Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
Viper - Belone by Vox - Satin M390 & Blue Dark Matter Carbon Fiber - V5970TIFCB - knife
In designing the Belone, Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern, minimalist style that has made him famous worldwide. The result is a light, tapered folding knife embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting qualities, and the ball bearings make it the fastest flipper opening, perfectly integrated into the overall design. The carefully crafted ergonomically designed handle has an anodized titanium frame enclosed between thin carbon fiber folders. The Belone's clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.Intended Use: Sporting / EDC
Production type: Industrial
Country of manufacture: Italy
Blade: Stainless steel M390 60-61HRC
Blade Treatment: Satin finish
Handle: Stonewashed titanium and forged carbon fiber "Dark Matter" in blue color
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thickness when closed:11.3mm.
Weight: 78g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970TIFCB -
Viper - Vale by Vox - Satin MagnaCut & Titanium Bronze - V6004TIBR - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.
Intended Use: EDC
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004TIBR -
Viper - Vale by Vox - Satin MagnaCut & Titanium Blue - V6004TIBL - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high-quality EDC knife, called Vale, made from select materials. The MagnaCut blade opens gently thanks to the thumb stud and is locked in place by the sturdy liner lock. The titanium handle features three-dimensional machining, offering a pleasant feel and safe work. The anodized titanium backspacer completes the knife's harmonious appearance.
Intended Use: EDC
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut steel
Blade Finish: Satin
Handle: Anodized titanium
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004TIBL -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Viper - Moon by F. Silvestrelli - Green Dark Matter Carbon Fiber & CPM MagnaCut - V6008FCV - knife
Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade.
A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems.
The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Satin finish
Handle: Dark Matter Carbon Fiber in Green color, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6008FCV -
Viper - Moon by F. Silvestrelli - Natural Micarta & CPM MagnaCut - V6010CN - knife
Designed by master designer Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock," a locking mechanism that is activated by a button on the handle. This type of lock provides a secure and reliable lock for the blade.
A state-of-the-art steel such as MagnaCut was chosen for the blade: a high-strength steel known for its hardness and edge retention capacity. Thanks to these properties, the blade is able to tackle a variety of tasks without any problems.
The handle has an ergonomic and comfortable grip. The 3D finish gives the handle a unique look and provides a secure grip during use. The handle is precisely designed to fit the shape of the hand, ensuring optimal control of the knife.
Intended Use: Sporting
Production type: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: Natural Canvas Micarta, double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (75mm. cutting edge).
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6010CN -
Viper - Moon by F. Silvestrelli - UltreX SureTouch & CPM MagnaCut - V6010GG - knife
Designed by master knife maker Fabrizio Silvestrelli, Moon is Viper's first knife to adopt the hardened "button lock."
The handle uses the brand new UltreX SureTouch composite in modified G-10.
SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material.
The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.
Intended Use: Sporting
Type of production: Industrial
Country of Production: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior) with double 420 stainless steel liner with GR2 titanium spacer and 303/305 stainless steel hardware
Blade length: 87mm (cutting edge of 75mm.)
Blade thickness: 4mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed:18mm.
Weight: 140g.
Closure: Button Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio SilvestrelliV6010GG -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Viper - Katla by Vox - 3D Carbon Fiber - V5980FC3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 122g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FC3D -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Damascus Carbon Fiber - V6000FCDL - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Stainless steel Elmax SuperClean 59/61HRC
Blade Finish: Satin finish
Handle: carbon fiber and stainless steel damascus effect handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000FCLD -
Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / CollectionType of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:AP-C81GS -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
Viper - 2023 Titanium and Mother of Pearl Limited Edition Collection - Hug, Key, Twin - VCOL/2022M - knives
Precious Mother-of-Pearl Collection consisting of 3 knives: TWIN, KEY, HUG with titanium handle and mother-of-pearl insert. Rounded spring with handmade file work. Accompanied by individual leather liners.
Limited and numbered series of 200 sets with cylindrical wooden and plexiglass display stand.
