Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new, never used
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Absent
* Scabbard: Present, original, like new
* Manuals, Certificates and Warranties: No
* Checked and Certified by our in-house laboratory

Intended Use: Collecting/Hunting/Sporting

Production type: Midtech
Country of Production: USA
Blade: A2 55/57HRC steel
Blade Treatment: gunkote
Handle: A2 55/57HRC steel with alluminium screwed cap
Blade length: 108mm.
Blade thickness: 4mm.
Total length: 205mm.
Weight: 203g.
Sheath: Black leather
Packaging: -
Notes: knife withdrawn from private collection like new, lacks packaging and certificates

Intended use: Sport
Type of production: Industrial
Blade production: Italy
Blade: Uddeholm ELMAX SuperClean steel, HRC 59/61
Blade treatment: Dark stone washed
Handle: Canvas micarta green
Blade length: 108mm.
Blade thickness: 4.2mm.
Closed length: 143mm.
Total length: 253mm.
Closed thickness: 19mm.
Balancing: - Weight: 250g.
Closure: Back Lock with two wire springs
Clip: Tempered AISI420 steel with stonewashed treatment
Scabbard: -
Packaging: Cardboard box with Viper logos
Notes: Design by Fabrizio "Sylvester" Silvestrelli

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Use target: Neck Knife / Sportsman / Tactical

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN 55 / 57HRC
Surface treatment: PVD
Handle: Stainless steel CPM-S35VN 58 / 59HRC
Blade Length: 86mm.
Blade thickness: 4.2mm.
Total length: 184mm.
Weight: 85g.
Sheath: in Kydex, ultra-thin
Packing: white cardboard box with Chris Reeve logos, Warranty Certificates
Notes: Design by William W. Harsey

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose of use: Collection / Utility

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: PVD
Handle: Black Canvas Micarta
Blade Length: 150mm.
Blade thickness: 5.58mm.
Total length: 292mm.
Balance: on the lower guard branch
Weight: 329g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Purpose: Collection / Fighter

Type of production: semi-industrial
Country of production: Boise - Idaho - USA
Blade: Stainless steel CPM-S35VN at 55 / 57HRC
Surface treatment: Black PVD
Handle: Black Canvas Micarta
Blade Length: 180mm.
Blade thickness: 5.58mm.
Total Length: 315mm.
Balance: on the lower guard branch
Weight: 363g.
Sheath: Nylon thongs, compatible M.O.L.L.E.
Notes: New Version 2017 - Warranty and Authenticity Certificates - Design by William W. Harsey

Use: Light Utility

Type of production: Industrial
Production Country: Italy
Blade: Carbon steel D2 59 / 60HRC
Blade Treatment: Blackwash
Handle: Canvas Micarta
Blade length: 125mm.
Blade thickness: 5.8mm.
Overall length: 252mm.
Balancing: back 1cm
Weight: 280g.
Sheath: Nylon, compatible M.O.L.L.E. by Vega
Packaging: cardboard box with Viper and logos Tecnocut
Notes: Design by Tommaso Rumici

Chris Reeve - Mk IV 28 Year Commemorative knife

For 28 years, (the A2 round handled) One Piece Range of knives has been an essential part of Chris Reeve Knives. From Chris first designing the concept while serving in the South African Army in Namibia to today, these knives have been used, carried, admired and collected in all corners of the world.

An integral part of the success of this range has been Eddie Myers. Eddie was Chris's foreman when Chris was an apprentice tool and die maker. They have known each other more years than they care to count and Chris has always regarded Eddie as mentor, teacher, friend and consultant! For 25 years, Eddie has machined the blanks for our One Piece Knives. Still living in South Africa, Eddie and his wife Caroline, have provided fine service to deliver the best blanks at the best price. (There is no question that the volatility of the South African currency has helped over the years!)

