Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Muela - Bushcraft Machete Knife - knife
Machete
Intended use: sports
Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 170mm.
Blade thickness: 5mm.
Length closed: -
Total length: 35mm.
Balancing: -
Weight: 638g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "MU-MACHETE€106.56Out of stock -
Muela - Duetto 22 - Bowie and Folder Knives - knife
Duetto knife - Bowie with folding knife
Bowie
Intended use: sports
Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 210mm.
Blade thickness: 5.5mm.
Length closed: -
Total length: 342mm.
Balancing: -
Weight: 426g.
Closing: -
Clip: -
Sheath: Leather
Note: late 90s production "Folder
Intended use: sports
Type of production: industrial
Blade: full tang in 440 stainless steel
Blade treatment: -
Lama production: Spain
Handle: wood
Blade length: 98mm.
Blade thickness: 3mm.
Length closed: -
Total length: 222mm.
Balancing: -
Weight: 184g.
Closing: -
Clip: -
Note: late 90s production "MU-22€118.85Out of stock -
Berkel - folder knife in San Mai VG10 67 layers - gentleman knife 11 cm - kitchen knives
The artisans of Berkel have created an exclusive series of switchblade knives. The search for steel for the blade and fine materials for the handle, make these knives real collectibles. These unique pieces are numbered one by one by Berkel's cut masters.
- Blade material: Damaged steel San Mai 67 VG10 (60/61 HRC)
- Blade length: 11 cm long blade
- Total length: 25.5 cm
- Weight: 78 gr
- Sharpening: Smooth
- Handle: Composed of two wooden grips. Decorated with glossy black logo.
- Notes: no box, with vinyl case.B-F-SM -
DPX Gear - H.E.F.T. 4" Assault Fixed Blade - knife
H.E.F.T. Hostile Environment Field Tool
Knife, a collaboration between the American DPX Gear and the Italian company Lion SteelIntended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: satin black PVD TiCN coating
Handle: Black G10
Blade length: 100mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: Central
Weight: 200g.
Designed: by Thomas Rumici & Robert Young Pelton
Sheath: Cordura
Packaging: carton box with logos DPX GEAR2846S -
DPX Gear - H.E.F.T. 4" Woodsman Fixed Blade - coltello
H.E.F.T. Hostile Environment Field Tool
Coltello nato dalla collaborazione tra l'americana DPX Gear e l'azienda italiana Lion Steel
Destinazione d'uso: Sportivo / Tattico / Caccia
Tipo di produzione: Semi-Industriale
Produzione Lama: Italia
Lama: Sleipner Steel 60HRC
Trattamento Lama: stone washed
Manicatura: Santos, legno brasiliano
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza totale: 230mm.
Bilanciatura: centrale
Peso: 170g.
Designed: by Robert Young Pelton
Fodero: cuoio
Confezione: scatola in cartone con loghi DPX GEAR2845S -
DPX Gear - H.E.F.T. 6 "Assault Fixed Blade - Knife
DPX Gear - H.E.F.T. 6 "Assault Fixed Blade - Knife
H.E.F.T. Hostile Environment Field Tool
Knife, a collaboration between the American DPX Gear and the Italian company Lion SteelIntended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: satin black PVD TiCN coating
Handle: Black G10
Blade length: 146mm.
Blade thickness: 5mm.
Total length: 285mm.
Balance: Central
Weight: 290g.
Designed: by Thomas Rumici & Robert Young Pelton
Sheath: Cordura
Packaging: cardboard box with logos DPX GEAR2846 -
DPX Gear - H.E.F.T. 6 "Woodsman Fixed Blade - Knife
DPX Gear - H.E.F.T. 6 "Woodsman Fixed Blade - Knife
H.E.F.T. Hostile Environment Field Tool
Knife, a collaboration between the American DPX Gear and the Italian company Lion SteelIntended Use: Sport / Tactical / Hunting
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: stonewashed
Handle: Santos, Brazilian wood
Blade length: 146mm.
Blade thickness: 5mm.
Total length: 285mm.
Balance: Central
Weight: 255g.
Designed: by Robert Young Pelton
Sheath: Leather
Packaging: cardboard box with logos DPX GEAR2845 -
DPX Gear - H.E.S.T. Folder D2 - knife
DPX Gear - H.E.S.T. Folder D2 - knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: D2 60/61HRC
Treatment Blade: Milspec Black Coated
Handle: Titanium and G10
Blade length: 75mm.
Blade thickness: 5mm.
Total length: 195mm.
Thick when closed: 14mm.
Balance: -
Weight: 138g.
Closure: Frame Lock with security system Rotoblock
Clip: removable and reversible, stainless steel
Sheath: -
Packaging: wooden box with logos DPX GEAR
Notes: supplied key purpose for removal and adjustmentDPHSF005 -
DPX Gear - H.E.S.T. II Fixed Blade - Knife
DPX Gear - H.E.S.T. II Fixed Blade - Knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: Milspec Black PVD Coated
Handle material: G10
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 193mm.
Thick when closed: 14mm.
Balance: -
Weight: 136g.
Sheath: Cordura
Packaging: cardboard box with logos DPX GEAR2841 -
DPX Gear - H.E.S.T. II Woodsman Fixed Blade - Knife
DPX Gear - H.E.S.T. II Woodsman Fixed Blade - Knife
Knife, a collaboration between the American DPX Gear and the Italian company Lion Steel
Intended Use: Sport / Tactical / Hunting
Type of production: Semi-Industrial
Production Blade: Italy
Blade: Sleipner Steel 60HRC
Treatment Blade: stonewashed
Handle: Santos, Brazilian wood
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 193mm.
Thick when closed: 14mm.
Balance: Central
Weight: 136g.
Designed: by Robert Young Pelton
Sheath: Leather
Packaging: cardboard box with logos DPX GEAR2843 -
DPX Gear - H.E.S.T. Original Fixed Blade - Knife
DPX Gear - H.E.S.T. Original Fixed Blade - Knife
Intended Use: Sport / Tactical
Type of production: Semi-Industrial
Production Lama USA
Blade: High Carbon Steel 1095 57-58HRC
Treatment Blade: Black powder coating
Handle: Green Canvas Micarta
Blade length: 80mm.
Blade thickness: 5mm.
Total length: 193mm.
Thick when closed: 14mm.
Balance: Central
Weight: 139g.
Designed: by Robert Young Pelton
Sheath: Cordura
Packaging: cardboard box with logos DPX GEAR2842 -
Muela - Colibri Hunting Knife - Pakkawood - COL-9R - knife
Intended Use: Hunting / Sporting
Type of production: Industrial
Country of Production: Spain
Blade: Stainless steel 1.4116
Blade treatment: Satin finish
Handle: Brass and Pakkawood
Blade length: 72mm.
Blade thickness: 3mm.
Total length: 155mm.
Weight: 84g.
Sheath: leather
Packaging: -
Notes: 1990s vintage knifeCOL-9R€73.77Only 0 leftOut of stock