Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Ontario Knife Company - Spec Plus SP-2 Survival Knife - 8680 - knife
Intended Use: Survival / Tactical / Military
Production Type: Industrial
Country of Production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder coating
Handle: kraton
Blade length: 140mm.
Blade thickness: 4.5mm.
Total length: 269mm.
Balancing: advanced
Weight: 255g.
Scabbard: Belt, nylon, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8680 -
Kasumi Japan - Sharpening stone - Grain 240/1000 - 80001 - knives accessories
The Kasumi 80001 combination whetstone with rough (240) and medium (1000) grit.
If your knife edge is in poor condition, start sharpening with the rough # 240 grit of the whetstone.
If your knife is in average condition, start with the # 1000 medium grit of the whetstone.
These two grits will keep your knives sharp enough for normal home use.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80001 -
Ontario Knife Company - Bird and Trout Knife with leather sheath - 7027 - knife
Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for working birds and fish. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting / Cooking
Type of production: industrial
Country of production: USA
Blade: 57-59 HRC stainless steel
Blade treatment: satin finish
Handle: wood
Blade length: 85mm.
Blade thickness: 2mm.
Total length: 170mm.
Sheath: in leather
Packaging: Ontario official box
Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.
ON7027 -
Ontario Knife Company - 417 Filet Knife with leather sheath - 1275 - knife
Revisiting a classic Ontario model, this Old Hickory fish fillet knife comes with a leather sheath. Ideal for hunting, fishing or cooking, the Ontario Old Hickory 417 Filet Knife features a 16cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting / Cooking
Type of production: Industrial
Country of production: USA
Blade: 55-58 HRC stainless steel
Blade treatment: satin finish
Handle: wood
Blade length: 160mm.
Blade thickness: 2mm.
Total length: 275mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.
ON1275 -
Ontario Knife Company - Old Hickory Hop Field Knife - 5060 - knife
Produced by the American Ontario, this knife contains a series of elements that make it practical, manageable, simple, spartan and fascinating. The Hop field is a universal knife, convenient in the kitchen, perfect for a barbecue, valid for hiking or camping.
Intended use: Hiking / Camp / Meat
Type of production: Industrial
Country of production: USA
Blade: 1095 Carbon Steel 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 178mm.
Blade thickness: 2mm.
Total length: 300mm.
Weight: 134g.
Sheath: without sheath
Packaging: -
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade.ON5060 -
Ontario Knife Company - Bob Dozier Arrow Folder - 9100 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Stonewashed
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: through thumbstood, from right-handed
Washers: teflon
Closure: liner lock
Clip: stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierON9100 -
Ontario Knife Company - Bushcraft Woodsman - 8697 - knife
Intended use: Hiking / Hunting
Type of production: Industrial
Country of production: USA
Blade: full tang in 420 stainless steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 240mm.
Blade thickness: 5.8mm.
Total length: 375mm.
Balancing: slightly advanced
Weight: 506g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8697 -
Ontario Knife Company - Hunt Plus Skinner - 9716 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9716 -
Herold Solingen - Stropping paste - Medium Grain - stropping
Paste for high quality strop, which is essential for the maintenance of freehand razors. It can also be used for knives and gouges.
Grain: medium.
Ingredients: vegetable oils and fats, dye, abrasive elements.
Content: 5 ml.
11107€5.74Only 6 left -
Herold Solingen - Stropping paste - Fine Grain - stropping
Pasta for high quality strop, which is essential for the maintenance of freehand razors. It can also be used for knives and gouges.
Grain: fine.
Ingredients: vegetable oils and fats, dye, abrasive elements.
Content: 5 ml.
11106€5.33Only 5 left -
Ontario Knife Company - RAT 7 Micarta - knife
Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: Micarta
Blade length: 179mm.
Blade thickness: 5mm.
Overall length: 311mm.
Balance: on guard branch
Weight: 357g.
Sheath: Nylon, with rigid internal
Packaging: cardboard box with Ontatio Knife Company logosON8668 -
Ontario Knife Company - RAT 3 Micarta - knife
Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: micarta
Blade length: 95mm.
