Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Retired from rivata collection - Rare Rockstead model produced in 2009 in SANMAI ZDP189 and ATS34 steel - the temper of this piece has reached a rare hardness of 67.4 hrc - Knife in like new condition.

Checked and certified by our internal laboratory - Collini Cutlery.

The best industrial knives currently in production are currently marketed under the Rockstead brand, of Ishida Co. of Sakai, Japan.

Created by Katsumi Kitano, who has been producing quality knives for over 20 years so as to have been awarded the highest recognition among artisan cutlers in Japan, they prove to be exceptional both in cutting capacity, penetration and edge retention and in terms of innovation for materials used and for the construction techniques.

Blade: SanMai ZDP189 and ATS-34 stainless steel at 67.4 HRC
Handle: Same (real stingray leather) and aircraft aluminum with black alumite treatment at Hv400
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closure: Liner Lock in 402J2 steel at 52HRC
Clip: 402J2 to 52HRC steel
Notes: Accompanied by a guarantee certificate with technical specifications.

Intended use: Regional

Type of production: Artisan
Lama production: Italy
Blade: 12c26 stainless steel
Blade treatment: -
Handle: ram horn
Blade length: 110mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 270mm.
Thick when closed: 19mm
Balancing: -
Weight: 105g.
Closing: without blade lock
Clip: -
Sheath: -
Packaging: rigid packaging with artisan production certificate signed by Antonio Deroma
Note: -

Collector's knife from private collection - Handcrafted in 2001 by Allen Elishewitz - Overall in good condition, original sharpening, some small signs of wear on the titanium handle and on the back of the blade - Without certificates and packaging - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Collection

Type of production: custom
Country of production: USA
Blade: handcrafted and bevelled, in CPM-154CM stainless steel
Blade treatment: hand satin finish
Handle: full scales in titanium with blue anodizing
Blade length: 82mm.
Blade thickness: 3.5mm.
Length closed: 130mm.
Total length: 184mm.
Thick when closed: 11mm.
Weight: 96g.
Closing: framelock
Clip: removable, stainless steel
Notes: Made entirely by hand by Allen Elishewitz

Knife withdrawn from a private collection - Excellent condition, has small marks and scratches on the titanium sleeve, factory sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / EDC / Collection

Type of production: semi-artisan
Country of production: USA
Blade: in CTS-XHP Black stainless steel
Blade treatment: Black PVD
Handle: Grade 5 titanium
Blade length: 92mm.
Blade thickness: 5mm.
Length closed: 122mm.
Total length: 216mm.
Thick when closed: 13.2mm.
Balancing: -
Weight: 187g.
Opening: titanium thumbstood for right-handers
Washers: Steel ball bearings
Closing: Framelock
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -

Knife withdrawn from a private collection in like new condition - Thanks to the engraving next to the BUCK logo (X series) it is possible to go back to the 1991 year of production of the knife - Complete with box and scabbard - Checked, certified by our internal laboratory. Cutlery Collini

The Kalinga, model first produced by Buck in 1969, was a favorite of Al Buck. With a large skinner blade and an ergonomic design, the Kalinga remains in addition to an important piece to collect, also an excellent choice for hunting use.

Intended use: Sports / Collection

Type of production: Industrial
Blade production: USA
Blade: full tang, 420HC stainless steel
Blade treatment: -
Handle: Wood
Blade length: 115mm.
Blade thickness: 4.5mm.
Length closed: -
Total length: 255mm.
Thick when closed: -
Balancing: -
Weight: 322g.
Closing: -
Clip: -
Sheath: brown leather
Packaging: Cardboard box with Buck logos, with certificates
Note:

Knife taken from a private collection - Like new condition - Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: VG10 stainless steel
Blade treatment: -
Handle: Glass fiber reinforced with Nylon (FRNR)
Blade length: 79mm.
Blade thickness: 2mm.
Length closed 114mm.
Total length: 192mm.
Balancing: -
Weight: 71g.
Closing: Back Lock
Clip: removable, stainless steel
Sheath: -
Packaging:
Note: -

Knife withdrawn from a private collection - Model discontinued by WE KNIFE - Like new condition, with original packaging - Checked, certified by our internal laboratory Collini Cutlery

Intended use: Sports / Collection

Type of production: Industrial
Country of production: China
Blade: CPM-S35VN 59 / 61HRC stainless steel
Blade treatment: dual tone, satin & black PVD
Handle: 6AL4V titanium machined with numerical control
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 114g.
Closing: Framelock
Clip: 6AL4V titanium
Packaging: cardboard box with We Knife Co. logos
Notes: Carson Flipper opening system on ceramic ball bearings

Knife withdrawn from a private collection - Like new condition, never used - Product made and patented around the end of the 90s by the Spanish Nieto. Checked and certified by our internal Collini Cutlery laboratory.

