Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MKM - Yipper - Black Top Shield CPM-MagnaCut & Black G10 - YP-GBK - knife
"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Black Top Shield Coating
Handle: G10 with embedded stainless steel liners
Blade Length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben PetersenMK-YP-GBK -
MKM - Yipper Knife - SW CPM-MagnaCut & Blue G10 - YP-GBL - knife
"Have you ever met a Yipper? You know a little dog that barks like the king of the prairie, but actually weighs less than a hamburger? A fierce puppy whose barking is worse than its bite! Here-I grew up in an area where coyotes yelp and howl at night. Their call is a bit eerie, perhaps frightening, but they are like those barking puppies: much ado about nothing. So when Igor Bortolussi of MKM asked me to design a knife, I started to design a knife that was a yipper: sharp teeth, but compassed appearance. An EDC knife that despite its name does what it's supposed to do and does it damn well!" - Ben Petersen
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Stonewashed
Handle: G10 with embedded stainless steel liners
Blade length: 72mm.
Blade thickness: 2.5mm.
Length closed: 98mm.
Total length: 173mm.
Thickness when closed: 13mm.
Weight: 65g.
Closure: CrossBar Lock (AXIS Lock Modified)
Clip: stainless steel, deep pocket, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Ben PetersenMK-YP-GBL -
MKM - Pocket Tango 2 - SW CPM-MagnaCut & Green Micarta - MK PT02-GC - knife
"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: Micarta
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by David C. AndersenMK-PT02-GC -
MKM - Pocket Tango 2 - SW CPM-MagnaCut & Black G10 - MK PT02-GBK - knife
"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: G10
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by David C. AndersenMK-PT02-GBK -
MKM - Pocket Tango 1 - SW CPM-MagnaCut & Black G10 - MK PT01-GBK - knife
"I designed the Pocket Tango to be your everyday dance partner, a pocket knife with agility and grace and the skill to be at your side at all times. The two blade shapes complement each other and the handles are gorgeous and comfortable. With the MKM magnetic sheath to complete the package, I couldn't be happier!" - David C. Andersen
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Maniago - Italy
Blade: full tang in CPM-MagnaCut steel
Blade treatment: Stone washed
Handle: G10
Blade length: 74mm.
Total length: 170mm.
Blade thickness: 3mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by David C. AndersenMK-PT01-GBK -
MKM - Hero by Tommaso Rumici - SW M390 & Denim Micarta - MK-HR-DCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-DCT -
MKM - Vincent by Vox - SW CPM-MagnaCut & Denim Canvas Micarta - VCM-DC - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCM-DC -
MKM - Vincent by Vox - SW CPM-MagnaCut & Green Canvas Micarta - VCM-GC - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is CPM-MagnaCut hardened to 60/62HRC with stonewashed treatment and micarta handle to combine grip with aesthetics.
Intended Use: SportingType of production: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut steel
Blade treatment: Stonewashed
Handle: micarta, with embedded stainless steel liners and anodized titanium spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 104g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCM-GC -
Benchmade - Mini Adira - MagnaCut & Depth Blue Grivory - 18065 - folding knife
The Benchmade Mini Adira is a sturdy folding knife that is a must-have for every aquarist. Designed to excel in wet environments, this knife is perfect for tasks ranging from bait preparation to nicking fish
The Mini Adira features a drop point blade expertly crafted from CPM MagnaCut stainless steel, providing durability and superior corrosion resistance. The AXIS Lock mechanism is complemented by a colorful, high-visibility pin, making it functional and easily accessible.
Its design reflects Benchmade's commitment to supporting your outdoor lifestyle, both on and off the water. Whether you are an avid fisherman or an outdoor enthusiast, the Mini Adira is ready to become your pocket knife of choice.
Intended Use: Fishing / Diving / Boat / Outdoors
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Grivory
Blade Length: 81.5mm.
Blade thickness: 2.9mm.
Length when closed: 108mm.
Total length: 189mm.
Handle thickness: 16.8mm.
Weight: 87.6g.
Locking system: AXIS Lock
Clip: Removable and reversible, stainless steel with Black Oxide treatment
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024BM-18065 -
Benchmade - Adira - MagnaCut & Depth Blue Grivory - 18060 - pocket knife
For tackling your aquatic adventures, the Benchmade Adira is a sturdy folding knife that is a must-have for every aquarist. Designed to excel in wet environments, this knife is perfect for tasks ranging from bait preparation to fish processing.
The Adira features a drop point blade expertly crafted from CPM MagnaCut stainless steel, providing durability and superior corrosion resistance. The AXIS Lock mechanism is complemented by a colorful, high-visibility pin, making it functional and easily accessible.
Its design reflects Benchmade's commitment to supporting your outdoor lifestyle, both on and off the water. Whether you are an avid fisherman or an outdoor enthusiast, the Adira is ready to become your pocket knife of choice.
Intended Use: Fishing / Diving / Boat / OutdoorsType of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Grivory
Blade length: 98mm.
Blade thickness: 3mm.
Length when closed: 130mm.
Total length: 229mm.
Handle thickness: 16.8mm.
Weight: 120g.
Locking system: AXIS Lock
Clip: Removable and reversible, stainless steel with Black Oxide treatment
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024BM-18060 -
Benchmade - Undercurrent - MagnaCut Serrated & Santoprene - 18040S - sailing and diving knife
Benchmade's Undercurrent is a sturdy fixed blade designed to handle the rigors of marine use and withstand the corrosive properties of salt water. Made with a sheepfoot blade of high-quality CPM MagnaCut steel, the Undercurrent is capable of cutting fishing line, ropes and bait thanks to its partially serrated edge.
