Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: in good condition
Available in stores: NO
Sharpening: Resharpened by our internal laboratory
Marks on blade: NO
Marks on handle: YES, small scratches
Packaging: YES
Checked and Certified by our internal laboratory
A pollywog represents metamorphosis in the animal kingdom, adapting and changing its form to survive in its environment. The same principle applies here. The Spyderco Poliwog CLIPIT® thrives in a small-knife-friendly environment while keeping the features necessary to excel in a harsh, heavy cutting and performance setting. Its distinctive opened-ended Ball Bearing Lock™ exposes the knife's inner workings for easy cleaning and rates as one of Spyderco's highest strength locking mechanisms. Pulling back on the ball unlocks the blade ambidextrously from either side of the knife.

The hand settles on the curved handle positioning the index finger into a choil that optimizes control and generates less fatigue and pressure on the hand during cutting. Made from VG-10, the blade has a hollow-ground edge with a weight reducing swedge-grind extending mid-spine to the tip. It is available in PlainEdge. Its ambidextrous wire-tension pocket clip sets the Poliwog tip-up in the pocket.

Intended use: Sporting / EDC

Type of production: Industrial
Blade Production: Japan
Blade: in VG10 stainless steel
Blade Treatment: -
Handle: in steel
Blade length: 55mm.
Blade thickness: 3mm.
Closed length: 86mm.
Total length: 145mm.
Thickness when closed: -
Balance: -
Weight: 116g.
Closure: Ball Bearing Lock™
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION

Type: Previously Purchased
Condition: Like New
Available in stores: YES
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: YES
Checked and Certified by our internal laboratory
Intended use: Sport / EDC

Type of production: Industrial
Country of production: Taiwan
Blade: In CTS-XHP stainless steel with full flat sharpening
Blade treatment: satin finish
Handle: FRN Fiberglass Reinforced Nylon bearing
Blade length: 71mm.
Blade thickness: 2mm.
Closed length: 91mm.
Total length: 163mm.
Closed thickness: 7.5mm.
Weight: 60g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Note: Design by Sal Glesser

Spyderco's Smock Knife is one of the most anticipated knives of recent times. Crafted in collaboration with renowned knifemaker Kevin Smock, the knife features a unique design that combines an elegant front opening and a push-button actuated Compression Lock locking mechanism.

Kevin Smock, a knife enthusiast since childhood, began customizing stock knives in 2012 and has subsequently developed his skills in craft knife making. His passion for knives is combined with his experience in product design, leading to the creation of innovative and unconventional knives.

Intended use: Sport/EDC

Type of production: Industrial
Blade production: Taiwan
Blade: CPM-S30V stainless steel
Blade treatment: -
Handle: Carbon Fiber
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closed thickness: 11mm.
Balancing: -
Weight: 104g.
Closure: Compression Lock
Clips: Stainless steel
Scabbard: -
Packaging: Cardboard box with Spyderco logos
Note: -

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CTS BD-1
Blade treatment: Black DLC
Handle: FRN (Fiberglass Reinforced Nylon)
Blade length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: lighter and cheaper version of the Para 3 model with G10 handle

Intended Use: Sporting

Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Intended use: Sports / EDC

Type of production: Industrial
Country of production: Japan
Blade: Bohler K390 carbon steel at 64 / 65HRC
Blade finish: Satin finish
Handle: FRN
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 34g.
Closure: Back Lock
Clip: in stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: variant in Blue FRN made of Bohler K390 carbon steel

Intended use: Sports

Type of production: Industrial
Production Country: United States
Blade: stainless steel CPM-S45VN
Blade treatment: PVD
Handle: G10
Blade length: 75mm.
Blade thickness: 3.8mm.
Closed Length: 109mm.
Overall length: 184mm.
Weight: 96g.
Closing: Compression Lock
Clips: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports / Collection

Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel LC200N high corrosion resistance
Blade treatment: Stone Washed
Handle: Titanium
Blade length: 84mm.
Blade thickness: 3.0mm.
Closed Length: 113mm.
Overall length: 198mm.
Thick when closed: 12mm.
Weight: 108g.
Lock: Frame Lock
Clips: stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Marcin Slysz

Intended use: Tactical / EDC

Type of production: Industrial
Country of Origin: USA
Blade: CPM-S30V stainless steel
Blade treatment: Satin finish
Handle: G10 liners with embedded stainless steel
Blade length: 79mm.
Blade thickness: 4mm.
Closed Length: 114mm.
Overall length: 192mm.
Thick when closed: 11mm.
Weight: 113g.
Closure: Front Lock
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich

