Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Overall in good
* Commercially available: Discontinued in 2017.
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small signs of wear and tear.
* Marks on handle: None
* Box: Present and original
* Scabbard: Present and original, modified for belt carry.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Sporting / Neckwear

Production Type: Industrial
Country of Production: Japan
Blade: full tang, Stainless steel VG-10
Blade finish: satin finish
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 181mm.
Weight: 148g.
Sheath: Neck, boltaron, with possibility of Tek-Lok or MOLLE type attachments
Packaging: Cardboard box with Spyderco logos.
Notes: Design by Fred Perrin - Discontinued item, previously purchased, from private collection - Supplied with two removable attachments for belt carry

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CTS BD-1
Blade treatment: Black DLC
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 model with G10 handle

Il Red Spacer KA-BAR è probabilmente il coltello KA-BAR più collezionabile realizzato durante la seconda guerra mondiale. Il distintivo distanziatore rosso presente sotto la guardia ha attirato l'attenzione dei collezionisti per decenni. Sebbene gli originali siano rari e costosi, il laboratorio State & Union di KA-BAR - che si occupa delle realizzazioni custom - ha realizzato un piccolo lotto di questo iconico coltello.

Le rondelle in pelle sono modellate a mano per creare un aspetto invecchiato. Il fondello e la guardia sono lavorate artigianalmente per replicare le forme e le dimensioni dell'originale.

Ogni distanziatore rosso è fatto a mano per essere leggermente più lungo dell'attuale distanziatore utilizzato sui coltelli da combattimento/utilità KA-BAR. La lama viene sabbiata, quindi trattata a freddo.

Il fodero subisce un processo di invecchiamento per scurire la pelle e far corrispondere il colore del fodero originale.

Destinazione d'uso: Tattico/Militare

Lama: in acciaio al carbonio 1095 56/58HRC
Manicatura: anelli di cuoio
Lunghezza lama: 180mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -mm.
Lunghezza totale: 290mm.
Bilanciatura: arretrata - 1 cm. dal ramo di guardia inferiore
Peso: 305g.
Chiusura: -
Clip: -
Fodero: in cuoio
Note: -

La Coltelleria Collini di Busto Arsizio è distributore ufficiale per l'Italia del marchio KA-BAR

Knife collected from private collection - Absolutely like new, old production CPM-S30V steel - Never used - Original sharpening - Original box, slightly marked, with certificates - Knife checked and certified by our internal laboratory

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: like new knife, taken from a private collection

Intended Use: Light Utility

Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 286mm.
Weight: 280g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -

Intended Use: Light Utility

Production type: industrial
Country of Production: China
Blade: full tang, stainless steel 8Cr13MoV
Blade finish: Powder coated
Handle: G10
Blade length: 122mm.
Blade thickness: 4mm.
Total length: 254mm.
Weight: 275g.
Sheath: ABS with belt clip system, M.O.L.L.E. compatible.
Notes: -

Intended Use: Tactical / EDC

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S30V
Blade Treatment: Satin finish
Handle: G10 with embedded stainless steel liners
Blade length: 101mm.
Blade thickness: 3.7mm.
Length closed: 136mm.
Total length: 236mm.
Thickness when closed: 11mm.
Weight: 150g.
Closure: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Package: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports

Type of production: Industrial
Country of production: USA
Blade: CTS BD-1 stainless steel
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed length: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, in stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 C223GP model

Kelly McCann is one of the world's foremost experts on counter-terrorism, counter-terrorism, close combat and all aspects of security. His decades of real-world operational experience are clearly reflected in the Canis, a no-frills folding knife optimized for personal protection.

Its extraordinary CPM® S30V® stainless steel blade combines a Wharncliffe style design with a reinforced tip and a central blade wedge to reduce weight and maximize cutting power.
The ergonomic handle features carbon fiber and G-10 scales with layered weft, drowned stainless steel liners, high-strength compression closure and a versatile four-position clip that supports all possible transport options.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Carbon Fiber and G10 with liners embedded in stainless steel
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 120mm.
Total length: 206mm.
Thick when closed: 11mm.
Weight: 116g.
Closing: Front Lock
Clip: multi-position, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Kelly McCann

Similar to the most famous and best-selling model 1217 USMC, the model 1219 differs in the use of the U.S. LOGO. ARMY engraved on the blade and on the sheath and with the partially serrated blade.

