Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Sanelli premana - 5-piece cherry wood knife block - Ergoforge line - 992055T
Sanelli premana - 5-piece cherry wood knife block - Ergoforge line - 992055T
Natural cherry wood knife block with a round shape and characteristic grain.
The practical knife block for the modern kitchen, which can be placed on the accessory bar, allows knives to be at hand without taking up space on the kitchen countertop.Contains:
- ROAST KNIFE 22 cm.: Knife with a semi-rigid blade, ideal for slicing cooked meats (e.g., roasts, boiled meats).
- BREAD KNIFE 22 cm.: semi-rigid serrated blade knife, ideal for slicing bread, buns and pizzas.
- SAUSAGE KNIFE 22 cm.: semi-rigid-bladed knife, ideal for small/medium-sized cold cuts (e.g., salami, coppa, bacon).
- KITCHEN KNIFE 16 cm.: rigid-bladed knife ideal for cutting and peeling fruits and vegetables.
- FORK KNIFE 33 cm.: two-pronged fork with a forged blade.Knives in the Ergoforge line are individually forged in one piece.
Stainless steel blades.
Acetal resin handles with stainless steel rivets.
Entirely handcrafted.992055T -
Bastinelli Knives - Picolomako - Karambit - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 76mm.
Blade thickness: 3mm.
Closed length: -
Overall length: 187mm.
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-05 -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Citadel - Fidel Buffalo Slipjoint Knife - 207CR - handmade knife
Intended use: collectible/sporting
Type of production: Handcrafted
Blade Production: Cambodia
Blade: DNH7 carbon steel selective hardening 40/60HRC
Blade Finish: mirror polished
Handle: water buffalo horn
Blade length: about 80mm.
Blade thickness: about 3mm.
Length closed: about 113m.
Total length: about 190mm.
Thickness when closed: about 17mm.
Balance: -
Weight: about 58g.
Closure: -
Clip: -
Sheath: leather pouch
Packaging: -
Notes: each knife is handmade and differs minimally in size, weights and aestheticsCI-207CR -
Sanelli - American Olive Scimitar BBQ Knife 26cm - 1186.26 - Kitchen Knife
The Sanelli Olive American Scimitar BBQ Knife with a length of 26 cm is a kitchen knife designed specifically for grilling meat. Its curved, sharp shape is reminiscent of a scimitar blade, which allows for precise and clean cutting through larger pieces of meat.
This knife is made by Sanelli, a renowned Italian brand specializing in the production of high-quality kitchen knives. The blade is made of durable and sharp stainless steel, ensuring long-lasting performance.
The ergonomic handle provides a secure and comfortable grip during use, allowing the knife to be handled with precision and control. This makes the knife suitable for slicing, cutting and mincing different types of meat.
It is an excellent choice for grilling enthusiasts and those who like to prepare barbecued meat. It is a sturdy and reliable kitchen knife designed to meet the needs of both professional and amateur chefs.
Recommended Use: cutting cooked meats, roasts, barbecues, trimming
Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 260mm.
Total length: 400mm.
Packaging: cardboard blade cover with Sanelli logos
s118626 -
Sanelli - BBQ - Scimitar Knife 26cm - Kitchen Knife - s1196.26
Recommended Use: cutting cooked meats, roasts, barbecues, trimming
Country of manufacture: Italy
Blade: made of surgical stainless steel with a hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 260mm.
Total length: 400mm.
Packaging: cardboard blade cover with Sanelli logosFORM AND FUNCTION
The Premana Professional line was created by analyzing and solving, in every detail, the problems faced by the most attentive professional who uses these working tools on a daily basis. By making the green knives of the Premana Professional line, Coltellerie Sanelli S.r.l. has significantly improved the concept of safety, reliability, and hygiene in a decisive way, paying attention not only to the hardness, flexibility and shearing power of the blades, but also to the ergonomic shape of the handle.THE BLADES.
