Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Spyderco - Silverax - CPM-S30V & Carbon Fiber - PRIVATE COLLECTION - C228CFP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: New
* Commercially available: Discontinued
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S30V
Blade Finish: Satin finish
Handle: Carbon Fiber and G10 Laminate
Blade Length: 88mm.
Blade thickness: 3.5mm.
Length closed: 118mm.
Total length: 203mm.
Weight: 94g.
Closure: Compression Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC228CFP-CP -
Spyderco - Pattada - N690Co & G10 - PRIVATE COLLECTION - C204GP - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: In very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks above the opening hole, right side blade (see photo)
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / CollectionType of Production: Industrial
Country of Production: Italy
Blade: Stainless steel N690Co
Blade finish: Satin finish
Handle: Stainless steel and G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 121mm.
Total length: 221mm.
Weight: 119g.
Closure: Liner Lock
Clip: stainless steel, flush, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: previously purchased knife, from private collectionC204GP-CP -
Spyderco - Smock - New Pivot 2024 - S30V & Carbon Fiber/G10 - C240CFP - knife
Kevin Smock is an award-winning industrial designer who is making waves with his visionary handcrafted custom knives. Based on his SK23, the Spyderco Smock translates his innovative style into a high-quality production knife.
The Smock's most unique feature, however, is the push-button release of its high-strength Compression Lock mechanism, which allows the knife to close securely and easily without getting your fingers near the edge of the blade. Subtle, innovative and distinctly different, the Smock reflects Kevin Smock's unique approach to knife making.
Intended Use: Sporting/EDC
Type of production: Industrial
Country of manufacture: Taiwan
Blade: stainless steel CPM-S30V
Blade Finish: double satin finish, both horizontal and vertical
Handle: laminated carbon fiber and G10
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 115mm.
Total length: 200mm.
Thickness when closed: 11mm.
Weight: 104g.
Closure: Compression Lock
Clip: Stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: front flipper opening system on ball bearings - new 2024 version with revised and increased pivotC240CFP -
Spyderco - Lil' Matriarch - Serrated Black FRN - PRIVATE COLLECTION - C162SBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Like new, packaging slightly damaged
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: EDC / RescueProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: FRN
Blade length: 75mm.
Blade thickness: 2mm.
Length closed: 107mm.
Total length: 180mm.
Weight: 70g.
Closure: Back Lock
Clip: stainless steel
Packaging: Cardboard box with Spyderco logos
Notes: -C126SBK-CP -
Spyderco - Endura 4 Stainless Steel Plain Edge - C10P - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously purchased
Condition: in like-new condition
Commercial availability: Available
Sharpening: Factory
Blade marks: -
Handle marks: -
Box: Present
Sheath: -
Manuals, Certificates, and Guarantees: Present
Checked and Certified by our in-house laboratory
Intended Use: SportingProduction Type: Industrial
Blade: VG-10 stainless steel
Blade Treatment: -
Blade Production: Japan
Handle: Stainless Steel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balance: -
Weight: 161g.
Locking Mechanism: Back Lock
Clip: Removable, multiposition, stainless steel
Sheath: -
Notes: -AP-C10P -
Spyderco - Endura 4 - Half Serrated Black Blade - PRIVATE COLLECTION - C10PSBBK - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in good condition.
* Commercially available: Findable
* Sharpening: Factory.
* Marks on blade: Small abrasions on matte black finish.
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: SportingType of production: industrial
Blade: stainless steel VG-10 58HRC
Blade finish: black titan carbonitriding
Country of manufacture: Japan
Handle: black FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Weight: 106g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Notes: previously purchased knife, from private collectionC10PSBBK-CP -
Spyderco - Native 5 - CPM-S90V & Fluted Carbon Fiber - C41CFFP5 - knife
Intended Use: Sporting / Collection
Production type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S90V Powder Steel
Blade finish: Satin finish
Handle: Fluted Carbon Fiber
Blade Length: 75mm.
Blade thickness: 3.2mm.
Length closed: 102mm.
Total length: 177mm.
Weight: 79g.
