Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Fox - Italico Sheepfoot - FX-540TIBL - M390 & Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased.
* Condition: Never used, but with three marks on titanium anodization.
* Commercially available: In production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: 3 scratches on blue anodizing.
* Box: Present
* Scabbard: Pouch with zipper.
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: M390 59/61HRC stainless steel
Blade finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel hardware
Blade Length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm.
Weight: 95g.
Closure: FrameLock
Clip: flush, AISI 302 stainless steel, removable and reversible
Sheath: zippered pouch, leatherette
Packaging: cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL-CP -
Fox - Vulpis knife - Black Hydroglider M390 & Brass - FX-VP108OTB - knife
The new Vulpis series from Fox Knives wants you to fall in love with Made in Maniago technology and manufacturing innovation with the new small and versatile multi-purpose.
Intended Use: EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Black Idroglider
Handle: Brass
Blade length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 44g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.FX-VP108OTB -
MKM - Isonzo Cleaver by Vox - M390 & Marble Carbon Fiber - FX03M-2CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with a cleaver tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-2CM -
MKM - Miura - M390 Button Lock - Titanium Blue - MI-TBL - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBL -
Fox - Vulpis multi-tool 4 - M390 & Carbon Fiber - FX-VP130-S4-CF - knife
The new Vulpis series by Fox Knives wants to make you fall in love with Made in Maniago technology and production innovation with the new small and versatile multipurpose.
Intended use: EDC
Type of production: Industrial
Country of production: Italy
Blade: M390 59/60HRC stainless steel
Blade Finish: Stonewashed
Handle: Carbon Fiber
Blade length: 55mm.
Blade thickness: 2mm.
Closed length: 63m.
Total length: 135mm.
Closed thickness: 13mm.
Weight: 47g.
Closure: SlipJoint (without blade lock)
Clips: -
Scabbard: -
Packaging: Cardboard box with Vulpis / Fox Knives logosTOOLS INCLUDED: wood saw, flat screwdriver, capsule opener, box opener, chisel
FX-VP130-S4-CF -
Fox - Vulpis knife - M390 & Titanium - FX-VP108TI - knife
The new Vulpis series from Fox Knives wants you to fall in love with technology and manufacturing innovation Made in Maniago with the new small and versatile multipurpose.
Intended Use: EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Stonewashed
Handle: Titanium Sandblasted
Blade length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 29g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.FX-VP108TI -
Fox - Vulpis knife - M390 & Carbon Fiber - FX-VP108CF - knife
The new Vulpis series from Fox Knives wants you to fall in love with Made in Maniago technology and manufacturing innovation with the new small and versatile multipurpose.
Intended Use: EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 59/60HRC stainless steel
Blade finish: Stonewashed
Handle: Carbon Fiber
Blade Length: 44mm.
Blade thickness: 2mm.
Length closed: 63m.
Total length: 106mm.
Thickness when closed: 6mm.
Weight: 17g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Packaging: Cardboard box with Vulpis / Fox Knives logos.FX-VP108CF -
MKM & Mercury - Makro 2 Knife Sheepsfoot By Vox - Black G10 - MK-MA02-GBK - Sporting Knife
Intended use: Neck Knife / Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: G10
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 77g.
Scabbard: Black leather sheath, for neck, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-GBK -
Fox - Livri SlipJoint - Natural Micarta - M390 steel - FX-273MI - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273MI -
Fox - Italicus by ADG - FX-540G10OD - G10 OD Green - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finishing: Satin finish
Handle: G10 with AISI 303 stainless steel bolts and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 95g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540G10OD -
Fox - Italicus by ADG - FX-540NA - Natural Micarta - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade finish: Satin finish
Handle: micarta with AISI 303 stainless steel folders and screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 90g.
Closure: Liner Lock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: pouch with zipper, in cordura
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540NA -
Fox - Italicus by ADG - FX-540TIB - PVD Stonewashed Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 90g.
Closure: FrameLock
Clip: wire, in stainless steel AISI 302 with PVD treatment, removable and reversible
Scabbard: leatherette pouch with zipper
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIB -
Fox - Baby Core by Vox - FX-608TI - Acid Stonewashed Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Acid Stone Washed Titanium with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 110g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608TI -
Fox - Baby Core by Vox - FX-608CF - Carbon Fiber - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin
Handle: Carbon Fiber with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 60g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: wire, AISI 302 stainless steel, removable and reversible
Scabbard: leather
Package: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608CF -
MKM & Fox - Isonzo Cleaver Green by Vox - MK-FX03-2PGO - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Black Idroglider
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGO -
MKM & Fox - Isonzo Cleaver Gray by Vox - MK-FX03-2PGY - knife
Small and compact, but with impetuous personality, with his shots, with his curves and counter-curves, Isonzo is inspired by the magnificent river that breaks through the gaps of the Eastern Alps - Knife made by Fox
Intended use: Sports
Type of production: Industrial by Fox Cutlery
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: on ball bearings
Spacer and details: in anodized aluminum
Clip: steel, flush, removable and reversible
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PGY -
Fox - Baby Core by Vox - FX-608OR - Orange & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608OR -
Fox - Baby Core knife by Vox - FX-608BL - Blue & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608BL -
Fox - Baby Core by Vox - FX-608R - Red & Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608R -
Fox - Baby Core by Vox - FX-608B - Black & Dark Stonewashed - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade finish: Dark Stonewashed
Handle: FRN
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thick when closed: 14mm
Weight: 79g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper VoxnaesFX-608B -
MKM - Isonzo Cleaver knife black by Vox - MK-FX03-2PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Stonewash
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-2PBK -
Fox - Livri SlipJoint knife - Ziricote Wood - FX-273ZW - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Ziricote Wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273ZW -
Fox - Livri SlipJoint knife - Carbon Fiber - FX-273CF - knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Carbon Fiber
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273CF -
Fox - Livri SlipJoint knife - Green Micarta - FX-273 - Knife
Intended use: EDC / Gentleman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390 59 / 60HRC
Blade treatment: Satin finish
Handle: Micarta
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 155mm.