The convex shape of the blade provides effective support when considerable effort is required on the part of the user and is also characterized by: high hardness (54-56 HRC), good flexibility, high shearing power, long edge life, edge shape especially designed for professional use, and excellent ease of resharpening.HANDLES.
Exclusive ergonomic design of the handle resulting from special studies carried out at qualified University Institutes (research unit called EPM: Ergonomics of Posture and Movement at the Polytechnic University of Milan) and validated by computerized experimental tests.ANTIBACTERIAL PROTECTION
Sanelli and Biomaster have developed permanent antibacterial protection for the handles of Premana line knives through the use of silver ions.
Biomaster is a silver ion-based, inorganic additive suitable for imparting antibacterial characteristics to plastics that safely inhibits microbial growth from the first few minutes, reaching almost total inhibition within 24 hours. Once incorporated into a product, Biomaster becomes an integral part of it providing safe, effective and inexhaustible antimicrobial protection.
Laboratory tests have shown that Biomaster, incorporated into the handles of Sanelli Premana Professional Line knives, is effective in the permanent microbiological eradication of Escherichia Coli and Staphylococcus Aureus (MRSA) to the extent of 99.7 percent, obtaining ISO22196:20111 certification.s1196.26 -
Sanelli - BBQ - scimitar knife 30cm - s1196.30 - Kitchen knives
The Sanelli BBQ Scimitar Knife with a length of 30 cm is a kitchen knife designed specifically for cutting meat. Its curved, sharp shape is reminiscent of a scimitar blade, allowing clean and precise cutting through larger pieces of meat, such as steaks, chops or roasts.
This knife is made by Sanelli, an Italian brand that specializes in producing high-quality kitchen knives. The blade is made of durable stainless steel and sharpened to ensure long-lasting performance. The 30 cm scimitar offers sufficient length to handle large pieces of meat with ease.
The knife handle is ergonomic and made of durable material to provide a secure and comfortable grip during use. This makes the knife stable and easy to handle, allowing it to make precise cuts effortlessly and without fatiguing the hand.
It is an ideal choice for grilling enthusiasts and chefs who often work with large pieces of meat. It is a sturdy, high-quality tool designed to deliver reliable performance in the kitchen.
Recommended Use: cutting cooked meats, roasts, barbecues, trimming
Country of manufacture: Italy
Blade: surgical stainless steel with hardness of 54-56 HRC
Handle: made of sterilizable anti-corrosion polymer, with Biomaster antibacterial additive
Blade length: 300mm.
Total length: 440mm.
Packaging: cardboard blade cover with Sanelli logos
s119630 -
Bastinelli Knives - Picoeur Black knife Doug Marcaida - Scalpel Karambit Neck Knife
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox CutleryBC-07B -
Citadel - Lancha Rayskin White knife - handmade knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: stingray leather
Blade length: 90mm.
Blade thickness: 4mm.
Closed length: 120mm.
Total length: 210mm.
Thick when closed: 25mm.
Balancing: -
Weight: 188g.
Closure: liner lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -AP-CIT-LRW -
Citadel - Rossignoli Folder Big - friction folding knife - craft knife
Intended use: sports / collection
Type of production: Artisan
Production Lama: Cambodia
Blade: in DNH7 carbon steel with 40 / 60HRC selective hardening
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: 95mm.
Blade thickness: 4mm.
Closed length: 137mm.
Total length: 205mm.
Thick when closed: 23mm.
Balancing: -
Weight: 146 g.
Closure: folding with friction
Clip: -
Sheath: Cordura bag
Packaging: -
Note: -CD4211 -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBC-0618 -
Citadel - Nordic hunter knife - 288 - craft knife
Citadel - Nordic
These handmade knives are distinguished by their original but functional line, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The knife is then polished and sharpened by hand on stone and finished in every single detail.Blade: DNH7 "Bruit de forge" selective hardening 40/60 HRC steel with file-worked spine
handle: In wood with brass guard
Blade length: 70 mm.
Handle length: 115 mm.
Blade thickness: 3.5 mm.
