Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / Collection

Type of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collection

Exclusive limited edition series in collaboration with INSTRUCTOR ZERO (Team Zero International Training Security Company), renowned firearms training specialist, risk analyst and strategic consultant working worldwide for both military and law enforcement specialized units and government agencies.

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from private collection, previously purchased.
* Condition: New, never used
* Commercially available: Discontinued, limited run of only 33 numbered pieces
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Tactical / Collection

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade Length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 23mm. (15mm without clip)
Weight: 139g.
Closure: Liner Lock with additional safety catch
Clip: Stainless Steel
Packaging: watertight plastic box with Extrema Ratio and Team Zero logos, Warranty Certificate, Velcro Patch, Limited edition made in only 33 pieces

Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.

The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.

Intended Use: Sporting/EDC

Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivot

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: EDC / Rescue

Production Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -

The GLAUCA B1 folding knife was born from the collaboration with the GIGN (special unit of the French National Gendarmerie). It has a tip designed to allow maximum penetration. On the back of the handle it features a stop strap cutting system.

It is equipped with a rear glass breaker, a clip that can be applied in three positions and a side safety device.

The rigid sheath is made of ABS applied to a Cordura base and allows you to store the knife with the blade open.

Allows multiple attachment options: MOLLE system for tactical vests, belt attachment and thigh attachment.

KNIFE RETIRED FROM PRIVATE COLLECTION

* Type: Previously Purchased
* Condition: Excellent condition
* Commercially available No
* Sharpness: Original
* Marks on blade: small scratches on the blade
* Marks on handle: NO
* Packaging: YES
* Sheath: YES
* Manuals, Certificates and Warranties: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: N690Co stainless steel
Blade finish: Burnished
Handle: Rough Anticorodal
Blade length: 115mm.
Blade thickness: 4mm.
Closed length: 158mm
Total length: 268mm.
Closed thickness: 15mm.
Weight: 197g.
Closure: Liner Lock with Additional Safety
Clip: Removable and multi-position, in stainless steel
Sheath: Cordura and Kydex with magnetic blade retention
Packaging: Cardboard box with Extrema Ratio logos
Notes: supplied with the G.I.G.N. (National Gendarmerie Intervention Group) French, specialized in operations against terrorism and emergency response in the event of hostages

KNIFE RETIRED FROM PRIVATE COLLECTION

Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: Sporting

Production Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory

Intended Use: Sporting

Type of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collection

Intended Use: Sporting / Collection

Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant Black version utilizes Böhler N690, hardened to 58 HRC for the best balance between edge retention and toughness, a type of steel used by Extrema Ratio for most of its knives.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel N690 58 HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:

The Ant is the most compact among Extrema Ratio's folding knives. Despite its small size, this model features an extremely sturdy, durable, and reliable structure.

The handle is made of two different elements: the cheek piece crafted from anodized anticorodal aluminum and the hardened steel frame which also serves as the blade lock (Frame Lock System). This mechanism involves a part of the frame bending inward to firmly secure the blade in the open position, enhancing the user's safety during the knife's use.

The tang features a hole for the insertion of a lanyard, and on the right side of the handle, there is a steel clip that allows for concealed carry in the pocket.

The Ant is available in 4 versions with two different types of steel, both provided by Böhler, an Austrian company with which Extrema Ratio has been collaborating for over 20 years, using its highly esteemed materials for the production of its blades.

For the Stone Washed M390 version, Extrema Ratio uses Böhler M390 steel, thermally treated to 61 HRC, which, thanks to a powder metallurgy production process, ensures cutting effectiveness, wear resistance, and oxidation resistance over time.

The blade is sheep foot-shaped and has a small hole on the top part to facilitate opening. Its particular structure, with a straight edge, allows the user to comfortably rest their fingers on the back of the knife and use it with ease.

Type of production: industrial
Blade: in stainless steel M390 61HRC
Blade production: Italy
Handle: anodized anticorodal aluminum and steel
Blade length: 70mm.
Blade thickness: 2.2mm.
Closed length: 55mm.
Total length: 127mm.
Balancing: -
Weight: 42g.
Closure: Frame Lock
Clip: removable stainless steel
Sheath: -
Notes:

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory

Intended Use: Sporting / EDC

Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearings

Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition is a limited series version of only 250 pieces that preserves intact all the features of the famous Caimano Nero N.A. model, a non-automatic version of the tactical knife that Extrema Ratio delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy.

