Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - ATCF Original Gangster by Terzuola - MagnaCut & Micarta Black - FX-ATC-OG1 LMB - knife
I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States.
The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip.
The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"
Bob Terzuola
Intended Use: Tactical/SportingType of production: Industrial
Country of Production:Italy
Blade:made of CPM-MagnaCut 59/61HRC steel
Blade finish: satin finish
Handle: black micarta with anodized titanium hardware
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 130g.
Closure: Liner lock
Clip: removable, anodized titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob TerzuolaFX-ATC-OG1LMB -
Fox - ATCF Original Gangster by Terzuola - MagnaCut & Acid Titanium - FX-ATC-OG1 - knife
I designed the ATCF in 1986-87 inspired by my experience with military and security personnel in Central America and the United States.
The ATCF was the first tactical knife to be fully assembled with screws instead of pins and rivets.
I invented the thumb disk to facilitate opening with both hands. This became a widely copied feature of the ATCF and is used on many other knives by manufacturers around the world.The ATCF was the first pocket knife to use a checkering on the top which, along with the guard, provides protection and a firm grip.
The ATCF is one of the most copied knife shapes in the knife world, and as I often like to proudly say, "The ATCF is the shape...that shaped the whole industry!"
Bob Terzuola
Intended Use: Tactical/SportingType of production: Industrial
Country of Production:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: stone washed
Handle: tianio acid stone washed
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 126m.
Total length: 220mm.
Thickness when closed: 12mm
Weight: 120g.
Closure: Liner lock
Clip: removable, titanium
Packaging: Cardboard box with Fox Knives logos, nylon pouch with "Terzuola" velcro patch
Notes: Design by Bob TerzuolaFX-ATC-OG1 -
Fox - N.E.R.O. Nighthawk CobalTitanium - FX117CT - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: still in production.
* Sharpening: Professionally re-sharpened.
* Marks on blade: None
* Marks on handle: a few small marks on clip, hardware, and aluminum spacer
* Box: Absent
* Scabbard: /
* Manuals, Certificates and Warranties: Absent
* Checked and Certified by our in-house laboratory
Intended Use: TacticalProduction type: Industrial
Country of Production: Italy
Blade: N690Co 58HRC steel with Grade 5 titanium back (49-50HRC)
Blade finish: stonewashed
Handle: G10
Blade length: 91mm.
Blade thickness: 5mm.
Length closed 127mm.
Total length: 216mm.
Thickness when closed: 25mm.
Balance: Backward, 3cm from the top of the guard.
Weight: 186g.
Latch: Liner Lock, with manual insertion safety
Clip: Stainless steel, reversible
Notes: previously purchased knife, withdrawn from private collectionFX-117CT-CP -
Peltonen Knives - M23 Ranger Cub Orange - FJP308 - puukko knife
The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.
The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.
Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.
Intended Use: Hiking / Hunting / BushcraftProduction type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP308 -
Peltonen Knives - M07 Ranger Puukko - Black Uncoated - FJP146 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Dual Tone, partially treated with Cerakote
Handle: TPV (vulcanized thermoplastic)
Blade length: 119mm.
Blade thickness: 4.25mm.
Total length: 243mm.
Weight: 180g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP146 -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
Boker Plus - Kirke by A. De Santis - Nitro-V & G10 - 01BO636 - knife
Delightfully tactical - Alessandra De Santis/Hydra Design enchants knife enthusiasts around the world with the irresistible charm of the Boker Plus Kirke, inspired by the goddess of sorcery of the same name from Greek mythology. Despite its bewitching magic, the Italian knife designer stays true to its tactical line and keeps the pocket knife in a muted black color.
The ball-bearing-opening blade, made of Nitro-V steel with an austere black stonewash finish can be operated either in flipper or with the generous thumb opening, while the push-button lock ensures intuitive knife release.
Pronounced finger recesses, fine texture on the G10 handle grips and a thumb recess on the back of the blade ensure a secure grip at all times and a high level of safety at work, even in the most adverse conditions.
Intended Use: Sporting/TacticalType of production: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade treatment: stonwashed
Handle: G10
Blade length: 86mm.
Blade thickness: 3.8mm.
Total length: 201m.
Weight: 100g.
Clip: removable and reversible, stainless steel
Closure: Button Lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO636 -
Boker Plus / Donges - Expert Fire Folder - Rescue Knife - 01DG007 - knife
Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker.
The Expert Fire Folder has two rescue blades that open in opposite directions. While the spear point blade is suitable for universal cutting tasks, the rescue blade has several multifunctional cutting surfaces. It has a serrated edge for ropes and a lever point with integrated nail extractor. A belt cutter is located directly behind the tip. Finally, the multifunctional blade has a bottle opener for a well-deserved break after use.
Intended Use: Emergency/RescueProduction type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Stonewashed
Handle: stainless steel and G10 folders
Blade length: 100mm.
Blade thickness: 3.2mm.
Total length: 235mm.