It comes with a Sonar Gray molded scabbard designed to be mounted versatile on your belt, backpack or boat. The sheath's push-button release provides quick and easy access to the knife.
Part of Benchmade's Water Class, the Undercurrent is a reliable companion for your boating and underwater trips.
Intended Use: Fishing / Diving / Boat / OutdoorProduction type: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade Length: 109mm.
Blade thickness: 3mm.
Total length: 239mm.
Weight: 152.50g.
Sheath: Plastic polymer, with push-button release
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024BM-18040S -
Benchmade - 9" Fishcrafter - MagnaCut & Santoprene - 18020 - filleting knife
Benchmade's Fishcrafter is an essential tool for anglers and outdoor enthusiasts. Designed for precision and ease of processing small to medium-sized fish, this filleting knife is a testament to Benchmade's commitment to quality.
The Fishcrafter features a razor-sharp SelectEdge blade expertly crafted from CPM MagnaCut steel. This particular steel provides the perfect balance of corrosion resistance and durability, making it ideal for the rigors of fishing. The thin blade profile, with a medium flex, allows for effective filleting, boning and cleaning. The knife comes with a molded Sonar Gray sheath designed with alternative mounting options and a small hole in the tip for drainage. Part of Benchmade's Water Class, the Fishcrafter is a reliable companion for your fishing adventures.
Intended Use: Fishing/OutdoorType of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade length: 230mm.
Blade thickness: 2.3mm.
Total length: 354mm.
Weight: 105g.
Sheath: Plastic polymer
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024BM-18020 -
Benchmade - 7" Fishcrafter - MagnaCut & Santoprene - 18010 - filleting knife
Benchmade's Fishcrafter is an essential tool for anglers and outdoor enthusiasts. Designed for precision and ease of processing small to medium-sized fish, this filleting knife is a testament to Benchmade's commitment to quality.
The Fishcrafter features a razor-sharp SelectEdge blade expertly crafted from CPM MagnaCut steel. This particular steel provides the perfect balance of corrosion resistance and durability, making it ideal for the rigors of fishing. The thin profile of the blade, with a medium flex, allows for effective filleting, boning and cleaning. The knife comes with a molded Sonar Gray sheath designed with alternative mounting options and a small hole in the tip for drainage. Part of Benchmade's Water Class, the Fishcrafter is a reliable companion for your fishing adventures.
Intended Use: Fishing/OutdoorType of production: Industrial
Country of manufacture: USA
Blade: CPM-Magnacut stainless steel
Blade Finish: Stonewashed
Handle: Santoprene
Blade Length: 178mm.
Blade thickness: 2.3mm.
Total length: 302mm.
Weight: 80.5g.
Sheath: Plastic polymer
Packaging: Box set with Water series logos by Benchmade
Notes: product is part of the new "Water Collection," launched on May 9, 2024BM-18010 -
Benchmade - Full Immunity Knife - Gold Class Edition 2024 - Damasteel - 290-241 - knife
With the introduction of the Immunity™ family, the 290-241 Full Immunity™ represents a new limited edition Gold Class variant, offering a unique build for the collector looking for a tactical yet compact knife for everyday use (EDC ).
For quick and compact utility, the 290-241 Full Immunity™ is easily deployed from a concealed position. This sub-compact folding knife is an injection of unique, ultra-premium materials, with a Wharncliffe-style Egir pattern Damasteel® blade, unidirectional carbon fiber handles with an understated black wood effect and brilliant Sapphire Blue accents.
The 290-241 Full Immunity™ is only available until December 31, 2024.
Intended use: Tactical
Type of production: Industrial
Country of production: USA
Blade: Damasteel steel
Blade finish: Etched
Handle: Unidirectional Carbon Fiber
Blade length: 63mm.
Blade thickness: 2.3mm.
Closed length: 87mm.
Total length: 150mm.
Closed thickness: 12.7mm.
Weight: 61g.
Closure: AXIS Lock
Clip: Sapphire Blue PVD - Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: "Gold Class" cardboard box with Benchmade logos
Notes: Limited edition and numbered on the bladeBM-290-241 -
Benchmade - Station Kitchen Knife - DLC CPM-154CM & G10 with Carbon Fiber - 4010BK-01 - field kitchen knife
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade finish: Black DLC
Handle: G10 Green and Carbon Fiber
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010BK-01 -
Benchmade - Station Kitchen Knife - CPM-154CM & Tan Richlite - 4010-02 - field kitchen tool
A minimalist workhorse: this ultra-versatile kitchen tool was built, designed and crafted to give you the best. From field to table, this unique knife combines the power and exceptional quality of Benchmade's proprietary SelectEdge technology for unparalleled cutting.
The wide CPM-154 blade extends to a precisely shaped handle that provides a comfortable grip for extended use. The knife comes with a plastic sheath that allows liquids to drain away from the knife thanks to drainage holes.
Intended Use: Universal household and field kitchen knife
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154CM 58/61HRC
Blade Finish: Stonewashed
Handle: Tan Richlite and Black G10
Blade length: 148mm.
Blade thickness: 2.5mm.
Total length: 273mm.
Weight: 179g.
