Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Knife withdrawn from a private collection - Limited edition production in Japanese CoS steel in SanMai dating back to 2018 and no longer available - In like new condition, no marks on the blade (never cut, never resharpened) or on the handle. Supplied with handmade Kydex sheath and Wander Tactical certificate - Checked and certified by our in-house Coltelleria Collini laboratory.

In collaboration with Wander Tactical we have decided to propose their new neck knife, the Raptor model, in an exclusive version with a satin blade that uses the famous Japanese San Mai steel produced by Takefu Steel. Specifically we used, for the central plate, the CoS at 61.5HRC (Cobalt Special, mechanically considered 25% higher than the already highly appreciated VG10) and the 420J2 (at 56 HRC) for the two side plates in order to guarantee a very high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, in Japanese laminated stainless steel (San Mai) with cutting edge in CoS at 61.5HRC with cryogenic hardening
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: in Kydex, thermoformed, with lanyard for Neck Knife use
Packaging: -
Notes: Each knife is unique and handcrafted

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side coating (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Use: Neck Knife / Collection

Type of production: Artisan
Production Lama: Italy
Blade: integral, D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes compared to the product photographed

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

RAPTOR model:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in brown kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Japanese steel blends with Italian excellence

For this 2019/2020 collaboration, exclusive of Collini Cutlery, we have decided to propose a series of best sellers produced by Wander Tactical. Knives made with the famous San Mai steel produced by the Japanese Takefu Steel. Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an easy regrinding. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of extrene steel and by the laminated structure.

RAPTOR model:

Use: Tactical / Utility

Type of production: Artisan
Production Lama: Italy
Blade: integral, laminated Japanese steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and SUS410 (stainless steel) external scales
Blade finish: satin finish
Handle: Paracord
Blade length: 75mm.
Blade thickness: 6.5mm.
Total length: 178mm.
Balancing: set back
Weight: 149g.
Sheath: in green kydex
Packaging: -
Notes: Each knife is unique and handcrafted - Wander Tactical certified

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting abilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer tool life

thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built on the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although the steel normally becomes harder after hardening, the side steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or with a damask pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

Use: Neck Knife / Collection

Type of production: Artisan
Lama production: Italy
Blade: integral, in D2 steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Total length: 180mm.
Balancing: set back
Weight: 130g.
Sheath: in Kydex, thermoformed, with cord for use with Neck Knife
Packaging: -
Notes: Each knife is unique and handcrafted; there may be slight differences in finishes, colors and materials compared to the photographed product

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang, D2 Steel
Blade treatment: Raw Finish
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical we decided to propose one of their most iconic knives, the Tryceratops model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Application: outdoor / hunting

Type of production: handmade
Production Country: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin
Handle: Micarta
Blade length: 70mm.
Blade thickness: 6.8mm.
Overall length: 130mm.
Balancing: backward
Weight: 210g.
Sheath: Kydex, thermoformed, with Tek-Lok system
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

Type of production: Artisan
Production Lama: Italy
Blade: D2 Steel 59 / 60HRC
Blade treatment: Raw Finish
Handle: Micarta
Blade length: 120mm.
Blade thickness: 6.5mm.
Overall length: 275mm.
Balancing: backward
Weight: 470g.
Sheath: Kydex, thermoformed
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with Wander Tactical we decided to propose their new neck knife, the Raptor, in an exclusive satin-blade version that uses the famous SanMai japanese steel produced by Takefu Steel. For the central plate we have chose the CoS with 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 with 56 HRC for the two side plates in order to ensure high cutting capacity but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Use: Neck Knife / Collection

Type of production: handmade
Production Country: Italy
Blade: Full tang with japanese laminated (SanMai) 61.5HRC CoS stainless steel with cryogenic temper
Blade treatment: Satin
Handle: Paracord
Blade length: 80mm.
Blade thickness: 6.5mm.
Overall length: 175mm.
Balancing: backward
Weight: 156g.
Sheath: Kydex, thermoformed, for use with lanyard Neck Knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: EDC / Light Utility / All Round

Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Paracord
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

In collaboration with "Wander Tactical" We decided to bring their EDC, the Scrambler model, in an exclusive satin-blade version that uses the famous Japanese Steel San Mai produced by Takefu Steel. Specifically, we used, for the central plate, the CoS to 61,5HRC (Cobalt Special, considered mechanically superior by 25% compared to the already much appreciated VG10) and 420J2 (56 HRC) for the two side plates in order to ensure high cutting capacity, but at the same time a remarkable resistance to abrasion, resilience and resistance to oxidation.

Occupation: EDC / Light Utility / All Round

Type of production: Custom
Country of production: Italy
Blade: Full, Japanese-rolled stainless steel (San Mai) with sharp CoS to 61,5HRC in cryogenic tempering
Blade treatment: Satin Raw
Handle: Paracord
Blade length: 82mm.
Blade thickness: 6.8mm.
Overall length: 200mm.
Balancing: backward
Weight: 215g.
Sheath: Kydex, compatible with tek-lok attacks (not supplied) or used as a neck knife
Packaging: -
Notes: Each knife is unique and handmade; may be slight of finishes, colors and material differences with respect to the photographed product.

The Tryceratops, small, compact and very robust, born from the idea of being able to have with him a knife reliable in different situations even with minimum dimensions. Very sharp, comfortable and easy to handle, the knife Tryceratops is a great demand from American hunters and field operators.

Intended Use: Tactical / Collection

Type of production: Custom
Country of Production: Italy
Blade: D2 Tool Steel 59/60HRC
Blade Treatment: OD Green
Handle: Black G10
Blade length: 65 mm.
Blade thickness: 5.5 mm.
Overall length: 132 mm.
Balancing: backward
Weight: 176 g.
Sheath: Custom maded OD Green Kydex with black leather loop
Packaging: -
Note: each knife is unique because it is hand maded, could therefore be small differences / inaccuracies respect to the model on pictures.