Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

Intended Use: Sporting / Tactical

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690 59/60HRC
Blade finish: Acid Stonewashed
Handle: FRN
Blade Length: 97mm.
Blade thickness: 4mm.
Length closed: 103m.
Total length: 190mm.
Thickness when closed: 18mm.
Weight: 135g.
Closure: Liner Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Fox Knives logos 
Notes: Flipper-type opening on ball bearings - Design by Jesper Voxnaes - Acid etching on the blade restores an already "worn" aesthetic appearance and each individual knife may have different finishes/colors/shades than the product in the pictures.

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In like new condition
* Commercially available: NO
* Sharpening: factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present and complete
* Scabbard: present
* Manuals, Certificates and Guarantees: -
* Checked and Certified by our internal laboratory

Intended use: Survival/Utlity

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade treatment: Satin finish
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Total length: 320mm.
Balancing: Advanced to 3cm. from the guard branch
Weight: 370g.
Sheath: in Nylon with removable survival kit
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

The survival kit contains:
* water container
* nylon strap
* mini compass
* candle
* Flint
* wire saw
* fishing kit
* multi-tools
* matches
* needle and thread kit
* razor blade
* emergency whistle
* copper wire
* SOS mirror
* pencil
* fluorescent light stick

Intended Use: Survival / Utlity / Collection

Production type: Industrial
Country of manufacture: Italy
Blade: Japanese rolled steel (San Mai) with V-Toku2 (carbon) cutting edge at 62/63HRC and SUS410 (stainless) outer cheeks
Blade treatment: Satin finish
Handle: Forprene
Blade length: 175mm.
Blade thickness: 6mm.
Total length: 300mm.
Weight: 365g.
Sheath: nylon, M.O.L.L.E. compatible.
Packaging: cardboard box with Fox logos
Notes: -

Japanese steel merges with Italian excellence.

For this new collaboration, between Coltelleria Collini of Busto Arsizio and Fox of Maniago, we chose the Rimor model. Only 9 exclusive pieces of this excellent bushcraft knife produced by Fox of Maniago have been made, using for this edition the Japanese V-Toku2 steel in 5mm Sanmai produced by the Japanese Takefu Steel instead of the Niolox used in the standard model. 

Specifically, the central sheet is the carbonaceous V-Toku2 at 62/63HRC and on the outer cheeks there is the stainless SUS410, so as to ensure not only a beautiful aesthetic effect, but also a very high cutting capacity, penetration and edge retention along with easy resharpening and maintenance. At the same time, the blade has remarkable corrosion resistance and an important increase in resilience given by the type of extreme steel and laminated structure.

Japanese steel blends with Italian excellence

For this 2021 collaboration, between the Collini Cutlery of Busto Arsizio and the Fox of Maniago, we have decided to propose the 609OD Bushman model, an excellent bushcraft knife produced by Fox of Maniago, using Japanese V-Toku2 steel in Sanmai. produced by Japanese Takefu Steel instead of the D2 used in the production model.

Specifically, we used V-Toku2 carbonaceous at 62 / 63HRC for the central plate and SUS410 stainless steel for the two external plates, in order to guarantee a very high cutting capacity, penetration and sealing of the wire together with an ease of re-sharpening. and maintenance but at the same time the blade has a remarkable resistance to corrosion and an important increase in resilience given by the type of external steel and by the laminated structure.

Technical features

Intended use: bushcraft - outdoor - collection
Type of production: Industrial
Production Lama: Italy
Blade: fulltang, in Japanese laminated steel (San Mai) with V-Toku2 (carbonaceous) cutting edge at 62 / 63HRC and external SUS410 (stainless steel) scales
Blade treatment: satin
Handle: micarta
Blade length: 160mm.
Blade thickness: 5mm.
Total length: 290mm.
Thick when closed: -
Balancing: advanced
Weight: 369g.