Total length: 195 mm.
Sheath: Handmade brown leather
Weight: 154 g.CI-NORDIC -
Citadel - Japanese Aikuchi - Special Salamander - craft knife
aikuchi
processing
The blades are carbon-hardened to a hardness of about 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting capacity, penetration and flexibility. The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (breed skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 170mm. (including habaki)
Total length: 275mm.
Weight: 210g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-AI-SAL -
Bastinelli Knives - Safe Folder Frame Lock - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion SteelBA-SAFE -
Bastinelli Knives - RED Dark Stone Washed - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: G10 and Titanium Darkwashed
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Closed thickness: 13mm.
Weight: 117g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Glass Breaker - Produced by Lion SteelBA-REDB -
Bastinelli Knives - BBR2 IKBS Frame Lock - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and anodized titanium
Blade Length: 85mm.
Blade thickness: 3.5mm.
Closed length: 115mm.
Total length: 195mm.
Closed thickness: 14mm.
Weight: 99g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BBR2 -
Bastinelli Knives - Big Dragotac OD Green - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and Titanium
Blade Length: 120mm.
Blade thickness: 5mm.
Closed length: 160mm.
Total Length: 270mm.
Closed thickness: 14mm.
Weight: 236g.
Opening: removable thumbnail, ambidextrous
Washers: Teflon
Closure: Framelock with additional Rotoblock security system
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BDRG -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBA-MAKF -
Bastinelli Knives - Kalinou Karambit - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01 -
Bastinelli Knives - Kalinou Karambit Black - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01PVD -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD -
Citadel - Phan Theit Water knife - Friction folder Bufalo - handmade knife
Intended use: collection / sports
Type of production: Artisan
Production Lama: Cambodia
Blade: DNH7 carbon steel
Blade treatment: -
Handle: Water Buffalo Horn
Blade length: about 76mm.
Blade thickness: about 3mm.
Closed length: about 103mm.
Total length: about 180mm.
Thick when closed: about 15mm.
Balancing: -
Weight: about 120g.
Closure: without blade lock
Clip: -
Sheath: cordura bag
Packaging: -
Note: -CIT-PTW -
Beretta K92 bullet knife
Beretta K92 bullet knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel AUS-8
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 4mm.
Closed Length 125mm.
Overall length: 220mm.
Thick when closed: 14mm.
Balancing: -
Weight: 50g.
Lock: back lock
Clip: -
Sheath: -
Packaging: cardboard box with Beretta logos
Notes: -K92 -
Beretta - AirLight K Air 3GN - Knife
Intended Use: Sport / Collection
Type of production: Industrial
Production Blade: Japan
Blade: Stainless steel, three-layer laminate (VG2 and CoS to 60 HRC)
Treatment Blade:
Handle: Grilon
Blade length: 85mm.
Blade thickness: 3.5mm.
Closed Length 111mm.
Total length: 197mm.
Thick when closed: 24mm.
Balance: -
Weight: 170g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Fallkniven
Notes: -kar3gn -
Citadel - Stavanger Green Grey Ray Skin - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: stingray leather
Blade length: about 50mm.
Blade thickness: approx 4mm.
Closed Length: about 82mm.
Total length: about 145m.
Thick when closed: about 15mm.
Balance: -
Weight: about 78g.
Lock: Liner lock
Clip: -
Sheath: sheath
package:
Notes: -10632 -
Citadel - Baltaka Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. The knife is then polished and sharpened by hand on stone and finished in every detail.Blade: Stainless DNH7
manicatura: wood
Blade length: 130 mm.
Handle Length: 70 mm.
Blade Thickness: 4.5 mm.
Total length: 270 mm.
Sheath: Leather brown handmade
Weight: 106 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10636 -
Citadel - True Knife - custom knife
These handmade knives are distinguished by their original line, but functional, well that is coupled alletradizionali manufacturing techniques and materials used.
