Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Boker Plus - ME 109 Damast knife - 01BO909DAM - knife
The Messerschmitt Bf 109 was built from 1935 onwards and, with a production of around 33,000 aircraft, is the most widely produced fighter aircraft in the history of aviation. Officially, the type designation Bf 109 was never changed, even after BFW was renamed Messerschmitt AG. However, since all aircraft types later developed by Messerschmitt were given the model abbreviation ME, the name ME 109 also became established in the public consciousness for the Bf 109. In the 1930s, it marked the step towards a new generation of low-wing fighter aircraft with a closed pilot's cockpit, retractable landing gear and an all-metal construction of wings and fuselage. This new structure withstood far greater loads than the fabric-covered tubular constructions that had been common up to then, which also had the disadvantage of immense air resistance due to the necessary transverse bracing. As a result, the Messerschmitt's more compact and stable design allowed higher speeds with tighter radii during the cornering and dive maneuvers so crucial to fighter pilots. The Bf 109 was armed with two 20 mm MG FF machine guns in the wings and two 7.92 mm MG 17 machine guns. The latter were mounted directly in front of the pilot and coupled via an interrupter gear to the propeller shaft of the 1,000 hp Daimler V12 engine. In this way it was possible for the MGs to fire through the circular path of the spinning propeller without the projectiles hitting the rotating propeller blades. The MGs were thus very close to the pilot's line of sight. The pilot's seat was steel-plated inside the fuselage area to protect it from enemy fire.
The steel we were able to obtain for our Damascus project came from an E-series Messerschmitt Bf 109 that was shot down by a Royal Airforce Supermarine Spitfire in 1940 during the Battle of Britain near the village of Ashford in the British county of Kent. The specific parts are the rear plate of the pilot's steel-plated seat and the bearing sleeve of the propeller shaft. These are forged by Chad Nichols into a high-carbon, high-cut 80-layer Damascus.
The Boker Plus ME 109 Damascus picks up numerous design elements of the legendary Messerschmitt. The opening at the back of the blade base has the unmistakable shape of the pilot's cockpit and is visible when the knife is closed and open. The folds in the sheet metal of the engine cowling as recesses for the barrel soul axles of the two MG 17s form the template for the schor at the tip of the blade. The flipper indicates a wheel of the retractable landing gear. For the front carbon fiber shell, the material Toxic Storm from the manufacturer Fatcarbon Materials was chosen in the colors green, black and yellow. The color scheme is based on the characteristic camouflage paint of the Bf 109 with greenish-gray undercoat and yellow front fuselage. The opposite side has a titanium framelock with an elaborately integrated carbide contact surface. A beautifully designed and elaborately integrated clip allows the Boker Plus ME 109 to be worn tip-up on the right. Supplied with a high-quality case for storage and a certificate of authenticity.
Intended use: Sports / collection
Type of production: Industrial
Country of production: Taiwan
Blade: Damascus steel
Blade finish: -
Handle: in carbon fiber and titanium
Blade length: 80mm.
Blade thickness: 3.6 mm.
Total length: 180mm.
Weight: 66 g.
Clip: in stainless steel, removable
Closure: frame lock
Packaging: cardboard box with Boker Plus logos, zip case, guarantee certificate
Notes: pinball opening on bearings01BO909DAM -
Boker Plus - Urban Trapper Premium G-10 Jade by Brad Zinker - 01BO614 - folding knife
Intended Use: Sporting / Collection
Production Type: Industrial
Country of manufacture: Taiwan
Blade: M390 stainless steel
Blade treatment: Black PVD
Handle: titanium and G-10 jade
Blade length: 90mm.
Blade thickness: 2.6mm.
Total length: 196mm.
Weight: 100g.
Clip: titanium, machined from billet
Locking mechanism: Framelock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Brad Zinker - Ball bearing opening systemBO-01BO614 -
Boker Arbolito - Esculta Micarta - 02BA593M - Knife
Intended Use: Hunting / Utility
Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finish: Satin finish
Handle: Micarta
Blade length: 145mm.