Sheath: in leather, belt, ambidextrous, for horizontal or vertical carrying
Packaging: cardboard box with Fox logos
Bevel: flat with scandi-like sharpening, convex
Notes: Special and limited edition - since the cutting edge is made of carbon steel it is advisable, in order to keep the blade in perfect condition, to protect the edge with a light surface of oil.

As in the ancient Japanese Samurai swords.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

Characteristics of San Mai steel: These are different types of metals bonded together to create a composite that encloses and intensifies the strengths of the metals individually taken:

- Longer life of the cutting edge
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the principle of Japanese swords, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, at the galvanic level, a structure that improves the corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after hardening, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

For more information: collinisteel

With this exclusive edition of Coltelleria Collini in collaboration with Fox, it was decided to combine a Japanese model such as the Core with a Japanese powder steel (sintered) and laminated (SanMai) by Japanese Takefu Steel.

For this project we have chosen to use Super Gold2 (SPG2) steel at 62 / 63HRC for the cutting edge of the blade in order to guarantee exceptional cutting performance and duration of sharpening, while ensuring at the same time a remarkable resilience and resistance to oxidation. given by the blade lamination process.

Intended use: Sports / Collection

Type of production: Industrial
Country of production: Italy
Blade: Japanese laminated stainless steel (San Mai) with sintered cutting edge in SPG2 at 62 / 63HRC
Blade treatment: satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 4mm.
Closed length: 103m.
Total length: 188mm.
Thick when closed: 18mm
Weight: 135g.
Closure: Liner Lock
Clip: in steel
Sheath: -
Packaging: Cardboard box with Fox Knives logos
Notes: Opening by Carson Flipper system - Movement on ball bearings - Design by Jesper Voxnaes - Exclusive version Collini Cutlery, Sprint Run, with Japanese stainless steel by Takefu Steel SPG2 Laminate.

The rolled steel - imported into Italy by Collini Steel directly from the Japanese Takefu Steel - is based on the ancient Japanese tradition in the creation of the famous Samurai swords. In fact, as early as 1100 the expert Japanese blacksmiths combined different materials together to give the Katana swords incredible cutting capabilities combined with a resistance and flexibility previously unknown. It is thanks to this revolutionary construction technique that Samurai swords have been preserved to this day, becoming one of the most fascinating objects made by man. Following this tradition applied to modern metallurgy, today we are able to have technologically advanced steels already tested and used in cutlery also by famous brands such as Fallkniven, Cold Steel, Mcusta, Kai, Sog, Zwilling, Rockstead, etc.

- Longer tool life
thanks to the use of very high quality steels with high carbon content (VG10, CoS, Shiro) or sintered (SPG2), in the heart of the sheet (Core Steel), the blade, once hardened, achieves decidedly hardness and cutting performance higher than those achieved with the use of traditional steels.

- Greater resilience
built with the Japanese sword principle, multilayer steel is difficult to break thanks to the toughness of the central steel (Core Steel) and the elasticity of the steel used for the side facing (Stainless Steel).

- Better corrosion resistance
the steel used for the external layers (Stainless Steel) guarantees the blade a high resistance to corrosion. The combination of the two or more materials used by Takefu Steel generates, on a galvanic level, a structure that improves corrosion resistance even on the wire.

- Easy processing even after heat treatment
although steel normally becomes harder after quenching, the lateral steel used in multilayer processing does not lose its softness and allows easy processing, drilling or welding even after heat treatment. For an optimal performance of the blade, cryogenic treatment is recommended.

- Improvement of the aesthetic result
The knives made with multi-state steel or damascus pattern at the end of the processing are aesthetically elegant, refined and highly appreciated by collectors all over the world.

Nicolai Lilin, a Russian writer, of Siberian origin, designed  Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped  merchantile ship   that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.