Closure: Back Lock
Clip: stainless steel, removable and multi-position
Packaging: cardboard box with Spyderco logos
Notes: -C41CFFP5 -
Spyderco - Domino - CTS-XHP & Cubic Check Carbon Fiber - C172CFTIP - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: previously purchased
* Condition: Overall in very good condition
* Commercially available Discontinued, remained on the market from 2013 to 2017.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: A few small abrasion marks on the clip.
* Box: -
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended Use: Sporting / EDCProduction Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CTS-XHP
Blade finish: Satin finish
Handle: Titanium and Carbon Fiber laminated Cubic Check
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 116mm.
Total length: 195mm.
Weight: 119g.
Closure: Frame Lock R.I.L. (Reeve Integral Lock)
Clip: Multiposition and removable, stainless steel
Notes: Previously purchased knife from a private collection - Design by Eric Glesser - Opening via patented Carson Flipper system - Pivot on ball bearingsSC172CFTIP-CP -
Spyderco - Lil Temperance 3 - K390 Lightweight Knife - C69PBL3K390 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: USA
Blade: K390 steel at 64/65HRC
Blade finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 74mm.
Blade thickness: 4mm.
Length closed: 111mm.
Total length: 182mm.
Weight: 108g.
Closure: Compression Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC69PBL3K390 -
Spyderco - Salt I - H1FRN Yellow Knife - C88SYL - knife
A myth in the knife world is that out there somewhere there is a steel with high cutting capabilities that cannot rust.
A Japanese foundry recently turned this myth into reality with the introduction of a steel called H1. H1 is a PH steel, which is a precipitation-processed, hard-rolled alloy with no heat treatment and 0.1 percent nitrogen that acts like carbon in the steel matrix but does not react with chlorine to create rust.
Surprisingly, it maintains a sharp edge comparable to that of the higher quality knife steels used in the industry by most knife manufacturers.
Intended use: sub/sporting
Type of production: industrial
Country of manufacture: Japan
Blade: nitrogen steel H1
Blade finish: satin-finished
Handle: FRN
Blade length: 75mm.
Blade thickness: 3mm.
Length closed: 100mm.
Total length: 175mm.
Thickness when closed: 15mm.
Weight: 54g.
Closure: Back Lock
Clip: removable, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -SC88SYL -
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Spyderco - Endura 4 Serrated Knife - K390 Blue FRN - C10FPK390 - knife
Intended Use: Sporting
Type of production: industrial
Blade: Bohler K390 carbon steel at 64/65HRC - SERRATED
Blade treatment: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 96mm.
Blade thickness: 3mm.
Length closed: 127mm.
Total length: 222mm.
Weight: 105g.
Closure: Back Lock
Clip: removable, multi-position, stainless steel
Packaging: cardboard case with Spyderco logos
Notes: variant in FRN Blue made from Bohler K390 carbon steelC10FSK390 -
Spyderco - Manbug Wharncliffe Black TiCN - SCMBKWPBK - knife
Intended Use: Sporting/EDC
Production Type: Industrial
Blade production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Black TiCN - Titanium Carbonitride
Handle: FRN
Blade Length: 49mm.
Blade thickness: 2.5mm.
Length closed: 64mm.
Total lenght: 113mm.
Thickness when closed: 8mm.
Weight: 19g.
Closure: Back Lock
Clip: -
Package: cardboard case with Spyderco logos
Notes: -SMWBK -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Spyderco - Para 3 - CPM-S45VN and G10 Digital Camo - C223GPCMO - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: USA
Blade: Stainless steel CPM-S45VN
Blade Treatment: Stonewashed
Handle: G-10
Blade Length: 75mm.
Blade thickness: 3.7mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 96g.
Closure: Compression Lock
Clip: Stainless steel
Package: cardboard box with Spyderco logos
Notes: new 2021 version with CPM-S45VN steel and Stonewashed finishC223GPCMO-S45 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Sabrage is a special technique for opening champagne bottles with a sabre (sabre in French), usually used as a ceremonial gesture. The sabre is slid along the body of the bottle towards the neck with a sharp blow. The force of the blade striking the lip of the neck is sufficient to break the glass and separate the neck cleanly from the bottle collar which, together with the cork, is shot away by the force of the gas contained in the wine. When applied correctly, the technique is effective with any sparkling wine.
