Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
ExtremaRatio - Shrapnel knife - Geo Camo - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased - SERIAL CK0269D
* Condition: quite good, the knife was used for medium/light cuts
* Commercially available: Out of production
* Sharpening: Factory sharpened
* Marks on blade: various due to use (see related photos), mostly rubbing/slight polishing
* Marks on handle: slight
* Box: Present, one side was damaged and was fixed with tape
* Scabbard: original
* Manuals, Certificates and Warranties: - -
* Checked and certified by our in-house laboratoryIntended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: N690Co stainless steel
Finish: Geo Camo (burnishing with laser treatment)
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: recessed
Weight: 212g.
Sheath: ABS sheath with Tek-Lok attachment with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logosER-SHR-GEO-CP -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Randall Knives - Astro Model 17 - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.
Intended use: utility/militaryType of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collectionAP-RK-17ASCP -
MoraKniv - Basic 546 Limited Edition 2024 - Dala Red & Ivy Green - 14282 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414282 -
MoraKniv - Basic 511 Limited Edition 2024 - Ivy Green & Dala Red - 14281 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414281 -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / CollectionType of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:AP-C81GS -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
MoraKniv - Wit - Black Blade and Ash Wood - 14084 - knife
A reliable, full tang bushcraft knife that can be used in a wide variety of situations during your next long-duration adventure. The ergonomic polished ash wood handle allows for a variety of grips that can be useful. The black recycled Swedish stainless steel blade, with its full curvature and drop point, allows you to get the most out of your experience. The back of the blade is also compatible with a fire starter.
The unique, carefully selected ash wood handle features a functional grip bead and a 2.5 mm thick black blade made of recycled Swedish stainless steel, providing strength and stability with every cut. Thanks to the design of the blade and handle, the knife is well balanced and specially developed for precision work. The black PC coating creates a balanced contrast between the bright ash wood and the polished edge of the blade. The vegetable-tanned leather sheath has a belt loop and protects the cutting edge from surfaces that can dull the knife.
Intended use: hiking / bushcraft / light utility
Type of manufacture: semi-crafted
Blade: full tang, recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: ash wood
Blade length: 103mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Balance: advanced
Weight: 128g.
Sheath: vegetable-tanned leather
Notes: scandi-type sharpeningM14084 -
MoraKniv - Stainless Companion Bushcraft - OD Green - 14065OD - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065OD -
MoraKniv - Stainless Companion Bushcraft - Desert - 14065DE - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065DE -
MoraKniv - Stainless Companion Bushcraft - Black - 14065BK - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065BK -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collectionAP-FRANK-TI -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini8,5 -
Buck - Buckmaster 184 Survival Knife -1984 - COLLEZIONE PRIVATA - vintage coltello
The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.
The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.
Destination of use: Sportivo / Collezione
Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.BUCK-184 -
Collini Cutlery - Scissors Thinning mod. Style by Salon Professional 6"
Scissors Thinning mod. Style by Salon Professional 5.5 "
Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.Each scissor is controlled by our laboratory in order to ensure a perfect cut
collini29 -
Collini Cutlery - Scissors Thinning Style by Salon Professional 5.5"
Scissors Thinning mod. Style by Salon Professional 5.5 "
Material: Stainless steel 420 satined
Blade: a smooth and notched
Blade Length: 5.5 cm
Overall Length: 5.5 Inches - 14,5 cm
Sharpening: Plain
Finger rest: Removable
Weight: 46 gr.Each scissor is controlled by our laboratory in order to ensure a perfect cut
collini026B -
Coltelleria Collini - Chef's food tongs - Beak - 15 cm
Coltelleria Collini - Chef's food tongs - Beak - 15 cm
Chef's food tongs with beak - 15 cm.
Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decorating of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Specifications:
Dishwasher safe
Length: 15cm.
collini0013 -
Coltelleria Collini - Scissors for animals mod. straight blade - 9 ''
Scissors for animals mod. straight blade - 9 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 12 cm Total length: 9 inch - 23 cm Sharpening: Plain / smooth Finger rest: Fixed Each scissor is controlled by our laboratory in order to ensure a perfect cutcollini34 -
Coltelleria Collini - Animals Scissors straight blade - 8 ''
Scissors straight blade animals - 8 '' Scissors specifically designed for thinning and shearing of animals The scissors of the Style series are produced in high carbon content stainless steel, characterized by semi-convex blades and concave inner surface to significantly reduce the effort of the hand during cutting, thus guaranteeing a cutting performance easier, precise and lasting. Material: 420 Stainless steel brushed straight blade: Blade length: 9 cm Total length: 8 inch - 19 cm Sharpening: Plain / smooth Finger rest: Fixedcollini33 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 10 cm
Classic series nail clippers are manufactured from high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 10 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini23 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 12 cm
Classic series nail clippers are manufactured from high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini025 -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 13 cm
Classic series nail clippers are made of high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Single spring
- Total size: 13 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.
collini027 -
Coltelleria Collini - Chef's tongs for food - Sushi - 21cm
Coltelleria Collini - Chef's tongs for food - Sushi - 21cm
CHEF'S TONGS
Stainless steel chef's tongs, useful for checking the cooking of food and making it easier to grip. Its curved shape makes it possible to move and check the food more precisely, especially for the plating and decoration of sweet or savoury dishes.
Ideal especially for preparing sushi dishes.