Through a rotation mechanism inside the handle, activated thanks to an unlocking pin, this multi-tool allows you to use a 13 cm blade or a 13 cm tool but complete with 16 uses.

Intended use: Survival / Sportsman

Blade: AN-556 stainless steel
Handle: Metal
Blade length: 120mm.
Blade thickness: 3mm.
Length closed: -mm.
Total length: 295mm.
Balancing: backward, 6cm from the lower guard branch
Weight: 325g.
Closing: -
Clip: -
Sheath: leather with screwdriver insert
Note: -

Collector's knife from a private collection - Daghetta model made by the famous Italian knifemaker Max around the early 2000s - Like new condition - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Lama production: Italy
Blade: Damasteel 61/62 Hrc damascus steel
Blade treatment: -
Handle: damasteel damask bolster, carbon fiber with titanium liners
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm.
Balancing: -
Weight: 129g.
Closing: Liner Lock
Clip: in damasteel damask
Sheath: -
Notes: ONE PIECE - custom knife handcrafted by Max

Massimiliano Salice Sanna, called Max is a master knife maker "of the first hour", active for a quarter of a century. Specialized in the construction of folding knives, he is constantly looking for new materials and innovative techniques. Max is a master of the Italian guild of knife makers, born in 1958, a Roman by birth and a Tuscan by adoption.

Intended use: Collection

Type of production: Artisan by Maestro CIC Sergio Consoli
Lama production: Italy
Blade: full-tang in RWL-34 60 / 61HRC stainless steel
Blade treatment: -
Handle: carbon fiber
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 205mm.
Thick when closed: 19mm.
Balancing: -
Weight: 138g.
Closing: Liner Lock
Clip: carbon fiber
Sheath: -
Packaging:
Notes: Handmade by Maestro Sergio Consoli - knife number 271 made in 2009

Acknowledgments

I currently make a limited number of knives a year and participate in some exhibitions, where among other things I have won my first prizes:

in 2005 at LAME SOTTO I PORTICI in Romano di Lombardia (BG) I was awarded the "best table on display"

always in the same year at the CULTER-EXPO in Novegro (MI) as "best folding knife"

moreover, I ranked second in the competition organized by LAME D'AUTORE magazine as the best fixed hunting blade

then in 2007 at "Scarperia" I won the third prize as the best closable

but above all again in 2007, I achieved, to my great satisfaction, the level of MASTER OF ITALIAN COLTELLINAI CORPORATION, recognition received at the first exam taken.

Presentation of the craftsman

Creating a hand knife is what I consider a real art form.
The satisfaction of seeing an object that comes from your own hands, that takes shape and that reaches mechanical, artistic and aesthetic perfection is what pays me more for all the hours of work and effort it takes to create a knife completely by hand.

The passion for "cutting irons" has always been in me since I was a child and has grown with me until the almost sudden decision to build my first knife on my own, it was a "need", almost an inner need that I couldn't put it off, my hands and my mind had to start creating, of course what I had always been passionate about ... the knife!

I started at 40, in 2003, practically self-taught, I had no manual work experience, but I had been a mechanical designer for many years and this allowed me to know perfectly the technique and all the various stages of mechanical processing.

Currently I am a member, with the rank of Maestro, which is the highest, of the Italian Knifemakers Guild, an association recognized all over the world for the seriousness and above all quality of execution that all its members must maintain over time.

What I do now is what I consider my art form ..., to create "handmade, hunting and collectible knives".

They are knives made entirely by hand, only with an infinite series of files, a small drill for the holes and a sander for the concave grinding of the blades, nothing else!
I make above all folding knives, which satisfy more my desire to build perfect mechanical objects and perfection in the smallest details, even inside where they cannot be seen, is what distinguishes a hand-made knife from an industrially made one .

The mechanics must then be made in the best possible way, without counting the hours of work, only in this way the final result is guaranteed.