The blades are in fact hardened coal until Adavere a hardness of about 40 HRC after which, after having been hand-hammered, back and sides are covered with clay and the wire refreshed to 60 HRC to have excellent cutting capacity, flexibility and penetration. Each knife is then polished and sharp hand-polished and finished in every detail.Blade: Stainless DNH7
manicatura: Micarta
Blade length: 60 mm.
Handle Length: 70 mm.
Blade thickness: 4 mm.
Total length: 164 mm.
Sheath: Leather brown handmade with horizontal mounting of the knife
Weight: 122 g.Note: Being craft knives, and finishes for slightly differing from each other, the knife itself may not be identical to that represented in the images.
10635 -
Citadel - Ola in plane tree wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle: wood plane
Blade length: about 80mm.
Blade thickness: approx 4mm.
Closed Length: about 120mm.
Total length: about 210mm.
Thick when closed: about 20mm.
Balance: -
Weight: about 166g.
Lock: Liner lock
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10634 -
Citadel - Friction Folder wood - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10633 -
Citadel - Friction Folder - custom knife
WARNING: technical data of the knife are approximate and vary from knife to knife these are handmade products.
Intended Use: collection / sports
Production Type: Handmade
Production Blade: Cambodia
Blade: carbon steel DNH7
Treatment Lama: -
Handle material: wood
Blade length: about 65mm.
Blade thickness: about 2mm.
Closed Length: about 154mm.
Total length: about 185mm.
Thick when closed: about 13mm.
Balance: -
Weight: about 68g.
Closing: -
Clip: -
Sheath: -
Packaging: bag Cordura
Notes: -10362 -
Citadel - Nordic Inciso - 287 - coltello artigianale
Citadel - Nordic Big
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodich, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo ritemprato a 60 HRC per avere ottime capacit di taglio, penetrazione e flessibilit. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In Bosso con inserti in Corno di bufalo, legno di Padouk e di Ebano
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 125 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 215 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 105 g.
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3921 -
Citadel - Aizto Bufalo - 305M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 90mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 110mm.
Lunghezza totale: circa 200mm.
Spessore da chiuso: circa 18mm.
Bilanciatura: -
Peso: circa 80g.
Chiusura: -
Clip: -
Fodero: -
Confezione: -
Note: -3955 -
Citadel - Buddy Big - 217 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono indicativi e, trattandosi di prodotti artigianali, variano da coltello a coltello.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 80mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 198mm.
Lunghezza totale: circa 178mm.
Spessore da chiuso: circa 18mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3904G -
Citadel - Buddy Small - 216 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono indicativi e, trattandosi di prodotti artigianali, variano da coltello a coltello.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 73mm.
Spessore lama: circa 4mm.
Lunghezza chiuso: circa 100m.
Lunghezza totale: circa 170mm.
Spessore da chiuso: circa 16mm.
Bilanciatura: -
Peso: circa 46g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3904 -
Citadel - Camp Bufalo - 565 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: corno di bufalo
Lunghezza lama: circa 135mm.
Spessore lama: circa 5,5mm.
Lunghezza totale: circa 247mm.
Bilanciatura: -
Peso: circa 178g.
Chiusura: arretrata di 1,5 cm
Fodero: cuoio
Note: -3976 -
Citadel - Camp Knife - 171 - coltello artigianale
Citadel - Camp Knife
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
Manicatura: legno di palissandro
Lunghezza lama: 210 mm.
Spessore della lama: 5 mm.
Lunghezza totale:340 mm.
Peso: 265 g.
Bilanciatura: avanzata, a 25mm dalla guardia
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3919 -
Citadel - Evo Nordic Big - 285 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: palissandro, anelli di cuoio ed osso. guardia in silver nickel
Lunghezza lama: 94mm.
Spessore lama: 4.5mm.
Lunghezza chiuso: -
Lunghezza totale: 214mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 175g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3959 -
Citadel - Evo Nordic Small - 283 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: palissandro, anelli di cuoio ed osso. guardia in silver nickel
Lunghezza lama: 81mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: -
Lunghezza totale: 181mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 110g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3958 -
Citadel - Fidel - 207L - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: circa 80mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 113m.
