Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075€143.44Only 2 leftOnly 2 left
-
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159€122.95Only 1 leftOnly 1 left -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002€163.93Only 1 leftOnly 1 left -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143€77.87Only 2 leftOnly 2 left -
Randall Knives - Modelo 1-7" - Micarta Finger Grooves - COLECCION PRIVADA - cuchillo de coleccionista
CUCHILLO DE COLECCIÓN PRIVADA
* Tipo: Comprado Anteriormente
* Condición: Muy buen estado
* Afilado: Original
* Marcas en la hoja: Ninguna
* Marcas en el mango: Ninguna
* Embalaje: -
* Vaina: original, cuero, en muy buen estado
* Manuales, Certificados y Garantías: - - * Comprobado y certificado por nuestro laboratorio interno.
* Comprobado y certificado por nuestro laboratorio internoEl Randall Model 1 Fighter fue uno de los primeros modelos producidos en el taller de Randall en Orlando. Un Modelo 1, fabricado por el propio Bo Randall, sirvió como prototipo para la Springfield Randall que fue producida por la Northampton Cutlery Company cerca de Springfield, Massachusetts, en 1943 y 1944 para uso del ejército estadounidense.
Uso previsto: táctico / militar
Tipo de fabricación: artesanal
País de fabricación: USA
Hoja: espiga completa en acero inoxidable 440B
Acabado de la hoja: satinado
Empuñadura: protector pasante de latón y empuñadura monolítica de micarta
Longitud de la hoja: 177 mm.
Grosor de la hoja: 5mm.
Longitud total: 295mm.
Equilibrio: en la rama de la guarda
Peso: 350g.
Funda: cinturón, cuero negro
Notas: Cuchillo comprado anteriormente, retirado de colección privadaAP-RK-1-7MFG€0.00Only -20 leftOnly -20 left
Out of stock -
Andre De Villiers ADV - 2018 Ronin - S35VN & Integral Blackwashed Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: Like New
* Commercially available 2018 Exemplar; currently offering other variants in other configurations.
* Sharpening: Factory.
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory
Intended use: collectible/sporting/military
Production type: Midtech
Country of manufacture: South Africa
Blade: stainless steel CPM-S35VN
Blade treatment: blackwash
Handle: integral, machined titanium from solid, blackwash finish
Blade length: 103mm.
Blade thickness: 4.5mm.
Length closed: 132mm.
Total length: 234mm.
Thickness when closed: 16mm.
Weight: 191g.
Opening: Carson Flipper type, on ball bearings
Closure: FrameLock
Clip: titanium, machined from billet
Packaging: plastic case with ADV Tactical logos
Notes: entirely designed and built by Andre De Villiers in his own workshopADV-RBTI-CP€0.00Only -20 leftOnly -20 left
Out of stock -
Andre De Villiers ADV - Kudu Hunter Fixed - M390 & Black G10 - knife
The Kudu Hunter fixed-blade knife offers an excellent balance between form and function: the wide drop point blade is reminiscent of its predecessor model Harpoon, but without the dedicated thumb rest. The handle is extremely comfortable for different types of grips, and its shape does not cause fatigue during long periods of use. The Kydex scabbard has a Kydex belt loop that allows you to switch between normal belt carry and scout carry, right or left handed, with ease. This is truly an excellent "all-around" design by Andre.
Intended use: collection/sporting
Type of manufacture: midtech
Country of manufacture: South Africa
Blade: full tang, stainless steel M390
Blade treatment: Satin finish
Handle: Black G10
Blade length: 115mm.
Blade thickness: 4.8mm.
Total length: 228mm.
Balance: backward
Weight: 205g.
Sheath: carbon fiber-effect kydex with multi-position belt attachment
Packaging: -
Notes: designed and made entirely by Andre De VilliersADV-KH€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Double Flipper Frag Frame Knife - Black Titanium - knife
Intended use: collection / sports / militaryType of production: artisan seeds
Country of production: South Africa
Blade: N690Co stainless steel
Blade treatment: Black
Handle: Black titanium
Blade length: 100mm.
Blade thickness: 4.7mm.
Closed length: 130mm.
Total length: 226mm.
Thick when closed: 13.2mm.
Balance: 2cm set back from the guard branch
Weight: 212g.
Opening: Flipper on ball bearings
Closure: FrameLock
Clip: anodised titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-DF-B€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Harpoon Fixed knife - Black G10
Intended use: collection / sport / military
Type of production: semi-handmade
Country of production: South Africa
Blade: full tang, in N690Co stainless steel
Blade treatment: satin finish
Handle: G10
Blade length: 106mm.
Blade thickness: 4.7mm.