Technical features:
Dishwasher safe
Length: 21cm.
collini0012 -
Coltelleria Collini - microfibre cloth for cleaning blades - accessory
The microfibre cloth for cleaning blades, offered by Coltelleria Collini, represents an essential accessory for cutlery enthusiasts and for those who want to keep their blades always in perfect condition. This cloth, measuring 15x15 cm, has been designed to offer effective cleaning of the blades, easily removing fingerprints, grease and dirt without leaving streaks or scratches.
Personalized with the Coltelleria Collini logo, this cloth is not only a practical maintenance tool, but also becomes a symbol of belonging to our community of enthusiasts and customers.
Suitable for both daily and professional use, the microfibre cloth for cleaning blades is the accessory that cannot be missing from every knife lover's collection.
CC-PANNOMF -
Coltelleria Collini - Stainless steel cutter for ingrown toenails 14 cm
Classic series nail clippers are made of high cobalt stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for ingrown nails
- Stainless steel
- Excellent quality
- Double spring
- Total size: 14 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening laboratory, checks and overhauls every tool sold.
collini037 -
Coltelleria Collini - Black Hat - Gadgets
Black Hat - Gadgets
Comfortable 100% cotton baseball cap with embroidery Collini Cutlery.
The baseball cap is useful in all situations, with a modern pre-curved visor, a comfortable shelter from the sun, and the light summer rain, very breathable and durable cotton.
One size fits all adjustable through system closing on the back.
collini-hat -
Coltelleria Collini - Stainless nail clippers 12 cm
Style series nail clippers are manufactured from high-carbon stainless steel.
Professional, stylish, sturdy, practical nail clippers suitable for hand manicures
- Stainless steel
- Excellent quality
- Single spring
- Total size: 12 cm.To ensure a perfect cut, Coltelleria Collini, with its in-house sharpening workshop, checks and overhauls every tool sold.
collini034 -
Coltelleria Collini - Stainless Steel Cutter for Skins
Style series cutters are manufactured from high-carbon stainless steel.
Professional, stylish and practical cutters suitable for hand manicures
- Stainless steel at
- Excellent quality
- Single spring
- Cutting size: 5 mm or 7 mmTo ensure a perfect cut, Coltelleria Collini with its in-house sharpening workshop checks and overhauls every tool sold.
collini036 -
Coltelleria Collini - Professional Hairdressing Scissors 5.5"
Classic series hairdressing scissors
Material: satin-finish 420 stainless steel
Blade: smooth
Blade Length: 5 cm
Total Length: 5.5 Inches - 14 cm
Sharpening: Flat
Finger Rest: Removable
Weight: 44 gr.Each scissor is checked by our in-house laboratory in order to ensure a perfect cut
collini012 -
Boker Plus - Jim Wagner Reality-Based Blade - PRIVATE COLLECTION - 01BO053
Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO053 -
Coltelleria Collini - microfibre bag for folding knives - 180 X 80 mm - accessory
Microfibre bag for folding knives, offered by Coltelleria Collini, confirms itself as an essential accessory for knife enthusiasts and for those who aspire to preserve their blades in impeccable condition. Characterized by generous dimensions of 180x80 mm, this bag has been meticulously designed to house and protect folding knives, using a quality microfibre material that guarantees effective defense against dust, abrasion and impacts.
Equipped with a practical drawstring closure system, enriched by a plastic thread holder, the bag ensures additional protection for the knives, preventing them from accidentally slipping out. The functionality of the drawstring allows for quick and simple sealing, making the bag extremely practical for both everyday and professional use.
The customization with the Coltelleria Collini logo imprinted on the bag not only elevates its aesthetic appearance, but also transforms it into a sign of belonging to our community of enthusiasts and customers.
CC-BAGMF -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - Black RWL34 - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: stainless steel full-tang RWL-34 60 / 61HRC
Surface treatment: surface coating TIN "Advance Top" - Multi-layer aluminum and amorphous carbon titanium - Microhardness (HV 0.05): 3500 Vickers
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9005 -
Fabrizio "Silvester" Silvestrelli - Custom CSFK - CPM-S30V - handmade knife
Knife handmade, designed and produced in only 10 copies (5 CPM-S30V steel sandblasted and 5 in RWL-34 steel coated TIN) from the known knifemaker Fabrizio "Silvester" Silvestrelli in collaboration with Collini Cutlery.
Further the CSFK feature is the ability to change at will the manicatura the same between the grips included in the package: Micarta Loveless, G10 or Black Paracord Camouflage. The knife can also be deprived of the grips to be used as a spearhead or to minimize the footprint thickness.
Intended use: tactical / collection
Type of production: made entirely by hand, limited and numbered
Production Country: Italy
Blade: full tang CPM-S30V Stainless Steel 60 / 61HRC
Surface treatment: glass micropallinatura
Handle: Micarta Loveless / G10 / Paracord
Blade length: 135mm.
Blade Thickness: 5.5mm.
Overall length: 250mm.
Weight: 225g.
Sheath: Cordura, made in the USA, made by Blackhawk
Notes: knife made by the cutler Fabrizio "Silvester" Silvestrelli in only 5 specimens - certificate of guarantee and authenticity - key to remove the grips9006 -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Strider Knives - Fixed Tanto Tiger Stripe knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: TacticalProduction type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collectionST-FTTS-CP -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.
The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.
The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.
Intended Use: Sporting/Collection
Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydexSOG-S37SEAL-CP -
Chris Reeve - Small Sebenza Knife - Unique Graphic Black Onyx - BG42 Steel - PRIVATE COLLECTION
Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: CollectionProduction Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificatesCR-SS21APUG -
Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryBlade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without boxAP-GE-APP -
SOG - Vulcan Black TiNi - VL11 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collectionSOGVL11-CP