Intended use: sports collection

Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin

Intended use: Hiking

Type of production: Industrial
Country of production: Italy
Blade: full tang in steel 440
Blade treatment: -
Handle: Micarta
Blade length: 155mm.
Blade thickness: 4mm.
Total length: 285mm.
Balancing: on the guard branch
Weight: 258g.
Sheath: leather, belt, ambidextrous, for vertical port
Packaging: cardboard box with Fox logos
Note: -

Type of production: Industrial

Country of production: Italy
Blade: Steel D2 59 / 61HRC
Blade treatment: -
Handle: G10 Green
Blade width: 220mm.
Blade thickness: 6mm.
Total length: 340 mm
Weight: 865 gr
Sheath: Kydex with M.O.L.L.E.
Packaging: cardboard box with Maserin logos
Design: Design by Alessandro Zanin

Intended use: Survival / utlity

Type of production: Industrial
Production Country: Italy
Blade: Stainless Steel N690Co
Blade treatment: Satin finish
Handle: Forprene
Blade length: 190mm.
Blade thickness: 5mm.
Overall length: 320mm.
Balancing: Advanced to 3cm. by guard branch
Weight: 370g.
Sheath: Nylon
Packaging: cardboard box with Fox logos
Notes: designed and developed in collaboration with Alfredo Doricchi

Intended use:Survival/utlity

Type of production: Industrial
Production Lama: Italy
Blade: Stainless Steel N690Co
Treatment Blade: Stonewashed
Handle: Green G10
Blade length: 150mm.
Blade thickness: 5mm.
Overall length: 226mm.
Balancing: Set back to 1.5cm. the branch of the guard
Weight: 218g. (418g. Sheath)
Sheath: Nylon, MOLLE compatible
Packaging: Cardboard box with logos Maserin
Notes: designed by Nicolai Lilin

Intended Use: Hunting Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58 / 60HRC
Handle: Green Canvas Micarta
Blade length: 115mm.
Blade thickness: 5mm.
Overall length: 225mm.
Balancing: advanced to 1 cm
Weight: 230g.
Closed: -
Clip: -
Sheath: Leather
Packaging: cardboard box with Fox logos
Notes: Design By Jesper Voxnaes

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present, original, but damaged
* Scabbard: Present, original, like new.
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our in-house laboratory



WP4 Rough Wolf is a knife researched and designed by chief instructor Paolo Bozzo of Wolfpack Survival Training (survival and survival school). This design was developed through years of direct experience in the field and further improves on the STF-3 model previously made in collaboration with Fox FKMD

Intended Use: Survival/Utlity

Production type: Industrial
Country of Production: Italy
Blade: Stainless Steel N690Co
Blade Finish: Black Stonewashed
Handle: Green G10
Blade Length: 190mm.
Blade thickness: 5.8mm.
Total Length: 320mm.
Balance: Advanced to 3cm. from guard branch
Weight: 566g. (772g. with scabbard)
Sheath: by Radar, in Kydex with multi-position Keyblock attachment
Packaging: cardboard box with Wolfpack Survival logos
Notes: designed by Paolo Bozzo




Dear Friend,
I am Paolo Bozzo and many times ml have found myself in unpleasant, pericolase and difficult situations. Designing a knife and testing it just a few afternoons in the woods is quite different than designing one trying to solve all those survival problems I have encountered in the last 25 years, both In ltaly and abroad. Mud, water, dirt, grease, blood, fatigue, night use, weak hand, limited space, trajectories, physical deficits, heat, cold, transportation, speed and much, much more...these are just some of the tests a good design must pass.

Here are some of the reasons for the WF4 Rough Wolf design.

1. Balance: it is fondamenlal that the center of gravity is shifted forward. beyond the heel, such that it decreases, i.e., saves energy when delivering the blow. one must always have the feeling that the knife falls forward.

2. Beating mass: 65% of the weight of the whole knife is between the first and second 3rd of the blade, giving maximum beating capacity in penetrating.

3. Cutting edge: due to the main core in the shape of an esse. the cutting edge is lower than the fingers of the handle, with the result that in the dynamics of the fendenle and biomechanics of the arm, the force expressed is never attenuated; especially never before the impact of the same on the object to be cut.