Thick when closed: 8.8mm
Weight: 45g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: Leather pouch with Fox Knives logos
Packaging: Cardboard box with Fox Knives logosFX-273 -
Fox - Pelican knife by Kmaxrom - FX-534CF - Idroglider Carbon Fiber - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: Carbon Fiber with stainless steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj KmaxromFX-534CB -
Fox - Pelican knife by Kmaxrom - FX-534B - Idroglider Black G10 - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: black idroglider
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj KmaxromFX-534B -
Fox - Pelican by Kmaxrom - Orange G10 - FX-534O - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: stonewashed
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj KmaxromFX-534O -
MKM - Miura - M390 Button Lock - Titanium Total Black - MI-TDSW - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade Finish: Black PVD Stonewashed
Handle: Titanium Gr. 5 Ti6AI4V Black PVD Stonewashed with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TDSW -
MKM - Miura - M390 Button Lock - Titanium Bronze - MI-TBR - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-TBR -
MKM - Miura - M390 Button Lock - Titanium Grey - MI-T - knife
THE MAGIC BUTTON FOR HAPPINESS
Did you always think that happiness could not be achieved by simply pressing a button? You were wrong!
Don't confuse it with an assisted-opening or snap-open knife, it's a manual-opening knife that glides super smoothly thanks to a ball-bearing system, but Miura is above all a unique product in the industry thanks to the combination of the button lock type system combined with an integral handle made from solid machined titanium, features that together have never before been seen in industrial knives. These features, along with its fantastic design, led the Miura to win the 2022 Blade Show Imported Knife of the Year award in Atlanta.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel hardened to 58/60HRC
Blade finish: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D machining, CNC machined from billet
Blade length: 69mm.
Blade thickness: 3mm.
Total length: 169mm.
Weight: 72g.
Closure: Button Lock
Clip: titanium, removable and reversible, machined from billet
Packaging: zippered nylon pouch and cardboard box with MKM Maniago Knife Makers logos
Notes: manual opening system, on ball bearings - Winner at the Atlanta 2022 Blade Show as Imported Knife of the Year
We advise our customers that discountische Loyalty are not active for this productMK-MI-T -
MKM & Mercury - Makro 2 knife Sheepsfoot by Vox - Natural Micarta - MK MA02-NC - sports knife
Intended use: Sporty
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Full tang in M390 59/61 HRC stainless steel
Blade treatment: Stone washed
Handle: Natural Micarta
Blade length: 75mm.
Total length: 165mm.
Blade thickness: 4mm.
Weight: 66g.
Sheath: Black leather sheath, with magnetic retention button
Packaging: Cardboard box with MKM Maniago Knife Makers logos
Notes: Design by Jesper VoxnaesMK-MA02-NC -
Fox - Italicus by ADG - FX-540TIBL - Blue Anodized Titanium - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Satin finish
Handle: Blue Anodized Titanium with AISI 303 stainless steel screws
Blade length: 60mm.
Blade thickness: 3mm.
Length closed: 90m.
Total length: 150mm.
Thickness when closed: 11mm
Weight: 95g.
Closure: FrameLock
Clip: wire, in stainless steel AISI 302, removable and reversible
Sheath: leatherette pouch with zipper
Package: Cardboard box with Fox Knives logos
Notes: Design by Antonio Di Gennaro - Opening movement on ball bearings - Carson Flipper opening systemFX-540TIBL -
Fox - Baby Core by Vox - Blue - SanMai SPG2 Special Edition - CO-608BL - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.FX-CO608BL -
Fox - Baby Core by Vox - Black - SanMai SPG2 Special Edition - CO-608B - knife
With this exclusive edition of Coltelleria Collini in collaboration with Fox we have chosen to combine the pocket knife Baby Core by Vox with a Japanese powder steel (sintered) and rolled steel (SanMai) by Takefu Steel.
For this project we have chosen to use the Super Gold2 (SPG2) steel at 62/63HRC for the cutting edge of the blade in order to ensure exceptional cutting performance and durability of the sharpening, while ensuring a remarkable resilience and resistance to oxidation given by the lamination process of the blade.