Blade Cover: plastic material, with drainage holes
Packaging: Box made of cardboard and recycled materials, with Benchmade logos
Notes: designed to be used both in the home kitchen and on hikesBM-4010-02 -
Benchmade - Skirmish 630 Titanium - NOS FULL SET from a PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Collected from a private individual, previously purchased.
* Condition: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) condition.
* Commercially available: Discontinued since 2014
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present, with a few small signs of time.
* Sheath: Microfiber bag with Benchmade logos.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of Production: USA
Blade: made of CPM-S30V steel at 58-60HRC
Blade finish: satin-finished
Handle: anodized titanium
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 135mm.
Total length: 245mm.
Handle thickness: 12.5mm.
Weight: 189.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Full set, mint condition, brand new, never taken out of the box, in NOS (new old stock) conditionBM-630-CP -
Benchmade - 755 MPR Mini Pocket Rocket by Shane Sibert - PRIVATE COLLECTION - knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Like new
* Commercially available Discontinued since 2015
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and certified by our in-house laboratoryIntended Use: Sporting / Collection
Production Type: Industrial
Country of manufacture: USA
Blade: Bohler M390 60/62HRC stainless steel
Blade Finish: Stone Washed
Handle: G10 and Titanium
Blade length: 73.5mm
Blade thickness: 4.15mm.
Length closed: 96.5mm.
Total length: 175mm.
Thickness when closed: 15.5mm.
Weight: 156g.
Closure: Frame Lock
Clip: Titanium, machined from billet
Packaging: Cardboard box with Benchmade logos
Notes: Design by Shane SibertBM755-CP -
Benchmade - Narrows - DLC M390 & Black Titanium - 748BK-1 - pocket knife
Ultra-thin, incredibly lightweight and extremely durable, the 748BK-01 Narrows™ pushes the boundaries of EDC style and performance with a futuristic, minimalist design, high-quality materials and hi-tech engineering. The dark variant balances matte and glossy details with matte black DLC titanium grips mixed with a drop-point blade in glossy black M390 DLC. The 748BK-01 uses our AXIS® Torsion mechanism and thrust pads for extremely smooth blade activation. This precision EDC is beyond imagination.
Intended Use: Sporting / EDCProduction Type: Industrial
Country of manufacture: USA
Blade: M390 58/61HRC
Blade treatment: Dual Tone Black DLC
Handle: Titanium 6Al-4V
Blade Length: 87mm.
Blade thickness: 2.03mm.
Length closed: 117mm.
Total length: 203mm.
Thickness when closed: 7.1mm.
Weight: 68g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel with Sapphire Blue PVD treatment
Packaging: Cardboard box with Benchmade logos
Notes: -BM-748BK-01 -
Benchmade - Meatcrafter 4" - Dark Olive Santoprene Hybrid Hunting Knife - 15505 - knife
From field work to food preparation in the outdoor field kitchen, the 15505 Meatcrafter 4" derives from its full-size counterpart in terms of handle ergonomics and hybrid fixed blade profile, but offers a slightly smaller blade for even finer, more precise and detailed work.
The CPM-154 premium stainless steel blade with 14° SelectEdge is designed specifically for working with smaller animals such as game and poultry, with the perfect amount of blade for delicate cuts around the sternum.
With a Dark Olive Santoprene handle for a secure grip even in wet environments, the Meatcrafter 4" is a no-holds-barred cutting tool for the most experienced hunter.
Intended Use: Hunting / Meat KnifeType of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-154 58/61HRC
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 102mm.
Blade thickness: 2.3mm.
Total length: 225mm.
Weight: 76.8g.
Sheath: Two-tone boltaron (one side black, one side orange)
Packaging: cardboard box with Benchmade logos
Notes: smaller and more compact version of the Meatcrafter modeloBM-15505 -
Benchmade - Sibert Mini Bushcrafter - CPM-S30V & OD Green G10 - 165-1 - knife
Survival in the wilderness can depend on the tools you carry, and the 165-1 Mini Bushcrafter is a compact take on the classic outdoor bushcrafting knife, the most important tool in your kit.
With an 8.5cm. fixed blade made of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 165-1 Mini Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.
Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.
Intended Use: Utility / HikingType of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 85mm.
Blade thickness: 4.2mm.
Total length: 192mm.
Weight: 183g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane SibertBM-165-1 -
Benchmade - Sibert Bushcrafter - CPM-S30V & OD Green G10 - 163-1 - knife
Survival in the wilderness can depend on the tools you carry, and the 163-1 Bushcrafter is a reimagining of the classic outdoor bushcrafting knife, the most important tool in your kit.
With a fixed 11-cm. blade of premium CPM-S30V sintered stainless steel and an all-weather durable G10 OD Green handle with a highly visible red G10 spacer, the 163-1 Bushcrafter is purpose-built for all of the toughest outdoor tasks, including fire bait preparation, batoning, shelter construction, and food preparation.
Redesigned with updated blade geometry and handle ergonomics to the demands of modern users, it can be kept handy in the leather sheath to be worn on the belt, which also features a special recess for carrying a firestarter.
Intended Use: Utility / HikingType of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC sintered stainless steel
Blade finish: Stonewash
Handle: G10
Blade length: 111mm.
Blade thickness: 4.2mm.
Total length: 229mm.
Weight: 218g.