The Extrema Ratio Caimano Nero N.A. Ranger XXV Anniversarium Limited Edition comes in an IP67-certified watertight Polypropylene technical case, with pressurization valve, weatherproof, dustproof and shockproof, inside of which is also an Extrema Ratio 25th Anniversary commemorative coin and metal plaque with the progressive number of the limited series.

Intended Use: Tactical/Military

Type of manufacture: industrial
Blade: stainless steel N690Co 58HRC
Country of Production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total length: 231mm.
Weight: 180g.
Closure: Liner Lock with additional safety catch, when knife is open
Clip: deep pocket, reversible and removable, stainless steel
Notes: Limited edition made of only 250 pieces accompanied by polypropylene case and commemorative coin

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 2014 knife overall in near new, unused condition, some minor marks on metal parts given by age
* Commercially available Discontinued.
* Sharpening: Factory sharpened, never used for cutting.
* Marks on blade: No
* Marks on handle: Some discoloration of laser engravings given by age.
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory



Intended Use: Tactical / Multirole

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co hardened to 58HRC
Blade Finish: Desert Warfare
Handle: Anticorodal with stainless steel spacer
Blade length: 115mm.
Blade thickness: 6.3mm.
Total length: 260mm.
Weight: 245g.
Lock system: Back Lock with additional safety pin
Packaging: cardboard box with Extrema Ratio logos
Notes: Previously purchased discontinued specimen from a private collection. Full set, in near-new condition

KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially Available Available.
* Sharpening: Factory.
* Marks on blade: A couple of light marks on burnishing.
* Marks on handle: Slight signs of wear on hardware and clip.
* Box: Present, but not in perfect condition
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory


Intended Use: Tactical/Sporting

Production Type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Anticorodal (aluminum)
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 181mm.
Thickness when closed: 15mm.
Weight: 139g.
Closure: Liner Lock, with additional safety catch
Clip: stainless steel removable and reversible
Packaging: cardboard box with Extrema Ratio logos

Intended Use: Sporting

Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available NO
* Sharpness: Original
* Marks on blade: NO
* Marks on handle: NO
* Packaging: YES
* Checked and Certified by our internal laboratory

Type of production: Industrial
Country of production: Italy
Blade: in N690Co stainless steel
Finish: Testudo burnishing
Handle: Anodized aeronautical aluminum anticorodal
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 210mm.
Weight: 152g.
Sheath: -
Packaging: Cardboard box with Extrema Ratio logos and manufacturer's certificates
Notes: emergency blade with snap opening (length. 8 cm) - glass breaker - model from 2013 now out of production

A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.

A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.

Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.


Intended use: sub/sporting

Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended Use: Sporting

Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steel

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum T is a folding knife with a clear tactical connotation equipped with a spear point blade with lightening slot. It has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the user to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

Ferrum T is available in 2 versions: the first, FERRUM T Black Warfare, equipped with a black handle and Geotech Camo blade, the innovative and original Extrema Ratio camouflage pattern, created by laser engraving. The second, FERRUM T TACTICAL MUD, with anodized handle in the new gray-green color and blade with MIL-C-13924 bluing.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade Finish: Black
Handle: Rough Anticorodal
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 184mm.
Weight: 86g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum Rescue is a tool designed for rescue operations, developed in collaboration with my friend Andrea Micheli, military and law enforcement expert, journalist and shooting instructor. Made with a very compact handle, this rescue tool is equipped with 3 blades, each of which has a specific function:

The first and main blade has a thickness of 3 millimeters and is designed to be used for more demanding purposes and to protect the cutting edge of the other two from premature wear. The teeth allow it to cut larger ropes or textile materials, the remaining smooth part has the classic function of a knife. The second blade is a scalpel, which can be used for extremely precise cuts and for emergency first aid interventions. The third blade, on the back of the first, is the smallest of the 3, it has the function of cutting lines, capable of cutting paracord and aramid material.

The interaction of the main blade with the scalpel allows the operator to make a quick emergency cut to free any injured person from his or her clothing.

The line cutter blade and the scalpel are both interchangeable.

