Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended use: Sporting / Hunting

Production type: Industrial
Country of Production: Italy
Blade: Full tang in NIOLOX stainless steel
Blade finish: Stonewashed
Handle: Micarta
Blade length: 113mm.
Blade thickness: 5mm.
Total length: 240mm.
Weight: 243g.
Sheath: Thermoformed kydex, with Tek-Lok multi-position attachment
Packaging: Cardboard box with Fox Knives logos 
Notes: Design by Gudy Van Poppel - Fixed blade version of the successful folder launched in 2021

These high quality knives, are handcrafted in the tradition of French Thiers cutlery.

This large, perfectly balanced Laguiole hunting knife was made entirely by hand in Laguiole, by a master blacksmith, according to the strict LOG (Laguiole Origine Garantie) quality criteria. Depending on the version, it requires from 109 to 216 working steps.

The blade has a very balanced geometry proven over many decades: it is 11 cm long, 3 cm high and 4 mm thick. Both the bee and the area above the ricasso can be used as a thumb rest.

The blade is ground on both sides to about 22 degrees to the cutting edge (flat grind), so that optimal breaking and scoring is guaranteed and, at the same time, the edge does not round off too quickly. 

The handle scales are polished to a high shine with seven different oils and high quality wax pastes on large felt discs. 

The left handle bears the traditional shepherd's cross (French: croix du berger) as decoration.

Intended Use: Regional/Collection/Outdoor/Hunting

Type of production: handcrafted
Blade: Swedish 12C27 stainless steel at 54HRC satin finish.
Blade Production: France
Handle: Ebony
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 138mm.
Total length: 240mm.
Balance: -
Weight: 180g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -

Intended use: Utility / Tactical

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC stainless steel with stonewash finish
Handle: Black Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balance: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

Yankee & Sekira - a hatchet and an axe.

The key difference between the two? The former can be used with one hand while the latter is built to be used with two hands ensuring maximum power.

Axes and hatchets are excellent and easily transportable tools, thanks to their small size, that can be used in many ways: cutting small trees, dissecting wood and carving and, in extreme cases, as personal defense.
The two new Fox models have blades forged in C45 steel, the handle in American walnut and are accompanied by leather sheaths made in Italy.

Intended Use: Hiking / Sporting

Production type: Industrial
Country of production: Italy
Blade: Carbon steel 1045 / C45
Blade treatment: Blackwashed
Handle: Hickory Wood (American Walnut)
Blade length: 11cm.
Blade thickness: 3.75cm.
Total length: 60cm.
Weight: 1520g.
Sheath: leather blade cover, made in Italy.
Package: cardboard box with Fox Knives logos
Notes: -

outdoor knife produced by Fox between the late nineties and 2004 - Sturdy and comfortable knife for camping and hiking use. This rare model is characterized by the coating of the blade with a titanium surface which technically increases the resistance to oxidation and to the thread holding. Complete with scabbard

Intended use: Sports

Blade: 440A stainless steel with titanium coating
Lama Italia production
Handle: pakkawood pledge
Blade length: 110mm.
Blade thickness: 4mm.
Closed length: 145mm.
Total length: 250mm.
Balancing: -
Weight: 285g.
Closure: Back Lock
Clip:
Sheath: Cordura sheath
Note: -

Intended use: Hiking / Hunting / Sports

Type of production: Industrial
Country of production: Maniago - Italy
Blade: Becut 57 / 58HRC stainless steel with very high resistance to oxidation and corrosion
Blade finish: Stonewashed
Handle: PP + TPE (polypropylene + thermobond)
Blade length: 110mm.
Blade thickness: 4mm.
Total length: 235mm.
Weight: 150g.
Sheath: nylon with leather insert, belt, vertical port
Packaging: Cardboard box with Fox Knives logos
Notes: Design by Jesper Voxnaes

Laguiole, which can be defined as the "capital" of the Aubrac, is a small town of about 900 inhabitants that became known all over the world for the traditional Laguiole knife.