Sheath: leather, with belt loop for vertical carry
Packaging: cardboard box with Benchmade logos
Notes: Design by Shane SibertBM-163-1 -
MKM - Hero Knife by T. Rumici - Titanium and Carbon Fiber - PRIVATE COLLECTION - MK HR-CFT - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased.
* Condition: overall in good condition
* Commercially available
* Sharpening: factory sharpened
* Marks on blade: none
* Marks on handle: small marks on titanium head.
* Box: cardboard box with MKM Maniago Knife Makers logos.
* Scabbard: synthetic pouch with zipper closure and belt loop.
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: marbled carbon fiber grips, titanium liners and heads
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 170g.
Length when closed: 130mm.
Total length: 215mm.
Closure: Back Lock
Clip: titanium, removable, deep pocket type
Sheath: synthetic material pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-AP-HR-CFT -
Benchmade - 535SL-07 Mini Bugout - Crushed Silver Cerakote & Sage Green - knife
What began as an attempt to perfect the multi-purpose outdoor lock, has evolved into a practical solution for everyday tasks and chores: the 533SL-07 Mini Bugout is exactly the compact EDC built for everyday carry in style.
Lightweight, slim and sleek, yet incredibly rugged and durable for its size, the 533SL-07 Mini Bugout is a seasonal variant that immediately catches the eye, with an easy-care premium CPM-S30V steel blade, Cerakote Crushed Silver finish and Sage Green outdoor-inspired Grivory-colored grip, with gold-anodized backspacer and thumb stud for a distinctive Benchmade color touch.
Intended Use: Sporty / EDCProduction Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Crushed Silver Cerakote
Handle: Grivory
Blade length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533SL-07 -
Benchmade - Bugout 535-12 - Tan Grivory - Axis Lock Knife - knife
In the years since the 535 Bugout was launched, this slim, lightweight and durable folder has redefined EDC style and versatility, from the trail to the workplace and amidst all of life's adventures.
The 535-12 Bugout is an instant eye-catcher, made of easy-care premium CPM-S30V stainless steel with a stonewashed finish and powder-colored Grivory handle with backspacer and gold anodized thumb stud for a touch of color and class-the must-have tool in your outdoor kit.
Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC stainless steel
Blade finish: Stonewashed
Handle: Grivory
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-535-12 -
Benchmade - Meatcrafter - Dark Olive Santoprene - 15500-04 - knife
When your field adventures transition to the kitchen, the right cutting tool can make all the difference!
The new 15500 Meatcrafter™️ is a fixed hybrid hunting knife with a blade design ideal for cutting, boning or slicing your favorite cuts of meat. Featuring Benchmade's new SelectEdge™ technology, the 28° sharpening angle of the CPM-154 stainless steel blade provides the perfect balance of penetration, strength, edge retention and blade flexibility. Ideal to take with you on your hunting trips, but also a reliable companion in the kitchen or during the most demanding barbecues!
Intended Use: Hunting / Meat Knife
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-154 58/61HRC stainless steel
Blade finish: Stonewashed
Handle: Santoprene
Blade length: 154mm.
Blade thickness: 2.3mm.
Total length: 281mm.
Weight: 91.8g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15500-04 -
Benchmade - Freek - Satin S90V & Carbon Fiber - 560-03 - knife
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: USA
Blade: Stainless steel CPM-S90V (59-61 HRC)
Blade treatment: Satin finish
Handle: Carbon fiber with anodized aluminum spacers
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 123mm.
Total length: 215mm.
Weight: 116g.
Closure: Axis
Clip: stainless steel with PVD treatment, removable
Packaging: cardboard box with Benchmade logosBM-560-03 -
Benchmade - Bailout Knife Crater Blue Aluminum - CPM-M4 - Plain Tanto - 537FE-02 - knife
When you find yourself facing long distances, you need a knife that can do the same. Inspired and designed for tactical situations, the Bailout® pushes the concept of lightweight to the maximum. It boasts an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile, this slim pocket tool achieves an optimal balance between strength and weight, making it suitable for both heavy-duty use and daily carry. The novelty for 2023 is the eye-catching combination of the Crater Blue handle and the Flat Dark Earth blade, creating a striking contrast.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Crater Blue anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537FE-02 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Serrated Tanto - 537SGY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a serrated tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537SGY-03 -
Benchmade - Bailout Knife Black Aluminum - CPM-M4 - Plain Tanto - 537GY-03 - knife
When you find yourself facing challenging situations and need a knife that measures up, the Bailout® is what you need. Inspired and designed for tactical situations, this ultralight knife delivers maximum performance. It features an anodized aluminum handle with a diamond-texture and a CPM-M4 steel blade with a tanto profile. This slim pocket tool offers a perfect balance between strength and weight, making it suitable for both heavy-duty and everyday use. New for 2023 is a discreet design version with a tungsten gray Cerakote blade and a black handle.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cerakote®
Handle: Black anodized 6061-T6 aluminum
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 10.4mm
Weight: 70g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-537GY-03 -
MKM - Campo 7 - MagnaCut & Natural Micarta - CP07MAG-NC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Campo was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Scissors
* Phillips screwdriver
* Corkscrew
Intended Use: Hiking / Multipurpose
Production Type: Industrial
Country of Production: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 107g.
Closure: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-CP07MAG-NC -
MKM - Malga 6 - MagnaCut & Black Micarta - MP06MAG-BC - Multipurpose Knife
A story of evolution:
One day a handful of guys were thinking about how to improve their multipurpose knife, a classic knife made and thought of over a century ago, but without having to integrate or think of additional functions since all possible tools had already been invented or proposed.