Weight: 315g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch
Notes: tungsten carbide rear glass breaker - Second emergency lever lock blade with crowbar, belt cutter and bottle opener - Carson Flipper type opening systemBO-01DG007 -
Boker Plus / Donges - Professional Fire Folder - Rescue Knife - 01DG004 - Knife
Knives made in collaboration with Dönges are specialized tools for difficult and demanding rescue operations. What the products have in common are the red G10 handles with non-slip Dönges honeycomb structure, the incredibly tough and high-performance D2 steel blades and the presence of a glass breaker. Both knives feature multiple cutting edges uncompromisingly designed to cut through ropes, harnesses and clothing of injured people.
This model, designed specifically for firefighters, features a universal spear point blade that can be opened with either the flipper or thumb pin system; there is also the multi-position clip in addition to the belt cutter that can be retracted inside the handle.
Intended Use: Emergency/Rescue
Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Teflon coated
Handle: stainless steel and G10 folders
Blade length: 116mm.
Blade thickness: 3.2mm.
Total length: 271mm.
Weight: 254g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Donger logos, zippered nylon pouch
Notes: Rear tungsten carbide glass breaker - Rear removable belt cutter - Carson Flipper type opening system on ball bearingsBO-01DG004 -
Boker Plus - Fat Box Pen by Midgards Messer - 09BO140 - Bolt Action Tactical Pen
Extravagant, powerful, shrouded in legend: Dirk Hofmeister of Midgards Messer is known for his characterful designs with distinctive material dimensions. And for good reason: the finest materials, indestructible construction, and mythical design are essential to maintaining the favor of the Norse gods.
The Boker Plus Fat Box Pen joins this select group of tactical pens and, by the grace of the gods, is also intended for the denizens of earth. A precision-milled body of black 6061 aluminum forms the high-strength core of the ballpoint pen. Deep grooves ensure an exceptional tactile feel when used as a Kubotan, while flattened and grooved areas at the front promise a comfortable grip when writing. The bulky Midgard logo clip pushes large-capacity refills (ISO 12757-2) outward and into the pen. Supplied with a hardened steel glass breaker at the end of the grip.
* Weight: 54g
* Total length: 146mm.
* Material: aluminum 6061
* Glass breaker tip: hardened steel.
* Ink: black with standard refill, ISO 12757-2 compatibleBO-09BO140 -
Boker Plus - Wordlwide 2.0 Slipjoint - Stonewashed 440C & OD Green G10 - 01BO798 - knife
EDC is its home - the world is its home! Reliable, sturdy and biting, the Boker Plus Worldwide 2.0 is a two-handed opening tactical knife whose cosmopolitan features should make it legal to carry in many countries around the world. No blocking system, no quick one-handed opening, no worries: the solid 440C stainless steel drop point blade can be opened comfortably thanks to the generous claw, while the slipjoint system equipped with a powerful spring ensures total stability and safety in use.
The refined black stonewash finish of the blade perfectly matches the ergonomic olive green G10 handle grips adding a tactical touch. The folding knife is cosmopolitan thanks to the various carrying options offered by the lanyard hole and reversible clip.
Intended Use: EDCProduction type: Industrial
Country of manufacture: China
Blade: 440C stainless steel
Blade treatment: stonewashed
Handle: made of G10, with stonewashed stainless steel inner folders
Blade length: 64mm.
Blade thickness: 2.8mm.
Total length: 155mm.
Weight: 87g.
Closure: SlipJoint
Clip: stonewashed stainless steel, removable and reversible
Sheath: -
Packaging: cardboard box with Boker Plus logos
Notes: -BO-01BO798 -
Fox - Oxylos - Satin Becut & Olive Wood - FX-616OL - hunting and bushcraft knife
Explore the power of modernity and boldness with the OXYLOS FX-616 OL knife. Embodying the quintessence of contemporary pugnacity and aggressive design, this tool is more than just a bushcraft knife: it is an icon of innovation. With a BECUT stainless steel blade that promises durability and strength, combined with a sought-after satin finish for an elegant finish, the OXYLOS is ready to take on any challenge.
The olive wood handle offers a secure and comfortable grip, while stainless steel screws ensure strength and durability. Complete with a leather sheath for safe and stylish carrying, the OXYLOS is ready to be the ideal companion for outdoor adventurers.
Masterfully crafted in Italy, the OXYLOS is more than just a knife: it is an experience, a symbol of exceptional performance and timeless style.
Intended Use: Hunting / Hiking / Bushcraft / UtilityType of production: Industrial
Country of manufacture: Italy
Blade: full tang in Becut 56/58HRC stainless steel
Blade treatment: Satin finish
Handle: Olive wood
Blade length: 130mm.
Blade thickness: 5mm.
Total length: 240mm.
Balance: On the guard branch
Weight: 270g.
Sheath: leather, belt, ambidextrous, for horizontal or vertical carry
Packaging: cardboard box with Fox logos
Notes: -FX-616OL -
Fox - Defender - Black Top Shield N690Co & FRN - FX-689B - knife
In this new edition of the Defender FX-689, we have focused our attention on the blade, introducing an extraordinary 5 mm thick N690Co blade, which gives it particularly high strength. The handle features deep transverse grooves for an extremely secure grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon) with Black Top Shield steel guard and pommel
Blade length: 170mm.