HUG DATA SHEET
Type of production: Industrial, with handmade lima spring
Country of production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 75g.
Closure: Slipjoint
Clip: titanium
Notes: Design by Sacha Thiel
KEY DATA SHEET
Type of production: Industrial, with handcrafted file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 185mm.
Thickness when closed:10.5mm.
Weight: 75g.
Closure: SlipJoint
Clip: -
Notes: Design by Jesper Voxnaes
TWIN DATA SHEET
Type of production: Industrial, with handmade file spring
Country of Production: Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium GR5 and Mother of Pearl
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Clip: -
Notes: Design by Fabrizio SilvestrelliVCOL/2022M -
Viper - Vale knife by Vox - Walnut - MagnaCut - V6004NO - knife
Enthusiasts know the value of a good knife. Viper honors this idea with its high quality EDC knife, called Vale, made with selected materials. The MagnaCut blade opens smoothly with the thumb stud and is locked in place with the sturdy liner lock. The walnut handle features carvings on the back of the blade, providing a pleasant feel and safe working. The backspacer made of high-quality titanium completes the harmonious look of the knife. It also features a lanyard loop and a flip-over clip
Intended use: Gentleman/EDC
Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Satin
Handle: walnut wood
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 95g.
Closure: Liner Lock
Clip: in titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6004NO -
Viper - Vale knife by Vox - Purple Dark Carbon Fiber - MagnaCut - V6006FCP - knife
Intended use: Gentleman/EDC
Type of production: Industrial
Blade production: Italy
Blade: CPM MagnaCut steel
Blade Treatment: Stonewashed
Handle: Purple Dark Carbon Fiber
Blade length: 68mm.
Blade thickness: 4mm.
Closed length: 111mm.
Total length: 184mm.
Closed thickness: 15mm.
Balancing: -
Weight: 105g.
Closure: Liner Lock
Clip: in anodized titanium
Scabbard: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6006FCP -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collectionAP-FRANK-TI -
Viper - Twin CN - Slipjoint by Fabrizio Silvestrelli - M390 - Micarta Natural - V6002CN - knife
Intended use: Sporting/EDC
Production type: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: Titanium insignia, Micarta Natural grips
Blade length: 77mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 176mm.
Thickness when closed: 10mm.
Weight: 77g.
Closure: Slipjoint
Sheath: Leather
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV6002CN -
Viper - Orso 2 by Jens Anso - Dark Stonewashed Titanium - V5997TI - Knife
Intended Use: Sporting/Collection
Production type: Industrial
Country of Production: Italy
Blade: Sintered stainless steel Lohmann LO-QPM20-4
Blade finish: Dark Stonewashed
Handle: GR5 Dark Stonewashed Titanium with anodized titanium spacer
Blade length: 95mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 208mm.
Thickness when closed: 12mm.
Weight: 137g.
Closure: Frame Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jens AnsoV5997TI -
Viper - Hug by Sacha Thiel - M390 Bronze Stars - V5990DBRS - knife
Intended Use: Sporting/EDC
Type of production: Industrial
Country of Production: Maniago - Italy
Blade: Bohler M390 Microclean stainless steel, HRC 59/61
Blade treatment: Satin finish
Handle: bronze, dark stonewashed, CNC machined, with Stars design
Blade length: 71mm.
Blade thickness: 3mm.
Length closed: 112mm.
Total length: 184mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Slipjoint
Sheath: leather
Packaging: cardboard box with Viper Knives logos
Notes: Design by Sacha ThielV5990DBRS -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Viper - Turn knife by Silvestrelli - Titanium and Micarta - M390 steel - V5986CG - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: M390 60 / 61HRC stainless steel
Blade treatment: Satin finish
Handle: titanium with micarta grips
Blade length: 80mm.
Blade thickness: 4mm.
Closed length: 107mm.
Total length: 190mm.
Thick when closed: 14mm.
Weight: 123g.
Closure: Back Lock
Clip: titanium
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5986CG -
Viper - Dan2 by Tommaso Rumici - Bocote - V5930BC - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Lama: Italy
Blade: In stainless steel N690Co 57 / 59HRC
Blade treatment: Satin
Handle: Bocote wood with internal 420C liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 182mm.