Blade thickness: 4.5mm.
Overall length: 270mm.
Balance: on guard branch
Weight: 147g.
Sheath: ABS, coupling with Tek-Lok type or clip system
Packaging: cardboard box with Ontatio Knife Company logosON8665 -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Herold Solingen - 195-J - Leather Strop - Straight Razor
The Herold Solingen 195-J is a leather strop for sharpening straight razors, ideal for professional barbers and traditional shaving enthusiasts. This tool is made with high-quality materials, including Russian buffalo leather, which guarantees precise and delicate sharpening of the razor. The strop has a long and smooth surface that allows the blade to be sharpened evenly without damaging or scratching it. Thanks to its ergonomic design and easy handling, the Herold Solingen 195-J is perfect for daily use and for keeping your straight razor always sharp.
Handle: Synthetic Leather
Strop: First-Class Leather
Strop Length: 38.5cm
Total Length: 57cm
HS-183J€63.93Only 2 left -
Ontario / Utilitac II - JPT-3S Drop by Joe Pardue - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: NO
* Marks on handle: NO
* Box: -
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryIntended use: Sports / EDC
Type of production: Industrial
Blade production: Taiwan
Blade: AUS-8 58HRC stainless steel
Blade Treatment: -
Handle: Zytel
Blade length: 85mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 205mm.
Closed thickness: 14mm.
Balancing: -
Weight: 152g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: -
Notes: Design by Joe PardueAP-2798 -
Ontario Knife Company - RAT 3 Skinner Micarta - 8661 - knife
Intended use: tactical/sporting
Type of production: Industrial
Country of manufacture: USA
Blade: Fulltang, 1095 black textured powder coated steel
Handle: Micarta
Blade length: 95mm.
Blade thickness: 3.5mm.
Total length: 197mm.
Balance: advanced
Weight: 200g.
Sheath: leather, for vertical carrying on belt
Packaging: cardboard box with Ontatio Knife Company logos.ON8661 -
Ontario Knife Company - Hiking Knife - 8187 - bushcraft knife
Intended Use: Utility / Bushcrat / Hunting
Production type: Industrial
Country of Production: USA
Blade: 420HC stainless steel full tang
Blade treatment: Satin finish
Handle: Micarta Mossy Oak
Blade length: 86mm.
Blade thickness: 3.5mm.
Total length: 210mm.
Balance: on the guard branch
Weight: 148g.
Scabbard: Belt, leather, for vertical carrying.
Packaging: Cardboard box with OKC logos
Notes: -ON8187 -
Ontario Knife Company - Spec Plus SP-1 Combat Knife - 8679 - tactical knife
Intended Use: Tactical / Military
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1075 carbon steel
Blade treatment: powder coating
Handle: kraton
Blade length: 178mm.
Blade thickness: 4.5mm.
Total length: 308mm.
Balancing: advanced
Weight: 286g.
Scabbard: Belt, nylon, for vertical carrying.
Package: Cardboard box with OKC logos
Notes: -ON8679 -
Ontario Knife Company - MOD Mark 3 Navy Dive Knife - 6141 - knife
Intended Use: Multirole / Tactical
Production type: Industrial
Country of Production: USA
Blade: hidden tang in 1095 carbon steel
Blade treatment: Phosphated
Handle: Thermoplastic, with steel tang and guard
Blade length: 152mm.
Blade thickness: 4mm.
Total length: 282mm.
Balance: backward
Weight: 294g.
Scabbard: thermoplastic, with steel inner lock and Cordura back loop.
Package: Cardboard box with OKC logos
Notes: Knife produced and used for many decades by the U.S. naval forces.ON6141 -
Ontario Knife Company - Spec Plus SP-6 Fighting Knife - 8682 - tactical knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 323g.
