Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Boker - Kalashnikov AK-47 Damascus by Chad Nichols - 11KAL48DAM - knife
In 1947, Mikhail Kalashnikov presented the AK-47 assault rifle he had designed to the Red Army and immediately convinced the decision-making bodies of its development. Only two years later, the now famous AK-47 was officially put into service as the "7.62 mm Awtomat Kalasshnikova obraztsa 1947". Even then, the simple and reliable design with a gas-pressure magazine with a swivel-head breech, the consistent use of stamped plates that could be produced quickly and cheaply, and the adherence to a class of cartridges introduced by the Wehrmacht with the StG 44 with an average performance between machine gun and rifle ammunition set the trend to this day. These characteristics have made the Kalashnikov system the most built and replicated weapon in history, with an estimated 100 million manufactured worldwide.
Introduced in 1959 along with the AKM, the revised variant of the AK-47, the bayonet was no less revolutionary and formative for later designs than the famous assault rifle itself. The concept was based on a knife originally developed by R. Todorov for combat swimmers. It marked a move away from long bayonets, which were used purely as cutting weapons, to a short, mountable knife with insulated shears and a multifunctional rear saw.
Mikhail Kalashnikov personally visited the Boker manufacture in Solingen in 2002 and officially introduced the Boker Kalashnikov knife line to the public. More than 70 years after the AK-47 entered service, we now present a truly exceptional special edition model of the knife line and once again honor its brilliant engineering achievement. The Boker Kalashnikov Bayonet Damascus features a unique Damascus steel blade, made from 6Ch3 and 6Ch4 bayonet steel according to the GRAU index of the former Soviet Army and decorated with General Kalashnikov's signature. The stainless Damascus, handcrafted by Chad Nichols, has 80 layers and is hand forged in the Virus pattern. It features an unusually intricate pattern that is the result of a very controlled forging process.
The handle is CNC machined from a block of 6061-T6 aluminum and then black anodized. The stabilized inlays are made of domestic hornbeam wood, reminiscent of the wood in the stock of the famous assault rifle, and together they form the shape of the characteristic vents on the fore-end. The Russian amber shellac color of the original stocks has been accurately reproduced. They are also CNC milled from solid and inserted by hand. All screws and clip are also black anodized. Made in the Boker knife factory in Solingen, it is delivered with transparent floating display, certificate of authenticity and individual serial number.
Intended Use: CollectionType of production: Semi - Industrial
Country of Production: Germany - Solingen
Blade: 80 ply stainless damask steel, handcrafted by Chad Nichols, from former Soviet Army 6Ch3 and 6Ch4 bayonets
Handle: aluminum 6061-T6 and hornbeam wood
Blade length: 96mm.
Blade thickness: 3.8mm.
Total length: 228mm.
Weight: 158g.
Clip: removable, PVD stainless steel.
Closure: Liner Lock
Package: PVC expositive case that let the knife "float" inside, making it visible from every side
Notes: Certificate of Guarantee - Grey cotton case - Numbered piece on the bladeBO-11KAL48DAM -
Cold Steel - Recon Tanto - Carbon V Made in USA - 1995 NOS Full Set - PRIVATE COLLECTION - 13RT - knife
KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended use: collection / tactical / sporting
Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stockCS-13RTCP -
Cold Steel - Thompson Voyager - Signature Limited Edition - 29UXV - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
SERIAL NUMBER 0231
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratoryIntended use: Sporting/EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packagingCS29UXV -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Cold Steel - Vintage Original Tanto SAN MAI - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.
* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.AP-TAN-SM -
Cold Steel - Vintage Original Brass Tanto - Made in Japan - PRIVATE COLLECTION - 13A - knife
Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13ACP -
Cold Steel - Vintage Gen I Trailmaster - Made in USA - PRIVATE COLLECTION - 16 - knife
Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.16CP -
Cold Steel - Vintage Original Magnum Tanto - Made in Japan - PRIVATE COLLECTION - 13M - knife
Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collection
Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13MCP -
Boker - Tirpitz Damascus - Limited Edition - 110190DAM - folding knife
Intended Use: Collection
Type of production: Industrial
Production Country: Germany
Blade: stainless Damascus steel 300 layers, from the German battleship Tirpitz was sunk 12 November 1944
Blade treatment: -
Handle: aluminum to silicon AlMgSi1 anodized in color navy blue and walnut inlay in German
Blade length: 100mm.
Blade thickness: 3.5mm.
Overall length: 230mm.
Weight: 165g.
Clip: reversible and removable, stainless steel
Lock: Liner Lock
Packaging: PVC box exhibition that leaves "float" the knife in it, making it visible from all sides
Notes: Certificate of warranty - Case in red cotton - Exemplary limited numbered edition on the handleBO-110190DAM