Eddie and Caroline want to retire. Ed wants to buy a boat again and go fishing whenever he feels like it! This brought us to a cross-roads--do we try to source a vendor in the USA or should we simply retire a - Classic. We have decided to take the second choice--to discontinue the One Piece Range.

To celebrate the end of this era, Chris Reeve Knives offered a limited edition of 250 Commemorative Mk IVs. The Mk IV was the first iteration of the one piece concept to become known there is still call for this model which we initially discontinued in 1995. It has a 7 inch blade with a clip point and sawback. For this commemorative edition, the butt cap is engraved and polished and the sheath has a commemorative logo embossed.

Specifications

Blade Material: A2 tool steel
Blade Hardness: 55-57 RC
Blade Coating: KG Gun-Kote
Blade Length: 7" sawback blade
Blade Thickness: 0.187"
Overall Length: 12"
Handle Material: A2 Tool Steel
But Cap Material: D65S aluminum
Sheath: Leather with horizontal carry belt loop, Snap
Weight: 12.90 oz. (365 grams)
Limited Edition, only 250 pieces produced!
Handmade in the USA
One Piece Knife Concept

The idea of the one piece knife was born while Chris was serving time in the South African Army on the Namibia/Angola border in 1979. The experiences of military service have contributed substantially to the features in these knives.

Chris realized that the ideal working knife was a tool which was strong, reliable and impervious to temperature and humidity. Extensive time has been devoted to design, and research and development to improve both the blade designs and the methods used in making the knives.

Each knife is made from a solid billet of A2 tool steel. The stock removal method results in two distinct advantages--the strength/weight ratio is exceptional and there is no handle/blade join. This means that there is no area where the blade and handle could come apart--a weakness in the design of other hollow handle knives. The handle cavity is larger than that of any similar knife. The hollow handle is closed with a butt cap made of 6061 aluminum which screws into the handle against a Neoprene "O" ring, ensuring the cavity is sealed from dust and moisture. All the one piece knives are hardened to 55-57 RC and random checks are made to ensure accuracy. This hardness gives superb toughness, good edge retention and allows for efficient sharpening in the field. Each knife is coated with super hi-tech KG Gun-Koteä originally developed for use in the aerospace industry. This coating offers a durable, long-lasting, non-reflective covering. Included in the price of each knife is a hand-made leather sheath. A lifelong guarantee, signed by Chris accompanies each knife.
The one piece design offers the highest possible weight/strength ratio
A2 Tool Steel offers excellent edge retention and good shock resistance
Hardness at between 55 and 57 Rockwell C is not brittle but gives good edge retention along with ease of sharpening
An 8" hollow grind is used with a full thickness back edge. All designs are ground to allow the full thickness of the back edge to come as close to the point as possible, affording a very strong front tip but not restricting the knife's ability to pierce
The hollow handle, which is created to reduce weight, is larger than any similar sized knife because there is no join between handle and blade
The aluminum butt cap provides an airtight closure for the hollow handle and is designed so that it can be used for hammering. Because using the knife as a hammer can be dangerous to one's knuckles and fingers, we do not recommend that this be done unless in an emergency situation. It is preferable to use a hammer
Full depth precision machined knurling affords maximum non-slip grip
Non-reflective KG Gun-Koteä coating gives lasting protection
All knives carry a lifetime guarantee and a damaged knife will be replaced or repaired at Chris' discretion. This guarantee does not cover damage to a knife that has been thrown or used for heavy levering
These knives are used by hunters, backpackers, SWAT teams, military personnel, firefighters and police all over the world. They are also to be found in many knife collections and most of our customers own more than one of our knives
Each hand made leather sheath is designed to fit the knife well, to give maximum protection to the carrier and the knife when being carried. Because we continue to improve our design, sheaths supplied might not be exactly as shown in the brochure
Replacement butt caps and sheaths are available at reasonable prices
Many customers feel that once their knives have been used, they lose collector's value. This is not so as the knife can be returned to Chris Reeve Knives, where it will be sandblasted, re-coated with KG Gun-Kotea, sharpened and returned to it's original condition. Contact Chris Reeve Knives for cost. Please return knife in sheath

Raro coltello fuori serie realizzato nel 2009 da Chris Reeve.

