Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

The Swoopy makes a splash! Knife designer and U.S. Marine Corps expert Michael Burch, from the U.S. state of Idaho, performs like no other on the EDC stage with this new Boker Plus. Fine materials, elegant features, and high-quality workmanship mean the Swoopy has plenty of groupies.

The Modified-Wharncliffe Nitro-V ball-bearing blade with stonewash finish opens smoothly through the thumb hole; the sturdy stainless steel frame lock and non-slip catches ensure safe work even in tough conditions. Vertical grooves in the sand-brown G10 handle's front cheekpiece ensure a firm grip and stylishly reflect the knife maker's tactical experience. The tip-up clip and lanyard hole make the knife pocket-sized and easy to carry.

Intended Use: EDC / Sporting

Production type: Industrial
Country of manufacture: China
Blade: Nitro-V stainless steel
Blade finish: stonewash
Handle: G10 and stonewash stainless steel
Blade length: 79mm.
Blade thickness: 3.1mm.
Total length: 180mm.
Weight: 93g.
Clip: removable, stainless steel
Packaging: cardboard box with Boker Plus logos and cordura pouch with zipper
Notes: design by Michael Burch

As one of the four blacksmiths, the dwarf Dvalin created the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel is attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on the earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to unleash wars in the world of men. Dirk Hofmeister of Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto impresses with its compact dimensions and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep engraving on both sides to open the folding knife using the recess as a nail lever.

The engraving on the top of the blade offers a secure grip for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partly grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in various shapes, colors, and materials. The Tip-Up (r) clip matches the handle's texture, while the lanyard hole increases ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility

Type of production: Industrial
Country of production: China
Blade: in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

As one of the four smiths, the dwarf Dvalin crafted the Brisingamen necklace for the Germanic goddess of love, Freya. In Norse mythology, this special jewel was attributed with magic, love, but also pain and suffering. Freya's tears in the sky always promised rich fruits on earth.

However, it was the wrath of the father of the gods, Odin, that often drove the goddess of love to instigate wars in the world of men. Dirk Hofmeister from Midgards Messer was inspired by the art of Nordic forging and created the folding blade version of the beloved Little Dvalin.

The powerful Dvalin Folder Tanto stands out for its compact size and features a Tanto blade in D2 steel with ball bearings, finished with a rough stonewash appearance and equipped with a deep groove on both sides for opening the folding knife using the recess as a nail lever.

The groove on the top of the blade provides a secure support for the thumb during complex cutting operations. Despite the wrath of the gods, the well-formed and partially grooved G10 handle always fits firmly in the hand. On the back of the handle is the stainless steel Frame Lock that securely locks the blade.

With a commercial 3D printer, it is possible to print alternative handles in a variety of shapes, colors, and materials. The Tip-Up (r) clip mirrors the texture of the handle, while the hole for the lanyard enhances ease of use. It comes with a high-quality nylon case for storage.

Intended use: Utility
Production type: Industrial
Country of production: China
Blade: full tang in D2 steel
Blade finish: stonewash
Handle: G10
Blade length: 71mm.
Blade thickness: 5.1mm.
Total length: 167mm.
Weight: 157g.
Clip: in steel
Packaging: cardboard box with Boker Plus logos
Notes: -

Lucas Burnley's Boker Plus Kwaiken Flipper is arguably one of the most influential designs of the 21st century. With its clear and practical shape, this modern pocket knife has become a true icon. The clean lines and slim design, which nevertheless accommodates the entire blade when closed, are absolutely unique.

It is the further development of the well-known Burnley Kwaiken Classic, a knife also in the neo-Japanese style. The flipper ensures intuitive operation and increased safety, while the titanium framelock with stainless steel insert securely locks the M390 steel ball bearing blade.

The exclusive claim of this premium version, strictly limited to 500 pieces worldwide, is underlined by the carbon fiber handle scales with green inserts. The slim design and exclusive material make the Kwaiken a noble crossover between a gentleman's tool and a tactical combat knife.

To make this connection even easier, the Kwaiken Mini Limited offers the same outstanding qualities of its big brother with significantly smaller (and therefore more pocket-friendly) dimensions. The titanium clip is milled from solid, allowing it to be tipped up (r). Supplied with high quality nylon case.

Intended use: Sports/collection

Type of production: Industrial
Country of production: Taiwan
Blade: M390 steel
Blade treatment: satin finish
Handle: in titanium and carbon fiber
Blade length: 78mm.
Blade thickness: 3.2mm.
Total length: 184mm.
Weight: 79g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley limited edition of 500 pieces - pinball opening system on ball bearings

The great success of the Boker M4 Sherman Damascus, due not only to the history of the historic Damascus steel but also to the design, prompted us to use this as the basis for a performing and pleasant EDC with a titanium framelock, which, despite the metallurgy of the blade powders, also carries a real piece of M4 Sherman Damascus.

For the blade of the Sherman EDC we used Magnacut for the first time, which is not without reason celebrated as a "miracle steel". Unlike the usually used tool steels, this steel was specially developed for the production of knives. The three desirable properties of a steel - edge retention, toughness and resistance to rust (stainless in the DIN category) - represent a conflict of goals. To make the steel resistant to rust, the addition of chromium is necessary, which makes the structure coarse, brittle and prone to fracture under normal conditions. The high hardness, which has a positive influence on the cutting life, is usually achieved at the expense of toughness. With Magnacut, despite the high chromium content of 10.7% and an impressive hardenability of over 62HRC, it was possible to achieve a very fine microstructure and thus a high toughness and shock load tolerance. The addition of nitrogen plays a central role here.

The central structural difference compared to the M4 Damascus model is the elegantly integrated flipper, which allows the blade to open smoothly with a small impulse.

