIONE PRIVATA
* Tipologia: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzato
* Condizioni: Globalmente in buone condizioni
* Reperibile in commercio: Attualmente in produzione, con differenti finiture del cuoio
* Affilatura: Riaffilato professionalmente
* Segni su lama: Diversi segni di usura che conferiscono carattere e non ne limitano la funzionalità
* Segni su impugnatura: Segni di usura su guardia e pomolo, cuoio del manico in buono stato
* Scatola: Assente
* Fodero: Assente
* Manuali, Certificati e Garanzie: No
* Controllato e Certificato dal nostro laboratorio internoIl KA-BAR USMC è considerato uno tra i più famosi coltelli al mondo. Venne originariamente ideato per le truppe degli Stati Uniti nella Seconda Guerra Mondiale e da allora la sua efficacia è stata universalmente riconosciuta e impiegata in tanti altri scenari militari.
Destinazione d'uso: Tattico/Militare
Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 305mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Fodero: in cuoio
Note: Produzione degli anni 80 (presumibilmente 1984/1986), precedentemente acquistato ed etilizzatoKB-US1217CP -
Zero Tolerance - ZT0223 - Tim Galyean Military Flipper - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like-new condition
* Commercially available Discontinued as of 2022
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present (but from a different ZT knife).
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Sporting / Collection
Type of Production: Industrial
Country of Production: USA
Blade: Stainless steel CPM-20CV
Blade Treatment: Black DLC
Handle: Titanium Black DLC and G10
Blade length: 89mm.
Blade thickness: 4mm.
Length closed: 128mm.
Total length: 218mm.
Thickness when closed: 14mm.
Weight: 134g.
Closure: Framelock
Clip: Removable, reversible, stainless steel
Packaging: cardboard box with Zero Tolerance logos
Notes: Design by Tim Galyean - KVT opening on ball bearings - Carson Flipper opening system
Translated with DeepLZT0223CP -
Fox - Spartan Defender Combat Knife - SF-CC03 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: knife from 2014 previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Out of production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Slight superficial rub marks on matte finish.
* Marks on handle: Small superficial marks on pommel and guard.
* Box: Not present
* Scabbard: Present, original, fiberglass, nylon and cordura sheath with stainless steel thread cutter.
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Knife launched on the market in 2014 by Fox Knives, civilian version of their Spartan Defender Military Bayonet. It has the distinction of having a trapezoidal polymer handle with the blade offset upward from the user's grip. Model now discontinued and replaced by the "Spartan 2 Leonidas" currently in production, decidedly more canonical in appearance, conformation and materials.
Intended Use: Collection / All Round Utility / Tactical
Country of Production: Italy
Blade: Stainless Steel N690Co 59/60HRC with MILSPEC MIL-C-13924 treatment
Handle: NATO Black 9011 forprene and 316L stainless steel with MILSPEC MIL-C-13927 treatment
Blade length: 185mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: On the lower guard branch
Weight: 390g.
Sheath: made of high-strength fiberglass with Cordura and ballistic Nylon exterior. The main sheath is equipped with a wire cutter plate.
Notes: knife from 2014 previously purchased and from private collection - discontinued itemSF-CC03-AP -
Camillus - 1985 Vintage Air Force Pilot Survival - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: various marks given by time and use.
* Marks on handle: normal signs of time.
* Box: not present
* Scabbard: present, original, leather, with signs of time.
* Manuals, Certificates and Warranties: not present.
* Checked and Certified by our in-house laboratory.
Created as a cutting tool and emergency instrument for U.S.A.F. pilots, the Camillus Pilot has managed to win a solid reputation worldwide for both its legendary sturdiness and its successful and attractive aesthetics.
Intended Use: Collection/Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: hidden tang, made of 1095 carbon steel
Blade finish: epoxy powder
Handle: pressed leather rings
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 243mm.
Weight: 255g.