Of course, over the years I have refined my technique and currently I have improved even more the mechanics by inserting a system of ball bearings on the blade rotation, which guarantee an absolutely perfect seal and allow the blade to close and open without the slightest friction and with an incredible sweetness.

With regard to the blades, I am experimenting with new types of hardening, which give hardnesses of 62-63 HRC and allow exceptional wire holding and cutting quality for all types of use.

Pathically I make all the knives on my initial design, they are all unique pieces made completely by hand down to the smallest details, one at a time, only in this way, in my opinion, a knife can be considered "handmade".

Regarding the materials that I use, I can say that for the blades I prefer RWL34 steel which is sintered from powders and guarantees the total absence of internal defects, sometimes I also use damask, both stainless steel and carbon, for the uniqueness 'that they donate to the knife, since each damask is always different from another.

For the handles, one of the most beautiful materials is the mammoth tooth, which can be found in a variety of colors, all beautiful, I also use the fossil ivory of mammoth, various briars, titanium and carbon fiber.

Most of the knives, however, are made entirely of steel, in order to then be engraved, always and rigorously by hand, to transform the knife even more into a real work of art ...

Knife withdrawn from a private collection - Rare model produced by Spyderco to commemorate New York police officer John D'allara who died when he entered the World Trade Center on September 11, 2001 - no longer in production since 2005 - Like new condition - With original box - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Sports

Type of production: Industrial
Blade production: Japan
Blade: VG10 Stainless Steel
Handle: FRN with drowned stainless steel folders
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 124mm.
Total length: 203mm.
Weight: 164g.
Closing: Spyderco’s Ball Bearing Lock
Clip: stainless steel
Packaging: with box
Notes: -

Collector's knife from a private collection - Model TTFF1 by Medford with custom Black Blood treatment and black coating of the sleeve by Dino Picco by Wander Tactical - Excellent condition with original box - Regrinded - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Tactical / Collection

Type of production: Custom
Blade production: Usa
Blade: D2 steel
Blade treatment: -
Handle: aluminum and titanium
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 245mm.
Thick when closed: 13mm.
Balancing: on the guard branch
Weight: 252g.
Closure: Frame Lock
Clip: stainless steel
Sheath: -
Packaging: polymer tactical case with Medford logos
Notes: Designed and built by Greg Medford - Black Blood blade treatment and handle repainted by Wander Tactical designer Dino Picco

Knife withdrawn from a private collection - Beautiful and rare knife made in the late 90s by the famous American Knifemaker Frank Centofante, who passed away in 2009 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: Collection / Gentleman

Type of production: Artisan
Blade production: USA
Blade: ATS34 stainless steel
Blade treatment: -
Handle: steel and mother of pearl
Blade length: 75mm
Blade thickness: 2.5mm.
Length closed: 103mm.
Total length: 180mm.
Thick when closed: 10mm.
Balancing: -
Weight: 86g.
Closing: Back Lock
Clip: -
Sheath: -
Packaging: -
Notes: rare artisan knife made by the well-known American cutler Frank Centofante who recently passed away, serial number 008

Knife withdrawn from a private collection - Like new condition: never used, never re-sharpened, never carried in pocket, perfect in every detail. Without original box. - Checked and certified by our Collini Cutlery internal laboratory.

Intended use: Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: satin finish
Handle: carbon fiber
Blade length: 77mm.
Blade thickness: 2.7mm.
Length closed 114mm.
Total length: 181mm.
Thick when closed: 17mm.
Weight: 92g.
Closing: Liner Lock
Clip: removable, multi-position, in stainless steel
Packaging: absent
Notes: knife from private collection, like new, without box

Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 198mm.
Thick when closed: 14mm
Balancing: -
Weight: 103g.
Closure: Liner Lock
Clip: titanium
Sheath: -
Note: -

Knife withdrawn from a private collection - Rare model made by the famous knifemaker Brian Tighe in 2005 - Like new condition. Never re-sharpened - Checked and certified by our internal Collini Cutlery laboratory.

