Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Wildrock Gear - Strikeback Tomahawk Black - D2 steel - ax
Strikeback Tomahawk is designed to work in any condition. Built and designed for heavy use, the Strikeback, thanks to its simple and clean design, manages to perfectly combine balancing and maneuverability characteristics. The body is made of high quality D2 steel and is skeletonized to help reduce weight and improve structural rigidity and balance. The Gun-kote surface coating increases its wear resistance and protects against corrosion.
Intended use: Tactical / Allround
Type of production: industrial
Blade: Bohler D2 steel (56 Hrc)
Blade treatment: Gun-kote
Lama production: Italy
Handle: G-10 Black
Head length: 199mm.
Blade thickness: 8mm.
Blade length: 101mm.
Total length: 400mm.
Balancing: -
Weight: 1080g.
Closing: -
Clip: -
Sheath: Compatible soft Kydex sheath
Use: Cutting | Hammering | Digging | Breaking | SmashingWRK-TOM-B -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
DuStar - Model 1 Arad - Tactical Bowie - knife
The model Arad is the very first industrial knife designed, developed, manufactured, tested and perfected in Israel directly. Exploiting the CNC teconolgie and based on a timeless design such as the Randall Model 14, was designed by Alex Shamgar, Israel and produced by the renowned knifemaker ll'esperto Sherutay Erozia, since 1984 manufacturer of industrial castings lost wax molds.
Intended use: Tactical / Military
Type of production: Industrial
Production Blade: Israel
Blade: Stainless D2 56/57HRC
Treatment Blade: micropallinatura
Handle: FRN in (fiberglass reinforced nylon) with micarta spacers and brass guard
Blade length: 180mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 298mm.
Thick when closed: -
Balancing: advanced to 1cm. the branch of guard
Weight: 502G.
Closure: -
Clip: -
Sheath: Nylon, ABS with rigid insert
Packaging: Cardboard box with logos Dustar
Notes: Design by Alex Shamgar10843€311.48Out of stock -
A.T.C. - American Tomahawk Company - Emerson CQC-T
Destinazione d'uso: Militare/Tattico
Tipo di produzione: Industriale
Produzione Lama: U.S.A.
Lama: lega di acciaio 4140 ad alto tenore di carbonio a 54/55 HRC, lavorata a controllo numerico
Trattamento Lama: verniciatura epossidica
Manicatura: in Nylon rinforzato, spessore 25mm, con anelli di ritenzione
Lunghezza lama: 69x198mm.
Spessore lama: 5.4mm.
Lunghezza chiuso -
Lunghezza totale: 362mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 556g.
Chiusura: -
Clip: -
Fodero: in Nylon, con attacchi M.O.L.L.E. multiposizione e sganci rapidi di apertura
Confezione: -
Note: design by Ernest Emerson3740 -
A.T.C. - American Tomahawk Company - Fox Fighting Tomahawk - FX-ATC02
Destinazione d'uso: Tattico/Allround
Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58/60HRC
Trattamento Lama: Teflonatura Opaca Nera
Produzione Lama: Italia
Manicatura: G-10 OD Green
Lunghezza lama: 95mm.
Spessore della lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 360x220mm.
Bilanciatura: -
Peso: 810g.
Chiusura: -
Clip: -
Fodero: Cordura Verde 1100D
Note: Design by Sibert - Prodotto commissionato dall'americana Tomahawk Company, specializzata in questa tipologia di articoli - Adatta ad usi estremi - Adatta per il lancio.5747 -
A.T.C. - American Tomahawk Company - LaGana Tactical Tomahawk
Destinazione d'uso: militare/tattico
Tipo di produzione: industriale
Produzione Lama: america
Lama: in acciaio al carbonio 1060 52/54HRC
Trattamento Lama: verniciatura epossidica
Manicatura: ST (Super Tough) Nylon
Dimensioni lama: 60x205mm.
Lunghezza totale: 350mm.
Peso: 525g.
Chiusura: -
Clip: -
Fodero: in nylon, con attacchi M.O.L.L.E.
Note: Design by Peter LaGana2726