Weight: 90g.
Closure: patented Action Stopper system
Clip: Satin stainless steel
Packaging: cardboard box with Viper logos
Notes: Design by Tommaso RumiciV5930BC -
Viper - Katla by Vox - 3D Satin Titanium - V5982TI3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Stonewashed
Handle: Satinized titanium 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 137g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5982TI3D -
Viper - Katla by Vox - 3D Marbled Carbon Fiber - V5980FCM3D - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which revives the Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotation mechanism is given by thrust bearings, and can be opened with the double peg for the thumb, or with the very fast pinball machine.
The detail that characterizes the Katla is the 3D processing of the handle on both ends of the cheek which recalls, reworking them in a modern key, the insignia of the most classic Viper models.
The flat edges and the titanium clip allow a comfortable and discreet port.
Intended use: EDC / SportsType of production: Industrial
Country of production: Italy
Blade: M390 60 / 61HRC stainless steel
Blade finish: Satin
Handle: Carbon fiber with 3D processing
Blade length: 82mm.
Blade thickness: 4mm.
Length closed: 116mm.
Total length: 198mm.
Weight: 105g.
Closure: Liner Lock
Clip: titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening via Carson Flipper system on ball bearingV5980FCM3D -
Viper - Drop Montone by Fabrizio "Silvester" Silvestrelli - V5700MO knife
Intended use: sportsman / gentleman
Type of production: industrial
Lama production: Italy
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: ram horn, with liners embedded in stainless steel
Blade length: 49mm.
Blade thickness: 3mm.
Length closed: 75mm.
Thick when closed: 12mm.
Total length: 125mm.
Balancing: -
Weight: 60g.
Closure: Liner Lock
Clip: -
Sheath: black leather case
Notes: design by Fabrizio SilvestrelliV5700MO -
Viper - Belone knife by Vox - Carbon Titanium - frame lock - V5970TIFC - knife
In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with its well-kept ergonomics, has an anodized titanium structure, enclosed in thin carbon fiber folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.Intended use: Gentleman / EDC
Type of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium and carbon fiber
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 78g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970TIFC -
Viper - Belone knife by Vox - Titanium Blue frame lock - V5970BLTI - knife
In designing the Belone, the Danish Jesper Voxnaes started from typical lines of the Italian regional tradition, perfectly reworked according to his modern and minimalist style that made him famous all over the world. The result is a light and tapered folding knife, embellished with refined details, such as the holes in the back of the handle.
The Böhler M390 Microclean steel gives the Belone excellent cutting properties, and the ball bearings make it the opening with the very fast pinball machine, perfectly integrated into the overall design. The handle, with well-kept ergonomics, has an anodized titanium structure, enclosed in thin titanium folders.
The Belone clip is attached to the spacer so that the knife disappears completely into the pocket, maintaining maximum discretion.
Intended use: Gentleman / EDCType of production: Industrial
Lama production: Italy
Blade: Stainless steel M390 60-61 hrc
Lama treatment: Stonewashed
Handle: Titanium
Blade length: 85mm.
Blade thickness: 3.4mm.
Length closed: 114mm.
Total length: 200mm.
Thick when closed: 11.3mm.
Balancing: -
Weight: 87g.
Closure: Frame Lock
Clip: titanium anodized
Sheath: -
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5970BLTI -
Viper - Novis by Silvestrelli - titanium bolsters and ziricote wood - V5974ZI - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Satin
Handle: ziricote wood with heads and spacer in GR2 Titanium
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 179mm.
Thick when closed: 16mm.
Weight: 135g.
Washers: in steel and bronze, with ball bearings
Closing: Liner Lock in stainless steel 1.4116
Clip: -
Sheath: -
Packaging: Cardboard box with Viper Knives logos
Notes: Design by Fabrizio SilvestrelliV5974ZI -
Viper - Storm by Hinderer - G10 Green Stone Washed - V5954GG - Knife
Purpose: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Stone Washed
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick HindererV5954GG -
Viper - Storm by Hinderer - Carbon Fiber Satin - V5954FC - knife
Purpose: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: Carbon Fiber and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Closed thickness: 15mm.