This practice became popular in Napoleonic France when the army visited the aristocratic domains belonging to the empire. The period was just after the French Revolution and the sabre was the weapon of choice for the army's light cavalry, the hussars. Given the numerous victories achieved by the army, there were many celebrations, during which it was customary to open the bottles by a convenient and easily available means. It seems that during one of these celebrations Napoleon himself said 'Champagne! In victory it is a merit; in defeat a necessity', thus encouraging its use and practice.
Champagne sabre entirely handmade in the town of Laguiole.
Authentic champagne sabre of premium Laguiole en Aubrac quality.
Unique piece of Sanvik 12C27 stainless steel, a martensitic stainless steel.
The composition of carbon and chromium offers a unique combination of properties including: very high hardness, very high wear and corrosion resistance.
White resin handle.
Each piece is a unique work of art, handmade by a craftsman.
Delivered in a gift box, manufactured in Aubrac, France
Blade: Stainless steel 12C27 mirror polished - unsharpened
Handle: WHITE RESIN
Blade length: 265mm
Total length: 405mm
Weight: 298g
Packaging: Wooden box with Laguiole en Aubrac logos.
C1S99OC -
Spyderco - Endela - Plain Black - C243PBK - Knife
Intended use: Sporting
Type of production: industrial
Blade: Stainless steel VG-10
Blade finish: satin finish
Country of manufacture: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 87mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 206mm.
Thickness when closed: 15.5mm.
Weight: 88g.
Closure: Back Lock
Clip: Removable, multi-position stainless steel clip
Notes: -C243PBK -
Spyderco - Police - Half Serrated - C07PS - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade Treatment: Satin finish
Handle: Satin-finished stainless steel
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 240mm.
Thickness when closed: 8mm
Weight: 162g.
Closure: Back Lock
Clip: multi-position, removable, stainless steel
Package: cardboard box with Spyderco logos
Notes: -C07PS -
Spyderco - Para 3 CPM-SPY27 Lightweight - C223PCBL - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Usa
Blade: Stainless steel CPM-SPY27
Blade treatment: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon)
Blade Length: 75mm.
Blade thickness: 3.8mm.
Length closed: 109mm.
Total length: 184mm.
Weight: 68g.
Closure: Compression Lock
Clip: removable and reversible, flush stainless steel clip
Package: cardboard box with Spyderco logos
Notes: Special edition stainless steel CPM-SPY27, developed by Spyderco together with Crucible and used exclusively on Spyderco products - Spyderco's main aim was to improve the VG-10 steel by increasing its composition and enriching it with nitrogen, niobium, vanadium and additional carbon by using a powder steel instead of a traditional martensitic one.C223PCBL -
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
LAGUIOLE EN AUBRAC is one of the five blacksmiths that still forge knives around the village of Laguiole in southern France according to a centuries-old tradition and turn them into real gems of craftsmanship. Each piece is unique and from wood to mammoth ivory there is hardly any limit to the exclusivity of the materials. Laguiole en Aubrac - acacia board with cheese cutting wire and cheese knife A set of the extra class for every cheese connoisseur and lover of a well-tended cheese platter.
The simple rectangular acacia wood board has a groove and a cutting wire with a stainless steel bracket.
The set also includes the cheese knife with a classic shape, ornament and bee. High-gloss polished stainless steel jaws. This cheese knife is also available in buffalo horn and different types of wood. Suitable for all Laguiole en Aubrac cutlery. The set is delivered in a elegant paper box.
Manufacturer: Laguiole en Aubrac
Handcrafted French Classical cheese knife - 24.5 cm
Blade 12,5 cm
12C27 stainless steel Corn handle.
SETFRGM -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Ref.C2I99CQMIH - Oyster knife with mussel shell handle Presitigioso Open Oysters Laguiole En Aublrac.
Handcrafted realization
Blade: 12C27
Stainless Steel Handle: in shell of mussels.
Blade length: 60 mm.
Blade thickness: 3 mm. T
otal length: 180 mm.
Packaged in an elegant wooden box.
8169C -
Spyderco - Emphasis - C245GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 91mm.
Blade thickness: 3mm.