Sheath: belt, in cordura and leather, vertical carry
Packaging: Cardboard box with OKC logos
Note: -ON8682 -
Kasumi Japan - Sharpening stone - Grain 3000/8000 - 80002 - knives accessories
Kasumi 80002 combination sharpening stone with fine (3000) and superfine (8000) grit. Excellent for giving your knives a razor sharpening.
The # 8000 grit was developed specifically for knives and knives made of special steels.
# 8000 grit is nearly the same grain and quality as a natural whetstone used to sharpen Japanese samurai swords.
With the right technique and experience, the # 3000 / # 8000 whetstone combination will give your knives a beautiful mirror edge, just like the edge of a samurai sword.
The whetstone comes with a hard rubber base for use when sharpening.
There is also a small abrasive stone to be used to grind the surface of the stone.
Dimensions:
length 175 x width 60 x height 25 mm - Weight: 635g.
Quality level: very highKJ80002 -
Ontario Knife Company - SP53 Bolo Knife - 8689 - knife
Designed by Dan Maragni, the Ontario SP53 Bolo Knife features a 25cm bolo-style blade made of 5160 steel with an epoxy powder coating. The Bolo SP53 knife comes complete with a MOLLE compatible black tactical sheath and is made in the USA.
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 Carbon Steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 257mm.
Blade thickness: 6.4mm.
Total length: 384mm.
Balancing: advanced
Weight: 940g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8689 -
Ontario Knife Company - TAK 2 knife - leather sheath - 8664 - knife
The TAK 2 is a fixed blade knife ideal for hunting, camping, survival and many other outdoor applications. The TAK 2 knife features a high carbon steel blade and a stabilized hardwood handle.
Intended use: Tactical / MilitaryType of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 116mm.
Blade thickness: 4.8mm.
Total length: 250mm.
Balance: 4cm back
Weight: 275 g.
Sheath: in leather
Packaging: Cardboard box with OKC logos
Note:ON8664 -
Ontario Knife Company - SP24 USN-1 Survival Knife - 8688 - knife
The SP24 USN-1 survival knife is one of Ontario Knife Company's Spec Plus series models. Designed for military use but practical enough as a survival knife, camping knife or even hunting knife. In addition to the serrations on both sides, there is also a rope cutter on the blade of the knife. As with all Spec Plus, the SP24 USN-1 survival knife is made in the United States.
Intended use: Tactical / MilitaryType of production: Industrial
Country of production: USA
Blade: 1075 carbon steel hidden tang
Blade treatment: Powder Coat
Handle: in kraton, with steel tang
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 245mm.
Balancing: 3cm back
Weight: 225g.
Sheath: nylon, modular, compatible with M.O.L.L.E.
Packaging: Cardboard box with OKC logos
Note:ON8688 -
Ontario Knife Company - Spec Plus SP5 Bowie Survival - 8681 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 250mm.
Blade thickness: 6mm.
Total length: 380mm.
Balancing: advanced
Weight: 425g.
Sheath: nylon, M.O.L.L.E.compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8681 -
Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Ontario Knife Company - Old Hickory Butcher Knife - 7113 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years.Intended use: Hiking / Camp / Meat / Barbecue
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 360mm.
Blade thickness: 2.5mm.
Total length: 500mm.
Weight: 412g.
Sheath: without sheath
Packaging: without packaging
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: This product uses a NON stainless steel with a high carbon content - it is therefore recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper. To avoid the formation of rust and oxidation it is also highly recommended, after having dried it well, to protect the blade with a lubricant (eg grease, paraffin, lanolin, vaseline) that creates a protective barrier between the steel and the atmosphere.
ON7113 -
Ontario Knife Company - Hunting Knife with leather sheath - 7026 - knife
Known for their robust longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. In line with the Old Hickory design, this hunting knife features a 1095 carbon steel blade and wooden handle, making it perfect for hunting and outdoor use. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting
Type of production: industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 140mm.
Blade thickness: 2mm.
Total length: 260mm.
Sheath: in leather
Packaging: Ontario official box
Note: To make the knife sharper, through our in-house laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and dry it immediately manually with a clean cotton cloth or absorbent paper.
