Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Hogue - EX-01 3.5" Folding knife Drop Point Stonewash - G-10 G-Mascus Green
Intended use: Tactical
Type of production: Industrial
Production Lama: USA
Blade: 154CM stainless steel at 58 / 60HRC
Blade treatment: Stonewashed
Handle: G-10 3D machined with G-Mascus designs
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed length: 114mm.
Total length: 201mm.
Thick when closed: 11mm
Balancing: -
Weight: 124g
Closure: Button Lock with safety system
Clip: in Stonewashed Stainless Steel
Sheath: -
Packaging: Cardboard box with Hogue logos
Notes: Design by Allen Elishewitz34178 -
Carl Schlieper - Folder Classic knife - micarta - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years, various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with micarta handle - knife made in Germany in the 90s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 70mm.
Total length: 173mm.
Balancing: -
Weight: 107gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-GMI -
Carl Schlieper - Poket knife - micarta - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with micarta handle - knife made in Germany in the 90s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and micarta
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 81gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-MI -
Carl Schlieper - Poket knife - wood - vintage 90s - knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Traditional pocket knife with wooden handle - knife made in Germany in the 1990s.
Intended use: Collection
Blade: stainless steel
Production Lama Germany
Handle: nickel silver and wood
Primary blade length: 60mm.
Total length: 155mm.
Balancing: -
Weight: 82gr.
Closure: Back Lock
Clip:
Sheath: -
Note: -CS-FO-LE -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Carl Schlieper - Survival Companion Knife - Vintage - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
* Type: Previously purchased
* Condition: in like new condition
* Available on the market: no longer in production, difficult to find, dating back to the 80s
* Sharpening: Original
* Marks on the blade: no
* Marks on the handle: no
* Box:-
* Sheath: in leather
* Manuals, Certificates and Warranties: -
* Checked and certified by our internal laboratoryCarl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid in Germany. Products included freehand knives, tools and razors. A branch of the company in Solingen was engaged in the production of knives including slipjoint, automatic knives, daggers, machetes, bowie, razors and kitchen knives. Over the years various brands and 22 patents held by the company have been created and thousands of pieces sold worldwide. Carl Schlieper was liquidated for bankruptcy in 1993. The production of the brand was subsequently acquired by Freidrich Olbertz in Solingen.
Intended use: Collection / Survival
Type of production: industrial
Blade: 440A Ice Tempered stainless steel
Country of production: Germany
Handle: brass, coated with synthetic material, hollow inside (useful space approx. 50mm. X 14mm.) With screw cap
Blade length: 185mm. (length of serration on the back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balancing: on the guard
Weight: 400g.
Sheath: in leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in excellent conditionCS-SCK-CP-1 -
Carl Schlieper - Vintage Survival Companion Bowie - PRIVATE COLLECTION - knife
Knife from a private collection - presumably produced in the early 1980s - overall in excellent condition, with factory sharpening - accompanied by original leather sheath - checked and certified by our in-house laboratory.
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was involved in the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors, and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated by bankruptcy in 1993. Production of the brand was later acquired by Freidrich Olbertz in Solingen.
Intended use: Collection/Survival
Type of production: industrial
Blade: stainless steel 440A Ice Tempered
Country of manufacture: Germany
Handle: brass, synthetic coated, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 400g.
Sheath: leather, with pocket containing a sharpening stone
Notes: knife from the early 1980s, from a private collection, overall in very good conditionCS-SCK-CP -
Carl Schlieper - Survival Companion Knife - Vintage knife
Carl Schlieper Stahlwarenfabrik & Export was originally a trading company founded between 1754 and 1798 in Remscheid, Germany. Products included knives, tools and freehand razors. A branch of the company in Solingen was responsible for the production of knives including slipjoint, automatic knives, daggers, machetes, bowies, razors and kitchen knives. Over the years, several trademarks were created and 22 patents held by the company and millions of pieces sold worldwide. Carl Schlieper was liquidated through bankruptcy in 1993. Production of the brand was subsequently taken over by Freidrich Olbertz in Solingen.
Survival knife produced in Germany since the 1970s.
Intended use: Collection/Survival
Type of production: industrial
Blade: ICE TEMPERED stainless steel, PVD coated
Country of production: Germany
Handle: brass coated with synthetic material, hollow inside (usable space approx. 50mm. x 14mm.) with screw cap with o-ring
Blade length: 185mm. (serrated length on back 95mm.)
Blade thickness: 4.8mm.
Total length: 304mm.
Balance: on the guard
Weight: 401g. (609G. scabbard included)
Scabbard: leather, with pocket containing a sharpening stone
Notes: original cardboard boxTranslated with www.DeepL.com/Translator (free version)
CS-SUR-COMP -
Hogue - EX-01 3.5" Folding Drop Point Stonewash - G-10 G - coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox 154CM a 58/60HRC
Trattamento Lama: Stonewashed
Manicatura: alluminio
Lunghezza lama: 95mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 114mm.
Lunghezza totale: 201mm.
Spessore da chiuso: 11mm
Bilanciatura: -
Peso: 124g.
Chiusura: Button Lock con sistema di sicurezza
Clip: in Acciaio Inox Stonewashed
Fodero: -
Confezione: Scatola di cartone con loghi Hogue
Note: Design by Allen Elishewitz7894D -
Hogue - EX-01 3.5" Folding Tanto Point Stonewash - G-10 G-Mascus Black coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox 154CM a 58/60HRC
Trattamento Lama: Stonewashed
Manicatura: G-10 lavorato a 3D con disegni G-Mascus
Lunghezza lama: 95mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 114mm.