Blade thickness: 5mm.
Total length: 320mm.
Weight: 360g.
Sheath: made of Kydex, with M.O.L.L.E. compatible loops.
Packaging: cardboard box with Fox logos
Notes: -FX-689B -
Fox - Anzu by Les George - PVD MagnaCut & Bronze Aluminum - FX-560 ALBR - pocket knife
Les George designed the ANZU to have maximum handle ergonomics, ensuring a firm grip; the MAGNACUT drop point blade maximizes the cutting capacity and corrosion resistance of the steel. The VERSO Lock opening mechanism gives this knife maximum efficiency. Dual thumb pins and VERSO lock make the knife easy to open and close with both hands. The clip allows for easy carrying, making the knife always ready for use.
Intended Use: SportingType of production: Industrial
Country of manufacture:Italy
Blade:CPM-MagnaCut 59/61HRC steel
Blade finish: Black PVD
Handle: anodized aluminum with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 123g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stonewashed stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560ALBR -
Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL-CP -
Peltonen Knives - M95 Ranger Puukko - Coyote PTFE - FJP120 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Teflon coated PTFE
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP120 -
Peltonen Knives - M95 Ranger Puukko - Black Uncoated - FJP144 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. The EasyLock composite sheath allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Dual Tone, partially treated with Black Cerakote coating
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP144 -
Peltonen Knives - M95 Ranger Puukko - Black Cerakote - FJP002 - Knife
The Ranger Puukko is a versatile knife ideal for international special units and civilian use such as bushcraft, hunting and camping.
Made with precision and high-quality materials, it offers a secure grip, a sharp blade and a practical sheath. No frills, it ensures safety and consistent performance in all seasons and circumstances. EasyLock composite scabbard allows for safe and quiet carrying.
It synthesizes the traditional Puukko with the ruggedness of a military knife, symbolizing perseverance and the pursuit of perfection. The Ranger Puukko is a reliable companion in any environment, embodying the resilience and functionality of Nordic knives.
Intended Use: Hiking / Hunting / BushcraftType of production: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 59HRC
Blade treatment: Black Cerakote
Handle: TPV (vulcanized thermoplastic)
Blade length: 150mm.
Blade thickness: 4.25mm.
Total length: 273mm.
Weight: 198g.
Sheath: composite material
Packaging: cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP002 -
Peltonen Knives - M23 Ranger Cub Black - FJP305 - Puukko Knife
The M23 Ranger Cub knife features a 6.5-centimeter carbon steel blade with an induction-hardened edge at 62 HRC. Remember that carbon steel always requires some care, so keep the blade clean and wash and dry it after each use. You can also apply a little oil to the blade from time to time. With proper care, corrosion is kept at bay and the blade remains intact.
The handle material is TPV, thermoplastic vulcanized, a type of rubber-like plastic material that resists wear, impact, chemicals and temperature changes almost indefinitely. The secure grip remains firm even in wet conditions.
Thanks to the Kydex sheath, the knife can be easily carried on the belt in a horizontal position.
Intended Use: Hiking / Hunting / BushcraftProduction type: Industrial
Country of manufacture: Finland
Blade: hidden tang, made of 80CrV2 carbon steel at 62HRC
Blade treatment: Dual Tone
Handle: TPV (vulcanized thermoplastic)
Blade length: 65mm.
Blade thickness: 3.3mm.
Total length: 165mm.
Weight: 78g.
Sheath: Kydex
Packaging: Cardboard box with Peltonen Knives logos
Notes: Design by Juha-Pekka PeltonenPE-FJP305 -
Peltonen Knives - Replacement Kydex Sheath for M07 and M95 Models - FJP046 - Accessory
Peltonen Knives is a Finnish company renowned for producing high quality knives.
Founded in the wilds of Finnish Lapland, with over 50 years of craftsmanship experience, it combines tradition and innovation. Its knives, forged from high-quality steel, offer strength, precision and reliability. With an ergonomic and functional design, they are ideal for outdoor activities such as camping, hiking, hunting and fishing.
Peltonen Knives is committed to environmental sustainability and works with industry experts to continue to improve its products. It represents excellence in the knife industry, a trusted brand for enthusiasts and professionals alike.
KYDEX HOLDER (compatible with TekLok-type systems).
* Safe to wear, easy to pull out.
* Sturdy construction and especially waterproof
* Can be attached to the belt
* Suitable for both right- and left-handed peoplePE-FJP046 -
Peltonen Knives - Replacement Leather Sheath for M07 and M95 Models - FJP014 - Accessory
Peltonen Knives is a Finnish company renowned for producing high quality knives.
Founded in the wilds of Finnish Lapland, with over 50 years of craftsmanship experience, it combines tradition and innovation. Its knives, forged from high-quality steel, offer strength, precision and reliability. With an ergonomic and functional design, they are ideal for outdoor activities such as camping, hiking, hunting and fishing.
Peltonen Knives is committed to environmental sustainability and works with industry experts to continue to improve its products. It represents excellence in the knife industry, a trusted brand for enthusiasts and professionals alike.