Ferrum Rescue has a slim and compact shape, the two anodized anticorodal aluminum grips make up a light, slender and at the same time very resistant handle. It can be housed in a breast pocket, in small flashlight holsters or inside a single loop of the M.O.L.L.E. system. On the back there is also a hard metal glass breaker.

Equipped with a flipper assisted opening system, the blade rotates on ball bearings which allow a smooth and uncertain movement of the blade. This mechanism allows the operator to open the blade quickly and easily, even with just one hand. The locking system adopted is the well-tested liner lock. The reversible clip is positioned on the back.

The reversible clip is positioned on the back.

Intended use: Tactical / EDC

Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 56mm.
Blade thickness: 3mm.
Closed length: 90mm.
Total length: 170mm. (18mm. INCLUDING SCALPEL BLADE)
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, in stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Note: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Ferrum E is a simple, essential and functional EDC (Every Day Carry) folding knife. Equipped with a drop blade, it has a slim and compact shape, the two anodised anticorodal aluminium sheaths make up a light, slender and at the same time very durable handle. It can be housed in a breast pocket, in small torch holsters or inside a single M.O.L.E. loop.

Equipped with a flipper-assisted opening system, the blade rotates on ball bearings that allow for smooth and uncertainty-free blade movement. This mechanism allows the operator to open the blade quickly and easily, even with one hand. The locking system adopted is the tried and tested liner lock.

The reversible clip is positioned at the rear.

Intended use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade finish: Satin
Handle: Rough Anticorodal
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 186mm.
Weight: 87g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended Use: Tactical / EDC

Production type: Industrial
Country of Production: Italy
Blade: stainless steel N690Co 58HRC
Blade Finish: Burnishing MIL-C-13924
Handle: Rough Anticorodal
Blade Length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Weight: 85g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: Cardboard box with Extrema Ratio logos
Notes: -

Intended Use: Tactical/Emergency

Production type: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 58HRC
Blade Finish: Desert Warfare
Handle: Anodized Anticorodal Aluminum
Blade Length: 95mm.
Blade thickness: 4mm.
Length closed: 134mm.
Total length: 225mm.
Thickness when closed: 24mm.
Weight: 162g.
Closure: Liner Lock
Clip: Stainless Steel
Packaging: cardboard box with Extrema Ratio logos
Notes: belt cutter, glass breaker, optics screwdriver

NON-automatic version of the Caimano Nero model

The Black Caiman is a tactical knife that Extrema Ratio, official supplier of Comsubin, has developed and delivered to the G.O.I. (Gruppo Operativo Incursori) of the Italian Navy. Its name recalls and pays homage to the heroic Caimani Neri del Piave, a department of Arditi of the Regia Marina and other components on a voluntary basis, which during the First World War crossed the Piave River by swimming to carry out raids in enemy territory.

Spear Point" 4 mm blade with asymmetrical rounding and partial sharpening of the counterbore to increase the penetration coefficient. The toothing on the blade allows you to cut cables and fabrics with high resistance preserving the sharpness.

It is a medium folder with a robust structure. The thick aluminum cheeks, thanks to the many processes of removal make the knife light and balanced. The end of the handle, which recalls the shape of the Helix/Timon group of the slow running torpedo (S.L.C.), serves to improve the grip for the rapid extraction of the knife from the pocket.

The DLC-coated titanium clip can be positioned at three different angles on either side to allow for maximum customization of the carry. Its shape is designed to minimize the bulk of the handle outside the pocket.

Among its endowments, besides the carbide glass breaker, there is also a safety, that when inserted, preserves from a dangerous accidental closing of the blade.

Destination of use: Tactical/Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade length: 93mm.
Blade thickness: 4mm.
Length closed: 140mm.
Total lenght: 231mm.
Weight: 180g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Notes: Additional safety stop, when knife is open

Intended Use: Sporting/EDC

Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -

The BF2 is a "full size" lockable particularly suitable for professional use by military and police operators in the field. The handle is firm and comfortable; the clip, reversible and enveloping, becomes a useful and comfortable support for the thumb in "reverse grip". The grip is full with the characteristic lowered surfaces to engage the opening "pins" without protruding from the profile of the closed knife. The blade, available in a drop or a lot version, has a flat edge and, as in the BF1, a particularly thick and resistant tip. The blade locking mechanism is the tested LINER-LOCK, assisted by a safety mechanism to be operated manually protected by a casing.