Lunghezza totale: 201mm.
Spessore da chiuso: 11mm
Bilanciatura: -
Peso: 124g.
Chiusura: Button Lock con sistema di sicurezza
Clip: in Acciaio Inox Stonewashed
Fodero: -
Confezione: Scatola di cartone con loghi Hogue
Note: Design by Allen Elishewitz7894 -
Hogue - EX-01 4" Folding Drop Point Stonewash - Aluminum Matte OD Green coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox 154CM a 58/60HRC
Trattamento Lama: Stonewashed
Manicatura: alluminio
Lunghezza lama: 108mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 127mm.
Lunghezza totale: 227mm.
Spessore da chiuso: 16mm
Bilanciatura: -
Peso: 160g
Chiusura: Button Lock con sistema di sicurezza
Clip: in Acciaio Inox Stonewashed
Fodero: -
Confezione: Scatola di cartone con loghi Hogue
Note: Design by Allen Elishewitz7895 -
Hogue - EX-01 4" Folding Tanto Point Stonewash - G-10 coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: in acciaio inox 154CM a 58/60HRC
Trattamento Lama: Stonewashed
Manicatura: G-10 lavorato a 3D con disegni G-Mascus
Lunghezza lama: 108mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 127mm.
Lunghezza totale: 227mm.
Spessore da chiuso: 16mm
Bilanciatura: -
Peso: 150g
Chiusura: Button Lock con sistema di sicurezza
Clip: in Acciaio Inox Stonewashed
Fodero: -
Confezione: Scatola di cartone con loghi Hogue
Note: Design by Allen Elishewitz7893 -
Hogue - EX-F01 5.5 "Fixed Drop Point Black Kote - G-10 G-Mascus Desert knife
Hogue - EX-F01 5.5 "Fixed Drop Point Black Kote - G-10 G-Mascus Desert knife
Intended Use: Tactical
Type of production: Industrial
Production Lama USA
Blade: full tang stainless steel A2 to 57/59HRC
Treatment Blade: Black Kote
Handle: G-10 worked with 3D drawings G-Mascus
Blade length: 139mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 266mm.
Thick when closed: -
Balance: -
Weight: 310g.
Closing: -
Clip: -
Sheath: Ballistic Nylon with rigid insert and attacks SPRINGS
Packaging: Cardboard box with logos Hogue
Notes: Torx removable contained in the handle - Design by Allen Elishewitz7890D -
Hogue - EX-F01 5.5 "Fixed Drop Point Black Kote - G-10 G-Mascus Green knife
Hogue - EX-F01 5.5 "Fixed Drop Point Black Kote - G-10 G-Mascus Green knife
Intended Use: Tactical
Type of production: Industrial
Production Lama USA
Blade: full tang stainless steel A2 to 57/59HRC
Treatment Blade: Black Kote
Handle: G-10 worked with 3D drawings G-Mascus
Blade length: 139mm.
Blade thickness: 6.3mm.
Length closed: -
Total length 266mm.
Thick when closed: -
Balance: -
Weight: 310g.
Closing: -
Clip: -
Sheath: Ballistic Nylon with rigid insert and attacks SPRINGS
Packaging: Cardboard box with logos Hogue
Notes: Torx removable contained in the handle - Design by Allen Elishewitz7890G -
Hogue - EX-F01 5.5" Fixed Drop Point Black Kote - G-10 G-Mascus Black coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio A2 a 57/59HRC
Trattamento Lama: Black Kote
Manicatura: G-10 lavorato a 3D con disegni G-Mascus
Lunghezza lama: 139mm.
Spessore lama: 6.3mm.
Lunghezza chiuso: -
Lunghezza totale: 266mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 310g.
Chiusura: -
Clip: -
Fodero: Nylon Balistico con inserto rigido ed attacchi MOLLE
Confezione: Scatola di cartone con loghi Hogue
Note: Chiave Torx amovibile contenuta nell'impugnatura - Design by Allen Elishewitz7890B -
Hogue - EX-F01 7" Fixed Drop Point Black Kote - G-10 G-Mascus Desert coltello
Destinazione d'uso: Tattico
Tipo di produzione: Industriale
Produzione Lama: USA
Lama: full tang in acciaio A2 a 57/59HRC
Trattamento Lama: Black Kote
Manicatura: G-10 lavorato a 3D con disegni G-Mascus
Lunghezza lama: 178mm.
Spessore lama: 6.3mm.
Lunghezza chiuso: -
Lunghezza totale: 305mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 356g.
Chiusura: -
Clip: -
Fodero: Nylon Balistico con inserto rigido ed attacchi MOLLE
Confezione: Scatola di cartone con loghi Hogue
Note: Chiave Torx amovibile contenuta nell'impugnatura - Design by Allen Elishewitz7891D -
Hogue - EX-F01 7" Fixed Drop Point Black Kote - G-10 G-Mascus Green coltello
Intended Use: Tactical
Type of production: Industrial
Production Lama USA
Blade: full tang stainless steel A2 to 57/59HRC
Treatment Blade: Black Kote
Handle: G-10 worked with 3D drawings G-Mascus
Blade length: 178mm.
Blade thickness: 6.3mm.
Length closed: -
Total length: 305mm.
Thick when closed: -
Balance: -
Weight: 356g.
Closing: -
Clip: -
Sheath: Ballistic Nylon with rigid insert and attacks SPRINGS
Packaging: Cardboard box with logos Hogue
Notes: Torx removable contained in the handle - Design by Allen Elishewitz7891G