Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Microbead blasting
Handle: Walnut wood with through-guard and steel pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 350g.
Sheath: leather
Packaging: cardboard box with Fox logos
Notes: -

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless steel) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: Nylon, M.O.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence

For this new collaboration between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we have chosen the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the 5 mm Sanmai V-Toku2 steel produced by the Japanese Takefu Steel instead of the Niolox used in the standard model.

Specifically, the central plate is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to guarantee not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge-holding capacity together with easy resharpening and maintenance. At the same time, the blade has a remarkable resistance to corrosion and an important increase in resilience due to the extreme steel type and rolled structure.

Translated with www.DeepL.com/Translator (free version)

Intended use: Tactical / Military / Collectibles

Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co
Blade treatment: PVD
Handle: G-10
Blade length: 175mm.
Blade thickness: 5mm.
Length closed: -
Total length: 290mm.
Thickness when closed: -
Balancing: Set back
Weight: 262g.
Closure: -
Clip: -
Sheath: Kydex and Nylon, with M.O.L.L.E.
Packaging: Cardboard box with FKMD logos
Notes: Single edge version

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory without any type of sharpening, so that this product is sold and released in accordance with current regulations in force in Italy.

Purpose: collecting

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: PVD
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: Rearranged
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Sharpening blade - design by Hill Knives

The dagger is based on the original Fairbairn and Sykes; It is a collector's knife designed by Hill Knives to honor and commemorate the special forces around the world.

WARNING: The blade leaves the factory unsharpened / with dull edge; due to italians current regulations and law restrictions.

Purpose: collection

Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co 58 / 60HRC
Blade Treatment: Satin
Handle: Walnut wood
Blade Length: 170mm.
Blade thickness: 5mm.
Total length: 300mm.
Balancing: -
Weight: 205g.
Sheath: leather
Packing: Cardboard box with FKMD logos
Notes: Design by Hill Knives - blade with dull edge / unsharpened due to italian law restrictions