Sheath: leather
Packaging: -
Notes: 1985 knife withdrawn from private collectionAP-CPILOT -
Ontario Knife Company - RAT 3 Skinner Micarta - 8661 - knife
Intended use: tactical/sporting
Type of production: Industrial
Country of manufacture: USA
Blade: Fulltang, 1095 black textured powder coated steel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 197mm.
Balance: advanced
Weight: 200g.
Sheath: leather, for vertical carrying on belt
Packaging: cardboard box with Ontatio Knife Company logos.ON8661 -
Raidops - Soldier Spirit RD - K082 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Not present
* Scabbard: Original, like new
* Manuals, Certificates and Warranties: Not present
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Allround Utility
Production type: Industrial
Country of Production: Taiwan
Blade: D2 57/59HRC carbon steel
Blade Finish: Blackwashed
Handle: G10
Blade length: 148mm.
Blade thickness: 6mm.
Total length: 285mm.
Balance: slightly backward
Weight: 433g.
Sheath: made of kydex, with Tek-Lok type attachment
Packaging: -
Notes: previously purchased knife, from private collectionAP-RAID-K082 -
Richartz Solingen - Multipurpose 6 uses - Christoforo Colombo 1492-1992 - Limited Edition - PRIVATE COLLECTION
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Conditions: in like new condition
* Commercially available: Out of production, model dating back to the 90s
* Sharpening: Factory
* Marks on blade: No
* Signs on handle: No
* Box: with original box in perfect condition
* Sheath: -
* Manuals, Certificates and Warranties: certificate with serial number
* Checked and Certified by our internal laboratory
Intended use: Collection / Vintage / MultipurposeType of production: artisanal
Country of production: Germany
Blade: stainless steel
Blade finish: satin finish
Handle: engraved wood
Blade length: 68mm.
Blade thickness: 2.0mm.
Total length: 155mm.
Balancing:
Weight: 130g.
Scabbard: -
Packaging: -
Notes: Vintage 90s knifeAP-RS-CC1992 -
CKF - Kadat Limited Edition by Alex Vorobyov - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available: Discontinued, made in 2018 in only 300 pieces, individually numbered
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Original Nylon case with accessories.
* Scabbard: Not provided
* Manuals, Certificates and Warranties: Certificate with serial number and signature.
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / Collection
Type of production: Midtech (semi-craft)
Country of manufacture: Russia
Blade: stainless steel M390
Blade treatment: Bkacwashed
Handle: bronze anodized titanium with carbon fiber inserts
Blade length: 111mm.
Blade thickness: 4mm.
Length closed: 131mm.
Total length: 250mm.
Thickness when closed: 13mm.
Weight: 167g.
Closure: Frame Lock
Clip: titanium machined from solid, with Timascus insert
Notes: knife from private collection, previously purchased, made in only 300 individually numbered examplesCKF-KAD-CP -
Zero Tolerance - Scavenger Matte knife Black - PRIVATE COLLECTION - ZT0400 knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: in like new condition
* Commercially available: no longer in production since 2014
* Sharpening: factory sharpening
* Marks on blade: no marks
* Marks on the handle: no marks
* Box: original ZT box
* Manuals, Certificates and Guarantees: ZT certificates
* Checked and certified by our internal laboratory Coltelleria ColliniIntended use: Tactical / Military
Type of production: Industrial
Production Lama: USA
Blade: CPM-S30V steel
Blade treatment: Tungsten DLC Coating
Handle: Black anodized aluminum with non-slip Trac-Tec inserts
Blade length: 925mm.
Blade thickness: 4mm.
Closed length: 126mm.
Total length: 215mm.
Thick when closed: 17mm.
Balancing: -
Weight: 146g.
Closure: Liner Lock
Clip: Removable, Multiposition, in stainless steel
Sheath: -
Packaging:
Notes: Design by Ken Onion - SpeedSafe opening systemAP-ZT0400CP -
Master of Defense - Point Man Plain Edge - Trident Utility knife - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model produced by Master of Defense around late 90s/early 00s and designed by James "Patches" Watson - Excellent condition. Never resharpened - No original box - Checked and certified by our workshop.
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM black
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 88mm.