So one of these guys said, "Why don't we simply improve the steel of the blade to provide better cutting and holding capabilities and not toughen the structure while still leaving it compact and familiar?" There Malga was born, with fabulous MagnaCut steel on the main blade!
Features:
* Blade
* Bottle opener
* Flat screwdriver
* Box opener
* Fork
* Reamer
* Corkscrew
Intended Use: Hiking / Multipurpose
Production type: Industrial
Country of manufacture: Italy
Blade: CPM-MagnaCut 61/63 HRC steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 67mm.
Blade thickness: 2.5mm.
Total length: 100mm.
Weight: 79g.
Locking system: SlipJoint
Clip: -
Sheath: -
Packaging: Cardboard box with MKM logos
Notes: -MK-MP06MAG-BC -
MKM - Isonzo Clip Point by Vox - M390 & Marble Carbon Fiber - FX03M-3CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-3CM -
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
MKM - Flame Light by Zieba - M390 & Green Micarta - FL02L-GC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-GC -
Benchmade - Bailout Knife - CPM-M4 - Tanto - Titanium Handle - Limited Edition - 537BK-2302 - knife
A perfect combination in the EDC paradise. The Bailout® holds a special place in the hearts of those who appreciate tactical toughness in their everyday carry, and now we're pairing this sleek and ultralight folding knife with the ultimate super-material: titanium.
The all-new limited edition 537BK-2302 Bailout® features the much-loved CPM-M4 tanto blade, now in cobalt black Cerakote, but the star of this show is its handle made of bead-blasted 6Al-4V titanium manufactured in the USA.
Accentuated with PVD-coated blue hardware, including a Crater Blue lanyard pommel, this edition is limited to 1000 pieces.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Origin: USA
Blade: CPM-M4 steel (62-64 HRC)
Blade Finish: Cobalt Black Cerakote
Handle: 6AI-4V Titanium
Blade Length: 86mm.
Blade Thickness: 2.3mm.
Closed Length: 119mm.
Overall Length: 205mm.
Closed Thickness: 9.7mm
Weight: 103g.
Locking Mechanism: AxisLock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited edition of 1000 piecesBM-537BK-2302 -
Benchmade - Mini Barrage 585 Axis Assist Knife Black G-10 - knife
Intended use: Tactical / sport
Type of production: Industrial
Production Lama USA with assisted opening
Blade: steel 154CM 58 / 61HRC
Blade treatment: -
Handle: Black Valox polymer
Blade length: 73mm.
Blade thickness: 2.5 mm.
Closed Length: 101mm.
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 96g.
Closing: AXIS Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: design by OsborneBM-585-03 -
Benchmade - 317BK-02 - Weekender - S90V Double Red Micarta - utility knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S90V 59/61HRC steel
Blade Finish: Black Battlewash
Handle: Canvas Micarta
Blade Length: 71mm. / 50mm.
Blade thickness: 2.3mm.
Length closed: 97.8mm.
Overall length: 179mm. / 169mm.
Thickness when closed: 10mm.
Weight: 65g.
Closure: Slipjoint
Clip: -
Packaging: Cardboard box with Benchmade logos
Notes: Double blade and bottle opener/cap lifter toolBM-317BK-02 -
Benchmade - Mini Adamas - MagnaCut & Marble Carbon Fiber - 273-03 - knife
Intended Use: Utility / Hiking
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-MagnaCut 63/65HRC tool steel
Blade finish: Satin finish
Handle: Marble Carbon Fiber with FDE stainless steel folders
Blade Length: 82.6mm.
Blade thickness: 3.6mm.
Length closed: 111mm.
Total length: 193mm.
Handle thickness: 16mm.
Weight: 130g.
Closure: AxisLock
Clip: Deep Pocket, removable and reversible, stainless steel with FDE finish
Packaging: cardboard box with Benchmade logos, microfiber pouch with Benchmade logos
Notes: high-carbon steel blade, not stainless; wash and dry carefully after use and grease in case of storageBM-273-03 -
Benchmade - Mini Freek - Cerakote CPM-M4 & Black/Gray G10 - 565BK-02 - knife
This one is for the fans! For years Benchmade has received countless requests to make a "Super Freek" mini, and it has listened to you loud and clear. The Mini Freek 565BK-02 takes everything you love about its full-size counterpart and reduces it to a more pocketable form, including the black CPM-M4 blade and instantly recognizable tricolor G10 handle. With unmistakable style and uncompromising strength, this Mini Freek is truly super.
Intended use: sporty
Type of production: industrial
Country of manufacture: USA
Blade: CPM-M4 62/64HRC stainless steel
Blade treatment: Cerakote
Handle: G10 with anodized aluminum spacers
Blade length: 76.2mm.
Blade thickness: 2.6mm.
Length closed: 102mm.
Total length: 179mm.
Weight: 82g.
Closure: AxisLock
Clip: Stainless steel, removable and reversible
Packaging: cardboard box with Benchmade logos
Notes: -BM-565BK-02 -
Benchmade - Flyway - Small Game Hunter Knife - CPM-S90V & OD Green G10 - 15700-01 - knife
The Flyway has proven to be the ultimate fixed blade for offshore game and waterfowl. The 15700-01 offers the ultimate in edge retention thanks to CPM-S90V steel, which will keep you in the field well into the season. To change things up even further, the ergonomic handle now includes OD green G10 gauntlets with orange rings for visibility, while the orange Boltaron sheath is perfect for attaching to a chest rig or stuffing into a backpack.