Intended use: Tactical / Military

Type of production: industrial
Blade: N690Co 58HRC stainless steel
Country of production: Italy
Handle: Anticorodal
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 124mm.
Total length: 210mm.
Balancing: -
Weight: 142g.
Closure: Liner Lock
Clip: reversible and removable in stainless steel
Sheath: -
Notes: Safety stop with open knife

Il BF2 è un chiudibile “full size” particolarmente indicato per l’impiego professionale da parte di operatori militari e di polizia sul campo. L’impugnatura è salda e confortevole; la clip, reversibile ed avvolgente, diventa un utile e comodo appoggio per il pollice in “reverse grip”. La guancetta è piena con i caratteristici piani ribassati per impegnare i “pin” d’apertura senza che sporgano dal profilo del coltello chiuso. La lama, disponibile in versione drop o tanto, ha l’arrotatura piatta e, come nel BF1, la punta particolarmente spessa e resistente. Il meccanismo di blocco della lama è il collaudato LINER-LOCK, coadiuvato da un meccanismo di sicura da azionare manualmente protetto da un carter. 

Destinazione d'uso: Tattico/Militare

Tipo di produzione: industriale
Lama: in acciaio inox N690Co 58HRC
Paese di produzione: Italia
Impugnatura: Anticorodal
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 124mm.
Lunghezza totale: 210mm.
Bilanciatura: -
Peso: 142g.
Chiusura: Liner Lock
Clip: reversibile ed amovibile in acciaio inox
Fodero: -
Note: Fermo di sicurezza a coltello aperto

Intended Use: Sporting / Tactical

Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finish

Intended use: Sporting

Type of production: industrial
Blade: Stainless steel VG-10
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 206mm.
Thickness when closed: 15.5mm.
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position stainless steel clip
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -

Intended Use: Sporting

Production type: Industrial
Country of Production: Usa
Blade: Stainless steel CPM-SPY27
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush stainless steel clip
Package: cardboard box with Spyderco logos
Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.

The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

Intended use: collection / CQD

Type of production: industrial
Blade: in N690Co stainless steel
Blade treatment: Black DLC
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logos

The Extrema Ratio Frame Rock is a new knife, based on the Ti-Rock project, a successful frame-lock knife made by Extrema Ratio in 2016 exclusively for Coltelleria Collini.

The Extreme Ratio Frame Rock is characterized by the titanium handle that offers great resistance while being very light. The integrity of the frame-lock locking system is guaranteed against wear by an easily replaceable hardened steel insert.

Unlike its drop-point predecessor, the Rock frame has a spearpoint blade 75 mm long, 6.0 mm thick, equipped with fuller for further lightening. The blade is made of Bohler N690 steel, heat treated to a hardness of 58 HRC. The same is available in black finish with DLC or satin finish.

To make the opening even more fluid and free of uncertainties, the blade rotates on ball bearings. This mechanism allows the user to adjust the force necessary to release the blade from the closed position.

The shape of the reversible clip allows a hidden port in the pocket, making the knife not visible from the outside. The large, solid handle and the well-proportioned blade allow this knife to tackle demanding tasks. Frame Rock weighs less than 200g, making it somewhat light for such a sturdy knife. It is supplied inside an ABS box.

Intended use: collection / CQD

Type of production: industrial,
Blade: in N690Co stainless steel
Blade treatment: Satin finish
Country of production: Italy
Handle: in Titanium, machined from solid, with integral Frame Lock closure system with removable hinged and safe made of stainless steel
Blade length: 75mm.
Blade thickness: 6.3mm.
Total length: 181mm.
Weight: 193g.
Clip: stainless steel, reversible, deep pocket type and with tip up port
Notes: Conical Skull Crasher inserted in the shank
Box: in ABS with Extrema Ratio logos

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -

RESOLZA, a term of ancient origin, is today one of the most famous traditional knives of our country. The name suggests the razor by chance.

It was born in Sardinia centuries ago and has accompanied its inhabitants until today in the daily work of a peasant and pastoral life, following them even when its men were called to war. The chronicles of the Sassari Brigade during the First World War cite this knife among its soldiers' equipment.