3MM PREMIUM LEATHER COVER (with EasyLock system on M95 and M07 models).
* Handmade in Finland from high-quality leather.
* Offers a traditional carry option
* Features an inner plastic cavity to avoid cutting the leather
* Maintenance tip: By applying a little silicone lubricant to the inner roller, you can protect the rubber and easily slide the knife safely into the sheathPE-FJP014 -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Fox - Forest outdoor knife 576PKD - damascus blade - cocobolo - PRIVATE COLLECTION - Limited Edition
Vintage Fox collector's knife from Maniago - Limited Edition 1997
We present a one-of-a-kind example, the vintage Fox knife from Maniago, produced in 1997 and part of a limited series of only 1000 pieces. This specific knife, numbered 94, comes from a private collection and has been kept in perfect condition, retaining its original beauty and functionality intact.
Production and Origin: Made in Maniago, Italy, in 1997, part of a numbered and limited series (94/1000).
Materials: The blade is made of Damascus steel, composed of 512 hand-forged layers. The handle is made of cocobolo wood, known for its aesthetic and robust qualities.
Packaging and Authenticity: The knife is presented in a wooden box, ideal for storage or display, and accompanied by a certificate of authenticity signed by Fox's founder, Oreste Frati, which guarantees its originality and quality.
Condition: Retired from a private collection, the knife has been maintained in impeccable condition, a testament to the care and attention of its previous owners.Intended use: Collection
Blade: 512 layer damascus stainless steel
Blade production in Italy
Handle: in cocobolo pledge
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 12mm.
Balancing: -
Weight: 222g.
Closure: Back Lock
Clips: -
Sheath: -
Note: -FX-576PKD -
Fox - Anzu by Les George - PVD MagnaCut & Carbon Fiber - FX-560 CFOR - knife
Intended Use: Sporting
Type of production: Industrial
Country of Production:Italy
Blade:Steel CPM-MagnaCut 59/61HRC
Blade finish: Black PVD
Handle: 3K carbon fiber with stainless steel inner folders, anodized aluminum spacer
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 111m.
Total length: 180mm.
Thickness when closed: 14mm
Weight: 105g.
Closure: Verso Lock (modified Axis Lock)
Clip: removable and reversible, stainless steel Black Idroglider
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Les GeorgeFX-560CFOR -
Fox - Vulpis knife - Black Hydroglider M390 & Brass - FX-VP108OTB - knife
The new Vulpis series from Fox Knives wants you to fall in love with Made in Maniago technology and manufacturing innovation with the new small and versatile multi-purpose.
Intended Use: EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Black Idroglider
Handle: Brass
Blade length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 44g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.FX-VP108OTB -
Boker Magnum - Field Flipper - 01SC006 - knife
In everyday life or outside of it, the Magnum Field Flipper is an EDC knife for all occasions.
The pocket knife stands out above all by its tactically unobtrusive appearance. The black-coated 440A stainless steel blade and military green Micarta handle are attractive features. The blade opens smoothly with a ball-bearing flipper system or with a thumb pin on either side and closes reliably with a linerlock. Supplied with a lanyard hole and tip-up clip.
Type of manufacture: industrial
Blade: 440A 56HRC stainless steel
Blade finish: Teflon coated
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.8mm.
Total length: 183mm.
Weight: 108g.
Closure: liner lock
Clip: removable, stainless steel
Sheath: -
Notes: -BO-01SC006 -
Boker Plus - M.E.R.K. 1 by Vaeringi Design - D2 & Black G10 - 01BO552 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: stainless steel and G10 folders
Blade length: 93mm.
Blade thickness: 3.2mm.
Total length: 218mm.
Weight: 159g.
Clip: removable and reversible, stainless steel
Closure: Liner Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Vaeringi - tungsten carbide backstop - ball bearing opening systemBO-01BO552 -
Boker Plus - Elso Folder by Kornel Kiss - D2 & Black G10 - 01BO554 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: stonewashed
Handle: stainless steel and G10
Blade length: 85mm.
Blade thickness: 2.7mm.
Total length: 205mm.
Weight: 127g.
Clip: Removable, stainless steel machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Kornel Kiss - ball bearing opening systemBO-01BO554 -
Boker Plus - Undertow by Lorien Arnold - D2 & Black G10 - 01BO694 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade treatment: satin finish
Handle: Stainless steel and G10
Blade length: 87mm.
Blade thickness: 3.2mm.
Total length: 200mm.
Weight: 125g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: Design by Lorien Arnold - flipper opening system on ball bearingsBO-01BO694 -
Boker - TRPPR Trapper - MagnaCut & Curly Birch - 112098 - Pocket Knife
Intended Use: Sporting/collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and birch root
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112098 -
Boker - TRPPR Trapper - MagnaCut & Green Micarta - 112943 - Pocket Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Germany
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and micarta
Blade length: 82mm.
Blade thickness: 2.4mm.
Total length: 189mm.