Blade thickness: 6.1mm.
Total length: 293mm.
Weight: 374g.
Scabbard: leather
Package: cardboard box with Boker logos
Notes: -BO-02BA593M -
Boker Plus - Urban Spillo Jade G10 - gentleman's knife - 01BO357 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: in 440C stainless steel
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 3mm.
Total length: 176mm.
Weight: 47g.
Clip: removable, in stainless steel
Closure: liner lock
Packaging: cardboard box with Boker Plus logos, nylon case with zip
Notes: pinball opening system on ball bearingsBO-01BO357 -
Boker Plus - Celos Slipjoint - G10 Jade - 01BO179 - knife
Intended Use: EDC/Gentleman
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 440C
Blade treatment: Satin finish
Handle: G10
Blade length: 67mm.
Blade thickness: 2.7mm.
Total lenght: 150mm.
Weight: 33g.
Closure: SlipJoint (without blade lock)
Clip: -
Sheath: -
Package: Cardboard box with Boker logos
Notes: -BO-01BO179 -
Boker Plus - Kwaiken Air Mini G10 Jade by Lucas Burnley - 01BO331 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 78mm.
Blade thickness: 2.5mm.
Total length: 183mm.
Weight: 60g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening systemBO-01BO331 -
Boker Plus - Kwaiken Air G10 Jade by Lucas Burnley - 01BO343 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel VG10
Blade treatment: black coating
Handle: steel liners and jade G10 grips
Blade length: 90mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Weight: 82g.
Clip: removable, stainless steel
Closure: liner lock
Package: cardboard box with Boker Plus logos, nylon case with zipper
Notes: Design by Lucas Burnley - ball bearing flipper opening systemBO-01BO343 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Gerber - LMF II Infantry Verde - 1626 - Cuchillo
Gerber - LMF II Infantry Verde - 1626 - Cuchillo
Después de dos años de colaboración con el instructor militar experto Frank Heyl el Gerber se complace en llevar al mercado lo que definen como el más resistente de los cuchillos militares / de supervivencia como nunca cuchillo costruiti.Il es , de hecho, diseñado no sólo para ser extremadamente ágil y cambios rápidos en agarre , pero también lo suficientemente resistente como para perforar el fuselaje de un avión, pero también simplemente ser utilizados como un martillo , frangivetri o cuchillo de lanzamiento .
Uso previsto : Military
Tipo de producción : industrial
Hoja: Acero inoxidable 12C27
Tratamiento de la hoja: TiNi - nitruro de titanio
Producción Lama EE.UU.
Material del mango : fibra de vidrio antideslizante y nylon
Longitud de la hoja : 125mm .
Espesor de la hoja : 4 mm .
Longitud cerrado : -
Longitud total: 275mm .
Balance: hacia atrás 3cm .
Peso: 330 g .
Cierre: -
Clip -
Funda: Nylon y resistente al fuego polímeros desliz , múltiples ataques SPRINGS sistema , ultra -delgado para limitar las dimensiones generales , integrado afilador
Notas : Skullcrasher / Martillo en acero inoxidable y los orificios para la correa de muñeca o para ser utilizado con un poste para crear una lanza .5738G -
Boker Arbolito - El Gigante Micarta - 02BA595M - Knife
Intended Use: Hunting / Utility
Production type: Industrial
Country of Production: Argentina
Blade: ful tang in stainless steel N695Co 58HRC
Blade finishing: Satin finish
Handle: Micarta
Blade length: 236mm.
Blade thickness: 6.2mm.
Total length: 379mm.
Weight: 445g.
Sheath: leather
Package: cardboard box with Boker logos
Notes: -BO-02BA595M -
Boker Plus - Kwaiken Folder by Lucas Burnley - 01BO291 - folding knife
Intended use: Sports
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8
Blade treatment: stonewashed
Handle: Steel liners, bolsters with green micarta
Blade length: 90mm.
Blade thickness: 3.2mm.
Overall length: 213mm.
Weight: 118g.