Length closed: 122mm.
Total length: 211mm.
Weight: 147g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C245GP -
Spyderco - Insistent - C246GP - folding knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13MoV stainless steel
Blade finish: Satin finish
Handle: Stainless steel and G-10
Blade length: 63mm.
Blade thickness: 3mm.
Length closed: 94mm.
Total length: 155mm.
Weight: 113g.
Closing system: Liner Lock
Clip: Removable and multi-position, in stainless steel
Packaging: cardboard box with Spyderco logos
Note: -C246GP -
Spyderco - Dragonfly 2 Wave - Emerson Opener - C28GYW2 - knife
Intended use: sports
Type of production: Industrial
Country of production: Japan
Blade: VG-10 stainless steel
Blade treatment: Satin finish
Handle: FRN with stainless steel drowned folders
Blade length: 57mm.
Blade thickness: 2.5mm.
Closed length: 84mm.
Total length: 141mm.
Weight: 37g.
Opening: via Emerson Wave system or through the "SpyderHole" blade recess
Closure: Back Lock
Clip: stainless steel, removable and reversible
Sheath: -
Packaging: Cardboard box with Spyderco logos
Note: -C28GYW2 -
Spyderco - Shaman - Black PVD Plain Edge - C229GBK - knife
Intended use: Sports
Type of production: Industrial
Country of production: Usa
Blade: Stainless steel CPM-S30V Powder Steel
Blade treatment: Black PVD
Handle: G10 with 3D machining and stainless steel liners
Blade length: 91mm.
Blade thickness: 3.8mm.
Length closed: 119mm.
Total length: 210mm.
Weight: 147g.
Closure: Compression Lock
Clip: stainless steel
Packaging: cardboard box with Spyderco logos
Notes: Model inspired by the Native, with a size of about 20%C229GBK -
Laguiole En Aubrac - Olive Wood Stainless Steel Wine and Cheese Set in box 3 Pieces
Laquiole En Aubrac Waiters Corkscrew Wine Opener Forged stainless steel blades Olive wood handles, finished by hand Unique Laguiole is pronounced "Laiole" is a village in France renewed for its artisanal hand finished cutlery. Inspired by this region of the world , this set has preserved the craftsmanship in its manufacturing process. The metal is forged then finished and assembled by hand. The Ulive Wood access add the finishing touch to this big-quality laguiole product. Laguiole Set of Wine and Cheese Set Stainless steel blades Smooth easy grip wood handles Unique wood veneer Stone Finished steel blade and Ulive wood hadles Built to last with with quality materials. Olive wood is exceptional quality Veneer handle is implanted with phenolic thermosetting resins which creates a durable dimension stable handle Moisture resistant finishes last a lifetime The color in the Olive wood and grain structure creates unique to each piece Wooden presentation box 2 knives lenght 24cm cheese/ 18cm butter1253SET -
Spyderco - Alcyone - C222GPGY - knife
Purpose of use: Sport
Type of production: Industrial
Country of production: China
Blade: stainless steel CTS-BD1
Blade Treatment: Satin
Handle: Stainless Steel and G-10
Blade Length: 74mm.
Blade thickness: 3mm.
Closed length: 105mm.
Overall length: 179mm.
Closed thickness: 16mm.
Weight: 93g.
Closure: Liner Lock
Clip: Removable and reversible, stainless steel
Packing: cardboard box with Spyderco logos
Notes: -C222GPGY -
Spyderco - Delica - Wharncliffe Plain - C11FWCBK - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 68g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat GroundC11FWCBK -
Spyderco - Efficient - C216G - knife
Intended use: Sports
Type of production: Industrial
Production Country: China
Blade: 8Cr13MoV Stainless Steel
Blade treatment: Satin finish
Handle: Stainless steel and G-10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 104mm.
Overall length: 180mm.
Thick when closed: 16mm.