Weight: 70g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: ball bearing opening systemBO-112943 -
Boker Plus - Collection 2024 by Les George - MagnaCut & Fat Carbon - 01BO2024 - pocket knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut steel (62/63HRC)
Blade treatment: satin finish
Handle: titanium and "Fat Carbon" carbon fiber
Blade length: 93mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 139g.
Clip: titanium, machined from billet
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, felt pouch with zipper, certificate of authenticity
Notes: Design by Les George - Numbered and limited edition of 500 pieces - ball bearing opening systemBO-01BO2024 -
Boker Magnum - Skruva knife - 01SC011 - knife
Loose screw? Far from it, because the Magnum Skruva (Swedish: screw) literally has a firm grip on everything. This is mainly due to the solid pivot screw, which forms the resting point for the ball-bearing 440A drop-point blade.
An attractive ricasso and discreet satin finish complete the visual appearance of the blade, while jimpings on the spine of the blade provide additional safety during tough cutting jobs.
The knife opens with the pinball machine; the liner lock closes the blade intuitively and reliably.
The handle is linear and ergonomic with non-slip cheeks made of light and textured G10, which guarantees an optimal grip even in the most adverse conditions.
Type of production: industrial
Blade: 440 56HRC stainless steel
Blade Treatment: -
Handle: G10
Blade length: 79mm.
Blade thickness: 2.7mm.
Closed length: 110mm.
Total length: 189mm.
Balancing: -
Weight: 100g.
Closure: liner lock
Clip: stainless steel
Sheath: -
Note: -BO-01SC011 -
Boker Magnum - Skeksis knife - 01SC008 - knife
Based on the Skeksis, fantastical creatures that mix characteristics of the bird of prey, reptile and dragon, this Magnum model is presented as an eccentric pocket knife with exceptional value for money. The ball-bearing, beak-shaped blade echoes the shape and efficiency of Skeksis, so that even complex cutting tasks are performed effortlessly.
The knife opens with both a flipper and thumb hole, while the stainless steel linerlock and grooves on the back of the blade provide good safety when working. Green G10 textured handles resemble reptile skin and provide a comfortable grip. Supplied with a lanyard hole and a point up clip.
Type of manufacture: industrial
Blade: 440 56HRC stainless steel
Blade treatment: -
Handle: G10
Blade length: 83mm.
Blade thickness: 3mm.
Length closed: 108mm.
Total length: 190mm.
Balance: -
Weight: 115g.
Closure: liner lock
Clip: stainless steel
Scabbard: -
Notes: -BO-01SC008 -
Fox - Italico Drop - FX-540OD - Black Top Shield N690Co & OD Green FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540OD -
Fox - Italico Drop - FX-540B - Black Top Shield N690Co & Black FRN - pocket knife
"The Italico was born almost on its own... Following the market novelties, which are always numerous, I thought of designing a folder that was very compact and that expressed solidity from the very first impact, once gripped. The salient features that had to be present were: an excellent grip, a prerogative I try to apply in all my designs, and a type of blade that was very usable even for heavy work, despite its small size. After the first sketches were made, the ITALICO was born." - ADG - Antonio Di Gennaro
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 59/61HRC
Blade finish: Black Top Shield
Handle: FNR (Fiberglass Reinforced Nylon)
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Weight: 78g.
Closure: LinerLock
Clip: flush, AISI 302 stainless steel with PVD treatment, removable and reversible
Packaging: cardboard box with Fox Knives logos
Notes: Design by ADG Antonio Di Gennaro - Ball bearing opening movement - Carson Flipper opening systemFX-540B -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Randall Knives - Astro Model 17 - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.
Intended use: utility/militaryType of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collectionAP-RK-17ASCP -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Black Top Shield & OD Green - FX-311OD - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.
Welcome to the next chapter of the Zero Legacy!
Intended Use: Sporting
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311OD -
Fox - Zero 2.0 Desert Warrior by Jens Anso - Black Top Shield & Black - FX-311B - knife
The Zero 2.0 Desert Warrior, an evolution of the iconic Zero, is the culmination of years of research for the perfect everyday carry knife. The new version is an homage to the rugged landscapes and harsh environments in which adventurers often find themselves. The earthy coloring of the handles and unique blade finishes evoke the spirit of the desert, a place where resilience, adaptability and strength are paramount.
The addition of an opening hole in the blade transforms this knife into a one-handed wonder. The handle is a work of art in itself, featuring the distinctive Anso Texture. This knife is more than a tool: it is a trusted companion for those who dare to explore, conquer and thrive in any environment.
Welcome to the next chapter of the Zero Legacy!
Intended Use: Sporting
Type of production: industrial
Country of manufacture: Italy
Blade: stainless steel Becut 56/58HRC
Blade finish: Black Top Shield
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 97m.
Total length: 160mm.
Sleeve thickness: 15mm.
Weight: 56g.
Locking mechanism: back lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jens AnsoFX-311B -
Boker Plus - Kwaiken American Tanto by Lucas Burnley - D2 & Black G10 - 01BO512 - knife
In the Kwaiken American Tanto, the Oregon knife designer combines elements of Japanese and American styles. The flipper opens the silk-smooth D2 Tanto blade and locks with the reliable linerlock. The Tanto blade features a straight back and a second curved cutting edge at the front that runs straight to the tip-ideal for precise cuts. The exclusive claim is emphasized by the lightweight G10 handle grips, which give the all-black knife a very distinctive and harmonious appearance.