Intended Use: Hunting/Light Utility
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S90V stainless steel (59/61HRC)
Blade finish: Satin finish
Handle: G10
Blade length: 68mm.
Blade thickness: 2.3mm.
Total length: 177mm.
Weight: 58.5g.
Sheath: Boltaron
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15700-01 -
Benchmade - Altitude knife - Orange CPM-S90V & Carbon Fiber - 15201OR - knife
Built on a solid foundation, the revamped 15201OR Altitude takes ultralight hunting gear to new levels. Incorporating feedback from our fans, this minimalist fixed blade features full-length carbon fiber sheaths for better blade control in CPM-S90V. This less than 50-gram machining tool earns its place at your side with a balance of corrosion resistance, strength, and edge retention.
Intended Use: Hunting
Type of production: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S90V (59/61HRC)
Blade treatment: Cerakote
Handle: stainless steel CPM-S90V with carbon fiber grips
Blade length: 78mm.
Blade thickness: 2.3mm.
Total length: 175mm.
Weight: 47g.
Sheath: made of Boltaron, for neck or compatible with M.O.L.L.E. type attachments.
Packaging: cardboard box with Benchmade logos
Notes: -BM-15201OR -
MKM - Eclipse by Vox - Dark Stonewash MagnaCut & Purple Titanium - EL-PRBKD - Knife
Eclipses indicate significant periods of change and transformation.
While a solar eclipse opens the portal to new beginnings and changes,
a lunar eclipse reveals energies that help us complete a journey or change course in some way...
Either way, follow the light beyond the darkness!
Intended Use: Sporty
Production type: Industrial
Country of manufacture: Italy
Blade: MagnaCut steel HRC 61/63
Blade treatment: Dark Stonewashed
Handle: Titanium Gr.5 Ti6AI4V Dark Stonewashed with anodizing
Blade length: 81mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 191mm.
Weight: 90g.
Closure: FrameLock
Clip: anodized titanium, deep pocket, removable
Sheath: zippered nylon pouch
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VoxnaesMK-EL-PRBKD -
Benchmade - Grizzly Creek Hunting Folder - S30V Wood - 15062 - knife
Better than ever. The 15062 Grizzly Creek is the next phase of the quintessential field multitasker, featuring subtle refinements such as the CPM-S30V non-recurved drop point blade for easy sharpening and orange accents for increased visibility in the field. Retaining the unmistakable folding skinning hook, fantastic ergonomics and classic styling of its predecessor, the Grizzly Creek remains the complete package for the hunter who wants everything in a pocket folder.
Intended Use: Hunting
Production type: Industrial
Country of manufacture: USA
Blade: stainless steel CPM-S30V 58/60HRC
Blade finish: satin-finished
Handle: stabilized wood
Blade length: 89mm.
Blade thickness: 3.15mm.
Length closed: 110mm.
Total length: 198mm.
Thickness when closed: 15.2mm.
Weight: 118.5g.
Closure: AXIS Lock
Clip: Removable, stainless steel
Sheath: -
Packaging: Cardboard box with Benchmade logos
Notes: retractable skinning hookBM-15062 -
Benchmade - Raghorn knife - CPM-S30V - OD Green G10 - 15600-01 - knife
For the big game hunter who tracks their prey through the woods, every gram counts. Try the brand new 15600-01, an ultra-lightweight fixed blade knife designed to process large animals.
Building on the ergonomics of the 15600 model, the 15600-01 features an OD Green G10 handle that fits well in the hand and a reliable CPM-S30V stainless steel.
Intended use: Hunting / Light Utility
Type of production: Industrial
Country of production: USA
Blade: in CPM-S30V stainless steel (58-60)
Blade finish: Satin
Handle: G10 Green
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 45g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15600-01 -
Benchmade - 945-2 Mini - S90V - Osborne knife Reverse Tanto - Carbon Fiber - knife
Type of production: Industrial
Country of production: USA
Blade: in CPM-S90V steel 59/61HRC
Blade finish: Satin
Handle: Carbon Fiber
Blade length: 74mm.
Blade thickness: 2.7mm.
Closed length: 97.5mm.
Total length: 172mm.
Thickness when closed: 10mm.
Weight: 54g.
Lock: AXIS Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Design by Warren OsborneBM-945-2 -
Benchmade - Hunt Taggedout knife 15536 - S45VN - OD Green - Axis Lock Knife - knife
The Taggedout, a knife inspired by the Bugout line, is lightweight and perfect for long distance hunters or outdoor enthusiasts.
By popular demand, the Taggedout 15536 modifies the 15535 model, making it ideal as a multifunctional outdoor EDC. The thumb hole is replaced with an orange anodised stud, and a lanyard spacer in the same colour is added. This new version of the Taggedout also changes the handle of the 15535 model, previously in Grivory, to one in OD green G10. The blade steel has been upgraded to CPM-S45VN, which provides greater edge retention and corrosion resistance.
This revamped Taggedout is ready to meet all your adventure needs.
Intended use: Sporty / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S45VN (60-62 HRC)
Blade finish: Satin finish
Handle: OD Green G10
Blade length: 89mm.
Blade thickness: 2.3mm.
Length closed: 116mm.
Total length: 206mm.
