Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL€130.33Only 1 leftOnly 1 left
-
Spyderco - 1997 Calypso Jr. Experiment PLN Micarta - C52BMP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued since 2000
* Sharpening: Factory.
* Marks on blade: Small marks due to blade opening.
* Marks on handle: Small marks on metal pins.
* Box: Yes, original
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDC / Collection
Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8
Blade Finish: Satin finish
Handle: G-10 with stainless steel liners
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 170mm.
Weight: 65g.
Closure: Back Lock
Clip: painted stainless steel, removable
Packaging: white cardboard box, no logos, with serial number, production code and Spyderco bar code
Notes: Knife produced in June 1997 - remained in production only from 1997 to 2000, experimental version of the Calypso Jr. model.C52BMP-CP€0.00Only -50 leftOnly -50 leftOut of stock -
Spyderco - Dragonfly 2 Salt Yellow Hawkbill - C28YL2HB - Knife
Intended use: sub / immersion / sports
Type of production: Industrial
Country of production: Japan
Blade: in H1 nitrogen steel
Blade treatment: satin finish
Handle: FRN (fiberglass reinforced nylon)
Blade length: 58mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 139mm.
Weight: 37g.
Closure: Back Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Spyderco logos
Notes: carbon-free blade, resistant to rust, oxidation and corrosionC28YL2HB€83.61Out of stock -
Spyderco - Ark H1 Neck Knife - FB35PBK - knife
Intended use: EDC / Neck Knife
Type of production: Industrial
Production Country: Japan
Blade: Stainless Steel H1
Blade treatment: Satin finish
Handle: FRN
Blade length: 65mm.
Blade thickness: 2 mm.
Overall length: 126mm.
Weight: 26g.
Sheath: Boltaron (plastic) with steel chain to wear around my neck
Packaging: cardboard box with Spyderco logos
Notes: Design by John Shirley and Sam Owens12612€81.15Out of stock -
Spyderco - Dragonfly 2 Salt Yellow - C28YL2 - knife
Intended Use: Sport / Sub
Blade: Stainless H1 nitrogen
Handle: FRN - Fiberglass Reinforced Nylon
Blade length: 57mm.
Blade Thickness: 2.5mm.
Closed Length: 84mm.
Total length: 141mm.
Balance: -
Weight: 34g.
Closure: Back Lock
Clips: stainless
Sheath: -
Notes: Resistant to rust and oxidation10130€81.97Out of stock -
Spyderco - Pacific Salt Black - C91SBK2 - coltello
Destinazione d'uso: sub/sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio all'azoto H1
Trattamento Lama: -
Manicatura: FRN
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone nera e rossa con loghi Spyderco
Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.3699B€118.85Out of stock -
Spyderco - Pacific Salt Yellow - C91SYL - coltello
Destinazione d'uso: sub/sportivo
Tipo di produzione: Industriale
Produzione Lama: Japan
Lama: in acciaio all'azoto H1
Trattamento Lama: -
Manicatura: FRN
Lunghezza lama: 95mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 220mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 82g.
Chiusura: Back Lock
Clip: amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone nera e rossa con loghi Spyderco
Note: Questo coltello ha una lama in acciaio PH (precipitation hardened) che non arrugginisce in quanto contiene solo lo 0.15% di carbonio e circa lo 0.10% di azoto risultando particolarmente adatto ad usi subacquei e marini. I voti prodotto sono quindi dati tenendo conto di questo utilizzo primario.3699€118.85Out of stock -
Spyderco - Tasman Salt - C106PYL - knife
Spyderco - Tasman Salt - C106PYL - knife
Intended Use: Dive / Sports
Type of production: industrial
Blade: Stainless nitrogen H1
Treatment Lama: -
Blade Production: Japan
Handle: FNR
Blade length: 75mm.
Blade Thickness: 2mm.
Closed Length: 100mm.
Total length: 172mm.
Balance: -
Weight: 56g.
Closure: Back Lock
Clip: removable and reversible stainless steel
Sheath: -
Note: This knife has a steel blade PH (precipitation hardened) that will not rust as it contains only 0.15% carbon and about 0.10% on the nitrogen making it particularly suitable for use underwater and marine. The product ratings are therefore no data considering this primary use.3651€106.56Only -99 leftOnly -99 leftOut of stock