Il nome Ubejane significa Rinoceronte nella lingua Zulu in South Africa.

Destinazione d'uso: Collezione/Caccia/Sportivo

Tipo di produzione: Semi-Artigianale
Produzione Lama: USA
Lama: In acciaio A2 55/57HRC
Trattamento Lama: black
Manicatura: Brown canvas Micarta
Lunghezza lama: 100mm.
Spessore lama: 5mm.
Lunghezza chiuso: -
Lunghezza totale: 230mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 312g.
Chiusura: -
Clip: -
Fodero: Cuoio nero
Confezione: Scatola di cartone bianca con loghi Chris Reeve; certificati di garanzia
Note: coltello fuori produzione dal 2011

Designed by the famous Danish designer Jesper Voxnaes, Odin is a lockable high-end housing architecture frame lock with rotation system of bearings and the use of noble materials and technology (full frame titanium cheek and carbon fiber, titanium or G-10). The unique style of Vox, is influenced by Scandinavian design that the American cutlery, the attention to detail and excellence of workmanship typical of a knife Viper create completely original and of high quality.

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Black
Handle: G10 and Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 100mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 130g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Designed by the famous Danish designer Jesper Voxnaes, Odin is a lockable high-end housing architecture frame lock with rotation system of bearings and the use of noble materials and technology (full frame titanium cheek and carbon fiber, titanium or G-10). The unique style of Vox, is influenced by Scandinavian design that the American cutlery, the attention to detail and excellence of workmanship typical of a knife Viper create completely original and of high quality.

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: Italy
Blade: Stainless steel N690Co 58 / 59HRC
Treatment Blade: Black
Handle: Titanium
Blade length: 75mm.
Blade thickness: 4mm.
Closed Length: 100mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 155g.
Closure: Frame Lock
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos Viper
Notes: Design by Jesper Voxnaes

Collini Cutlery is the official distributor for Italy of tactical knives / collection made in the USA Chris Reeve

Made at the Blade Show in 2014 in a limited edition of only 500 pieces worldwide, the impofu (eland antelope, Lungu in Zulu) is a fixed blade knife largest and most impressive ever produced by Chris Reeve.

Use: Collection / Heavy Utility

Type of production: semi-homemade
Blade: Stainless Steel Tool CPM-3V 58 / 60HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 254mm.
Blade Thickness: 6.8mm.
Length closed: -
Overall length: 413mm.
Balancing: Advanced
Weight: 573g.
Closed: -
Sheath: Black Leather by Gfeller Casemakers
Notes: Production limited to 500 pieces worldwide - Certificate of Authenticity and warranty

Viper - Maga 'PVD Orange G10 - V5914GO - knife

Intended use: Sport

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690 partially
Treatment Blade: PVD
Handle: G10 orange
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 124mm.
Overall length: 208mm.
Thick when closed: 15mm.
Balancing: -
Weight: 166g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Viper
Notes: Design by Boris Manasherov - instructor of Krav Maga '

Viper - Maga 'PVD Carbon Fiber - V5914SFC - knife

Intended use: Sport

Type of production: Industrial
Production Blade: Italy
Blade: stainless steel partially serrated N690
Treatment Blade: PVD
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 124mm.
Overall length: 208mm.
Thick when closed: 15mm.
Balancing: -
Weight: 154g.
Lock: Liner Lock
Clip: Stainless Steel
Sheath: -
Packaging: Cardboard box with logos Viper
Notes: Design by Boris Manasherov - instructor of Krav Maga '

Con il Free, disegnato da Moreno Franzin e da Tommaso Rumici, Viper ha stabilito un nuovo primato nel campo della sicurezza. Il nuovo sistema Smartlock, impiegato per la prima volta su questo chiudibile, risolve tutti i problemi che possono affliggere la classica architettura liner-lock. Inoltre, grazie al pratico cursore dorsale, l'utente pu scegliere di bloccare completamente la meccanica.