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin
Handle: titanium
Blade length: 953mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm
Balancing: -
Weight: 108g.
Closure: Frame Lock
Clip: titanium
Sheath: -
Note: -

USED KNIFE, TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased and used
* Condition: In good overall condition (see accompanying photos)
* Commercially available 
* Sharpening: Resharpened by our workshop, also clean oxidation which has affected some portions of the edge, which is however back in working order
* Marks on blade: YES
* Marks on handle: YES, various superficial oxidation stains
* Box: Present and original, in cardboard
* Scabbard: in good condition
* Manuals, Certificates and Warranties: -
* Checked and certified by our in-house laboratory

Intended use: Hunting / Outdoor

Production type: Industrial
Blade production: Taiwan
Blade: Stainless steel 440C differentiated hardening 58/45HRC
Blade Treatment: Mirror polished
Handle: Brass, ebony wood and leather rings
Blade length: 280mm.
Blade thickness: 6mm.
Total length: 405mm.
Weight: 800g.
Scabbard: Leather
Packaging: Cardboard box
Notes: Accompanied by a whetstone.

The Outback is a clear homage to the knife used by Paul Hogan in the Mr. Crocodile Dundee films, in fact it faithfully follows its shape and dimensions.

Intended use: Hunting / Utility

Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-154CM stainless steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Total length: 244mm.
Balancing: advanced
Weight: 168g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: Outdoor

Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 10mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced
Weight: 192g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: Outdoor

Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 4mm.
Total length: 270mm.
Balancing: advanced
Weight: 194g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: Outdoor / Tactical

Type of production: Semi-Industrial
Country of production: USA
Blade: A2 steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 160mm.
Blade thickness: 7mm.
Total length: 315mm.
Balancing: advanced
Weight: 480g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -
Send feedback
History
Saved

Custom by Kevin Wilkins from 2005 from a private collection provided with original certificates signed by the craftsman.

Slight regrinding, perfectly centered blade with good retention from closed, fluid opening movement and blade without any horizontal or vertical clearance once opened. The frame lock engages in the first quarter of the race without any uncertainty and without sticking.

Globally in good condition, it shows some small marks on the G11 handles and on the back and belly of the liners. A small abrasion on the blade, on the right side near the tip of the knife.

Intended use: collection

Type of production: artisanal
Country of production: Germany
Blade: CPM-S90V stainless steel
Finish: Satin
Handle: jade Titanium and G11
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 110mm.
Total length: 188mm.
Thick when closed: 15.8mm
Weight: 158g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: with original warranty certificates - produced in March 2005 - from a private collection

Intended use: collection

Type of production: custom
Blade production: U.S.A.
Blade: BG-42 stainless steel
Blade treatment: Satin finish
Handle: titanium and carbon fiber
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 195mm.
Thick when closed: 13mm
Balancing: -
Weight: 94g.
Closure: Liner Lock
Clip: in titanium
Sheath: -
Notes: production early 2000s, withdrawn from a private collection

Intended use: Outdoor / Tactical

Type of production: semi-industrial
Country of production: USA
Blade: full tang in CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 195mm.
Blade thickness: 5mm.
Total length: 327mm.
Balancing: advanced
Weight: 380g.
Sheath: in leather
Packaging: Cardboard box with Bark River logos
Note: -

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated LSS PGK steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel with jimping acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. 

The blade is heat treated and double tempered to a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Enhanced parrot's beak pommel and lower front guard aid in blade retention during chopping. Stainless steel hardware locks all the components into place.

Included is a Spec-Ops Brand fabric sheath with thermoformed puncture-proof kydex lining.

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Specifications:

Knife Name:  Model 451 Chopper

Designer:  Jeff Freeman

Overall Length: 11.8"

Blade Length: 6.5”

Blade Thickness:  3/16”

Blade Steel:  LSS PGK

 Blade Hardness:  59-61 HRC

Blade Style:  Full-Tang Fixed Blade, Drop Point

Coating: CerakoteTM Ceramic Firearms Coating

Handle Material: Machined G-10 or Canvas Micarta

Sheath Material: Spec-Ops Brand Basic Modular Sheath

Knife Weight: 0.66 LBS

Note from Jeff: Before joining the US Army, I worked for 5 seasons as a wildland firefighter based out of Sweet Home, Oregon. While there, I battled scores of wildfires throughout Oregon and the Western United States with a very skilled, hard-working and dedicated group of young men and women. My crew's radio dispatch call sign was "451". 

I've named this knife family the "Model 451" in honor of those crew mates past and present that put it all on the line for the protection of our wildlands.

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.

The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.

The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath. 