Balancing: -
Weight: 116g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Packaging: cardboard box with Spyderco logos
Notes: -C216G -
Laguiole en Aubrac - Set of 3 grey glitter resin Cheese Knives
Laguiole GREY GLITTER RESIN Cheese Knives - Laguiole En Aubrac, Set of 3 These heirloom-quality knives, designed to last a lifetime and crafted by French artisans with the highest-quality materials, make a truly special gift for wedding or corporate events, finely crafted knives. An exquisite gift or elegant complement to your wine & cheese fete. Each set includes 3 knives packaged in a wooden storage box. The blades are forged from ultrastrong Sandvik steel. The handles are handcrafted from ;grey glitter resin Made in France's Laguiole region. Includes a certificate of authenticity and a lifetime warranty. Set includes 3 pieces: plane, knife and soft cheese spreader. Size (inches): 1 1/2w x 9h (plane), 1w x 9 1/4h (knife), 1w x 7 1/4h (soft spreader) Genuine Laguiole en Aubrac grey glitter resin cheese knives are hand-made in France by master craftsmen and guaranteed for life.5551CORIAN -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Spyderco - Delica Flat Ground - Zome Green - C11ZFPGR - knife
Intended use: Sports
Type of production: Industrial
Production Country: Japan
Blade: VG-10 58HRC stainless steel
Blade treatment: satin finish
Handle: FRN liners with embedded stainless steel
Blade length: 75mm.
Blade Thickness: 2.5mm.
Closed Length: 107mm.
Overall length: 180mm.
Weight: 66g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Sharpening Flat Ground12638 -
Spyderco - Endura Flat Ground - Zome Green - C10ZFPGR - Knife
Intended use: Sports
Type of production: Industrial
Blade: Stainless Steel VG-10
Blade treatment: satin
Production Country: Japan
Handle: FRN liners with embedded stainless steel
Blade length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Overall length: 220mm.
Thick when closed: 15.5mm.
Weight: 94g.
Lock: Back Lock
Clip: removable, multi-position, stainless steel
Notes: Full-Flat GrindC10ZFPGR -
Spyderco - Ronin 2 by Michael Janich - FB09G2 - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Full Tang, Stainless Steel CTS-BD1
Blade treatment: Satin finish
Handle: G10
Blade length: 104mm.
Blade thickness: 3mm.
Overall length: 199mm.
Weight: 111g.
Sheath: Boltaron (plastic) with coupling of G-Clip type
Clip: multi, stainless steel, removable and reversible
Packaging: cardboard box with Spyderco logos
Notes: Design by Michael Janich12536 -
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Spyderco - Delica Flat Ground - Orange - C11FPOR - knife
Intended use: Sporting
Type of manufacture: Industrial
Blade: Stainless steel VG-10 58HRC
Blade treatment: -
Blade production: Japan
Handle: FRN with embedded stainless steel liners
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 107mm.
Total length: 180mm.
Balance: -
Weight: 66g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC11FPOR -
Spyderco - Cat SC129GP - knife
Spyderco - Cat SC129GP - knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: Taiwan
Blade: stainless steel 440C
Treatment Lama: -
Handle: G10
Blade length: 60mm.
Blade thickness: 2.5mm.
Closed Length: 90mm.
Overall length: 150mm.
Thick when closed: 9mm.
Balancing: -
Weight: 72g.
Lock: Liner Lock
Clip: yes
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -SC129GP -
Spyderco - Dragonfly Stainless Steel - SC28P - knife
Intended Use: EDC / Sports
Type of production: Industrial
Blade Production: Japan
Blade: stainless steel VG-10
Blade treatment: -
Handle: Stainless steel
Blade length: 58mm.
Blade thickness: 2mm.
Closed Length: 80mm.
Overall length: 140mm.
Thick when closed: -
Balancing: -
Weight: 74g.
Closure: Back Lock
Clip: stainless steel, removable
Sheath: -
Packaging: Cardboard box with logos Spyderco
Notes: -SC28P -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip50004 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53161 -
Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife
Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz ScarperiaBlade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.WARNING: these are natural material, the color of the horn may be different from the one in the picture.
PBM22G -
Spyderco - Manbug Lightweight - MBK - knife
Intended Use: Sport / EDC
Type of production: Industrial
Blade Production: Japan
Blade: Stainless steel VG-10
Treatment Blade: -
Handle: FRN
Blade length: 49mm.
Blade thickness: 2.5mm.
Closed Length: 64mm.