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Rolled Japanese stainless steel (San Mai) with sintered cutting edge in SPG2 at 62/63HRC
Blade Finish: Satin
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 79g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening system - Exclusive version by Coltelleria Collini, Sprint Run, with Japanese Takefu Steel SPG2 Rolled Stainless Steel.The rolled steel - imported in Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. As early as 1100, expert Japanese blacksmiths combined different materials to give Katana swords incredible cutting capabilities combined with previously unknown strength and flexibility. It is thanks to this revolutionary construction technique that the Samurai swords have been preserved until our days becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, we are now able to have technologically advanced steels already tested and used in cutlery by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.
- Longer cutting edge life
thanks to the use of high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the core steel, the blade, once hardened, reaches hardness and cutting performances definitely higher than those reached with the use of traditional steels.- Greater resilience
Built on the principle of Japanese swords, the multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the lateral coating (Stainless Steel).- Improved corrosion resistance
The steel used for the outer layers (Stainless Steel) gives the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at a galvanic level, a structure that improves corrosion resistance even on the edge.- Easy machining even after heat treatment
Although steel normally becomes harder after hardening, the lateral steel used in multilayer machining does not lose its softness and allows easy machining, drilling or welding even after heat treatment. For optimum blade performance, cryogenic treatment is recommended.- Improved aesthetic performance
Knives made of multi-state steel or damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.FX-CO608B -
MKM & Mercury - Mikro 2 by Vox - Natural Micarta - MK MR02-NC - neck knife
Intended Use: Neck Knife / Sporty
Production type: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: Micarta
Blade length: 50mm.
Total lenght: 110mm.
Blade thickness: 4mm.
Weight: 40g.
Scabbard: Black leather scabbard, for neck, with magnetic retention button.
Package: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by Jesper VoxnaesMK-MR02-NC -
MKM & Mercury - Mikro 2 by Vox - Black G10 - MK MR02-GBK - neck knife
Intended Use: Neck Knife / Sporty
Production type: Industrial by Mercury
Country of Production: Maniago - Italy
Blade: Full tang in stainless steel M390 59/61 HRC
Blade treatment: Stone washed
Handle: G10
Blade length: 50mm.
Total lenght: 110mm.
Blade thickness: 4mm.
Weight: 40g.
Scabbard: Black leather scabbard, for neck, with magnetic retention button.
Package: Cardboard box with MKM Maniago Knife Makers logos.
Notes: Design by Jesper VoxnaesMK-MR02-GBK -
Fox - Baby Core by Vox - FX-608MC - Natural Micarta - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M390 59/61HRC
Blade Finish: Acid Stone Washed
Handle: Natural Micarta with AISI 303 stainless steel screws
Blade length: 65mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 144mm.
Thickness when closed: 14mm
Weight: 80g.
Closure: Liner Lock in AISI 420 stainless steel
Clip: flush, AISI 302 stainless steel, removable and reversible
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes - Opening movement on ball bearings - Carson Flipper opening systemFX-608MC -
Fox - Pelican by Kmaxrom - Black G10 - FX-534 - knife
Destination of use: sports
Type of production: Industrial
Country of production: Italy
Blade: N690 59 / 60HRC stainless steel
Blade treatment: stonewashed
Handle: G10 with stainless steel folders
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 123mm.
Total length: 210mm.
Thick when closed: 18mm
Weight: 160g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon case with zip
Packaging: cardboard box with Fox Knives logos
Notes: Design by Kmrj KmaxromFX-534 -
Fox - Sailing Knife - FX-235 - Boat utility knife
Intended use: knife for sailors
Type of production: Industrial
Country of production: Italy
Blade: stainless steel 420 54 / 54HRC
Blade treatment: satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 105mm
Overall length: 180mm.
Weight: 155g.
Lock: Liner Lock
Packaging: cardboard box with Fox logos
Notes: untie knots, multipurpose tool12511 -
Fox - Sailing Knife 233 - knife
Intended use: knife to sailors
Type of production: Industrial
Production Lama: Italy
Blade: 440A Stainless Steel 56 / 58HRC
Blade treatment: -
Handle: Aluminium Aeronautic
Blade length: 70mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 175mm.
Thick when closed: -
Balancing: -
Weight: 210g.
Lock: Liner Lock
Clip: -
Sheath: -
Packaging: Cardboard box with Fox logos
Notes: Untie knots forged - hole Gira crickets on the bladeFX-233 -
Fox - Sailing Sea Master - 234 - coltello da barca
Destinazione d'uso: Sportivo / Nautico
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 440C
Trattamento Lama: -
Manicatura: Acciaio Inox e G-10
Lunghezza lama: 82mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 105mm.
Lunghezza totale: 182mm.
Spessore da chiuso: 11mm.
Bilanciatura: -
Peso: 126g.
Chiusura: Frame Lock
Clip: -
Fodero: -
Confezione: scatola in cartone con loghi Fox
Note: Scioglinodi in acciaio inox con fermo di chiusura frame lock7219