Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Quartermaster - QSE-3DLC - Sonny Crockett DLC - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: DLC
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12207€237.70Out of stock -
Quartermaster - QSE-2MV - Ricardo Tubbs Screen Printed - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12070€270.49Out of stock -
Quartermaster - QSE-3 - Sonny Crockett - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-S35VN
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 4.5mm.
Overall length: 223mm.
Thick when closed: 14mm.
Balancing: -
Weight: 210g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12048€229.51Out of stock -
Quartermaster - QSA-1 - Boss Hog - knife
Intended use: Tactical
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: -
Handle: G-10 and stainless steel
Blade length: 101mm.
Blade thickness: 5mm.
Overall length: 260mm.
Thick when closed: 16.5mm.
Balancing: -
Weight: 284g.
Closure: Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12047€241.80Out of stock -
Quartermaster - QTR-3LT - Templeton Face Peck - Limo Tint - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Lama: 100% USA
Blade: stainless steel sintered CPM-154CM
Treatment Lama: Limo Tint Full Black
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Note: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box12045€0.00Only -99 leftOut of stock -
Quartermaster - QTR-4 - John Hannibal Smith - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless Steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 279mm.
Thick when closed: 19mm.
Balancing: -
Weight: 329g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10955€200.82Out of stock -
Quartermaster - QTR-7 - Thomas Magnum - knife
Intended use: Tactical
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered Carpenter CTS BD-4P Alloy
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 127mm.
Blade thickness: 5mm.
Overall length: 267mm.
Thick when closed: -
Balancing: -
Weight: 275g.
Closure: -
Clip: -
Sheath: Kydex Ghost transparent, thermoformed vacuum, fixed with Malice Clips, MOLLE compatible
Packaging: Cardboard box with logos Quartermaster
Note: Specimen liminata edition individually numbered on the blade and box10881€262.30Out of stock -
Quartermaster - QTR-5 - Karambit Theodore T.C. Calvin - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10 and Stainless Steel
Blade length: 50mm.
Blade thickness: 5mm.
Overall length: 152mm.
Thick when closed: 13mm.
Balancing: -
Weight: 148g.
Lock: Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10879€155.74Out of stock -
Quartermaster - QTR-3 - Templeton Face Peck - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10878€172.13Out of stock -
Quartermaster - QTR-3 - Templeton Face Peck - knife
Intended use: Tactical / EDC
Type of production: Industrial
Production Blade: 100% USA
Blade: Stainless steel sintered CPM-154CM
Treatment Blade: Stone Washed
Handle: G-10
Blade length: 70mm.
Blade thickness: 5mm.
Overall length: 178mm.
Thick when closed: 17mm.
Balancing: -
Weight: 190g.
Closure: Subliminal Frame Lock
Clip: Removable and reversible stainless steel
Sheath: -
Packaging: Cardboard box with logos Quartermaster
Notes: Opening system on ball bearings ORB Pivot System - Exemplary liminata edition individually numbered on the blade and box10877€0.00Only -99 leftOut of stock -
Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife
Roman Ring with polished horn cattle R-RMC30A - knife
Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.
Intended Use: Collection
Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -R-RMC30A -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017M