Overall length: 113mm.
Thickness when folded: 8mm.
Balancing: -
Weight: 19g.
Closure: Back Lock
Clip: -
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -MBKP -
Spyderco - Resilience - C142GP - knife
Intended use: Sport
Type of production: Industrial
Production Lama: China
Blade: 8Cr13MoV stainless steel
Treatment Blade: -
Handle: Stainless steel and G-10
Blade length: 108mm.
Blade thickness: 3mm.
Closed Length: 133mm.
Overall length: 238mm.
Thick when closed: 16mm.
Balancing: -
Weight: 154g.
Lock: Liner Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Packaging: cardboard box with logos Spyderco
Notes: -C142GP -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife
Maremma in Olivo - Series Kilama MFO18 - knife
The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.
Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife50157 -
Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisanLama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric caseGAO18 -
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
SEAM18 -
Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50309 -
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife
Mugello 16 cm horn cattle raw E-CMC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50306 -
Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50308 -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Spyderco - Cat - Satin 440C & Schwarz G10 - SC129GP - PRIVATSAMMLUNG - Messer
MESSER AUS PRIVATER SAMMLUNG ENTNOMMEN
* Typ: Zuvor gekauft
* Zustand: Gebraucht, in gutem Zustand
* Kommerziell verfügbar: Erhältlich, aber mit verschiedenen Stählen
* Schärfung: Werkseitig geschärft
* Marks on blade: Keine
* Marks on handle: Some small signs of wear on G10
* Box: Vorhanden, aber leicht beschädigt
* Scheide: /
* Handbücher, Zertifikate und Garantien: /
* Geprüft und zertifiziert durch unser hauseigenes Labor
Verwendungszweck: Sporting/EDCProduktionsart: Industriell
Land der Herstellung: Taiwan
Klinge: 440C rostfreier Stahl
Klingenfinish: Satinierte Oberfläche
Griff: G10
Klingenlänge: 60mm.
Dicke der Klinge: 2,5 mm.
Länge geschlossen: 90mm.
Gesamtlänge: 150mm.
Dicke im geschlossenen Zustand: 9mm.
Gewicht: 72g.
Verschluss: Liner Lock
Clip: Abnehmbar und umkehrbar aus Edelstahl
Verpackung: Pappschachtel mit Spyderco-LogosSC129GP-CP -
Spyderco - Endura 4 Flat Ground - Gray - C10FPGY - knife
Intended use: Sporting
Type of manufacture: industrial
Blade: VG-10 stainless steel
Blade treatment: -
Blade production: Japan
Handle: Gray FRN with embedded stainless steel liners
Blade length: 95mm.
Blade thickness: 3mm.
Length closed: 125mm.
Total length: 220mm.
Thickness when closed: 15.5mm.
Balance: -
Weight: 94g.
Closure: Back Lock
Clip: Removable, multi-position, stainless steel
Sheath: -
Notes: Full-Flat GrindC10FPGY -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Conaz Consigli Scarperia - Arbus knife - Arburese Bovine Blonde Horn 20cm - 53021 - knife
Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017B -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Mozzetta light ox horn 50034 - knife
This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseThe craftsmanship is beautiful because it is varied
The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.50034 -
Conaz Consigli Scarperia - Pattada Brotzu knife bovine horn 22cm - 53142 - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53142 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Consigli Scarperia - Romano con anello 30cm - ox horn - 50060 - knife
The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.
Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.
Destination of use: collection
Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)Weight: 140g.
50060 -
Consigli Scarperia - Three Pianelle R-TPC20 - knife
Three Pianelle R-TPC20 - knife
Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle50071 -
Laguiole en Aubrac - 3-piece cheese set - guim blanc
Laguiole en Aubrac 3-piece cheese set - guim blanc
The knives by Laguiole en Aubrac combine the long tradition of knife makers in perfect symbiosis with a penchant for perfection, while the price, though, can be measured in worldly standards.
As is for all genuine French Laguiole knives, the traditional shepherds cross in the RESIN GUIM handle, the hand-made engravings on the spine and the bee are a must, including for this cheese set.
It is carefully manufactured by hand and reflects the French tradition and dining culture. Please hand wash (only).
5551 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1