Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Brusletto - Vassfaret F/150 - Signature Edition - 19932 - knife
Intended use: Hunting / sports / collection
Type of production: semi-industrial
Production Blade: Norway
Blade: 440C stainless steel
Treatment Blade: mirror polishing
Handle: Micarta
Blade length: 90mm.
Blade Thickness: 3.5mm.
Length closed: -
Overall length: 210mm.
Balancing: back
Weight: 238g.
Sheath: Black leather
Note: version with blade autographed by Ken Where Nyhus, CEO of Brusletto & Co. AS10970€143.44Only 2 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Begg Knives - Kwaiken Frame Lock Carbon Fiber Inlays Blue Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MKW-CF-BLKB -
Begg Knives - Kwaiken Frame Lock Carbon Fiber Inlays Gold Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MKW-CF-BLKG -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays Gold Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F-G -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays Blue Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F-B -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F -
Begg Knives - Mini Glimpse Frame Lock Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MG-CF-BLK -
Begg Knives - Mini Glimpse Companion OD Green Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MG-ODG -
RH Preyda - Arkansas Translucent Ultrafine - SMALL - Natural Stone to Sharpen
Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine
Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.
Ideal for rewinding of free razors or for cleaning blades.
Dimensions: 15 x 5 x 1.17 cm.
Quality level: Very highARK30062 -
RH Preyda - Arkansas Water Stone #6000/#1000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30946 -
RH Preyda - Arkansas Water Stone #8000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30934 -
RH Preyda - Arkansas Water Stone #6000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30933 -
RH Preyda - Arkansas Water Stone #3000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30932 -
RH Preyda - Arkansas Water Stone #1000 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30931 -
RH Preyda - Arkansas Water Stone #400 - Sharpening natural stone
THE COMPANY
RH Preyda, a young and aggressive company founded in 2013 by a family of Italian origin, is in charge of extracting and marketing the Arkansas stone, considered the best knife sharpener.Thanks to a skilful mix of craftsmanship, respect for the natural material and knowledge of metals, RH Preyda is able to provide a wide range of products ranging from pocket stone for field use to professional sharpening systems.
THE STONE
This particular Arkansas stone is the perfect mix between synthetic and natural stones: it works with water and has the granulometric purity of the synthetics, but is made entirely with natural stones Arkansas Novaculite carefully selected, pulverized and compacted in blocks of 203x76x25mmType: stone for water sharpening
Quality level: very high
Country of production: USA
Dimensions: 203.2x76.2x25.4mm
Notes: equipped with anti-slip rubber supportRH-30930 -
RH Preyda - Arkansas Translucent Ultrafine - LARGE - Natural Stone to Sharpen
Natural stone for sharpening, oil, type Arkansas Translucent Ultrafine
Made in USA, Made of Novaculite of the highest quality and cleverly cut at the artisan level, it guarantees very high performances both in sharpening and polishing. Contained in a practical wooden box, it is not fastened or glued and is inserted into a comfortable silicone non-slip support.
Ideal for rewinding of free razors or for cleaning blades.
Dimensions: 20 x 5 x 1.17 cm.
Quality level: Very highARK30063 -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock