Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
MKM - Isonzo Hawkbill by Vox - M390 & Marble Carbon Fiber - FX03M-1CM - knife
Small and compact, but of impetuous personality, with its jerks, curves and counter-curves, Isonzo is inspired by the magnificent river that bursts through the gates of the Eastern Alps.
The blade is made of Bohler M390 satin-finished steel, with an hawkbill tip. Handle is marbled carbon fiber with reversible stainless steel clip. Spacer in blue anodized titanium, ring on center screw in blue anodized titanium stainless steel. Opening system is with flipper or thumb hole. Sold with 6/8 torx key and Cordura sheath with zipper and belt loop.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: M390 58/60HRC stainless steel
Blade finish: Satin finish
Handle: Marbled carbon fiber with blue anodized titanium spacer and screw pin
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 87m.
Total length: 145mm.
Thickness when closed: 13mm
Weight: 70g.
Security system: Liner Lock
Opening system: on ball bearings
Clip: stainless steel, flush, removable and reversible
Packaging: Cardboard box with MKM Maniago Knife Makers logos - Nylon pouch with Zip
Notes: Design by Jesper VoxnaesMK-FX03M-1CM -
MKM - Vincent by Vox - Top Shield N690Co & Black G10 - VCN-GBB - knife
The blade shapes of this new folding knife designed by Jesper Voxnaes are reminiscent of ancient times when pirates sailed the seas with their precious swords at their side, maestone and ready to accomplish any task! The blade is BOHLER N690Co with black Black Top Shield cover and G10 handle for the best possible grip.
Intended Use: Sporting
Type of production: Industrial
Country of manufacture: Italy
Blade: N690Co 58/60HRC stainless steel
Blade treatment: Black Top Shield
Handle: G10, with embedded stainless steel liners and anodized aluminum spacer
Blade length: 62mm.
Blade thickness: 3.2mm.
Length closed: 106mm.
Total length: 175mm.
Thickness when closed: 13mm.
Weight: 100g.
Closure: LinerLock
Clip: stainless steel, removable and reversible
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jesper VOX VoxnaesMK-VCN-GBB -
MKM - Maximo Flipper Knife Design by Bob Terzuola - Black Micarta - MK-MM-BCT - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Stainless steel M390 60/61HRC
Blade treatment: stonewashed
Handle: canvas micarta and titanium grips, titanium spacers and screws
Blade length: 86mm.
Blade thickness: 4mm.
Weight: 116g.
Length when closed: 115mm.
Total length: 197mm.
Locking mechanism: Framelock
Clip: titanium, removable, deep pocket type.
Sheath: Synthetic material pouch with zipper closure and belt loop
Package: Cardboard box with MKM Maniago Knife Makers logos
Notes: Tungsten carbide rear glass breaker - Design by Bob TerzuolaMK-MM-BCT -
MKM - Goccia Flipper by Jens Anso - Dark Stonewashed Titanium - MK-GC-TDSW - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, Water, which in 1453 moved the hammers to forge the first blades and which has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade Treatment: Dark Stonewashed
Handle: Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 15mm
Weight: 135g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-TDSW -
MKM - Goccia Flipper by Jens Anso - Black G10 - MK-GC-GBK - knife
GOCCIA packs a sleek look into a sturdy frame with incredible ergonomics.
With this design by Jens Anso we would like to pay homage to one of the essential elements that gave rise to the production of knives in Maniago, the water, which in 1453 moved the hammers to forge the first blades and that has guided the evolution of our craft tradition. The concentric ellipses worked in 3D on the handle recall the ripples created by a drop falling into the water, forms and moments of liquid energy: origin and propagation of water.
Intended Use: Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel M360 61HRC
Blade treatment: satin finish
Handle: G10, with stainless steel embedded liners and anodized titanium spacer
Blade length: 85mm.
Blade thickness: 4mm.
Length closed: 115mm.
Total lenght: 200mm.
Thickness when closed: 15mm
Weight: 110g.
Closure: LinerLock
Clip: anodized titanium, deep pocket, removable
Sheath: Nylon pouch with zipper
Packaging: cardboard box with MKM logos
Notes: Design by Jens AnsoMK-GC-GBK -
Gerber - Key Note Flipper - Satin & Black - 30-001691 - knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 7Cr17Mov stainless steel
Blade treatment: Satin finish
Handle: Aluminum
Blade length: 25.4mm.
Blade thickness: 3.8mm.
Length closed: 50.8mm.
Total length: 76.2mm.
Weight: 66g.
Closing: Liner Lock
Clip: stainless steel
Packaging: cardboard box with Gerber logos
Notes: Opening via Carson Flipper systemG30-001691 -
MKM - Isonzo Hawkbill knife black by Vox - MK-FX03-1PBK - knife
Small and compact, but with an impetuous personality, with its shots, with its curves and counter-curves, Isonzo is inspired by the magnificent river that breaks into the gates of the eastern Alps - Knife made by Fox
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690 59 / 60HRC
Blade treatment: Black
Handle: FRN
Blade length: 55mm.