Thickness when closed: 12.5mm
Weight: 59.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-15536 -
MKM - Miura - M390 Button Lock - Titanium Blue - MI-TBL - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBL -
Benchmade - Mini Bugout - Sea Foam 533GY-06 Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Tungsten Gray Cerakote
Handle: Grivory
Blade Length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533GY-06 -
Benchmade - Mini Bugout - Alpine Glow 533BK-05 Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cobalt Black Cerakote
Handle: Grivory
Blade Length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533BK-05 -
Benchmade - Mini Bugout - Mesa Red 533-04 Axis Lock - knife
Intended Use: Sporting / EDC
Production type: Industrial
Country of Production: USA
Blade: CPM-S30V 58/60HRC
Blade Finish: Satin finish
Handle: Grivory
Blade length: 72mm.
Blade thickness: 2.3mm.
Length closed: 94mm.
Total length: 164mm.
Thickness when closed: 10.5mm
Weight: 42.5g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: -BM-533-04 -
Benchmade - Narrows Axis - M390 Titanium - 748 - knife
Lean, light and strong. These are the basic parameters we set for the 748 Narrows™️, but there is nothing basic about this folding knife of the future. At 7.1mm thick, the titanium handle of Narrows™️ is the thinnest full-size frame we have ever built, making it the most pocket-friendly and space-saving large knife in our line. As a result, we have also introduced a new version of the AXIS®️ locking system, eliminating the steel liners and omega springs and replacing them with a sleek new locking pin and torsion spring assembly. With the benefit of a slim drop-point blade made of M390 stainless steel with prominently PVD-coated sapphire blue hardware and spacers, this elegant EDC takes ultralight utility to the extreme.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: M390 58/61HRC
Blade treatment: Satin and Stonewashed
Handle: Titanium 6Al-4V
Blade Length: 87mm.
Blade thickness: 2.03mm.
Length closed: 117mm.
Total length: 203mm.
Thickness when closed: 7.1mm.
Weight: 68g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel with Sapphire Blue PVD treatment
Packaging: Cardboard box with Benchmade logos
Notes: -BM-748 -
Benchmade - Bugout Axis - Cerakote & Alpine Glow - 535BK-06 - knife
The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logosBM-535BK-06 -
Benchmade - Bugout Axis - Cerakote & Storm Gray - 535BK-08 - knife
The Bugout® is designed for the modern outdoor adventurer, incorporating the lightest, highest-performance materials into an extremely slim, ergonomic package. The CPMS30V blade steel and Benchmade's AXIS assisted locking technology can tackle any task. Made in the United States.
Intended Use: Sporting / EDC
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC
Blade finish: Cerakote
Handle: CF-Elite (Grivory)
Blade length: 82mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 189mm.
Thickness when closed: 10.5mm
Weight: 52g.
Closure: Axis Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logosBM-535BK-08 -
Benchmade - SOCP Fixed Blade Trainer - 185T - unsharpened training knife
Proper preparation is the key to effective use of any defensive system. This is the mission of the 185T SOCP Fixed Blade Trainer, designed to perfectly mimic the weight and feel of a real sharp counterpart, but with a high visibility red 440C unsharpened blade and a G10 handle.
Intended Use: Training/Tactical
Type of production: Industrial
Country of Production: USA
Blade: unsharpened, 440C stainless steel
Blade treatment: High-visibility coating
Handle: G10
Blade length: 174mm.
Blade thickness: 3.8mm.
Length closed: 114mm.
Total length: 291mm.
Weight: 186g.
Sheath: Thermoplastic polymer
Packaging: Cardboard box with Benchmade logos
Notes: training knife with unsharpened bladeBM-185T -
Benchmade - Full Immunity - Woodland Green - 290BK-2 - knife
When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.
Intended Use: Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: Aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK-2 -
Benchmade - Full Immunity - Flat Dark Earth - 290BK-1 - knife
When blade length is limited, the need is not. Designed for easy carry and compactness, the Full Immunity™ features a less than 2.5-inch CPM-M4 blade with a Cobalt Black Cerakote® finish that boasts exceptional edge retention and strength in a Wharncliffe profile that tapers to an ultra-fine point. The included lanyard speeds retrieval from the pocket for manual use in emergency situations. Finished with anodized aluminum handles, the Full Immunity™ is a concentration of utility in a compact configuration.
Intended Use: Tactical
Type of production: Industrial
Country of manufacture: USA
Blade: CPM-M4 62/64 HRC carbon steel
Blade finish: cobalt black cerakote
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK-1 -
Benchmade - Full Immunity - Crater Blue - 290BK - knife
Intended Use: Tactical
Type of production: Industrial
Country of Production: USA
Blade: carbon steel CPM-M4 62/64 HRC
Blade finish: cobalt black
Handle: aluminum
Blade length: 63mm.
Blade thickness: 2.3mm.
Length closed: 87mm.
Total length: 150mm.
Thickness when closed: 12.7mm.
Weight: 65g.
Closure: AXIS Lock
Clip: Tip Up, stainless steel, removable and reversible, mini deep carry type
Packaging: Cardboard box with Benchmade logos
Notes: -BM-290BK -
Benchmade - Raghorn hunting knife - CPM CruWear - 15600OR - knife
For the big game hunter who stalks prey through the forest, every gram counts. Try the brand new 15600OR Raghorn ™ ️, an ultralight fixed blade knife made for working large animals.