ON7026 -
Ontario Knife Company - Fish and Small Game Knife with leather sheath - 7024 - knife
Known for their rugged longevity in countless practical applications, Ontario's famous Old Hickory knives have been a go-to for cooking and outdoor enthusiasts for over 95 years. This model, thanks to its small size and ease of use, is ideal for processing fish and small game animals. It features an 8.5cm stainless steel blade with a satin finish. As with all Old Hickory models, this knife also features a wooden handle with brass rivets. Both the fillet knife and the leather sheath are made in the USA.
Intended use: Fishing / Hunting
Type of production: Industrial
Country of production: USA
Blade: carbon steel 1095 57-59 HRC
Blade treatment: satin finish
Handle: wood
Blade length: 100mm.
Blade thickness: 2mm.
Total length: 220mm.
Sheath: in leather
Packaging: Ontario official box
Notes: To make the knife sharper, through our internal laboratory, we further sharpen each blade before shipping.CARE AND MAINTENANCE: it is recommended to wash it under running water and immediately dry it manually with a clean cotton cloth or absorbent paper.
ON7024 -
Ontario Knife Company - Journeyman knife 6155 - tactical knife
Made from the very famous 499 Pilot's Survival Knife (Air Force Survival Knife), the OKC Journeyman Knife is ideal for outdoor activities. The OKC Journeyman knife features a sturdy 10cm blade with a sawn back, made from 1095 high carbon steel with a black phosphated finish. The Ontario Journeyman Knife comes with a leather sheath and is entirely made in the USA.
Intended use: tactical / sports
Type of production: Industrial
Country of production: USA
Blade: 1095 black texture powder coated steel
Handle: leather discs
Blade length: 10mm.
Blade thickness: 4.5mm.
Total length: 217mm.
Balancing: 2 cm back from the guard branch
Weight: 252g.
Sheath: in leather
Packaging: cardboard box with Ontatio Knife Company logosON6155 -
Ontario Knife Company - Bob Dozier Black Arrow Folder knife - 9101 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: in tool steel D2
Blade treatment: Black
Handle: G10
Blade length: 92mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 207mm.
Thick when closed: 11.7mm.
Weight: 85g.
Opening: by thumbstood, by right-handed
Washers: teflon
Closure: liner lock
Clip: in stainless steel, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Bob DozierO9101 -
Ontario Knife Company - Wyvern Crash Axe - 8693 - Axe
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Cutting length: 140mm.
Blade thickness: 6.5mm.
Total length: 480mm.
Balancing: advanced
Weight: 1130g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: transparent thermoplastic bag
Note: -ON8693 -
Ontario Knife Company - Cerberus Titanium Folder - 1776 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Satin
Handle: Titanium
Blade length: 105mm.
Blade thickness: 3mm.
Closed length: 140mm.
Total length: 235mm.
Thick when closed: 13.8mm.
Weight: 172g.
Opening: through thumbstood, ambidextrous
Washers: in Teflon
Closure: Frame Lock with stainless steel leaf
Clip: stainless steel, deep pocket type, reversible and removable
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON1776 -
Ontario Knife Company - Carter 2Quared Titanium Flipper - 8876 - knife
Intended use: Sportsman / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: in steel tool D2
Blade treatment: Blackwashed
Handle: Titanium
Blade length: 90mm.
Blade thickness: 5mm.
Length closed: 123mm.
Total length: 213mm.
Thick when closed: 14.5mm.
Weight: 176g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Frame Lock with stainless steel leaf
Clip: titanium, machined from solid, removable
Packaging: Cardboard box with Ontario Knife Company logos
Notes: Design by Robert CarterON8876 -
Ontario Knife Company - Bushcraft Utility Knife - 8698 - knife
Intended use: Hiking / Hunting
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: satin finish
Handle: walnut wood
Blade length: 103mm.
Blade thickness: 3mm.
Total length: 235mm.
