Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

FLAME LIGHT, practical folding knife and now even lighter!

BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.

Intended Use: Sporting

Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael Zieba

The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.

The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.

The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.

Intended use: Sports / collection

Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings

Intended Use: Sporting / Collection

Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening system

Intended Use: Sporting/EDC

Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Closure: Framelock
Clip: titanium, removable, deep pocket type.
Scabbard: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos 
Notes: Tungsten carbide rear glass breaker - Design by Bob Terzuola

Intended Use: Hunting / Utility

Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finish: Satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.1mm.
Total length: 293mm.
Weight: 374g.
Scabbard: leather
Package: cardboard box with Boker logos
Notes: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: in 440C stainless steel
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 176mm.
Weight: 47g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearings

Intended Use: EDC/Gentleman

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: Satin finish 
Handle: G10
Blade length: 67mm.
Blade thickness: 2.7mm.
Total lenght: 150mm.
Weight: 33g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: - 
Package: Cardboard box with Boker logos
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 2.5mm.
Total length: 183mm.
Weight: 60g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

Intended Use: Sporting

Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper 
Notes: Design by Lucas Burnley - ball bearing flipper opening system

GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.

With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.

Intended Use: Sporting

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: Satin finish
Handle: Micarta, with stainless steel embedded liners and titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: Titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens Anso

A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper

Intended use: Sports

Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Stonewashed
Handle: Stainless steel and Green Canvas Micarta
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 110g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper Voxnaes