The Laguiole knife, also known as a knife-corkscrew, loved by the best sommeliers in the world, is said to have evolved from the one used daily by the people of the region since the fourteenth century. It is said that they received it from their parents on the occasion of the First Communion, and used it with love for life as a friend, and as an "amulet".

The Laguiole knife refers to an older model called capuchadou, which the Aubrac breeders used every day since the fourteenth century. The farmers brought it with them, hung on their belts and used it to work wood, or to cut bread and cheese. It is said that, at the end of the working day, they put it on the ground, like a cross, to offer their evening prayer.

The current Laguiole knife, has its prototype in the one designed by Pierre-Jean Calmels, at the beginning of the nineteenth century. At the time, many Catalans lived in this region, used for deforestation or other jobs. They used a clasp knife, a curved blade called a navaja, and Calmels created a beautiful and functional instrument, fusing the traditional navaja and Laguiole knife, heir to the capuchadou. Still today, keeping the tradition, each Laguiole En Aubrac knife is handcrafted by Laguiole's artisans.

Intended use: Collection / Sports

Type of production: Artisan
Country of production: Laguiole, France
Blade: Sandvik 12C27 stainless steel
Blade treatment: Mirror polished
Handle: Tip of bovine horn
Blade length: 112mm.
Blade thickness: 3mm.
Length closed: 143mm.
Total length: 255mm.
Weight: 80g.
Opening: manual, two-handed
Closure: simple spring
Clip: -
Sheath: -
Notes: always accompany the blade during closing to prevent the thread from beating and ruining

Tommaso Rumici explains his knife: "Drawing the Octopus I wanted to create a knife that was versatile enough to be interesting for the various types of Fox customers: sporting, hunting and military, the result is, in my opinion, an excellent compromise between portability and performance: it will never be too big or heavy to have it with you in time of need. "

Intended use: Hunting / Sports

Type of production: Industrial
Country of production: Italy
Blade: full tang in stainless steel laminated SanMai 420J2 / VG10 to 60 / 62HRC
Blade treatment: Satin
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 4mm.
Total length: 240mm.
Balancing: -
Weight: 170g.
Sheath: in leather
Packaging: cardboard box with Fox logos
Notes: design by Tommaso Rumici

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: Cocobolo
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 140g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper Voxnaes

Intended use: Sports

Type of production: Industrial
Production Country: Italy
Blade: full tang stainless steel N690Co
Blade treatment: Satin finish
Handle: G10
Blade length: 110mm.
Blade thickness: 4mm.
Overall length: 220mm.
Balancing: -
Weight: 160g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: design by Jesper Voxnaes

Intended Use: Hunting / Utility

Type of production: Industrial
Production Country: Italy
Blade: Full Tang, stainless steel 1.4916 Buderus Nitro-B
Handle material: wood Bocote
Blade length: 105mm.
Blade thickness: 5mm.
Overall length: 225mm.
Balancing: back to 1cm
Weight: 176g.
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: -

Intended use: Tactical

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel 58HRC N690Co
Handle: Titanium
Blade length: 115mm.
Blade thickness: 4mm.
Length closed: 145mm.
Overall length: 247mm.
Thick when closed: 18mm.
Balancing: -
Weight: 186g.
Closure: Frame Lock
Clips: stainless steel
Sheath: -
Packaging: cardboard box with Fox logos and with Cordura sheath
Notes: -

Intended Use: Hunting Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58 / 60HRC
Handle: G10 Orange
Blade length: 115mm.
Blade thickness: 5mm.
Overall length: 225mm.
Balancing: advanced to 1 cm
Weight: 230g.
Closed: -
Clip: -
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: Design By Jesper Voxnaes

Intended Use: Hunting Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58 / 60HRC
Handle: Green Canvas Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Overall length: 225mm.
Balancing: advanced to 1 cm
Weight: 230g.
Closed: -
Clip: -
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: Design By Jesper Voxnaes