Total length: 228mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 216g.
Sheath: in kydex, acon Tek-Lok attacks
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-HF-CB€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Mini Butcher Back Lock Knife - Ebony Wood
Intended use: collection / sport
Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co Stainless Steel
Blade treatment: Satin
Handle: in steel, with ebony wood inserts
Blade length: 52mm.
Blade thickness: 2.2mm.
Length closed: 72mm.
Total length: 124mm.
Thick when closed: 8.5mm.
Balancing: set back
Weight: 44g.
Opening: Nail Nick
Closure: BackLock
Clip: Absent
Packaging: cordura case with ADV Tactical logos
Notes: designed and built by Andre De VilliersADV-MB-E€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Harpoon Black Fixed knife - Black G10 - knife
Intended use: collection / sport
Type of production: artisan seeds
Country of production: South Africa
Blade: in D2 steel
Blade treatment: satin finish
Handle: steel with Jaracanda briar inserts
Blade length: 75mm.
Blade thickness: 4 mm.
Length closed: 100mm.
Total length: 175mm.
Thick when closed: 14mm.
Balance: 2 cm set back from the guard branch
Weight: 120 g.
Opening: Nail Nick
Closure: Slip Joint (without blade lock)
Clip: -
Packaging: cordura case with ADV tactical logos
Notes: Designed and manufactured by Andre De VilliersADV-HF-B€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Mini Harpoon Black - Prototype - folding knife
Intended use: collection / sport / military
Type of production: semi-handmade
Country of production: South Africa
Blade: N690Co steel
Blade treatment: PVD blackwash
Handle: titanium blackwash PVD
Blade length: 77mm.
Blade thickness: 4mm.
Length closed: 102mm.
Total length: 177mm.
Thick when closed: 11.7mm.
Balancing: set back, at 2cm. from the guard branch
Weight: 108g.
Opening: Carson Flipper type on ball bearings
Closure: FrameLock
Clip: titanium, machined from solid
Packaging: cordura case with ADV Tactical logos
Notes: marked as "prototype" - designed and built by Andre De VilliersADV-MH-B€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Harpoon F17 Black knife - knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: N690Co stainless steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-HA-B€0.00Only -20 leftOnly -20 leftOut of stock -
Andre De Villiers ADV - Tac Butcher Black knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: D2 steel
Blade treatment: black stonewash
Handle: Titanium stonewash
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 222g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-TB-BW€0.00Only -50 leftOnly -50 leftOut of stock -
Andre De Villiers ADV - Pathfinder Knife G2 Black knife
Purpose: collection / sport / military
Type of production: artisanal seed
Country of Origin: South Africa
Blade: CPM SW35VN steel
Blade treatment: black
Handle: black titanium
Blade Length: 95mm.
Blade thickness: 4.5mm.
Closed length: 130mm.
Overall length: 226mm.
Closed thickness: 14mm.
Balance: 2cm back from the guard branch
Weight: 210g.
Opening: Pinballs on bearings
Closure: Frame Lock
Clip: titanium
Packing: Cordura case with ADV Tactical logos
Notes: Designed and built by Andre De VilliersADV-PA-B€0.00Only -50 leftOnly -50 leftOut of stock -
Consigli Scarperia - Roman Ring with polished horn cattle R-RMC30A - knife
Roman Ring with polished horn cattle R-RMC30A - knife
Antique knife initially in use in the Roman countryside, and then in Rome at the time of the papal city. Often, the rustic character of duels, it was designed primarily as a weapon. The blade is made of carbon steel with locking blade. The cow horn handle. Variable length. These knives are made from "Conaz" only on demand, thereby making each one as unique.
Intended Use: Collection
Type of production: craft
Blade: carbon steel
Treatment Blade: -
Production Blade: Italy
Handle: Horn Cattle Etched
Blade length: 130mm.
Blade Thickness: 2.5mm.
Closed Length: 160mm.
Overall length: 290mm.
Balancing: -
Weight: 106g.
Closure: Without Rear Blade
Clip: -
Sheath: -
Notes: -R-RMC30A€286.07Out of stock -
Conaz Consigli Scarperia - Arbus knife - Arburese Corone Montone 20cm - 53017 - knife
Characteristic Sardinian knife, typical of the Arbus area; with blade with a characteristic bellied shape, very suitable for leather. Traditional shapes and fine finishes.
The shape reached today derives from ancient styles used in past times.
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox wood
Blade length: 85mm.
Blade thickness: 2mm.
Length closed: 115mm.
Total length: 205mm.
Weight: 50g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017M€77.87Only 0 leftOnly 0 leftOut of stock