Clips: stainless steel
Lock: liner lock
Packaging: cardboard box with Boker Plus logos
Notes: Design by Lucas Burnley - opening system IKBS on ball bearingsBO-01BO291 -
Boker Plus - Subcom Folder - 01BO594 - knife
Boker Plus - Subcom Folder - 01BO594 - knife
Intended use: Sport
Blade: steel AUS-8 stainless partially serrated Black
Handle material: stainless steel and Zytel
Blade length: 55mm.
Blade Thickness: 2mm.
Closed Length: 68mm.
Overall length: 117mm.
Balancing: -
Weight: 74g.
Lock: Frame Lock
Clip: removable and reversible stainless steel
Sheath: -
Notes: -BO-01BO594 -
Ka-Bar - Zombie Killer Chop Stick - 02-5704 - coltelli
Destinazione d'uso: collezione/sportivo
Tipo di produzione: industriale
Lama: in acciaio al carbonio SK-5
Trattamento Lama: teflonata
Manicatura: Forprene
Lunghezza lama: 230mm.
Spessore della lama: 5.5mm.
Lunghezza chiuso: -
Lunghezza totale: 370mm.
Bilanciatura: avanzata di 4cm dalla guardia
Peso: 568g.
Chiusura: -
Clip: -
Fodero: tattico in Cordura
Note: Coltello fisso di backup scheletrato, modello Ka-Bar Acheron, che trova spazio nella tasca frontale del fodero. Il coltello fornito con paracord di colore verde acido e di due guancette intercambiabili di colore nero5695 -
Fantoni - Hide Fixed Micarta - Design by T. Rumici
Nuova versione 2014, ora con fodero più compatto e robusto e con attacchi di tipo Tek-Lok
Destinazione d'uso: Fighter/Tattico/Collezione
Tipo di produzione: industriale
Lama: in acciaio inox CPM-S30V a 61-62HRC
Trattamento Lama: Stone Washed
Produzione Lama: Italia
Manicatura: Micarta tipo Loveless
Lunghezza lama: 80mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata ad 1cm. dal ramo di guardia inferiore
Peso: 69g.
Chiusura: -
Clip: in acciaio
Fodero: in Kydex, con attacco tipo Tek-Lok
Note: Design by T. Rumici7280S -
Fantoni - Hide Folder Micarta - Design by T. Rumici knife
Fantoni - Hide Folder Micarta - Design by T. Rumici knife
Intended use: Fighter / Tactical / Collection
Type of production: industrial
Blade: Stainless Steel CPM-S30V 61-62HRC
Treatment Blade: Stone-Washed
Production Blade: Italy
Handle: Micarta Loveless
Blade length: 75mm.
Blade Thickness: 3.2 mm.
Closed Length: 102mm.
Overall length: 178mm.
Balancing: -
Weight: 102g.
Closure: Back Lock
Clip: Reversible, Stainless Steel
Notes: Design by T. Rumici and M. Fantoni7282 -
Gerber - Prodigy Tanto Urban Camo 0558 - coltello
Destinazione d'uso: Militare
Tipo di produzione: industriale
Lama: in acciaio inox 12C27 punta tanto
Trattamento Lama: TiNi - Nitrurazione al Titanio
Produzione Lama: USA
Manicatura: antiscivolo in fiberglass e nylon
Lunghezza lama: 120mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata di 1cm.
Peso: 205g.
Fodero: in Nylon e polimeri antiscivolo fire retardant, camo
Note: Skullcrasher/Martello4616T -
Ka-Bar - Impact Serie Large Spear/Eagle - 02-1461 coltello
Destinazione d'uso: tattico/militare
Tipo di produzione: industriale
Provenienza Lama: USA
Lama: in acciaio D2
Trattamento Lama: teflonatura
Manicatura: micarta
Lunghezza lama: 110mm.
Spessore della lama: 4mm.
Lunghezza chiuso: -
Lunghezza totale: 245mm.
Bilanciatura: arretrata a 2cm
Peso: 240g.
Chiusura: -
Fodero: cordura
Note: -5688