The slim design and exclusive material make the Kwaiken a classy men's knife with a tactical touch. It comes with a high-quality nylon case for storage and a deep, removable carry tip-up clip.
Intended Use: Tactical/Sportsman
Production Type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: black coating
Handle: stainless steel and G10
Blade length: 90mm.
Blade thickness: 3.1mm.
Total length: 212mm.
Weight: 120g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: design by Lucas Burnley - flipper opening system on ball bearingsBO-01BO512 -
Boker Plus - Swoopy Framelock Folder - Nitro-V & Sand G10 - 01BO693 - knife
The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.
The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.
Intended Use: EDC / Sporting
Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael BurchBO-01BO693 -
Fox - Jupiter - Acid Stonewash M390 - Titanium & Jungle Wear Carbon Fiber - FX-555TiCF - knife
The Jupiter folder represents the culmination of the evolution of the locking system already used on the well-known Radius and Saturn, compared to which it gains a new safety lock that allows the blade to inhibit rotation in both the open and closed positions.
The design takes up the salient features of the two previous models, managing to integrate even better the round element that houses the mechanics. The blade, devoted to maximum practicality, makes the Jupiter the ideal companion in both urban and woodland environments: the tip is sturdy, while the cutting edge has a smooth, steady curvature that is fully usable and easily resharpened.
The handle shines in ergonomics, featuring a wide recess for the index finger and generous space for the other fingers.
Intended Use: Sporting/Collection
Type of production: Industrial
Country of manufacture: Italy
Blade: stainless steel M390 59/61 HRC
Blade treatment: Acid Stonewash
Handle: sandblasted titanium with "Jungle Wear" green carbon fiber inserts
Blade length: 78mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 195mm.
Weight: 148g.
Closure: Fingers Safe Opening System
Clip: Titanium, machined from billet
Packaging: cardboard box, drawer-style, with Fox Knives logos - leather sheath, hydroformed, belt
Notes: Design by Denis SimonuttiFX-555TICF -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Boker Plus - Makri by Kornel Kiss - 02BO089 - knife
The Zeitgeist is the sum total of those visions that are born in the present, shape an entire era, and are long gone by the creative minds that generated them. As a specialist in tactical and outdoor knives, Hungarian free spirit and knife maker Kornel Kiss regularly dares to look beyond the tip of his nose and, in the Boker Plus Makri, combines the elements of a practical EDC knife with the advantages of a Kukri blade, whose historical origins go back to Nepal.
Intended Use: UtilityProduction Type: Industrial
Country of manufacture: China
Blade: ful tang in D2 steel
Blade finish: Blacwashed
Handle: G10
Blade length: 71mm.
Blade thickness: 3mm.
Total length: 159mm.
Weight: 94g.
Sheath: made of Kydex, with Tek-Lok type attachment
Packaging: cardboard box with Boker Plus logos
Notes: Design by Kornel KissBO-02BO089 -
Boker Plus - Kaizen Flipper Knife - All Black G10 & S35VN - 01BO689 - knife
Intended Use: EDC / Sporty
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: Teflon coating
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO689 -
Boker Plus - Kaizen Flipper Knife - Gray G10 & Satin S35VN - 01BO678SOI - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO680SOI -
Boker Plus - Kaizen Flipper Knife - Gray G10 & Satin S35VN - 01BO678SOI - knife
Intended Use: EDC / Sporting
Production type: Industrial
Country of Production: China
Blade: stainless steel CPM-S35VN
Blade treatment: satin finish
Handle: G10
Blade length: 76mm.
Blade thickness: 1.9mm.
Total length: 180mm.
Weight: 46g.
Clip: stainless steel, removable
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: opening via "Minimalist Flipper" system on ball bearings - Design by Kansei MatsunoBO-01BO678SOI -
Boker - Mini Bronco 80CrV2 Bushcraft Knife - 121505 - knife
Intended Use: Utility
Production type: Industrial
Country of Production: Germany - Solingen
Blade: ful tang 80CrV2 steel
Blade finish: Stone Washed
Handle: TPE
Blade length: 89mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Weight: 137g.
Sheath: kydex
Packaging: cardboard box with Boker Germany logos
Notes: -BO-121505 -
Boker Plus - Kihon DC GFN Knife - 01BO800 - Lucas Burnley - Folding Knife
The American custom knife maker Lucas Burnley embodies the concept of Japanese Kihon with the design of the Boker Plus Kihon DC. The term originally encompasses the fundamental principles and basic techniques of Japanese martial arts, which Burnley translates into practicality in the solid everyday pocket knife.
The features and linear design are evidence of a high level of practicality, providing the knife with a decisive price-performance advantage and an ideal basis for daily cutting tasks. The satin-finished drop-point blade made of D2 opens smoothly via the removable thumb stud thanks to the ball bearing, while the slide lock of the crossbar ensures intuitive, safe, and practical unlocking of the knife.