Weight: 118g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Notes: Design by Rick Hindererer Knives logos
Notes: Design by Rick HindererV5954FC -
Viper - Storm by Hinderer - Black G10 Satin - V5954GB - knife
Purpose: Sports / EDC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel M390 60 / 61HRC
Blade Treatment: Satin
Handle: G10 and Titanium
Blade Length: 78mm.
Blade thickness: 4mm.
Closed length: 117mm.
Total length: 195mm.
Thickness: 15mm.
Weight: 122g.
Opening: Carson Flipper system or ambidextrous pin on the blade
Washers: steel and bronze, with ball bearings
Closure: FrameLock
Clip: Titanium, removable and reversible
Sheath: -
Packing: Cardboard box with Viper Knives logos
Remarks: Design by Rick HindererV5954GB -
Viper - Fortis by Vox - Black G10 - V5952GB - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Italy
Blade: stainless steel M390 60 / 61HRC
Blade treatment: Stonewashed
Handle: Titanium and G10
Blade length: 86mm.
Blade thickness: 4mm.
Closed Length: 124mm.
Overall length: 210mm.
Thick when closed: 18mm.
Weight: 110g.
Lock: Frame Lock with steel casement
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV5952GB -
Viper - Dan1 by Tommaso Rumici - Green G10 - V5928GGR - knife
Intended Use: Sport / EDC
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment : Satin
Handle: G10 with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici12304 -
Viper - Dan1 by Tommaso Rumici - Carbon Fibre - V5928FC - knife
Intended Use: Sport / EDC
Type of production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: Satin
Handle: Carbon Fiber with 420C inner liners and anodized GR2 titanium spacer
Blade length: 73mm.
Blade thickness: 3mm.
Length closed: -
Overall length: 182mm.
Thick when closed: -
Balancing: -
Weight: 90g.
Closing: Action Stopper patented system
Clip: Stainless steel satin
Packaging: cardboard box with Viper logos
Notes: Design by T. Rumici12289 -
Boker Plus - Jim Wagner Reality-Based Blade - PRIVATE COLLECTION - 01BO053
Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO053 -
Viper - Bergamasco Bosso by Fabrizio "Silvester" Silvestrelli - V5744BO - coltello regionale
Coltello tipico delle valli bergamasche, in uso sin dalla prima metà dell’ottocento. E' considerato uno dei più bei coltelli di antoca tradizione regionale per le sue caratteristiche forme e proporzioni.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Legno di Bosso
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 96g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2775BO -
Viper - Bergamasco Cocobolo by Fabrizio "Silvester" Silvestrelli - V5744CB - coltello regionale
Coltello tipico delle valli bergamasche, in uso sin dalla prima metà dell’ottocento. E' considerato uno dei più bei coltelli di antoca tradizione regionale per le sue caratteristiche forme e proporzioni.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Legno di Cocobolo
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 96g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2775CB -
Viper - Boletus - Cattle Horn Tip by Fabrizio Silvestrelli - V5600PC - Mushroom Knife
NOTE: The bovine horn used to make the handle is a natural material; the colorations, shades and veins present may vary from what is displayed in the photo in this product sheet
Intended use: knife for mushroom picking
Type of production: industrial
Country of manufacture: Italy
Blade: Nitro-B stainless steel
Blade finish: Satin finish
Handle: Cattle Horn Tip
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" SilvestrelliV5600PC -
Viper - Boletus Cocobolo Wood by Fabrizio Silvestrelli - V5600CB - Mushroom Knife
Intended use: Knife for collecting mushrooms
Type of production: industrial
Country of Production: Italy
Blade: Nitro B stainless steel
Blade finish: Satin finish
Handle: Cocobolo wood
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 110mm.
Total length: 180mm.
Weight: 100g.