Balancing: set back
Weight: 176g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8698 -
Ontario Knife Company - Hunt Plus Drop Point - 9715 - knife
Intended use: Hunting / Hiking
Type of production: Industrial
Country of production: USA
Blade: full tang in 440B stainless steel
Blade treatment: satin finish
Handle: in kraton
Blade length: 110mm.
Blade thickness: 4.7mm.
Total length: 230mm.
Balancing: slightly advanced
Weight: 160g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9715 -
Ontario Knife Company - EOD Karambit Ranger Micarta - 8672 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 90mm.
Blade thickness: 6.3mm.
Total length: 190mm.
Balancing: set back
Weight: 244g.
Sheath: nylon, belt, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8672 -
Ontario Knife Company - RD Tanto Ranger Micarta - 8677 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 175mm.
Blade thickness: 6.3mm.
Total length: 305mm.
Balancing: slightly advanced
Weight: 522g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8677 -
Ontario Knife Company - TFI Ranger Micarta - 8678 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 5160 carbon steel
Blade treatment: powder coating
Handle: micarta
Blade length: 135mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Balancing: slightly set back
Weight: 334g.
Sheath: nylon, M.O.L.L.E compatible, rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8678 -
Ontario Knife Company - Spec Plus Alpha Survival - 9710 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: phosphated
Handle: in kraton
Blade length: 135mm.
Blade thickness: 4.7mm.
Total length: 260mm.
Balancing: slightly advanced
Weight: 184g.
Sheath: nylon, belt, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON9710 -
Ontario Knife Company - FF6 Freedom Fighter - 8106 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: epoxy powders
Handle: in kraton, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5mm.
Total length: 330mm.
Balancing: on the guard branch
Weight: 368g.
Sheath: belt, in cordura and leather, vertical port
Packaging: Cardboard box with OKC logos
Note: -ON8106 -
Ontario Knife Company - SP10 Raider Bowie - 8684 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton with steel guard
Blade length: 245mm.
Blade thickness: 6.8mm.
Total length: 380mm.
Balancing: advanced
Weight: 620g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with OKC logos
Note: -ON8684 -
Ontario Knife Company - ASEK Survival System Foliage Green - 1410 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1410 -
Ontario Knife Company - ASEK Survival System - 1400 - knife
ASEK KNIFE
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in kraton, with tang and steel guard
Blade length: 127mm.
Blade thickness: 4.8mm.
Total length: 270mm.
Balancing: set back
Weight: 266g.
Sheath: nylon, modular, M.O.L.L.E compatible, with polypropylene interior and special compartment for the ASK Tool
Packaging: Cardboard box with OKC logos
Note: The survival system consists of a knife and an Asek Rescue Tool emergency toolASEK RESCUE TOOL
Blades: 420j2B stainless steel, HRC 54-56 hardness
Handle: aluminum
Total length: 170 mm
Notes: also equipped with a screwdriver / prybar and ceramic sharpenerON1400 -
Ontario Knife Company - SP8 Survival Machete - 8683 - knife
Intended use: Hard Utility / Survival
Type of production: Industrial
Country of production: USA
Blade: full tang in 1095 carbon steel
Blade treatment: epoxy powders
Handle: in kraton
Blade length: 255mm.
Blade thickness: 6.5mm.
Total length: 385mm.
Balancing: advanced
Weight: 642g.
Sheath: nylon, M.O.L.L.E compatible, with rigid polypropylene insert
Packaging: Cardboard box with Ontario Knife Company logos
Note: -ON8683 -
Ontario Knife Company - Chimera Plain Edge - 6517 - knife
Intended use: Tactical / Military
Type of production: Industrial
Country of production: USA
Blade: 1095 carbon steel hidden tang
Blade treatment: Phosphated
Handle: in rubber, with tang and steel guard
Blade length: 200mm.
Blade thickness: 5.2mm.
Total length: 345mm.
Balancing: set back
Weight: 424g.
Sheath: in polypropylene, modular, compatible with M.O.L.L.E., with integrated ceramic sharpener
Packaging: Cardboard box with OKC logos
Note: -ON6517 -
Herold Solingen - Strop Leather Double Grane - stropping kit
High quality strop for maintenance of razors, knives and gouges.