The non-slip handle with textured squares is made of high-strength GFN and fits comfortably in the hand. Orange anodized rings around the blade axle screw and the large handle screw give the Kihon a refined touch. Supplied with a lanyard hole and a convertible tip-up wire clip for flexible carrying options.
Intended use: EDC / Sporting
Production type: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: Satin finish
Handle: GFN
Blade length: 82mm.
Blade thickness: 3.2mm.
Overall length: 200mm.
Weight: 105g.
Clip: Steel, removable and reversible
Locking mechanism: Axis lock
Packaging: Cardboard box with Boker Plus logos
Notes:BO-01BO800 -
Fox - Tur Fixed G10 Multicolor by Vox - FX-529 TR- N690 Steel - Sports Knife
Usage: Sports
Type of Production: Industrial
Country of Production: Italy
Blade: Full tang in N690Co stainless steel
Blade Treatment: Black Hydroglider
Handle: Multicolor G10
Blade Length: 110mm
Blade Thickness: 4mm
Total Length: 220mm
Balance: -
Weight: 160g
Sheath: Kydex
Packaging: Cardboard box with Fox logos
Notes: Design by Jesper VoxnaesFX-529TR -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Boker Plus - Knife Kit by Raphael Durand - Advent Calendar 2023 - 01BO902 - knife
Christmas is the time of year when traditions and special moments are celebrated with enthusiasm. One of these traditions is the advent calendar, and Boker has decided to revisit it in a unique way.
The complete kit for a high-quality pocket knife
Inside, you will find everything you need to assemble a high-quality pocket knife, ready to be assembled. Every day a piece of the knife, which will allow you, in the end, to build your custom knife. The kit includes elements such as the blade, various handles for customizing the handle, precision screws, useful accessories, and some surprises that will make every day a unique emotion.
Intended use: EDC/Gentleman
Type of production: Industrial
Country of production: East
Blade: in D2 steel
Blade treatment: satin
Handle: micarta and carbon fiber
Blade length: 80mm.
Blade thickness: 3.0mm.
Total length: 185mm.
Weight: 71g.
Closure: back lock
Packaging: Cardboard box with Boker logos
Notes: Design by Raphaël DurandBO-01BO902 -
Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / CollectionType of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:AP-C81GS -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
Boker Plus - Kwaiken Sym by Lucas Burnley - 01BO635 - knife
In the Kwaiken Sym, Oregon knife designer Lucas Burnley brings the idea of symmetry and harmony in line with Japanese philosophy. The flipper resembles a parry element and allows for safe and intuitive use. The linerlock, which locks the sharp spearpoint blade on one side, is made of 154CM coated in black.
The exclusive claim is underscored by the noble titanium bolster handle and G10 handle grips, which harmoniously give the all-black knife a very distinctive look. The slim design and exclusive material make the Kwaiken a noble cross between a sports knife and a tactical knife. It comes with a high-quality nylon case for storage.
Intended Use: Tactical/Sporting
Production Type: Industrial
Country of manufacture: Taiwan
Blade: stainless steel 154CM
Blade treatment: black coating
Handle: titanium and G10
Blade length: 91mm.
Blade thickness: 2.9mm.
Total length: 215mm.
Weight: 123g.
Clip: removable, stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, zippered nylon pouch
Notes: design by Lucas Burnley - flipper opening system on ball bearingsBO-01BO635 -
Boker Plus - S-Rail by Darriel Caston - 01BO556 - folding knife
The innovative Boker Plus S-Rail is a lightweight knife equipped with a one-sided ground D2 blade that is slid frontally and manually from the handle. As with all-purpose knives, the lock is unlocked by pressing a button, and the satin-finished blade manually moves forward or backward. A halfway stop further enhances work safety.
The CNC-machined black G10 handle cheekpiece fits comfortably in the hand despite the pocket knife's small size. Equipped with a lanyard hole, a deep carry clip (tip down) that doubles as a money clip, and a high-quality nylon pouch for storage.
Intended Use: EDC / Sporting
Production type: Industrial
Country of manufacture: China
Blade: D2 steel
Blade treatment: Satin finish
Handle: G10
Blade length: 51mm.
Blade thickness: 2.5mm.
Total length: 126mm.
Weight: 26g.
Clip: removable, deep pocket, stainless steel
Closure: Slide Lock (modified Button Lock)
Packaging: cardboard box with Boker Plus logos
Notes: design by Darriel CastonBO-01BO556 -
Boker Plus - Dvalin Folder Drop Knife - D2 - G10 Black - 01BO548 - knife
As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.
However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.
The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.
The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.
With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.
Intended use: Utility
Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -BO-01BO548 -
Boker Plus - Dvalin Folder Tanto Knife - D2 - G10 Black - 01BO549 - knife
As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.
However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.
The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.
The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.
With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.
Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -BO-01BO549 -
Boker Plus - Gemtek Knife - D2 - G10 - by A. De Santis - 01BO553 - knife
Rigorous efficiency or flexible dynamics? - A question that doesn't even arise for Alessandra de Santis's Boker Plus Gemtek. It can do both, not to mention the nuances in between. The designer from Hydra Design is known for her spirited creations with maximum functionality.