Closure: double spring retention Action Stopper System (Slipjoint)
Clip: -
Sheath: leather pocket
Notes: closable mushroom brush made of badger hair - Design by Fabrizio "Silvester" SilvestrelliV5600CB -
Viper - Gobbo Corno Bovino by Fabrizio "Silvester" Silvestrelli - V5746PC - coltello regionale
Coltello tipico dell'abruzzo, del molise e del basso lazio, in uso sin dal primo ottocento. E' caratterizzato da una lama a foglia di canna, stretta ed appuntita e da un manico piegato ad assumere la curvatura del gobbo.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A
Trattamento Lama: -
Manicatura: Punta di corno bovino
Lunghezza lama: 87mm.
Spessore lama: 3mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 86g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2835CO -
Viper - Gobbo Olivo by Fabrizio "Silvester" Silvestrelli - V5746UL - coltello regionale
Coltello tipico dell'abruzzo, del molise e del basso lazio, in uso sin dal primo ottocento. E' caratterizzato da una lama a foglia di canna, stretta ed appuntita e da un manico piegato ad assumere la curvatura del gobbo.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: in acciaio inox 440A
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 87mm.
Spessore lama: 3mm.
Lunghezza chiuso: 112mm.
Lunghezza totale: 200mm.
Spessore da chiuso: 15mm.
Bilanciatura: -
Peso: 86g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2835OL -
Viper - Maremmano Cherrywood by Fabrizio "Silvester" Silvestrelli - V5742CI - regional knife
Typical knife in the Tuscan and Lazio Maremma, which has been in use since the first half of the nineteenth century. It is present in the criminological museum of Rome. It was used by the rebels of the criminal baths of Civitavecchia.
Purpose: Regional / Sportsman
Type of production: Industrial
Blade production: Italy
Blade: Stainless steel N690Co 57 / 59HRC
Blade Treatment: -
Handle: Cherry Wood
Blade Length: 85mm.
Blade thickness: 3mm.
Closed length: 115mm.
Total length: 200mm.
Closure thickness: -
Balance: -
Weight: 85g.
Closure: double spring retention on inner liners
Clip: -
Sheath: Suede leather bag with Viper logos
Packing: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2774CI -
Viper - Maremmano Corno by Fabrizio "Silvester" Silvestrelli - V5742PC - coltello regionale
Coltello tipico della maremma toscana e laziale, in uso sin dalla prima metà dell’ottocento. Presente nei reperti del museo criminologico di Roma, usato dai rivoltosi dei bagni penali di Civitavecchia.
Destinazione d'uso: Regionale / Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox N690Co 57/59HRC
Trattamento Lama: -
Manicatura: Punta di corno bovino
Lunghezza lama: 85mm.
Spessore lama: 3mm.
Lunghezza chiuso: 115mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 90g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2774C -
Viper - Senese Corno by Fabrizio "Silvester" Silvestrelli - V5740PC - regional knife
Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. It is characterized by a blade with a typical scimitar or "French" shape.
Intended use: gentleman / collection
Type of production: Industrial
Lama production: Italy
Blade: 440A stainless steel 55 / 57HRC
Blade treatment: -
Handle: bovine horn horn tip (ATTENTION: since it is a natural material, the color may change with respect to the knife photographed)
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balancing: -
Weight: 104g.
Closure: double retention spring on the internal liners
Clip: -
Sheath: suede leather bag with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered copies with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2770C -
Viper - Senese Olive Wood by Fabrizio "Silvester" Silvestrelli - V5740UL - Knife
Knife typical of the city of Siena and the Tuscan countryside, in use since the first half of the nineteenth century. E 'characterized by a blade with typical shape of a scimitar, or "French".
Intended use: gentleman / collection
Type of production: Industrial
Production Blade: Italy
Blade: 440A stainless steel 55/57HRC
Treatment Lama: -
Handle: olive wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thick when closed: 17mm.
Balance: -
Weight: 104g.