This lightweight hunting knife bares ultra sharp 14 degree CPM-CruWear®️ steel for exceptional cutting performance with high edge life. Cerakote®️ high visibility orange and lightweight carbon fiber add to an uncompromising hunting knife, ready and perfectly suited for any hunting use.
Intended use: Hunting / Light Utility
Type of production: Industrial
Country of production: USA
Blade: CPM-CruWear® carbon steel (63-65)
Blade finish: Cerakote®️ orange
Handle: Carbon Fiber
Blade length: 116mm.
Blade thickness: 2.3mm.
Total length: 2.28mm.
Weight: 22.5g.
Sheath: kydex
Packaging: Cardboard box with Benchmade logos
Note: -BM-15600OR -
MKM - Hero by Tommaso Rumici - M390, Titanium and G10 Black - MK-HR-GTBK - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: G10 grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-GTBK -
MKM - Hero by Tommaso Rumici - M390, Titanium and Micarta Natural - MK-HR-NCT - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Maniago - Italy
Blade: stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta grips , titanium liners and bolsters
Blade length: 93mm.
Blade thickness: 4mm.
Weight: 175g.
Length when closed: 130mm.
Total length: 215mm.
Closure: BackLock
Clip: titanium, removable, deep pocket type
Scabbard: synthetic pouch with zipper closure and belt loop
Packaging: cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Tommaso RumiciMK-HR-NCT -
Benchmade - Taggedout knife 15535 - CPM-154 - Axis Lock Knife - knife
Taggedout, knife inspired by the Bugout line, light, perfect for hunters who travel long distances or outdoor enthusiasts. When you go far with a kit on your back, every gram of weight carried counts. This light and thin hunting folder can handle any activity while you are in the wild, from preparing food to the field to skinning to paracord cutting. Lightweight, highly visible, slim in your pocket and with a razor sharp cut thanks to CPM-154 steel.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: USA
Blade: CPM-154 (58-61 HRC)
Blade finish: Satin finish
Handle: Grivory
Blade length: 99mm.
Blade thickness: 2.3mm.
Closed length: 116mm.
Total length: 206mm.
Thick when closed: 12.5mm
Weight: 59.5g.
Closure: Axis Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Benchmade logos
Note: -BM-15535 -
Benchmade - Mini Crooked River - 15085-2201 - Limited Edition Bull Elk - coltello
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2201 -
Benchmade - Mini Crooked River - 15085-2203 - Limited Edition Mallard Duck - knife
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2203 -
Benchmade - Mini Crooked River - 15085-2202 - Limited Edition Whitetail Deer - knife
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2202 -
Benchmade - Mini Crooked River - 15085-2204 - Limited Edition Ringneck Phesant - knife
15085 LIMITED EDITION ARTIST SERIES
Striking the perfect balance between art and function, the Limited Edition Artist Series highlights four iconic game species and the environments in which they live. In collaboration with independent artist Casey Underwood, each Crooked River Mini has been embellished with detailed images of elk, deer, ducks, and pheasants.
ARTIST INFORMATION
Casey Underwood is an artist who loves the outdoors and resides in Bozeman, Montana. Casey began working full-time in 2015 and has since become one of the most recognizable artists in the outdoor industry. As a prolific illustrator, he has amassed a collection of work that includes more than 100 species of fish and wildlife. Commercially, his freelance drawings are often commissioned by some of the outdoor industry's leading brands. Sharp edges, layers of color, and dashed lines are some of the defining characteristics of Casey's style. When he is not in his studio creating new work, he is likely fishing, hunting, or skiing!
Intended Use: Collection / Hunting
Production Type: Industrial
Country of manufacture: USA
Blade: CPM-S30V 58/60HRC steel
Blade finish: Stonewashed, laser engraved
Handle: Wood, aluminum
Blade length: 86.4mm.
Blade thickness: 2.9mm.
Length closed: 114mm.
Total length: 200mm.
Weight: 93.3g.
Closure: AXIS Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Benchmade logos
Notes: Limited Edition "Artist Series 2022" by Casey UnderwoodBM-15085-2204 -
MKM & Mercury - Makro 2 Knife Sheepsfoot By Vox - Black G10 - MK-MA02-GBK - Sporting Knife
Intended use: Neck Knife / Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 77g.
Scabbard: Black leather sheath, for neck, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-GBK -
MKM - Flame Light by Zieba - M390 & Black Micarta - FL02L-BC - knife
FLAME LIGHT, practical folding knife and now even lighter!
BOHLER M390 dark stone washed steel dagger point blade, flipper opening with ball bearing rotation mechanism and Liner lock system. Stonewashed stainless steel spacer and clip, stainless steel hardware and ring on bronze anodized titanium center pin. Black canvas micarta handle. Sold with zippered nylon sheath and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: Bohler M390 stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 72mm.
Blade thickness: 2.5mm.
Total length: 176mm.
Weight: 55g.
Opening: Carson Flipper system
Washers: steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Sheath: cordura
Packaging: Cardboard box with MKM logos
Notes: Design by Michael ZiebaMK-FL02L-BC -
MKM & Mercury - Makro 1 knife Drop by Vox - Natural Micarta - MK MA01-NC - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 67g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-NC -
MKM & Mercury - Makro 1 knife Drop by Vox - Black G10 - MK MA01-GBK - sports knife
Intended use: Sports
Type of production: Industrial by Mercury
Country of production: Maniago - Italy
Blade: full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 72g.
Sheath: black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA01-GBK