The Gemtek confidently joins this series and presents itself as a folding knife with a Frame Lock mechanism, featuring a Modified-Droppoint blade in high-performance D2 steel, which opens with a Flipper and impresses with its stonewash finish and a decorative false edge.
The handle front is made of gray G10, equipped with a discreet triangular texture for optimal grip. Carefully balanced elements such as the red spacers with an integrated loop and a G10 triangle on the back, reflecting the structure of the handle's front, elegantly complete the pocket knife's appearance.
The Tip-Up (r) clip allows for deep carry, ensuring the knife almost entirely disappears in the pants pocket. It comes with a high-quality nylon case for storage.
Intended use: Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: in D2 steel
Blade finish: Stonewashed
Handle: G10
Blade length: 72mm.
Blade thickness: 3.7mm.
Total length: 176mm.
Weight: 132g.
Clip: removable stainless steel
Locking mechanism: Frame Lock
Packaging: nylon zippered case - cardboard box with Boker Plus logos
Notes: opening with Carson Flipper system on ball bearings - design by Alessandra De SantisBO-01BO553 -
Boker Plus - Andhrimnir Mini Knife by Midgards knife - 02BO091 - knife
In Norse mythology, Andhrimnir tirelessly took care of the physical well-being of the gods and the honorably fallen heroes, who thoroughly enjoyed their existence in the carefree warriors' paradise, Valhalla.
For this purpose, he slaughtered the beast Sæhrimnir day after day, which was then resurrected at night to be eaten again the following day. A fleeting glance at Midgard (the Norse term for earth/world) would have elevated the chef's status even further in the eyes of the gods. This is because the knife craftsman Dirk Hofmeister knows like no other how to create mythical blades infused with Norse magic.
The Andhrimnir Mini bears the unmistakable hallmarks of Midgard's full tang constructed knives, with a 6mm thick Wharncliffe blade made of D2 in a two-tone finish with grooves on both sides and jimpings to ensure optimal functionality and maximum stability for all daily cutting tasks. The ergonomic and milled handles* made of G10 allow for comfortable and effortless work.
The custom-fitted Kydex sheath with a full-sized belt adapter, as well as a lanyard hole, harmoniously round off the package and revive the spirit of the Vikings in the fixed blade knife. * Other handles in a wide range of shapes and colors can be directly downloaded from us as a file for the home 3D printer or custom-made by Midgards Messer.
Intended use: Utility
Type of production: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: Dual tone (Satin + Black)
Handle: G10
Blade length: 85mm.
Blade thickness: 6mm.
Total length: 150mm.
Weight: 182g.
Sheath: In Kydex, with attachment
Packaging: Cardboard box with Boker Plus logos
Notes: Design by Midgards MesserBO-02BO091 -
Boker - 1969 Camaro Z28 Damast by Tommaso Rumici - 111101DAM - knife
Designed by Tommaso Rumici, the knife is "muscular" and unique, combining the Camaro Z28's distinctive features of shape and strength. The elegant Damascus blade, hand forged by Chad Nichols with 80 layers in the "Tread" pattern, is reminiscent of the muscle car's sloping hood. To that end, parts from the upper suspension arm of the original vintage Camaros were used to forge the blade.
Based on an analysis of the color of an original model, the "Le Mans Blue" lacquer finish was created especially for Boker for the aluminum handle, which interprets the body lines in a nostalgic way and is enriched with exciting details. The notchback, small rear spoiler and slat-shaped air intakes on the rear fenders have been beautifully integrated into the knife. The blade axle screw is lovingly inspired by the rims often used on muscle cars, while the straight-line stainless steel clip, milled from billet, is reminiscent of chrome door handles.
Intended Use: Sporting / Collection
Type of production: Industrial
Country of manufacture: Germany - Solingen
Blade: Handcrafted Damascus "Tred" by Chad Nichols made from the suspension of old Camaros
Handle: Aluminum painted "Le Mans Blue" metallic color
Blade length: 80mm.
Blade thickness: 3.6mm.
Total length: 186mm.
Weight: 99g.
Closure: Liner Lock
Clip: stainless steel
Packaging: Display case with Boker logos, fabric knife case, warranty certificates
Notes: Limited edition numbered on the back of the knifeBO-111101DAM -
Fox - TRIBAL K Fixed Karambit by Doug Marcaida - FX-803 - Knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Black Idroglider
Handle: G10
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 148mm.
Weight: 97g.
Sheath: kydex, with double Ulti-Clip attachment system
Packaging: cardboard box with Fox logos
Notes: Design by Doug MarcaidaFX-803 -
Fox - Tokala Fixed Knife - Bison Micarta - FX-105MB - Design by Reichart Markus - knife
Intended use: Utility / Tactical / Outdoor
Type of production: Industrial
Country of production: Italy
Blade: Niolox 59/61HRC stainless steel with Black Idroglider finish
Handle: Bison Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced by 1cm
Weight: 235g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -FX-105MB