Clasp: double-retention spring on the inner liners
Clip: -
Sheath: leather suede bag with logos Viper
Packaging: box of black cardboard with silver logos, warranty certificates
Notes: numbered copies with a limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2770U -
Viper - Slim - Cervo - V5350CEB - coltello
Viper - Slim Cervo
Questo splendido gentleman dalla grande cura costruttiva e dalle ottime finiture ribadisce, nel caso ce ne fosse ancora bisogno, che Viper non solo sa curare il prodotto nei minimi particolari, ma riesce sempre a trovare soluzioni estetiche raffinate e all'avanguardia al tempo stesso.
Lama: Acciaio Sandvik 12C27 satinata
Corpo: Acciaio
Chiusura: Frame Lock
Lunghezza chiuso: 7.5cm.
Lunghezza aperto: 12.5cm
Lunghezza lama: 4.5cm.
Peso: 35g.
Clip: Acciaio
Manicatura: Cervo1313 -
Viper - Vernante Corno by Fabrizio "Silvester" Silvestrelli - V5748CO - regional knife
A typical Piedmontese knife originating from the village of Vernante, in the province of Cuneo, in use since the beginning of the 19th century also in nearby Liguria. It is characterised by a forged button on the upper part of the blade's heel, which allows it to fit into the hollow of the handle with the blade open, acting as a stop.
Intended use: Regional/Collection/Sporting
Type of production: Industrial
Blade Production: Italy
Blade: Stainless steel 440A 55/57HRC
Blade Treatment: -
Handle: Bovine horn tip
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: 113mm.
Total length: 200mm.
Thickness when closed: -
Balance: -
Weight: 100g.
Closure: Double retention spring on inner liners
Clips: -
Sheath: Suede leather pouch with Viper logos
Packaging: black cardboard case with silver logos, warranty certificates
Notes: numbered examples with limited edition of 1,000 pieces - Design by Fabrizio "Silvester" Silvestrelli2837CO -
Viper - Vernante Palissandro by Fabrizio "Silvester" Silvestrelli - V5748PA - coltello regionale
Coltello tipico piemontese originario del paese di Vernante, in provincia di Cuneo, in uso sin dall’inizio dell’ottocento anche nella vicina Liguria. E' caratterizzato da un bottone forgiato sulla parte superiore del tallone della lama che ne permette l’alloggiamento nell’incavo del manico a lama aperta, fungendo da battuta.
Destinazione d'uso: Regionale/Collezione/Sportivo
Tipo di produzione: Industriale
Produzione Lama: Italia
Lama: In acciaio inox 440A 55/57HRC
Trattamento Lama: -
Manicatura: Legno di Palissandro
Lunghezza lama: 90mm.
Spessore lama: 3mm.
Lunghezza chiuso: 113mm.
Lunghezza totale: 200mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 100g.
Chiusura: doppia molla di ritenzione sui liners interni
Clip: -
Fodero: sacchetto in cuoio scamosciato con loghi Viper
Confezione: astuccio di cartone nero con loghi argento, certificati di garanzia
Note: esemplari numerati con tiratura limitata a 1.000 pezzi - Design by Fabrizio "Silvester" Silvestrelli2837PA -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
Viper - Katla Knife by Vox - Damascus - Dark Matter Carbon Fiber - Limited Edition - VA5980FCM - Knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, which brings back the Tanto profile blade with a bevel that enhances the excellent cutting qualities.
The rotation mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern way, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Super Dense Twist stainless Damascus
Blade finish: Satin
Handle: Dark matter carbon fiber
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 122g.
Lock: Liner Lock
Clip: Titanium
Packaging: Deluxe cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearing - Damascus SSCT spacer - limited edition of 100 piecesVA5980FCM -
Viper - Katla by Vox - Black Canvas Micarta - V5982CB - knife
Katla, designed by Jesper Voxnaes, is a liner lock folding knife, featuring a Tanto profile blade with a bevel that enhances the excellent cutting qualities of the Böhler M390, hardened at 59/61 HRC.
The rotating mechanism is provided by thrust bearings, and it can be opened with either the double thumb stud or the very fast flipper.
The detail that characterizes the Katla is the 3D processing of the handle at both ends of the bolster, which reinterprets in a modern key, the inlays of the classic Viper models.