Blade thickness: 3.5mm.
Length closed: 112mm
Total length: 200mm.
Thickness when closed: 13mm
Weight: 116g.
Closure: Liner Lock
Clip: removable, stainless steel
Notes: knife withdrawn from private collection in excellent conditionMOD-PMPE-CP -
Chris Reeve - Neil Roberts Warrior Knife Fixed Blade 6" - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Unobtainable specimen, now out of production - Like new, perfect, undamaged, never taken out of the box - Complete with every certificate - Perfect original factory sharpening - Absolutely flawless specimen - Checked and certified by our in-house laboratory
Intended Use: Fighter / Tactical / Collection
Type of manufacture: Midtech
Blade: stainless steel CPM-S30V 55/57HRC
Country of Production: USA
Handle: Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Total length: 290mm.
Balance: set back 1cm. from the lower guard branch
Weight: 356g.
Sheath: by SpecOps, cordura
Notes: Discontinued and unobtainable specimen - withdrawn from private collection - New, intact, perfect, never used, with original box and warranty certificatesCR-NR-CP -
ExtremaRatio - BF1TD Black - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - "TD" version now discontinued and no longer available - Overall in good condition - Shows small marks on both blade and handle, but nothing that compromises its actual use - Original factory sharpening still in good condition, definitely can be improved - Accompanied by original Extrema Ratio box and certificates and warranties - Checked and certified by our in-house laboratory.
Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of manufacture: Italy
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 82g.
Closure: Liner Lock
Clip: reversible and removable stainless steel
Notes: knife withdrawn from private collection, overall in good conditionER-BF1TDBK-CP -
Master of Defense - ATFK - Advanced Tactical Folding Knife - PRIVATE COLLECTION - folding knife
Tactical / EDC knife produced in the late 1990s withdrawn from private collection - overall in excellent condition - with factory sharpening in good condition- no packaging or manuals - checked and guaranteed by our in-house laboratory.
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janick, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production type: Industrial
Country of manufacture: USA
Blade: 154CM stainless steel with titanium nitriding
Handle: aircraft aluminum with non-slip Kraton inserts
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 197mm.
Thickness when closed: 13mm
Weight: 108g.
Closure: Button Lock
Clip: removable, stainless steel
Packaging: knife withdrawn from private collection, overall in very good conditionMOD-ATFK-CP -
ExtremaRatio - MF0 Black Drop Rough - PRIVATE COLLECTION - folding knife
Knife withdrawn from private collection. Overall in good condition shows small marks on clip, hardware and handle - Original factory sharpening in good condition - Complete with original Extrema Ratio cardboard box - Checked and certified by our in-house laboratory.
Intended Use: Tactical/Sportsman
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: rough anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: Removable and reversible stainless steel
Packaging: cardboard box with Extrema Ratio logosAP-MF0DR-CP -
ExtremaRatio - Landing Force Titanium - Italian Army Landing Troops - PRIVATE COLLECTION - knife
Knife from private collection - Very rare knife from 2015, discontinued for several years, in min conditions - Comes with original packaging (box, protective plastics, manuals) and accessories (sheath and straps) - Never used, with original factory sharpening - Checked and certified by our in-house laboratory.
Multi-role non-magnetic knife, developed and officially acquired by the landing troops of the Italian Army. Totally titanium blade and tang make the knife particularly resistant to oxidation and usable for magnetic trigger buried ordnance search (mine probing).
Intended Use: Tactical / Military / Sub / AmphibiousProduction type: Industrial
Country of Production: Italy
Blade: Titanium Beta 40HRC
Blade Finish: Burnishing
Handle: Forprene
Blade Length: 180mm.
Blade thickness: 6.3mm.
Total length: 310mm.
Weight: 195g.
Sheath: Desert nylon, with ABS hard shell; M.O.L.L.E. type thigh straps and attachments.