We wanted to make a tribute by revisiting it according to our canons, without wanting to hurt any of the prestigious Sardinian artisans who still today pass on the tradition and wisdom of their ancestors. The dimensions and proportions are the original ones of a 10 cm blade, but the materials and technologies are those of our production. The handle revised in our style, the blade most faithful to tradition. In addition to the original, it has the blade lock open.

Intended use: sports

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 100mm.
Blade thickness: 3mm.
Total length: 220mm.
Weight: 65g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: blade with MIL-C 13924 burnishing

RESOLZA, a term of ancient origin, is today one of the most famous traditional knives of our country. The name suggests the razor by chance.

It was born in Sardinia centuries ago and has accompanied its inhabitants until today in the daily work of a peasant and pastoral life, following them even when its men were called to war. The chronicles of the Sassari Brigade during the First World War cite this knife among its soldiers' equipment.

We wanted to make a tribute by revisiting it according to our canons, without wanting to hurt any of the prestigious Sardinian artisans who still today pass on the tradition and wisdom of their ancestors. The dimensions and proportions are the original ones of a 10 cm blade, but the materials and technologies are those of our production. The handle revised in our style, the blade most faithful to tradition. In addition to the original, it has the blade lock open.

Intended use: sports

Type of production: industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Handle: Anticorodal
Blade length: 100mm.
Blade thickness: 3mm.
Total length: 220mm.
Weight: 65g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: blade with stonewashed treatment

Intended use: sports

Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: N690Co 58HRC stainless steel
Lama treatment: Satin
Handle: Anticorodal
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 128mm.
Total length: 224mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model maintains all the features of the previous BF0 model, updated with the new High Speed Razor Opening opening system and with a Sear Point blade.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 60mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 145mm.
Weight: 52g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Testudo
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 137g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

Intended use: Tactical

Type of production: Industrial
Lama production: Italy
Blade: Stainless steel N690Co 58HRC
Lama treatment: Satin
Handle: Anticorodal
Blade length: 122mm.
Blade thickness: 3mm.
Length closed: 150mm.
Total length: 277mm.
Thick when closed: 17mm.
Balancing: -
Weight: 137g.
Closure: Liner Lock
Clip: removable in stainless steel
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

Intended use: Sports

Type of production: Industrial
Country of production: Usa
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Black PVD
Handle: G10 with 3D machining and stainless steel liners
Blade length: 91mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Model inspired by the Native, with a size of about 20%

It is a small basic folder, produced with a technopolymer handle that enhances its resistance and lightness, thanks also to the steel frame. The blade locking mechanism is the tried and tested LINER-LOCK. The model keeps all the features of the BF0 updated with the new High Speed Razor Opening opening system. Available in the following versions: BF0 R CD Desert with stone washed blade and HCS and BF0 R CD Stone Washed with stone washed blade and black grip.

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Nylon with stainless steel folders
Blade length: 55mm.
Blade thickness: 2.5mm.
Length closed: 85mm.
Total length: 140mm.
Weight: 53g.
Closure: Liner Lock
Clip: reversible and removable, in stainless steel

Intended use: Tactical / Sports

Type of production: Industrial
Country of production: Italy
Blade: stainless steel N690Co 58HRC
Blade treatment: Desert Warfare
Handle: Anticorodal
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 99mm.
Total length: 168mm.
Thick when closed: 11mm.
Weight: 85g.
Opening: Ambidextrous opening pin on the blade
Washers: Teflon
Closure: Liner Lock
Clip: stainless steel, deep pocket type, removable and reversible
Sheath: -
Packaging: cardboard box with Extrema Ratio logos
Note: -

Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.

Intended use: Sports / Tactical

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal Anodised aluminum
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 165mm.
Total length: 247mm.
Weight: 130g.
Closure: Liner Lock
Clip: absent
Sheath: absent
Note: -

Panthera is a new folding that retains all the features of the T-Razor, from which it draws inspiration, with the difference that the dorsal part of the blade goes down towards the tip, like the wharncliff blades. The knife presents the new Razor opening high speed opening system.