En Aubrac Laguiole - Laguiole d'autrefois in horn tip - knife collection

Intended use: Collection / Sports

Type of production: craft
Blade: Stainless steel 12C27
Production Blade: France
Handle: Horn Cattle Blonde
Blade length: 112mm.
Blade Thickness: 3mm.
Closed Length: 143mm.
Overall length: 255mm.
Balancing: -
Weight: 80g.
Closure: rear spring retention
Clip: -
Sheath: -
Notes: accompanied by presentation box and bag in cotton with logo Laguiole en Aubrac

Intended use: Sports / Tactical

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: Teflon coating
Handle: Micarta
Blade length: 115mm.
Blade thickness: 3.5mm.
Closed length: 140mm.
Total length: 255mm.
Thick when closed: 18mm.
Balancing: -
Weight: 204g.
Closure: Liner Lock with safety
Clip: in stainless steel
Sheath:-
Packaging: cardboard box with Fox logos
Notes: design by Citadel

Intended use: Sports

Type of production: Industrial
Production Lama: Italy
Blade: N690Co stainless steel
Blade treatment: -
Handle: Ziricote wood
Blade length: 115mm.
Blade thickness: 3.5mm.
Closed length: 140mm.
Total length: 255mm.
Thick when closed: 18mm.
Balancing: -
Weight: 204g.
Closure: Liner Lock with safety
Clip: in stainless steel
Sheath:-
Packaging: cardboard box with Fox logos
Notes: design by Citadel

Intended use: Tactical / Collection

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: DLC
Handle: G-10
Blade length: 110mm.
Blade thickness: 5mm.
Length closed: 137mm.
Total length: 245mm.
Thick when closed: 22mm.
Balancing: -
Weight: 246g.
Closure: Liner Lock
Clip: stainless steel
Sheath: -
Packaging: cardboard box with FKMD and Col Moschin logos
Notes: Wave opening system under the Emerson license

Intended use: Tactical / Military

Type of production: Industrial
Lama production: Italy
Blade: stainless steel N690Co
Lama treatment: DLC
Handle: G-10 with stainless steel liners
Blade length: 110mm.
Blade thickness: 4.5mm.
Length closed: 150mm.
Total length: 260mm.
Thick when closed: 20mm.
Balancing: -
Weight: 228g.
Closure: Liner Lock with safety lock
Clip: Removable in stainless steel
Sheath: Nylon Camouflage
Packaging: gray cardboard case with Fox logos
Notes: Knife currently supplied to the "Folgore Parachute Transmission Company" - Equipped with rear Skull Crasher and replaceable emergency harness

Intended use: Utility / Tactical

Type of production: Industrial
Country of production: Italy
Blade: In N690Co 58 / 60HRC stainless steel with Black Idroglider finish
Handle: Green Canvas Micarta
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced to 1cm
Weight: 190g.
Sheath: leather
Packaging: cardboard box with Fox logos
Note: -

Intended use: Hunting / Utility

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58 / 60HRC satin stainless steel
Handle: Rosewood
Blade length: 110mm.
Blade thickness: 5mm.
Total length: 230mm.
Balancing: advanced to 1cm
Weight: 190g.
Sheath: leather, with vertical belt port
Packaging: cardboard box with Fox logos
Note: -

Knife Withdrawn from Private Collection
Type: Previously Purchased
Condition: In good condition
Available in the market: No longer in production
Sharpening: Factory
Marks on the blade: Some marks
Marks on the handle: None
Box: NOT Present
Sheath: In kydex
Manuals, Certificates, and Warranties: NO
Checked and Certified by our internal laboratory
Intended Use: Tactical/Utility/Collection

Type of Production: Industrial
Blade: N690Co stainless steel 58/60HRC Full Tang
Blade Treatment: PVD
Blade Production: Italy
Handle: G10
Blade Length: 115mm.
Blade Thickness: 6mm.
Total Length: 255mm.
Balance: On the guard branch
Weight: 330g.
Sheath: Polymers with tech lock
Notes: Designed by Specwog Dean Rostohar