Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Maserin - Combat Ready Black G-10-666/T - knife

Intended Use: sports / tactical

Type of production: industrial
Blade: Stainless steel N690Co
Treatment Blade: Teflon
Production Blade: Italy
Handle: G-10
Blade length: 90mm.
Blade Thickness: 5mm.
Length closed: 135mm.
Total length: 225mm.
Balance: -
Weight: 156g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes:-breaker in stainless steel

To commemorate in our own way the 50th anniversary of the death of our great-grandfather Giuseppe Maserin known as "Belu" (1885 - 1972), an Alpine soldier of the 4th Battalion Cadore Regiment and Cav. of Vittorio Veneto, we wanted to make a dagger in the manner of the "Arditi", that is, inspired by those handcrafted daggers that were made from the former bayonets of the Carcano 91 rifles. Specifically, we were inspired by the shape of the bayonet that was made at the CO.RI.CA.MA factory in Maniago.

We called it BeluM joining the M of our surname to 'Belu', thus obtaining a reference to the Latin word 'bellum'. It is a project of clear historical inspiration, but realised with modern machinery, technology and materials. The stenciled wooden box deliberately recalls the features of the crates in which war material was once stored.

BeluM is dedicated to our great-grandfather Giuseppe and all the heroes who sacrificed their lives for their country in any way.

Intended Use: Commemorative / Historical / Military 

Type of production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel 
Blade treatment: Satin finish
Handle: Paosantos wood; AIS 420 stainless steel guard; AISI 316 stainless steel pommel forged from solid
Blade length: 202mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 340g.
Sheath: leather
Packaging: wooden box with stencil logos
Notes: Design by Bonus Design

Destination of use: tactical / hunting / collection

Type of Production: industrial
Blade: 420 stainless steel
Lama Italy production
Handle: in wood
Blade length: 180mm.
Blade thickness: 5mm.
Total length: 310mm.
Balancing: backward, to 1cm. from the guard branch
Weight: 318g. (520g with scabbard)
Closure: -
Clip: -
Sheath: in leather
Packaging: cardboard box
Notes: Engraving on the blade "4eme REGIMENT ETRANGER" Engraving on the knob of the handle: "Foreign Legion 4 Regiment Logo"

Chris Reeve - Mk IV 28 Year Commemorative knife

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.

Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.

Destinazione d'uso: Collezione/Caccia/Sportivo

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 440
Produzione Lama Italy
Manicatura: in legno di palissandro
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio con attacchi molle
Confezione: scatola di cartone 
Note: Incisione sulla lama "2° REGIMENT ETRANGER PARACHUTISTES". Incisione sul pomello dell'impugnatura: "Logo Para' Commando"

Intended use:Survival/utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: Green G10
Blade length: 150mm.
Blade thickness: 5mm.
Overall length: 226mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 218g. (418g. Sheath)
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with logos Maserin
Notes: designed by Nicolai Lilin

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 440
Produzione Lama Italy
Manicatura: in legno di palissandro
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio con attacchi molle
Confezione: scatola di cartone 
Note: Incisione sulla lama "3 Regiment Etranger d'Infanterie" Incisione sul pomello dell'impugnatura: "Logo Legione Straniera 3 R.E.I"

Maserin - Revolt by Moris Baroni - 699 - knife

Intended Use: Tactical
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Ti-Ni Titanium Nitride
Handle material: G10 with steel liners
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 135mm.
Total length: 240mm.
Thick when closed: -
Balance: -
Weight: 250g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Maserin
Notes: Design by Moris Baroni - Skull crasher stainless steel

Destinazione d'uso: caccia/collezione

Tipo di Produzione: industriale
Lama: in acciaio inox 420
Produzione Lama Italy
Manicatura: in legno
Lunghezza lama: 180mm.
Spessore della lama: 5mm.
Lunghezza totale: 310mm.
Bilanciatura: arretrata, ad 1cm. dal ramo di guardia
Peso: 330g.
Chiusura: -
Clip: -
Fodero: in cuoio
Confezione: scatola di cartone 
Note: Incisione sulla lama "6 R.E.G. Legio Patria Nostra" Incisione sul pomello dell'impugnatura: "Logo Legione Straniera 6 Reggimento - 6e rgiment tranger de gnie"

Maserin - Combat Ready G-10-666 - knife

Intended Use: sports / tactical

Type of production: industrial
Blade: Stainless steel N690Co
Treatment Lama: -
Production Blade: Italy
Handle: G-10
Blade length: 90mm.
Blade Thickness: 5mm.
Length closed: 135mm.
Total length: 225mm.
Balance: -
Weight: 156g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Notes: glass-breaker in stainless steel