On the side is the Classic Leather (20 x 4 cm, thickness 2.5 mm) and on the darker a bit more raw leather (20 x 4 cm, thickness 2.5 mm) to use when using the classic one is no longer enough .
The strop is not adjustable, but thanks to the spaces inside the wooden structure and the red felt inserts are ensured flexibility ..
Dimensions (including handle) 31.5 x 3 x 4 cm, 120 gr weight.
11102€42.62Only 0 leftOut of stock -
Herold Solingen - Strop Leather and Stone - strop
High quality strop for maintenance of razors, knives and gouges.
On one side there is covered by Russian Leather (20 x 4 cm, thickness 3 mm) and on the other there's a natural stone fine grain (20 x 4 cm, 5 mm thick).
The strop is not adjustable, but the spaces inside the wooden structure allow a slight decline of the leather side.
Dimensions (including handle) 31.5 x 2 x 4 cm, weight 208 grams.
11101€50.82Out of stock -
Ontario Knife Company - RAT 5 Micarta - knife
Intended use: tactical / sport
Type of production: Industrial
Country of Origin: USA
Blade: full tang, steel 1095 black texture powder coated
Handle: Micarta
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Balance: on guard branch
Weight: 326g.
Sheath: Nylon, with rigid internal
Packaging: cardboard box with Ontatio Knife Company logosON8667 -
Herold - Strop Belt
Strop belt Extra Large, to straight razor, the German Dovo. Historical company of Solingen, specialized in the manufacture of cutting tools of high and very high quality.
Handle: leather
Strop: high-grade leather (leather back)
Strop Length: 39cm useful (7,8cm height - 3 mm thick)
Overall Length: 57.5 cm (hooks included)coramella-cinghia€54.92Only 0 leftOut of stock -
Cesare Tonelli - Engraved Buffalo Bone Integral Drop Point - custom knife
Blade: 59HRC 440C Stainless Steel
Handle: Buffalo Bone and 416 Stainless Steel
Blade Length: 96mm.
Blade Thickness: 5mm.
Overall Length: 209mm.
Weight: 206g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather and Ostrich
Notes: Engraved by Luca Bertella and Fully handmaded in Italy by CIC Master Cesare Tonelli10153€490.98Out of stock -
Cesare Tonelli - Stag Horn Integral Clip Point - custom knife
Blade: 58HRC 440C Stainless Steel
Handle: Stag Horn and 416 Stainless Steel
Blade Length: 89mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 180g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather and Ostrich
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10152€400.82Out of stock -
Cesare Tonelli - RWL Steak Knife Loveless Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Loveless Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with ostrich inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10151€204.10Out of stock -
Cesare Tonelli - RWL Steak Knife Black Micarta - custom knife
Intended use: Collection / Steak / Sports
Production Type: Handmade
Production Blade: Italy
Blade: Stainless steel RWL34 to 60HRC
Treatment Blade: Mirror Polishing
Handle material: Black Canvas Micarta with 416 stainless steel guard and passing
Blade length: 98mm.
Blade thickness: 4mm.
Total length: 212mm.
Weight: 62g.
Sheath: handmade and hand-sewn, leather with python inserts
Notes: Handmaded by Cesare Tonelli, Maestro Coltellinanio CIC (Italian Knives Corporation)10150€204.10Out of stock -
Cesare Tonelli - Clip Point Integral - custom knife
Blade: 58HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 87mm.
Blade Thickness: 5mm.
Overall Length: 199mm.
Weight: 172g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10095€368.03Out of stock -
Cesare Tonelli - RWL Drop Point Integral - custom knife
Blade: 60HRC RWL34 Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10094€409.02Out of stock -
Cesare Tonelli - Drop Point Integral - custom knife
Blade: 59HRC 440C Stainless Steel
Handle: Loveless Micarta
Blade Length: 98mm.
Blade Thickness: 5mm.
Overall Length: 207mm.
Weight: 168g.