The USMC KA-BAR is considered one of the most famous knives in the world. It was originally designed for United States troops in the Second World War and its effectiveness has since been universally recognized and used in many other military scenarios.

Intended use: Tactical / Military

Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: backward - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: leather
Note: -

Intended use: Outdoor

Type of production: Semi-Industrial
Country of production: USA
Blade: CPM-3V steel
Blade treatment: satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 4mm.
Total length: 270mm.
Balancing: advanced
Weight: 194g.
Sheath: In leather
Packaging: Cardboard box with Bark River logos
Note: -

Intended use: sports

Blade: 4116 stainless steel 57 hrc
Handle: leather rings
Blade length: 175mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 295 mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 200g.
Closing: -
Clip: -
Sheath: in leather
Note: -

From KA-BAR regarding the special engraved logo: The engraved logo features the historical "The Union" logo from the early 1900s, a bear, and the years marking 120 years - 1898 and 2018.
The significance of the bear is in the KA-BAR name itself. An Alaskan hunter was attacked by a Kodiak bear, but successfully defended himself using his Union Cutlery knife. The hunter was so thankful that he sent a letter describing the ordeal with "K a Bar" (Kill a Bear) as well as sending in the bear fur. The officers of Union Cutlery decided to adopt KA-BAR as a trademark in 1924.

Intended use: Tactical / Military
Production: U.S.A.
Blade: 1095 56 / 58HRC carbon steel
Handle: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Length closed: -mm.
Total length: 305mm.
Balancing: set back - 1 cm. from the lower guard branch
Weight: 305g.
Closing: -
Clip: -
Sheath: in leather
Note: -

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S110V Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: sprint run edition

Target: Tactical / Military

Blade: carbon steel 1095 56 / 58HRC
Country of Origin: USA
Finishing: Teflonatura
Manicure: FRN (fiberglass reinforced nylon)
Blade length: 174mm.
Blade thickness: 4mm.
Total length: 328mm.
Balance: backward - 1 cm. from the lower guard branch
Weight: 300g.
Sheath: in Celcon (ABS)

Intended use: Tactical / Utility

Type of production: Industrial
Country of Origin: USA
Blade: carbon steel 1095 56 / 58HRC
Blade Treatment: Black Coating
Handle: Ultramid
Blade Length: 89mm.
Blade thickness: 4.2mm.
Overall length: 192mm.
Balance: backward, 2 cm from the lower guard branch
Weight: 181g.
Sheath: in Nylon, compatible with M.O.L.L.E.
Packing: Cardboard box with Ka-Bar logos
Notes: Design by Jesse Jarosz

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN Powder Steel
Blade treatment: Satin
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Tactical / Utility

Blade: 1095 carbon steel 56 / 58HRC
Country of Origin: USA
Finish: Teflon coating
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Sheath: Leather

Intended Use: Training

Type of production: Industrial
Production Country: Japan
Blade: Stainless steel AUS-6
Blade treatment: Satin finish
Handle: FRN
Blade length: 109mm.
Blade thickness: 4mm.
Overall length: 241mm.
Weight: 146g.
Sheath: Boltaron (plastic) with Tek-Lok coupling
Packaging: cardboard box with Spyderco logos
Notes: Design by Sal Glesser - Exemplary discontinued and no longer available, one piece at our disposal

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 79mm.
Blade thickness: 4mm.
Closed Length: 114mm.
Overall length: 192mm.
Thick when closed: 11mm.
Weight: 113g.
Closure: Front Lock
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended use: Sports / Collection

Type of production: Industrial
Production Lama: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: Titanium and Carbon Fiber with marble effect
Blade length: 94mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 218mm.
Thick when closed: 12mm.
Weight: 145g.
Closing: Framelock
Clips: stainless steel, removable
Packaging: cardboard box with Spyderco logos
Notes: Design by Filip De Leeuw