The flat edges and the titanium clip allow for comfortable and discreet carry.
Intended use: EDC / Sport
Type of production: Industrial
Country of production: Italy
Blade: Stainless steel M390 60/61HRC
Blade finish: Stonewashed
Handle: Walnut
Blade length: 82mm.
Blade thickness: 4mm.
Closed length: 116mm.
Total length: 198mm.
Weight: 107g.
Lock: Liner Lock
Clip: Titanium
Packaging: Cardboard box with Viper logos
Notes: Design by Jesper Voxnaes - opening with Carson Flipper system on ball bearingV5985NO -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Chris Reeve - Small Sebenza Knife - Unique Graphic Black Onyx - BG42 Steel - PRIVATE COLLECTION
Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: CollectionProduction Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificatesCR-SS21APUG -
Viper - Keeper 2 by Fabrizio Silvestrelli - Elmax & Green Canvas Micarta - V6000CG - knife
Intended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: Elmax SuperClean 59/61HRC stainless steel
Blade Finish: Stonewashed
Handle: canvas micarta handle, 1.4116 stainless steel liners and GR2 titanium spacer
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 115mm.
Total length: 210mm.
Weight: 145g.
Closure: liner lock with integrated Smart Automatic Safe Lock System.
Clip: stainless steel 1.4116, removable and reversible
Packaging: cardboard box with Viper logos
Notes: Design by Fabrizio "Silvester" SilvestrelliV6000CG -
Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryBlade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without boxAP-GE-APP -
SOG - Vulcan Black TiNi - VL11 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collectionSOGVL11-CP -
Zero Tolerance - MUDD Folding Knife - ZT0500 - PRIVATE COLLECTION - knife
Knife withdrawn from private collection - Rare model no longer in production.
The Zero Tolerance 0500 model, also known as MUDD, was designed by Grant and Gavin Hawk. This knife is resistant to sand, dirt, and water thanks to the neoprene seals around the pivot and the lock.
The blade is coated in Tungsten DLC, approximately 9.2 cm long, and made of 154CM steel.
The handle is made of aluminum with textured G-10 grips, providing a solid grip.
This model was manufactured roughly between 2007 and 2009, and although the exact number of pieces produced is not known, estimates suggest a low quantity, probably between 1000 and 2500 units.
NOS FULL SET KNIFE, NEW FROM STOCK
Type: withdrawn from private collection
Condition: Like new
Available in the market: Out of production since 2009
Sharpening: Factory
Marks on blade: No
Marks on handle: No
Box: Included
Sheath: -
Manuals, Certificates, and Guarantees: Included
Checked and Certified by our internal laboratoryAP-ZT0500 -
Chris Reeve - Umnumzaan Clip Point - 2015 NOS Full Set - PRIVATE COLLECTION - knife
KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 2015 NOS new old stock - New from stock
* Condition: Like new, never taken out of original packaging.
* Commercially available: Hard to find
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / Collection
Production Type: Mid-Tech
Country of Production: USA
Blade: Stainless steel CPM-S35VN 58/59HRC
Blade finish: stonewashed
Handle: Titanium 6AI4V
Blade length: 90mm.
Blade thickness: 3.5mm.
Length closed: 123mm.
Total length: 212mm.
Thickness when closed: 17mm.
Weight: 142g.
Closure: Frame Lock
Clip: stainless steel
Packaging: white cardboard box with Chris Reeve logos, Warranty certificates
Notes: NOS knife, new from stock - Includes box and certificatesCR-UMC-CP -
Chris Reeve - Ti-Lock Stone Washed - NOS Full Set - PRIVATE COLLECTION - folding knife
NOS FULL SET KNIFE, NEW FROM STOCK
* Type: 2001 NOS new old stock - New from stock.
* Condition: Like new, never taken out of original packaging.
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The Ti-Lock mechanism was originally designed to isolate the locking mechanism from the handle of the knife so that it can offer greater freedom of design. Totally ambidextrous, the Ti-Lock is not meant to be a mere exercise in style, but should be understood as a mechanical innovation and a solid and reliable testament to the passion of Chris Reeve and Grant and Gavin Hawk.