Lunghezza totale: circa 190mm.
Spessore da chiuso: circa 17mm.
Bilanciatura: -
Peso: circa 46g.
Chiusura: -
Clip: -
Fodero: busta in pelle
Confezione: -
Note: -3902 -
Citadel - Fidel Liner Bufalo - 207M - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 78mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 107mm.
Lunghezza totale: circa 188mm.
Spessore da chiuso: circa 15mm.
Bilanciatura: -
Peso: circa 128g.
Chiusura: liner lock
Clip: -
Fodero: in pelle
Confezione: -
Note: -3956 -
Citadel - Folding Kukri Bufalo - 206 - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: -
Note: -3954 -
Citadel - Folding Kukri Legno - 206L - coltello artigianale
Destinazione d'uso: sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: legno
Lunghezza lama: 115mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 250mm.
Spessore da chiuso: 23mm.
Bilanciatura: -
Peso: 250g.
Chiusura: Liner Lock
Clip: -
Fodero: -
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3961 -
Citadel - Giaponino Bufalo - 208 - coltello artigianale
ATTENZIONE: i dati tecnici del coltello sono approssimativi e variano da coltello a coltello trattandosi di prodotti artigianali.
Destinazione d'uso: collezione/sportivo
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: circa 58mm.
Spessore lama: circa 3mm.
Lunghezza chiuso: circa 87mm.
Lunghezza totale: circa 147mm.
Spessore da chiuso: circa 14mm.
Bilanciatura: -
Peso: circa 104g.
Chiusura: liner lock
Clip: -
Fodero: in cordura
Confezione: -
Note: -3957 -
Citadel - Japanese Aikuchi - Special Salamander - Handmade knife
Type of production: Artisan
Country of production: Cambodia
Steel: carbon DNH7, hand forged, with hardened clay tempered at 60 / 40HRC
Habaki: copper
Tsuka: samekawa (ray skin)
Saya: Lacquered wood and water buffalo horn
Blade length: 122mm. (including habaki)
Total length: 222mm.
Weight: 110g. without sayaNote: Since these are handmade items and differ slightly in finishes from one another, the knife you ordered may not be identical to the one shown in the images.
CI-ASAL -
Citadel - Japanese Aikuchi No.1 Small - 502S - custom knife
These craftsmanships are distinguished by their classical lineage and their functional quality, which blends well with traditional production techniques and materials used. The blades are hardened to a hardness of about 40 HRC, after which they have been hammered by hand, the back and sides are clad with clay and the thread is retreaded to 60 HRC for excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.
Blade: high-carbon DNH7 steel with selective clay 40 / 60HRC clay and high degree of mirror polishing.
Hamon: Gunome style
Bo-Hi: absent
Total Length: 23.3cm.
Blade length: 11.8cm.
Blade thickness: 3.5mm.
Balance: on guard
Length Grip: 8.5cm.
Weight: 136g.
Saya: black lacquered wood with buffalo horn finishes
Tsuka-ito: Black cotton on the same (white skin) white
Sageo: absent
Fuchi and Kashira: in buffalo horn
Menuki: bronze
Habakia: Copper
Notes: Sold with silk sheath and cordura carrying case.3951 -
Citadel - Nordic 2003 - 282 - coltello artigianale
Citadel - Nordic '03
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Bruit de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
manicatura: In legno Bois de Rose
Lunghezza lama: 95 mm.
Lunghezza impugnatura: 120 mm.
Spessore della lama: 4 mm.
Lunghezza totale: 210 mm.
Fodero: Cuoio marrone lavorato a mano
Peso: 125 g.