Destinazione d'uso: EDC/Sportivo

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio D2 a 58/60HRC
Trattamento Lama: PVD
Manicatura: G-10
Lunghezza lama: 86mm.
Spessore lama: 3.6mm.
Lunghezza chiuso: 120mm.
Lunghezza totale: 210mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 123g.
Chiusura: Liner Lock con sistema brevettato SmartLock
Clip: in acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Viper
Note: Design by Moreno Franzin e Tommaso Rumici

Chris Reeve - Green Beret 5.5 "- knife

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S30V 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 140mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 275mm.
Balance: on the branch of lower guard
Weight: 320g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty

The Collini Cutlery is official distributor for Italy of the tactical knives / collection made in USA Chris Reeve

Intended use: Fighter / Tactical

Type of production: Artisan
Blade: stainless steel CPM-S35VN 55 / 57HRC
Lama production: USA
Handle: Black Canvas Micarta
Blade length: 170mm.
Blade thickness: 5.8mm.
Length closed: -
Total length: 290mm.
Balancing: set back to 1cm. from the lower guard branch
Weight: 356g.
Closure: -
Clip: -
Sheath: by SpecOps, in cordura
Notes: single-piece knife from 2007 - production ranks

Winner of "American year knife" to Blade Show 2007.

The Pacific, born of the fruitful collaboration between Reeve and HARSEY is the civilian version of the model Green Beret created to celebrate the 50th Anniversary of "the 1st Special Forces Group" department that has operated in Asia and the Pacific; the name of the knife derives the operating environment of the department.

Intended use: Fighter / Utility Light
Type of production: semi-industrial
Blade: full tang CPM-S35VN Steel 55 / 57HRC with GunKote finish
Country of production: Idaho - USA
Handle: Black Canvas Micarta
Blade length: 150mm.
Blade Thickness: 5.8mm.
Overall length: 315mm.
Balance: on the lower part of the guard
Weight: 336g.
Sheath: Nylon, made in USA, with leg attacks and Type M.O.L.L.E.
Notes: Certificate of guarantee and authenticity

Tipo di produzione: Industriale
Paese di produzione: Italia
Lama: in acciaio inox N690
Trattamento Lama: PVD
Manicatura: Canvas Micarta
Lunghezza lama: 95mm.
Spessore lama: 3.5mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 210mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 126g.
Chiusura: liner lock
Clip: acciaio inox
Fodero: -
Confezione: scatola di cartone con loghi Viper
Note: Design by Fabrizio "Silvester" Silvestrelli

Viper - Tank - Black Aspis - VT4004BK - knife

Intended Use: Sport / Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless D2 to 58/59HRC
Treatment Blade: Aspis Coating
Handle: Canvas Micarta
Blade length: 155mm.
Blade thickness: 5.8mm.
Length closed: -
Overall length: 297mm.
Thick when closed: -
Balancing: -
Weight: 415g.
Closure: -
Clip: -
Sheath: Black Cordura, by Vega, with attacks SPRINGS
Packaging: Cardboard box, cover letter, certificates of warranty
Notes: Design by Thomas Rumici

Intended use: Collection / Allround / Fighter

Type of production: handmade
Blade: Stainless CPM-S35VN 55/57HRC
Production Lama USA
Handle: Black Canvas Micarta
Blade length: 180mm.
Blade Thickness: 5.8mm.
Length closed: -
Total length: 315mm.
Balance: on the branch of lower guard
Weight: 364g.
Closing: -
Clip: -
Sheath: Nylon SpecOps
Note: Certificates of authenticity and warranty