Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Puma - Cougar '80s Vintage NOS Full Set - 154CM & Jacaranda Wood - 12 6500 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Full set, NOS (new old stock / stock fund).
* Condition: Brand new, never taken out of wooden box.
* Commercially available: Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIconic knife produced by Puma and dating back to the late 1980s, featuring a then very modern line and a steel that was very advanced for the time (154CM).
Intended Use: Collection / Vintage / Tactical
Type of production: Semi-industrial
Country of Production: Germany
Blade: Stainless steel 154CM
Blade finish: Satin finish
Handle: integral, stainless steel and Brazilian Jacaranda wood
Blade length: 165mm.
Blade thickness: 5.5mm.
Total length: 290mm.
Balance: backward
Weight: 320g.
Sheath: leather
Packaging: wooden case
Notes: 1980s Vintage knife - NOS (new old stock) - Brand newPU-COUJHW-CP€901.64Only 1 left -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Museum Replicass Windlass - Primitive Bowie Knife - 400884 - knife
Intended use: sports / collection / hunting
Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box400884 -
BladeTech - Riptide Karambit - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: Taiwan
Blade: 440C stainless steel
Treatment Blade: Teflon
Handle: Zytel
Blade length: 60mm.
Blade thickness: 3mm.
Closed Length: 135mm.
Overall length: 185mm.
Thick when closed: -
Balancing: -
Weight: 120g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Blade Tech
Note: Opening system Wave, with patent Emerson12063 -
Bradburn Custom Cutlery Pointy Kwaiken - custom knife
Knife made entirely by hand by the artisan American Bradburn
Blade: 1084 steel with a high carbon content and selective hardening clay 40/60HRC and high degree of polish .
Bo -Hi : none
Total length: 21.5cm .
Blade length : 9.5cm .
Blade thickness : 5mm .
Handle Length : 9.5cm .
Much Weight : 150g .
Sheath: kydex thermo format
Tsuka -ito : black cotton on same ( ray skin )
Menuki , Seppa , shitodome : bronzeNotes: one piece - certificate of authenticity signed craftsman
Small technical glossary : Hamon : tempering line on the blade * Hi : deep groove in the blade , also called colasangue * Saya : scabbard * Tsuka - Ito or Tsuka -gawa : weaving in cotton, silk or leather that wraps the handle * Tsuba : * guard Fuchi : ornament between guard and manicatura * Kashira : ornament at the end of the handle * Menuki : medallions placed under the cordage of the handle * Habaki : collar that wraps around the beginning of the blade * Seppa : * Shitodome guard seals : seals to which is linked the Sageo * Sori : curvature of the blade67203€307.38Out of stock -
Museum Replicas Windlass - Italian Bastard Sword 500890 - PRIVATE COLLECTION - Artisan Sword
sword withdrawn from a private collection - In excellent condition, only the blade has a scratch following the removal of an engraving (visible in the attached photos)
Checked and certified by our internal Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased and Used
* Condition: Excellent condition
* Marks on blade: YES
* Marks on handle: NO
* Box: Present
* Scabbard: Scabbard
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryThis splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so you can use a second hand as support while still being able to use the sword with one hand thanks to its weight and small dimensions.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total Length: 105cm.
Blade Width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -AP8687