Lock: -
Clip: -
Sheath: Handmaded, Brown Leather
Notes: Fully handmaded in Italy by CIC Master Cesare Tonelli10093€368.03Out of stock -
Ontario - Army P3 Quartermaster - coltello
Destinazione d'uso: Tattico / Collezione
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: In acciaio inox 440A
Trattamento Lama: -
Manicatura: Anelli di cuoio
Lunghezza lama: 150mm.
Spessore lama: 4.5mm.
Lunghezza totale: 270mm.
Bilanciatura: -
Peso: 264g.
Fodero: Cuoio Marrone
Confezione: scatola in cartone con loghi Ontario
Note: -2593 -
Ontario - P4 USMC Combat knife -
Ontario - P4 USMC Combat knife -
Intended Use: Tactical / Collection
Type of production: Industrial
Production Lama USA
Blade: 440A stainless steel
Treatment Lama: -
Handle material: leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Total length: 310mm.
Balance: -
Weight: 290g.
Sheath: Leather Brown
Packaging: cardboard box with logos Ontario
Notes: -2799 -
Ontario / Utilitac II - JPT-4R Tanto by Joe Pardue - coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: -
Manicatura: Zytel
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 158g.
Chiusura: Liner Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Utilitac II
Note: Design by Joe Pardue2797 -
Ontario Knife Company - 498 Marine Combat knife - knife
This knife is used exclusively by the United States Marine Corps and has been manufactured by the Ontario Knife Company for many years now.
Intended use: military / collection
Type of production: Industrial
Production Lama: America
Blade: 1095C carbon steel
Blade treatment: Phosphates
Handle: Painted leather rings
Blade length: 180mm.
Blade thickness: 4mm.
Closed Length: -
Total length: 305mm.
Thick when closed: -
Balance: set back, at 1cm.
Weight: 284g.
Closing: -
Clip: -
Sheath: Black Leather
Packaging: transparent plastic bag
Note: -ON498 -
Ontario Knife Company - 499 Air Force Survival Pilot knife - knife
The Ontario Knife 6150, 499 Air Force Survival Knife, a classic among military blades, is still used today by the US military.
Made in the USA
Blade: 1095 carbon steel covered with epoxy powders
Handle: leather discs
Blade length: 127 mm.
Blade thickness: 4 mm.
Total length: 245 mm.
Weight: 250 g.
Sheath: Cordura and leatherON6150 -
Ontario Knife Company - ASEK Rescue Strap Cutter Assembly - 1403 - multipurpose
Originally produced as an accessory to the ASEK survival knife series, this ASEK belt cutter is constructed of anodized aluminum. The ASEK Strap Cutter can also be considered a multi-tool thanks to the ceramic sharpener, the lanyard and the presence of a screwdriver. Click here for replacement blades for the ASEK Belt Cutter. The ASEK cutter blades are made in the USA.
Total length: 16.8 cm
Hardness: 55 HRC
Handle color black
Black blade color
Blade thickness: 0.064 cm
Blade material: 440 stainless steel
Blade length: 2.5 cmON1403 -
Ontario Knife Company - RTAK2 Survival knife - knife
Intended use: Outdoor
Type of production: Industrial
Lama production: USA
Blade: 5160 carbon steel
Blade treatment: Powder Coat
Handle: Micarta
Blade length: 265mm.
Blade thickness: 4.7mm.
Total length: 425mm.
Balancing: -
Weight: 622g.
Sheath: in Nylon with MOLLE attachments.
Packaging: cardboard box with Ontario Knife Company logos
Note:ON8669 -
Ontario Ranger - Shank - Black Canvas Micarta Knife
Ontario Ranger - Shank - Black Canvas Micarta Knife
Intended Use: Tactical / sports
Type of production: Industrial
Production Blade: America
Blade: 1095 steel with black texture powder coated
Handle material: Micarta
Blade length: 150mm.
Blade thickness: 3mm.
Total length: 260mm.
Balance: on the branch guard
Weight: 190g.
Sheath: Nylon
Package: plastic bag2533-9