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Freeman Outdoor Gear - 4 "Flat Dark Heart Field Knife 451 - G10 Black - Knife

Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Lama: Flat Dark Heart
Handle: Black G10
Blade length: 95mm.
Blade thickness: 4.8mm.
Overall length: 225mm.
Weight: 222g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.

The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.

The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath. 

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

4 "Cobalt Field Knife 451 - G10 Orange - Knife

Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: G10 Orange
Blade length: 95mm.
Blade thickness: 4.8mm.
Overall length: 225mm.
Weight: 222g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.

The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.

The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath. 

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Cobalt Field Knife 451 - Green Micarta - Knife

Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: Green Micarta
Blade length: 85mm.
Blade thickness: 4.8mm.
Overall length: 200mm.
Weight: 172g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.

The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.

The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath. 

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: Tan G10
Blade length: 85mm.
Blade thickness: 4.8mm.
Overall length: 200mm.
Weight: 180g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.

The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.

The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath. 

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: Blue G10
Blade length: 85mm.
Blade thickness: 4.8mm.
Overall length: 200mm.
Weight: 180g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor

Introducing the new Model 451 full-tang fixed blade field knife, designed and made by Freeman Outdoor Gear LLC.

The CerakoteTM coated CPM-S35VN stainless steel drop point blade features a main flat grind with a thick secondary swedge for maximum toughness and piercing ability.

The exposed pommel acts as a flat hammering surface and includes a lanyard attachment hole sized for the included 550 cord lanyard. Additional milled grooves in the blade on the thumb rise provide a secondary gripping surface for extra control during delicate cuts.

The blade is cryogenically treated with a hardness of 59-61 Rc and the cutting edge is ground razor sharp at a 40 degree included angle (20 degrees per side).

The handle scales are CNC machined from tough G-10 or optional Canvas Micarta with milled grooves for a secure and comfortable grip. The handle shape provides an ergonomic and balanced grip for use in multiple positions. Stainless steel hardware locks all the components into place.

The custom Kydex thermo-formed sheath features a secure and tight friction fit with multiple attachment points for horizontal, vertical, PALS and 550 cord lashing/mounting options. Also available with a Spec-Ops Brand Combat Master (mini) fabric sheath. 

This is a premium 100% US-made field knife designed to excel in multiple cutting chores under the most demanding conditions.

Freeman Outdoor Gear - Cobalt Field Knife 451 - G10 Black - Knife

Intended use: Tactical / Utility
Design: Jeff Freeman
Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: Black G10
Blade length: 85mm.
Blade thickness: 4.8mm.
Overall length: 200mm.
Weight: 180g.
Sheath: Kydex with thickness
Packaging: Cardboard box with logos Freeman Outdoor

Use: Neck / Tactical / Utility

Production Type: Semi-Handmade
Production Country: USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Stonewashed
Handle: -
Blade length: 66mm.
Blade thickness: 4.8mm.
Overall length: 155mm.
Weight: 95g.
Sheath: Kydex with thickness of 1.5mm
Packaging: Cardboard box with logos Freeman Outdoor
Notes: -

Use: Neck / Tactical / Utility

Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Blade: Cobalt Black Cerakote
Handle: -
Blade length: 66mm.
Blade thickness: 4.8mm.
Overall length: 155mm.
Weight: 95g.
Sheath: Kydex with thickness of 1.5mm
Packaging: Cardboard box with logos Freeman Outdoor
Notes: -

Use: Neck / Tactical / Utility

Production Type: Semi-Handmade
Production Lama USA
Blade: stainless steel CPM-S35VN 59 / 60HRC
Treatment Lama: Patriot Brown Cerakote
Handle: -
Blade length: 66mm.
Blade thickness: 4.8mm.
Overall length: 155mm.
Weight: 95g.
Sheath: Kydex with thickness of 1.5mm
Packaging: Cardboard box with logos Freeman Outdoor
Notes: -

Purpose : Hunting / Outdoor / Bushcraft
Type of production : Semi-Industrial
Country of production : USA Blade : A2 steel at 58HRC
blade Treatment : -
Handle : Green Canvas Micarta
blade length : 103mm.
blade thickness : 4mm.
Length closed : -
total length : 212mm.
thickness when closed : -
Balancing : -
Weight : 126g.
Closing : -
Clip : -
Sheath : brown leather, style Loveless
Pack : Cardboard box with logos Bark River
Notes : -