Packaging: Cardboard box, certificates, manuals
Notes: Widia glass breaker on rear tang.ER-LFT-CP -
Wander Tactical - Franken Folder - Raw & Burnt Green Micarta - PRIVATE COLLECTION - custom knife
Knife from private collection - Knife in mint condition, brand new - Checked and certified by our in-house laboratory.
Intended Use: Collection / Heavy Duty
Type of production: Handcrafted
Country of manufacture: Italy
Blade: D2 steel at 59/61HRC with cryogenic hardening
Blade treatment: Raw
Handle: 2mm titanium folders with micarta handle
Blade length: 93mm.
Blade thickness: 5mm.
Length closed: 124mm.
Total length: 214mm.
Thickness when closed: 24mm.
Weight: 167g.
Opening: Carson Flipper system / Ambidextrous opening pins on blade
Closure: Rockers Arm 8.11
Clip: stone washed titanium, removable and reversible
Packaging: -
Notes: Limited Edition handcrafted by Dino Picco of Wander TacticalWT-FF-RB-CP -
Ontario - RAT 3 Randall's Adventure Training D2 - Full Set - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like new
* Commercially available: Discontinued - the company has permanently ceased operations.
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, new and perfect
* Scabbard: Present, like new.
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory
Intended Use: hiking / utility
Production type: Industrial
Country of manufacture: USA
Blade: Fulltang, D2 steel with powder finish
Handle: Micarta
Blade length: 99mm.
Blade thickness: 3.5mm.
Total length: 200mm.
Balance: backward
Weight: 157g.
Sheath: thermoplastic, with TEK-LOK attachment
Notes: knife like new, withdrawn from private collectionONRAT3-CP -
Spyderco - Native 5 Lightweight Black TiNi - C41PSBBK5 - PRIVATE COLLECTION - Knife
Knife taken from a private collection. Overall in very good condition, including the edge: there are a few small marks on the right side of the blade (see photo). Complete with Spyderco cardboard box but belonging to another Native 5 model (C41SBK5). Checked and certified by our in-house laboratory Coltelleria Collini.
Intended use: Sporting / Collection
Production Type: Industrial
Blade Production: USA
Blade: CPM-S35VN Powder Steel
Blade Treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 70g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos, however belonging to another Native 5 model (C41SBK5)
Notes: -CP-C41PSBBK5 -
GiantMouse - GMF1-F by Vox & Anso - M390 PVD Stonewashed - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Absolutely like new, untouched, never used, never put in the sheath - Supplied with box and warranty - Checked and certified by our in-house laboratory.
Intended Use: Sporting / HuntingType of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang stainless steel M390 59/61 HRC
Blade treatment: PVD Stonewashed
Handle: stainless steel M390
Blade length: 60mm.
Total length: 135mm.
Blade thickness: 5mm.
Weight: 70g.
Sheath: leather sheath
Packaging: Cardboard box with GiantMouse ACE logos
Notes: Design by Jens Anso & Jesper Voxnaes - Knife withdrawn from private collection, absolutely like newGM-GMF1-FAP -
Ontario Knife Company - Spec Plus SP-1 Combat Knife - 8679 - tactical knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm.
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -ON8679 -
Ontario Knife Company - MOD Mark 3 Navy Dive Knife - 6141 - knife
Intended Use: Multirole / Tactical
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1095 carbon steel
Blade treatment: Phosphated
Handle: Thermoplastic, with steel tang and guard
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 282mm.
Balance: backward
Weight: 294g.
Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
Package: Cardboard box with OKC logos
Notes: Knife produced and used for many decades by the U.S. naval forces.ON6141 -
Ontario Knife Company - Spec Plus SP-6 Fighting Knife - 8682 - tactical knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 323g.
Sheath: belt, in cordura and leather, vertical carry
Packaging: Cardboard box with OKC logos
Note: -ON8682 -
Master of Defense - LTT 875 Tanto knife - PRIVATE COLLECTION - folding knife
Knife withdrawn from a private collection - Rare model produced by the Master of Defense around 2005 - Excellent condition. Never resharpened - Without original box - Checked and certified by our internal laboratory Coltelleria Collini.