4. Blade height: compared to other blades, it has a significantly higher ability to dig holes.

s. Handling: excellent the ability to use the Wp4 for both coarse and precision work, this thanks to the ability to put the hand before the guard, giving absolute mastery of the blade despite its size. This is thanks to the large heel where the index finger can be inserted and the convenient thumb rest. It is also possible to do this while wearing tactical gloves.

6. Back: the inclination is reversed for 2 reasons; 1st to give forward beating mass, 2nd not to stress the wrist during use as chopping, a normal knife arrives at an angle on the object, devastating the point of impact being slight in thickness. This can only be avoided by straining the thumb-side wrist to tilt so that the back of the knife falls perpendicular on the object. The wp4 does not have this problem; it does not stress the wrist because the back of the blade already falls perpendicular to the object to be beaten.

7. Bevel: it is very high, has impressive penetration capacity.

8. Milling cutter: 5 millings placed on the blade plane for holding the knife with two hands when handling animal hides or for special uses during bushcrafting.

9. Grip: it is designed to decrease the possibility of losing the blade and avoid opening of the phalanges during pmlong use or in situations of prolonged physical deficit. Improved, anti-slip grip with internally concave Gauntlets to accommodate a Micro SurvivalKit.

As for the scabbard, I believe it is as important as the blade. I proceeded to design it and recommend its qualities; the main feature I wanted to put in designing it was the multi-positioning of the same: in particular, placing it at will on one's body or equipment facilitates the possibility of use.

This quality is particularly appreciated by military personnel, who are known to have special technical and logistical needs. For this purpose we have used in addition to Kydex the Keyblock closure, as well as the many holes along the perimeter; also safe for airdrop it has the possibility of use and positioning by both Right and Left handed operators.

PAUL BOZZO

Intended Use: Tactical

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel 58HRC N690Co
Handle: micarta
Blade length: 87mm.
Blade thickness: 3.5mm.
Closed Length: 120mm.
Total length: 208mm.
Thick when closed: 19mm.
Balance: -
Weight: 180g.
Closure: Back Lock
Clips: stainless steel
Sheath: Black leather
Packaging: cardboard box with Fox logos
Notes: -

Intended Use: Tactical / Utilities / Collection

Type of production: industrial
Blade: 440C stainless steel Full Tang 58/60HRC
Lama treatment: sandblasting
Production Blade: Italy
Handle: micarta
Blade length: 140mm.
Blade Thickness: 4mm.
Total length: 250mm.
Balance: on the branch guard
Weight: 188g.
Sheath: Cordura with soft attacks
Notes:

Fox - FX-G2DC - The Predator - Desert Camo Tanto - Knife

Intended Use: Sport / Tactical / Military

Blade: Stainless steel N690Co 58/60HRC
Handle: removable Forprene
Blade length: 180mm.
Blade thickness: 6mm.
Closed Length: - mm.
Total length: 295mm.
Balance: -
Weight: 298g.
Closing: -
Clip: -
Sheath: Cordura and ballistic rubber sheath with leg attachment to extra for a folding knife
WARNING: the color of the sheath varies depending on the availability / choice of production company: [email protected] or 0331-632686 for additional info.
Notes: -

Fox - Pro Hunter - Folder Micarta - FX-130MGT knife

Intended usage: Utility

Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co 58/60HRC
Treatment Blade: Black Teflon
Handle: Green Canvas Micarta
Blade length: 100mm.
Blade thickness: 5mm.
Closed Length: 130mm.
Overall Length: 220mm.
Thick when closed: 22mm.
Balance: -
Weight: 200g.
Lock: Liner Lock
Clip: -
Sheath: Black leather
Packaging: cardboard box with Fox logos
Notes: -

Maserin - Starlight Folder G10 Green - Design by Puddu - 392G10V

Intended use: sporty / gentleman

Type of production: industrial
Production Blade: Italy
Blade: AUS-8 stainless steel
Treatment Blade: satin
Handle material: G10 Green
Blade length: 78mm.
Blade Thickness: 2.5mm.
Closed Length: 100mm.
Total length: 175mm.
Thick when closed: 10mm.
Balance: -
Weight: 74g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: Design by Puddu