A special highlight of the Boker Sherman EDC is the protruding Damascus backspacer, which is equipped with a lanyard hole in an elongated slot design. The Damascus of the backspacer was forged from various materials from Chad Nichols' M4 Sherman tank production in the Customized Ladder pattern and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: MagnaCut steel
Handle: in steel and micarta
Blade length: 75mm.
Blade thickness: 3mm.
Total length: 178mm.
Weight: 95g.
Clip: stainless steel
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: Certificate of Guarantee - Case in gray box

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: Blackwash
Handle: Micarta and Blackwash Steel
Blade length: 71mm.
Blade thickness: 2.8mm.
Total length: 165mm.
Weight: 67g.
Clip: stainless steel, removable
Closure: Frame Lock
Packaging: nylon zippered pouch - cardboard box with Boker Plus logos
Notes: design by Mike Skellern

Intended Use: EDC / Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: 110-layer stainless damascus steel
Blade treatment: satin finish
Handle: Titanium 
Blade length: 78mm.
Blade thickness: 3.8mm.
Total length: 173mm.
Weight: 76g.
Clip: stainless steel, removable
Closure: FrameLock with stainless steel clapper
Packaging: zippered nylon pouch - cardboard box with Boker Plus logos
Notes: opening via Carson Flipper system on ball bearings

The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.

The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.

The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings

The elegant Boker Plus Zenshin is reminiscent of the famous Higonokami pocket knives, manufactured in the Japanese city of Miki since 1896. Unlike the original Japanese versions, the body of the knife handle is not made from a single piece of folded metal, but from flat plates in steel with a sturdy stonewash finish. The 440C slipjoint blade has an elaborate two-tone finish. In this version it is equipped with a frame lock. With lanyard hole.

Intended use: Sports

Type of production: Industrial
Country of production: Asia
Blade: 440C stainless steel
Blade treatment: Dual Tone
Handle: in steel
Blade length: 75mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 60g.
Clip: -
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Note: -

The practical Connector of Boker Plus bears the unmistakable signature of the Polish cutler Jakub Wieczorkiewicz, now known all over the world for the quality of his production. The Connector is equipped with a spear point blade, CPM-S-35VN steel, on ball bearings. Made with an excellently machined titanium handle.

Intended use: EDC / Sports

Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN steel
Blade treatment: satin finish
Handle: Titanium
Blade length: 75mm.
Blade thickness: 3.2mm.
Total length: 176mm.
Weight: 88g.
Clip: removable steel
Closure: frame lock
Packaging: cardboard box with Boker Plus logos
Notes: opening via ball bearing system - design by Jakub Wieczorkiewicz

The modern Boker Plus Aphex Mini is the scaled-down version of the Boker Plus Collection 2020 designed by Lucas Burnley. The finely sharpened blade is made from VG-10 and comes with an impressive finish. Thanks to the ball bearings and pinball machine, the knife is particularly easy to open. The ergonomically shaped handle is three-dimensionally milled from titanium and decorated with a modern carbon fiber inlay.

Intended use: Collection

Type of production: Industrial
Country of production: Taiwan
Blade: in VG10 steel
Blade treatment: Satin
Handle: titanium with carbon fiber insert
Blade length: 78mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 96mm.
Weight: 78g.
Clip: titanium
Closure: Frame Lock
Packaging: cardboard box with Boker Plus logos, Nylon case with zip
Notes: Design by Burnley

Intended Use: Sporting/Collection

Production type: Industrial
Country of Production: Taiwan
Blade: D2 steel
Blade treatment: satin finish
Handle: titanium and carbon fiber marbled
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 183mm.
Weight: 75g.
Clip: stainless steel
Closure: frame lock
Package: cardboard box with Boker Plus logos, nylon pouch with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening system

The stunning Boker M4 Sherman-Damascus is a living piece of history and combines high quality craftsmanship with historical materials. The American M4 Sherman was designed in 1940 and is considered to be one of the most famous tanks in history. It was produced between 1942 and 1945, remained in service until 1957 and was used on all battlefields of World War II - not only by the United States and Canada, but also by Britain, by French forces. , from China and even the Soviet Union.

The Boker Sherman-Damascus features a unique 80-ply Damascus blade, forged with materials sourced from the production of the M4 Sherman tanks, previously restored by the museum. The unique damask is hand-forged for Boker by Chad Nichols and resembles the tank tracks left in the ground by the heavy chains of the M4 Sherman. The ball bearing blade fits into a solid steel frame block.

The overall shape of the knife is a tribute to the aesthetic lines of the tank, while the decorative screw of the blade axis is modeled on the characteristic main transmission pinion. The slightly contoured canvas micarta handle fits comfortably in the hand and the color is reminiscent of the camouflage paint used by both the United States Army and Marine Corps.

Sold with transparent display and with certificates of authenticity and individual serial number.

A portion of the proceeds from each knife sold goes to the Americans at the Wartime Museum to support educational programs and the care and preservation of these proud examples of American history. The Americans in the Wartime Museum is a nonprofit cultural and educational institution dedicated to honoring those who have served in all branches of the U.S. military and on the home front from World War I to the present.

Intended use: Collection

Type of production: Industrial
Country of production: Germany
Blade: 80-layer stainless steel damascus, from parts of the M4 Sherman
Handle: in steel and micarta
Blade length: 77mm.
Blade thickness: 3.5mm.
Total length: 175mm.
Weight: 107g.
Clip: in stainless steel
Closure: Frame Lock
Packaging: PVC display case that lets the knife "float" inside, making it visible from all sides
Notes: Warranty Certificate - Gray cotton case - Numbered copy on the handle