Ka-Bar - USMC Vietnam Military Knife K-9140 - Knife

Intended Use: collection

Blade: 1095 carbon steel 56 / 58HRC
Handle: Leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
closed length: -mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closed: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Intended use: Sport / Collection

Type of production: Industrial
Production blade: Use
Blade: Stainless steel CPM-S30V Steel Powder
Blade treatment: Black TiNi
Handle: G10
Blade length: 81mm.
Blade thickness: 4mm.
Length closed: 121mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 108g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: discontinued product and hard to find, very rare that you can find the version with black blade plain edge

Use: Neck Knife

Blade: 1095 carbon steel 56/58 HRC
Handle: Paracord
Blade length: 83mm.
Blade Thickness: 4mm.
Length closed: -
Overall length: 177mm.
Balancing: -
Weight: 68g.
Sheath: ABS
Notes: 2m including paracord - Developed in cooperation with Ka-Bar Becker Knives & Tools and ESEE Knives

Ka-Bar - USMC Never Forget - September 11, 2001 - 02-9128 - knife

Intended use: collection

Blade: carbon steel 1095 56/58HRC
Handle material: leather rings
Blade length: 180mm.
Blade Thickness: 4mm.
Length closed:-mm.
Overall length: 305mm.
Balancing: backward - 1 cm. the branch of the lower guard
Weight: 305g.
Closure: -
Clip: -
Sheath: Leather
Notes: Limited Edition

Blade: CPM-S30V Stainless Steel
Handle: Carbon Fiber and G10 Laminate
Blade Length: 117mm.
Blade Thickness: 4mm.
Overall Length: 260mm.
Weight: 196g.
Lock: Compression Lock
Clip: Stainless Steel
Sheath: -
Notes: Design by Laci Szabo

Destinazione d'uso: Sportivo/Utility

Tipo di produzione: industriale
Lama: Full Tang, in acciaio inox VG-10
Produzione Lama: Japan
Manicatura: FRN (Fiberglass Reinforced Nylon)
Lunghezza lama: 70 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 171 mm.
Bilanciatura: -
Peso: 108g.
Fodero: in Zytel, con clip/passante multiposizione in Kydex

Purpose : Hunting / Outdoor / Bushcraft
Type of production : Semi-Industrial
Country of production : USA Blade : A2 steel at 58HRC
blade Treatment : -
Handle : Green Canvas Micarta
blade length : 103mm.
blade thickness : 4mm.
Length closed : -
total length : 212mm.
thickness when closed : -
Balancing : -
Weight : 126g.
Closing : -
Clip : -
Sheath : brown leather, style Loveless
Pack : Cardboard box with logos Bark River
Notes : -

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CTS-204P stainless steel
Blade treatment: Stone Washed
Handle: G-10 and Titanium
Blade length: 88mm.
Blade thickness: 4mm.
Length closed: 114mm.
Total length: 202mm.
Thick when closed: 13.4mm.
Weight: 116g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Removable, in stainless steel
Packaging: Cardboard box with Spyderco logos
Notes and curiosities: Design by Brad Southard - Ball Bearing Pivot System - First Spyderco with Carson Flipper type rapid opening - 2013 model now out of production and nowhere to be found

Spyderco - Starmate by Bob Terzuola - C55G - knife

Intended Use: Sports / Outdoors

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: G-10 Black
Blade length: 95mm.
Blade thickness: 4mm.
Closed Length: 126mm.
Total length: 221mm.
Thick when closed: -
Balance: -
Weight: 139g.
Lock: Liner Lock
Clip: Multiposition and removable, stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: Design by Bob Terzuola

Intended use: Tactical

Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel
Blade treatment: powder coating
Handle: Kraton
Blade length: 203mm.
Blade thickness: 4mm.
Total length: 325mm.
Weight: 332g.
Sheath: Kydex
Packaging: Cardboard box with Ka-Bar logos
Note: -