Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
Boker Plus - Scalpel by Alexander Krava - D2 - 02BO072 - neck knife
Surgical precision, a clean cut, and a sense of pride in what you've achieved: the Böker Plus scalpel knife by Alexander Krava provides the dexterity needed for everyday, delicate cutting tasks. The compact all-steel construction in D2 is modeled on a scalpel but convinces as an absolutely practical neck knife.
The bulbous blade has a satin finish and cuts through cardboard boxes with equal concentration and effortlessness, and steps in for crafts where scissors can go no further. Epoxy handle inserts and serrations on the wrist rest increase control while working. Supplied with a black ball chain and custom-made Kydex sheath.
Intended Use: Tactical / CQB
Production type: Industrial
Country of manufacture: Taiwan
Blade: D2 steel
Blade treatment: Stone Washed
Handle: D2 steel
Blade length: 42mm.
Blade thickness: 2.6mm.
Total length: 125mm.
Balance: -
Weight: 14g.
Sheath: Neck, in Kydex
Packaging: Cardboard box with Boker Plus logos
Notes: Design Alexander KravaBO-02BO072 -
Boker Plus - Fragment EDC knife - 01BO660 - folding knife
The outstanding Boker Plus Fragment convinces as a light EDC or backup knife with an extremely reduced design.
The practical pocket knife completely dispenses with a front handle and instead relies on a minimalist rod that connects the blade axis screw.
The blade is made from 9Cr13CoMoV steel and, like the entire all-steel tang construction, is finished in a dark stonewash finish.
The operational safety of the modern slipjoint pocket knife is further enhanced by a 90 degree stop device when opening and closing the blade. Equipped with hole for lanyard and practical clip for transport.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Taiwan
Blade: 9Cr13MoV stainless steel
Blade treatment: blackwash
Handle: titanium
Blade length: 50mm.
Blade thickness: 2.5mm.
Total length: 130mm.
Weight: 31g.
Clips: -
Closure: Slip Join
Packaging: cardboard box with Boker Plus logos
Note: -BO-01BO660 -
Boker Plus - Rocket Titan by Darriel Caston - 01BO264 - folding knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel 9Cr13CoMoV
Blade treatment: blackwash
Handle: titanium
Blade length: 44mm.
Blade thickness: 3.2mm.
Total length: 107mm.
Weight: 37.5g.
Clip: -
Closure: Liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Darriel Caston01BO264 -
Boker Plus - DW-2 by Chad Los Banos - 01BO574 - folding knife
Intended use: EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8
Blade treatment: satin
Handle: Zytel and Steel
Blade length: 41mm.
Blade thickness: 2 mm.
Overall length: 102mm.
Weight: 42g.
Clips: stainless steel
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Chad Los BanosBO-01BO574 -
Boker Plus - BabyX knife - 01BO366 - D2 steel - folding knife
Distinctive, elegant and timeless: the Boker Plus BabyX Flipper Steel carries the unmistakable DNA of designer Darriel Caston as a compact and elegant EDC knife. Far from the usual conventions, the designer has equipped the pocket knife with impressive details that will inevitably make the hearts of countless knife enthusiasts beat faster.
The blade worked on ball bearings with a satin finish is made of D2 steel which can be opened using a flipper system.
The framelock blends perfectly with the lines and completes the usual performance of the Boker Plus.
As an additional highlight, the shiny clip creates a harmonious contrast to the otherwise subdued look of the folding knife. Convenient lanyard hole allows for additional attachment options.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Taiwan
Blade: D2 steel
Blade treatment: satin
Handle: G10
Blade length: 40mm.
Blade thickness: 3mm.
Total length: 104mm.
Weight: 47g.
Clips: -
Closure: Frame lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Darriel CastonBO-01BO366 -
Boker Plus - Rocket G10 by Darriel Caston - 01BO263 - knife
Intended use: EDC / Sports
Type of production: Industrial
Country of production: Taiwan
Blade: 440C stainless steel
Blade treatment: blackwash
Handle: G10
Blade length: 44mm.
Blade thickness: 3.2mm.
Total length: 107mm.
Weight: 34g.
Clip: -
Closure: Liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Darriel CastonBO-01BO263 -
Boker Plus - Dog Tags by John Kubasek - 01BO210 - folding knife
Intended use: EDC / neck
Type of production: Industrial
Production Country: Taiwan
Blade: 440C Stainless Steel
Blade treatment: satin
Handle: Titanium
Blade length: 43mm.
Blade thickness: 1.7mm.
Overall length: 96mm.
Weight: 24g.
Clip: -
Closure: button magnetic lock; blocks both in opening and closing
Packaging: cardboard box with Boker Plus logos
Notes: Design by John Kubasek - supplied with chain from the neckBO-01BO210 -
Boker Magnum - Lil' Friend Neck Knife - 02SC743
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: China
Blade: stainless steel 440C
Treatment Lama: Dark Stone Washed
Handle: G10
Blade length: 35mm.
Blade thickness: 2.7mm.
Length closed: -
Total length: 85mm.
Thick when closed: -
Balancing: -
Weight: 38g.
Closing: -
Clip: -
Sheath: Kydex, neck
Packaging: Cardboard box with logos Boker Magnum
Notes: -BO-02SC743