Intended use: Sports / Tactical

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal Anodised aluminum
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 165mm.
Total length: 247mm.
Weight: 130g.
Closure: Liner Lock
Clip: absent
Sheath: absent
Note: -

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

The BF2 R is a full size lock knife particularly suitable for professional use by military and police operators. The model retains all the features of the BF2, upgraded with the new high speed Razor opening opening system.

Target: Tactical / Military

Type of production: industrial
Blade: stainless steel N690Co 58HRC
Country of production: Italy
Handle: Anticorodal
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total length: 214mm.
Weight: 140g.
Closure: Liner Lock
Clip: deep pocket, reversible and removable, in stainless steel
Sheath: -
Notes: Additional safety catch with open knife

Purpose of use: Sport

Type of production: Industrial
Country of production: China
Blade: stainless steel CTS-BD1
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 74mm.
Blade thickness: 3mm.
Closed length: 105mm.
Overall length: 179mm.
Closed thickness: 16mm.
Weight: 93g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: -

Intended use: Sports

Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground

Intended use: Sports

Type of production: Industrial
Production Country: China
Blade: 8Cr13MoV Stainless Steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 104mm.
Overall length: 180mm.
Thick when closed: 16mm.
Balancing: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -

Intended use: Sports

Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground

Intended use: Sports

Type of production: Industrial
Blade: Stainless Steel VG-10
Blade treatment: satin
Production Country: Japan
Handle: FRN liners with embedded stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15.5mm.
Weight: 94g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Full-Flat Grind

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Stone Washed
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Folding knife with rescue karambit connotation, adopted by the special units of the Police of the Principality of Monaco U.S.I.V.P. The knife gets its name from a development and consulting department of the special intervention forces Monegasque.

Intended use: Tactical / Rescue

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 73.5mm.
Blade thickness: 3mm.
Closed Length: -
Overall length: 196mm.
Thick when closed: -
Weight: 166g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos
Notes: Size emergency belts and skull crasher

Intended use: Tactical

Type of production: Industrial
Production Country: Italy
Blade: Stainless steel 58HRC N690Co
Blade treatment: Testudo MIL-C-13924
Handle: Anticorodal
Blade length: 68mm.
Blade thickness: 4mm.
Closed Length: 110mm.
Overall length: 181mm.
Thick when closed: 23mm. (15mm without clips)
Weight: 139g.
Lock: Liner Lock with safety catch further
Clip: Stainless Steel
Packaging: black cardboard with Extrema Ratio logos

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 79mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 173mm.
Weight: 36g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

The Resolza is the typical Sardinian folding knife, called improperly "Pattada" from the name of the village in the province of Sassari which is the production center. Extrema Ratio wanted to pay homage to the most famous knife of the Italian tradition by blending its original shape and traditional, with the techniques and the most advanced materials.

Intended use: Sports

Type of production: Industrial
Blade: N690Co 58HRC stainless steel
Production Country: Italy
Handle: Anticorodal
Blade length: 79mm.
Blade Thickness: 3mm.
closed length: -mm.
Overall length: 173mm.
Weight: 36g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -

Intended use: Sporting

Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat Grind

Destinazione d'uso: Tattico

Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 58HRC
Trattamento Lama: Desert Warfare
Manicatura: Anticorodal
Lunghezza lama: 95mm.
Spessore lama: 4mm.
Lunghezza chiuso: 134mm.
Lunghezza totale: 225mm.
Spessore da chiuso: 24mm.
Bilanciatura: -
Peso: 165g.
Chiusura: Liner Lock
Clip: Acciaio Inox
Fodero: -
Confezione: scatola in cartone con loghi Extrema Ratio
Note: Skull Crasher / Rompivetro incorporato nel codolo del coltello

Spyderco - Cat SC129GP - knife

Intended Use: Sport / EDC

Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -

Intended Use: EDC / Sports

Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Blade treatment: -
Handle: Stainless steel
Blade length: 58mm.
Blade thickness: 2mm.
Closed Length: 80mm.
Overall length: 140mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closure: Back Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -

Use: Sports

Type of production: industrial
Blade: Stainless steel 58HRC N690Co
Production Blade: Italy
Handle: Anticorodal
Blade length: 122mm.
Blade Thickness: 3mm.
Closed Length: -mm.
Overall length: 268mm.
Balancing: -
Weight: 93g.
Lock: Liner Lock
Clip: -
Sheath: -
Notes: -