Intended Use: Sporting/Collection
Type of production: Semi-manufactured
Country of Production: USA
Blade: CPM-S35VN 58/59HRC stainless steel
Blade Treatment: Stonewashed
Handle: Titanium 6AI4V Stone Washed
Blade Length: 82.5mm.
Blade Thickness: 3.2mm.
Length closed: 100mm.
Total length: 182.5mm.
Weight: 85g.
Closure: Ti-Lock titanium 6AI4V
Clip: Titanium 6AI4V
Packaging: Cardboard box with Chris Reeve logos, certificates
Notes: Design by Grant and Gavin Hawk - NOS knife, new from stock - Includes box and certificatesCR-TILSW-CP -
Al-Mar - Hawk - Iron Wood 1002 Full Set - PRIVATE COLLECTION - Vintage knife
KNIFE TAKEN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition, close to new
* Commercially available: Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Some small hairline on heads and metal insert
* Box: Present - Original
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: - - Original
* Checked and certified by our in-house laboratory
Intended Use: Gentleman / Collection
Production type: Industrial
Country of manufacture: Seki - Japan
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: iron wood, nickel silver insert, stainless steel heads and brass folders
Blade length: 64mm.
Blade thickness: 2mm.
Length closed: 85mm.
Total length: 147mm.
Weight: 53g.
Closure: Back Lock
Sheath: Nylon, with belt loop and Velcro closure
Packaging: Cardboard box with Al Mar logos
Notes: Previously purchased - Near mint condition - Full SetAM-1002CP -
Al-Mar - SERE Attack 3003/B - PRIVATE COLLECTION - vintage knife
Rare knife produced by the Japanese Al-Mar in the late 80s and early 90s, now out of production and no longer available. Knife withdrawn from private collection and out of production - Knife slightly used, with small shallow marks on the left side of the blade, original leather sheath never used and never worn, including box (not original). The rubber grip has a slight break, with a small missing part, in the upper right rear part, near the corrugation. - Checked, re-sharpened and certified by our internal Collini Cutlery laboratory.
Intended use: Collection / Tactical
Type of production: Industriae
Country of production: Japan, Seki
Blade: AM-6 stainless steel
Blade treatment: satin finish
Handle: in rubber, with brass spacers
Blade length: 110mm.
Blade thickness: 4mm.
Length closed: 150mm
Total length: 255mm.
Weight: 320g.
Closing: Back Lock
Sheath: leather, new
Packaging: cardboard box, with Japanese logos, but not original Al-Mar
Notes: withdrawn from private collection - used - re-sharpened - with "DEOPPRESSOLIBER" logo on the left headAM-3002DOL -
Viper - Vale by Vox - UltreX SureTouch & CPM MagnaCut - V6006GG - knife
Connoisseurs know the value of a good knife. Viper honors this thought with the Vale as a high-quality EDC knife with selected materials. The MagnaCut blade opens smoothly via the thumb stud and is locked by the sturdy liner lock. The handle uses the brand new UltreX composite, a perfect material for modified G-10 handles.
SureTouch is a revolutionary new patent-pending process that combines layers of G-10 with rubber. Now you can have the strength and durability of G-10 with the grip and non-slip properties of rubber, all in one material.
The combination of G-10 and rubber offers one of the most revolutionary advantages on the market. Because G10 is commonly processed for the knife and gun industry, this new material allows for greater ease of use. SureTouch allows for improved grip and comfort.
Intended Use: Gentleman/EDC
Type of production: Industrial
Country of manufacture: Italy
Blade: CPM MagnaCut 61/62HRC steel
Blade Finish: Stonewashed
Handle: UltreX SureTouch (modified G10 with rubberized, non-slip exterior)
Blade length: 75mm (cutting edge of 68mm.)
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 184mm.
Thickness when closed:15mm.
Weight: 105g.
Closure: Liner Lock
Clip: anodized titanium
Packaging: cardboard box with Viper logos
Notes: Design by Jesper VoxnaesV6006GG