Intended Use: Sport / Collection

Type of production: Industrial
Country of production: USA
Blade: Stainless steel CPM-S35VN Powder Steel
Blade treatment: TiNi
Handle: FRN Lightweight
Blade length: 75mm.
Blade thickness: 3mm.
Closed Length: 98mm.
Overall length: 175mm.
Thick when closed: 14mm.
Balancing: -
Weight: 70g.
Locking System: Back Lock
Clip: stainless steel
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: Collection

Type of production: industrial
Blade: D.P.S.15 rolled stainless steel damascus with VG-10 58HRC cutting edge
Country of manufacture: Japan
Handle: brushed titanium
Blade length: 97mm.
Blade thickness: 3mm.
Length closed: 107mm.
Total length: 222mm.
Weight: 119g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: leatherette zippered pouch with Spyderco logos
Notes: the blade is made of a special 31-layer steel produced by Takefu Special Steel Company Ltd.

Spyderco - Matriarch 2 - C12SBK2 - knife

Intended Use: EDC / Sports / Collection

Type of production: Industrial
Production Lama: Japan
Blade: stainless steel VG-10
Treatment Lama: -
Handle: FRN Black
Blade length: 90mm.
Blade thickness: 2mm.
Closed Length: 125mm.
Overall length: 210mm.
Thick when closed: -
Balancing: -
Weight: 98g.
Closure: Back Lock
Clips: stainless steel
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -

Intended use: Sport

Type of production: industrial
Blade: stainless steel VG-10
Treatment Lama: -
Blade Production: Japan
Handle: Stainless Steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 161g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -

Green - C11FPGR - knife
Blade: 58HRC VG-10
Stainless Steel Handle: FRN Blade
Length: 75mm.
Blade Thickness: 2.5mm.
Overall Length: 180mm.
Weight: 66g.
Lock: Back lock
Clips: Stainless Steel
Sheath: - Notes: -

Intended Use: sports / tactical

Type of production: industrial
Production Blade: Japan
Blade: Stainless steel with rolled edge in ZDP-189 to 67HRC and cheeks external 420J2
Treatment Lama: -
Handle: Carbon Fiber
Blade length: 86mm.
Blade Thickness: 3mm.
Closed Length: 108mm.
Total length: 194mm.
Balance: -
Weight: 88g.
Closure: Back Lock
Clips: stainless steel, removable and reversible
Sheath: -
Notes: -

Destinazione d'uso: Sportivo Tipo di produzione: industriale Lama: in acciaio inox VG-10 58HRC Trattamento Lama: - Produzione Lama: Japan Manicatura: Black FRN con liners annegati in acciaio inox Lunghezza lama: 75mm. Spessore della lama: 2.5mm. Lunghezza chiuso: 107mm. Lunghezza totale: 180mm. Bilanciatura: - Peso: 72g. Chiusura: Back Lock Clip: amovibile, multiposizione, in acciaio inox Fodero: - Note: -

Intended use: tactical

Type of production: industrial
Blade production: Japan
Blade: VG-10 stainless steel
Blade treatment: -
Handle: G-10 carrier with stainless steel right liner
Blade length: 106mm.
Blade thickness: 3mm.
Closed length: 132mm.
Total length: 234mm.
Balancing: -
Weight: 234g.
Closure: Back Lock
Clip: in stainless steel, reversible and removable
Scabbard: -
Note:

Intended use: Sport

Type of production: industrial
Blade: stainless steel ZDP-189
Treatment Lama: -
Blade Production: Japan
Handle: FRN Grey with stainless steel liners drowned
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall Length: 220mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: -

Intended Use: Sporting / Collection

Production Type: Industrial
Blade production: USA
Blade: Stainless steel CPM-S30V Powder Steel
Blade Treatment: -
Handle: G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 98mm.
Total length: 175mm.
Thickness when closed: 14mm.
Balance: -
Weight: 104g.
Closure: Back Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

Spyderco - Police Steel - C07P - knife

Intended use: Sport

Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Lama: -
Handle material: steel
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 8mm
Balance: -
Weight: 158g.
Closure: Back Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes:

Intended Use: Sports

Type of production: Industrial
Blade production: China
Blade: Stainless steel 8Cr13MoV
Blade Treatment: -
Handle: Stainless steel and G-10
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 195mm.
Thickness when closed: 16mm.
Balance: -
Weight: 116g.
Closure: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: Cardboard box with Spyderco logos
Notes: -