Master of Defense, an eclectic American brand no longer in business and later taken over by Blackhawk! Blades, produced various tactical and military type folding and fixed knives, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
The only copy at our disposal, without box, rare and out of production for many years.
Intended use: Tactical / Collection
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel - DLC
Handle: polymer with aeronautical aluminum inserts with Kraton anti-slip
Blade length: 90mm.
Blade thickness: 3.5mm.
Closed length: 130mm
Total length: 223mm.
Thick when closed: 20mm
Weight: 170g.
Closure: Button Lock
Clip: removable, in stainless steel
Packaging:MOD-LTT 875-CP -
Gerber - Spectre knife - 154cm - 06900 - PRIVATE COLLECTION - knife
Rare model produced by Gerber until 2003 - Knife taken from private collection - Overall in excellent condition, complete with original box and certificates - Checked, certified by our internal laboratory Coltelleria Collini.
Intended use: Tactical/Military
Blade: Stainless steel 154CM
Blade production USA
Handle: G10 with titanium folders
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 200mm.
Balance: -
Weight: 105g.
Closure: Liner Lock
Clip: Steel
Scabbard: -
Notes: -AP-06900 -
Ontario Knife Company - SP53 Bolo Knife - 8689 - knife
Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8689 -
Ontario Knife Company - TAK 2 knife - leather sheath - 8664 - knife
The TAK 2 is a fixed blade knife ideal for hunting, camping, survival and many other outdoor applications. The TAK 2 knife features a high carbon steel blade and a stabilized hardwood handle.
Intended use: Tactical / MilitaryType of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 116mm.
Blade thickness: 4.8mm.
Total length: 250mm.
Balance: 4cm back
Weight: 275 g.
Sheath: in leather
Packaging: Cardboard box with OKC logos
Note:ON8664 -
Ontario Knife Company - SP24 USN-1 Survival Knife - 8688 - knife
The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
Intended use: Tactical / MilitaryType of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 245mm.
Balancing: 3cm back
Weight: 225g.
Sheath: nylon, modular, compatible with M.O.L.L.E.
Packaging: Cardboard box with OKC logos
Note:ON8688 -
Ontario Knife Company - Spec Plus SP5 Bowie Survival - 8681 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8681 -
Ontario Knife Company - Journeyman knife 6155 - tactical knife
Made from the very famous 499 Pilot's Survival Knife (Air Force Survival Knife), the OKC Journeyman Knife is ideal for outdoor activities. The OKC Journeyman knife features a sturdy 10cm blade with a sawn back, made from 1095 high carbon steel with a black phosphated finish. The Ontario Journeyman Knife comes with a leather sheath and is entirely made in the USA.
Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: 1095 black texture powder coated steel
Handle: leather discs
Blade length: 10mm.
Blade thickness: 4.5mm.
Total length: 217mm.
Balancing: 2 cm back from the guard branch
Weight: 252g.
Sheath: in leather
Packaging: cardboard box with Ontatio Knife Company logosON6155 -
Ontario Knife Company - Bob Dozier Black Arrow Folder knife - 9101 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierO9101 -
EOS Elite Outfitting Solutions knife - PRIVATE COLLECTION - Black Surgeon Titanium - knife
Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.
Intended use: Tactical / EDC / Collection
Type of production: semi-artisan
Country of production: USA
Blade: in CTS-XHP Black stainless steel
Blade treatment: Black PVD
Handle: Grade 5 titanium
Blade length: 92mm.
Blade thickness: 5mm.
Length closed: 122mm.
Total length: 216mm.
Thick when closed: 13.2mm.
Balancing: -
Weight: 187g.
Opening: titanium thumbstood for right-handers
Washers: Steel ball bearings
Closing: Framelock
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-ST-CP -
We Knife Co. - Framelock Flipper knife Dual Tone Gray - PRIVATE COLLECTION - 605E - knife
Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery
Intended use: Sports / Collection
Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearingsWK-605E-CP -
Ontario Knife Company - Wyvern Crash Axe - 8693 - Axe
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Cutting length: 140mm.