Nota: l'immagine è a puro scopo esemplicativo in quanto ogni coltello, essendo artigianale, risulta essere unico e diverso dal precedente.3922 -
Citadel - Skinner Baltic 3 - 563 - coltello artigianale
Destinazione d'uso: caccia
Tipo di produzione: Artigianale
Produzione Lama: Cambogia
Lama: in acciaio al carbonio DNH7 a tempra selettiva 40/60HRC
Trattamento Lama: -
Manicatura: Corno di Bufalo D'acqua
Lunghezza lama: 103mm.
Spessore lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 228mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 2cm.
Peso: 208g.
Chiusura: -
Clip: -
Fodero: Cuoio Marrone
Confezione: astuccio di cordura con chiusura zip e ricamo con logo Citadel
Note: -3952 -
Citadel - Tanto Luxe Inciso - 130 - craft knife
These artisanal products stand out for their classic line and their functional quality, which is well matched to the traditional manufacturing techniques and the materials used.
The blades are in fact carbon-hardened to a hardness of around 40 HRC after which, after being hammered by hand, the back and sides are covered with clay and the wire is tempered at 60 HRC to have excellent cutting, penetration and flexibility . The blade is then polished and sharpened by hand on stone and the knife is finished in every single detail.Blade: in DHN7 steel with high carbon content with selective clay / 40 / 60HRC tempering and high degree of polishing.
Hamon: Gunome style
Bo-Hi: absent
Total length: 38.5cm.
Blade length: 23.3cm.
Blade thickness: 6.5mm. / 3mm.
Balancing: Advanced 2.5cm from Tsuba
Handle Length: 9.5cm.
Tanto weight: 372g.
Weight with Saya: 488g.
Saya: black lacquered wood, drowned gold leaves and buffalo horn finishes
Tsuka-ito: beige cotton on the same white (breed leather)
Sageo: absent
Tsuba, Fuchi and Kashira: in burnished and finely engraved metal
Menuki, seppa, shitodome: bronze
Habaki: copper
Notes: The Tanto is sold with a silk sheath and carrying case cordura.Small technical glossary: Hamon: hardening line on the blade * Hi: deep groove in the blade, also called bloodsucker * Saya: sword sheath * Tsuka-Ito or Tsuka-gawa: cotton, silk or leather braid wrapping the handle * Tsuba: guard * Drones: ornament between guard and handle * Kashira: ornament at the end of the handle * Menuki: medallions placed under the cordage of the handle * Habaki: collar that wraps the beginning of the blade * Seppa: seals of the guard * Shitodome: seals to which is tied the Sageo * Sori: curvature of the blade
CI-TA-B -
Citadel - Toucan - 150 - coltello artigianale
Citadel - Toucan
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Brut de forge" a tempra selettiva 40/60 HRC con dorso lavorato a lima
Manicatura: legno di palissandro
Lunghezza lama: 110 mm.
Spessore della lama: 5 mm.
Lunghezza totale: 230 mm.
Peso: 300 g.
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3918 -
Citadel - Vermicellus - 330 - coltello artigianale
Citadel - Vermicellus
Questi coltelli artigianali si distinguono per la loro linea originale, ma funzionale, che ben si accoppia alletradizionali tecniche realizzative ed ai materiali impiegati.
Le lame vengono infatti temprate a carbone fino adavere una durezza di circa 40 HRC dopodichè, dopo essere state martellate a mano, dorso e lati vengono rivestiti di argilla ed il filo è ritemprato a 60 HRC per avere ottime capacità di taglio, penetrazione e flessibilità. Il coltello viene poi lucidato ed affilato a mano su pietra e rifinito in ogni singolo dettaglio.
Lama: Acciaio DNH7 "Brut de forge" a tempra selettiva 40/60 HRC
Manicatura: legno di rosa
Lunghezza lama: 120 mm.
Spessore della lama: 5 mm.
Lunghezza totale: 220 mm.
Peso: 160 g.
Fodero: marrone, in cuoio, realizzato a mano
Nota: Essendo coltelli artigianali, e differendo leggermente per finiture l'uno dall'altro, il coltello da voi ordinato potrebbe non essere identico a quello rappresentato nelle immagini.3917