Blade thickness: 3mm.
Length closed: 85m.
Total length: 141mm.
Thick when closed: 18mm
Weight: 60g.
Closure: Liner Lock
Opening system: Carson Flipper system with ball bearing rotation mechanism
Spacer: in anodised aluminum
Clip: in steel
Sheath: -
Packaging: Cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Jesper VoxnaesMK-FX03-1PBK -
MKM - Arvenis knife - Carbon and Titanium - MK FX01-MCT - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Handle: front of marbled carbon fiber with titanium insert Gr. 5 Ti6AI4V, rear in titanium Gr. 5 Ti6Al4V, all worked in 3D
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 112g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperMK-FX01-MCT -
MKM - Clap by Bob Terzuola - titanium and G10 - MKLS01-GTBK - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips and titanium braces
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-GTBK -
MKM & Viper - Timavo Flipper by Vox - Black G10 - VP02-GBK - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Satin finish
Handle: Stainless steel and G10
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 111g.
Closing: Liner Lock
Clip: stainless steel, flush
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-GBK -
MKM & Viper - Timavo Flipper by Vox - Blackwashed Titanium - VP02-TDSW - knife
A rippled surface, a wide loop, the crest of a wave: with its clear and harmoniously multifaceted design, Timavo suggests the multiple forms of flowing. - Knife made by Viper
Intended use: Sports
Type of production: Industrial
Country of production: Italy
Blade: M390 58 / 60HRC stainless steel
Blade treatment: Blackwash
Handle: Titanium Gr. 5 Ti6AI4V Blackwashed
Blade length: 68mm.
Blade thickness: 3mm.
Total length: 183mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM Maniago Knife Makers logos
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-VP02-TDSW -
MKM & LionSteel - Colvera Flipper by Vox - G10 Black and Titanium - LS02-GTBK - knife
Colvera is the stream that moves the hammers of the city of Maniago from the fifteenth century. A knife dedicated to the energy of our origins, which combines the sign of a wave with an archaic compact form. - Knife made by LionSteel
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 58 / 60HRC
Blade treatment: Satin finish
Handle: Titanium Gr. 5 Ti6AI4V with 3D numerical control processing and G10
Blade length: 76mm.
Blade thickness: 4mm.
Total length: 179mm.
Thick when closed: 12mm.
Weight: 98g.
Closure: Frame Lock with steel leaf
Clip: titanium, machined from solid
Packaging: nylon pouch with zip and cardboard box with MKM logos Maniago Knife Makers
Notes: Carson Flipper opening system on ball bearings - Design by Jesper VoxnaesMK-LS02-GTBK -
MKM - Arvenis knife - G10 and aluminum - MKFX01-MG-GY - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: black G10 grips
Blade length: 84mm.
Total length: 203mm.
Blade thickness: 4mm.
Weight: 130g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Knife manufactured by ViperFX01-MG-GY -
MKM - Clap by Bob Terzuola - carbon fiber - MK-LS01-C - knife
Folding knife made by Lion Steel with BÖHLER M390 MICROCLEAN satin steel blade, opening with removable pinball and two-handed opening nail, rotation mechanism with ball bearings. Stainless steel liner lock, spacer and solid anodized titanium blue clip, stainless steel screws with anodized blue titanium rotating pin. Available in eight versions that differ in the materials used for the handle: carbon fiber, black G10, olive wood, Santos wood. For each of these materials, versions with or without titanium plates are available.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: satin
Grip: carbon fiber grips
Blade length: 76mm.
Blade thickness: 3.5mm.
Weight: 107g.
Opening: Carson Flipper system rotation mechanism with ball bearings
Washers: in steel and bronze, with ball bearings
Closure: Liner Lock
Clip: titanium, removable
Sheath: synthetic case with zip and strap
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Bob Terzuola - Knife manufactured by Lion SteelMK-LS01-C -
MKM - Raut by Burnley - carbon fiber - MKVP01-CB - knife
Folding knife made by Viper, with BÖHLER M390 MICROCLEAN steel blade, stonewash finish, Fliipper opening system, rotation mechanism with ball bearings. Hybrid locking system, hidden and elegant like a liner lock and at the same time thick and resistant as a frame lock. Titanium spacer and stainless steel screws.
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: carbon fiber and titanium
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 117mm.
Total length: 203mm.
Thick when closed: 13.3mm.
Weight: 130g.
Opening: Carson Flipper system
Washers: in steel and bronze, with ball bearings
Closure: Sub FrameLock
Clip: titanium, removable
Sheath: nylon pouch with zip and belt loops
Packaging: cardboard box with MKM logos Maniago Knife Makers
Notes: Design by Lucas Burnley - Knife manufactured by ViperMKVP01-CB