Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - ATCF Original Gangster by Terzuola - MagnaCut & Micarta Black - FX-ATC-OG1 LMB - knife
I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States.
The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip.
The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"
Bob Terzuola
Intended Use: Tactical/SportingType of production: Industrial
Country of Production:Italy
Blade:made of CPM-MagnaCut 59/61HRC steel
Blade finish: satin finish
Handle: black micarta with anodized titanium hardware
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 130g.
Closure: Liner lock
Clip: removable, anodized titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob TerzuolaFX-ATC-OG1LMB -
Fox - ATCF Original Gangster by Terzuola - MagnaCut & Acid Titanium - FX-ATC-OG1 - knife
I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States.
The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip.
The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"
Bob Terzuola
Intended Use: Tactical/SportingType of production: Industrial
Country of Production:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: tianio acid stone washed
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 120g.
Closure: Liner lock
Clip: removable, titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob TerzuolaFX-ATC-OG1 -
Fox - Anzu by Les George - PVD MagnaCut & Bronze Aluminum - FX-560 ALBR - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip; the MAGNACUT drop point blade maximizes the cutting capacity and corrosion resistance of the steel. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black PVD
Handle: anodized aluminum with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 123g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560ALBR -
Fox - Anzu by Les George - PVD MagnaCut & Carbon Fiber - FX-560 CFOR - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560CFOR -
Boker - Sherman EDC knife 110665 - collection knife
The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.
For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.
The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.
A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.
Intended use: Collection
Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray boxBO-110665 -
Fox - Anzu by Les George - PVD Stonewashed MagnaCut & G10 - FX-560 G10B - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip, MAGNACUT drop point blade maximizes cutting capacity and steel corrosion resistance. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: Tactical/SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black Stonewashed PVD
Handle: G10 with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm.
Weight: 113g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560G10B -
Fox - Anzu by Les George - MagnaCut & Blue Aluminum - FX-560 ALOR - knife
ANZU is the new knife from Fox Knives inspired by the creature of the Mesopotamian religions; a powerful figure who challenged the authority of the gods by stealing from the god Enlil the Table of Destinies, an object that, when possessed, confers the power to control the Universe. Through this act of rebellion, Anzu became an example of power, strength, precision and determination, characteristics that also distinguish the new Fox Knives knife designed by Les George.
Intended Use: SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: anodized aluminum with internal stainless steel folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 120g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560ALOR -
Boker - Vigtig Vs. Wild - 121509 - CPM-MagnaCut & Micarta - bushcraft knife
The steel chosen for the blade is Magnacut, which offers high toughness and tolerance to impact loads, despite its high chromium content of 10.7% and impressive hardness of over 62-63 HRC.
The handles are slightly flatter than the original Vigtig, and instead of the hollow studs, the two large screws can be easily removed with the help of a coin, revealing a large compartment with a depth of 14 mm compared to the outer dimensions of the handle, where tweezers, tinder, charcoal tablets, a fishing kit and safety pins, for example, can be easily housed. Even as a skeleton knife without handles, the Boker Vigtig vs. Wild, manufactured entirely in Solingen, makes a fine impression and underscores the versatility of this special model. It comes complete with a compact black Kydex sheath with clip.
Intended use: outdoor / Utility
Production type: Industrial
Country of manufacture: Germany
Blade: full tang in MagnaCut 62/63HRC steel
Blade finish: stonewashed
Handle: Micarta
Blade length: 85mm.
Blade thickness: 4mm.
Total length: 195mm.
Weight: 150g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: design by Dave WengerBO-121509