Blade thickness: 6.5mm.
Total length: 480mm.
Balancing: advanced
Weight: 1130g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: transparent thermoplastic bag
Note: -ON8693 -
Ontario Knife Company - Hunt Plus Drop Point - 9715 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9715 -
Ontario Knife Company - EOD Karambit Ranger Micarta - 8672 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 90mm.
Blade thickness: 6.3mm.
Total length: 190mm.
Balancing: set back
Weight: 244g.
Sheath: nylon, belt, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8672 -
Ontario Knife Company - RD Tanto Ranger Micarta - 8677 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 175mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Balancing: slightly advanced
Weight: 522g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8677 -
Ontario Knife Company - TFI Ranger Micarta - 8678 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 135mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Balancing: slightly set back
Weight: 334g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8678 -
Ontario Knife Company - Spec Plus Alpha Survival - 9710 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: phosphated
Handle: in kraton
Blade length: 135mm.
Blade thickness: 4.7mm.
Total length: 260mm.
Balancing: slightly advanced
Weight: 184g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9710 -
Ontario Knife Company - FF6 Freedom Fighter - 8106 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 368g.
Sheath: belt, in cordura and leather, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON8106 -
Ontario Knife Company - SP10 Raider Bowie - 8684 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8684 -
Ontario Knife Company - ASEK Survival System Foliage Green - 1410 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1410 -
Ontario Knife Company - ASEK Survival System - 1400 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1400 -
Ontario Knife Company - SP8 Survival Machete - 8683 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON8683 -
Ontario Knife Company - Chimera Plain Edge - 6517 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in rubber, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5.2mm.
Total length: 345mm.
Balancing: set back
Weight: 424g.
Sheath: in polypropylene, modular, compatible with M.O.L.L.E., with integrated ceramic sharpener
Packaging: Cardboard box with OKC logos
Note: -ON6517 -
Ontario Knife Company - RAT 5 Micarta - knife
Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Balance: on guard branch
Weight: 326g.
Sheath: Nylon, with rigid internal
Packaging: cardboard box with Ontatio Knife Company logosON8667 -
Ontario Knife Company - 498 Marine Combat knife - knife
This knife is used exclusively by the United States Marine Corps and has been manufactured by the Ontario Knife Company for many years now.
Intended use: military / collection
Type of production: Industrial
Production Lama: America
Blade: 1095C carbon steel
Blade treatment: Phosphates
Handle: Painted leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 305mm.
Thick when closed: -
Balance: set back, at 1cm.
Weight: 284g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: transparent plastic bag
Note: -ON498 -
Ontario Knife Company - 499 Air Force Survival Pilot knife - knife
The Ontario Knife 6150, 499 Air Force Survival Knife, a classic among military blades, is still used today by the US military.
Made in the USA
Blade: 1095 carbon steel covered with epoxy powders
Handle: leather discs
Blade length: 127 mm.
Blade thickness: 4 mm.
Total length: 245 mm.
Weight: 250 g.
Sheath: Cordura and leatherON6150 -
Ontario Knife Company - RTAK2 Survival knife - knife
Intended use: Outdoor
Type of production: Industrial
Lama production: USA
Blade: 5160 carbon steel
Blade treatment: Powder Coat
Handle: Micarta
Blade length: 265mm.
Blade thickness: 4.7mm.
Total length: 425mm.
Balancing: -
Weight: 622g.
Sheath: in Nylon with MOLLE attachments.
Packaging: cardboard box with Ontario Knife Company logos
Note:ON8669 -
Ontario Ranger - Shank - Black Canvas Micarta Knife
Ontario Ranger - Shank - Black Canvas Micarta Knife
Intended Use: Tactical / sports
Type of production: Industrial
Production Blade: America
Blade: 1095 steel with black texture powder coated
Handle material: Micarta
Blade length: 150mm.
Blade thickness: 3mm.
Total length: 260mm.
Balance: on the branch guard
Weight: 190g.
Sheath: Nylon
Package: plastic bag2533-9