Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Wusthof Germany - 16cm Cleaver - 1129500916 - Kitchen Knives
It is the ultimate tool for all tasks that require high performance in terms of knife strength and power, making it easy to cut ribs, gratings, bones and even extremely hard-skinned fruits such as coconuts. The wide flat of the blade, together with its strength and rigidity, make preparation easier and effortless.
The Wusthof Gourmet meat cleaver is laser-cut from a single billet of steel and is the perfect tool for cutting chicken thighs and other bones.
- Forged and tempered from a single piece of steel at 1800°C / 58° Rockwell
- All-metal handle core
- Finger protection
- Extreme long-term sharpening thanks to PEtec technology - WÜSTHOF Precision Edge.Recommended use: Splitting bones.
Country of manufacture: Germany
Blade: chrome-molybdenum-vanadium steel.
Blade length: 16cm.
Total length: 29cm.
Packaging: Cardboard box with plastic lid.
Weight: 444g.
1129500916 -
Linder - Streich-Riemen - Leather Razor Strop - 888003
Essential for maintaining sharpness and revive the thread of razors free hand in this leather strop made in Germany allows you to instantly adjust the tension by screwing / unscrewing the comfortable wooden handle.
Brand: Linder / Streich-Riemen
Materials: wood handle, system voltage, metal, leather strop with one side coated with abrasive paste red
Strop Size: Length 183mm. - Width 40mm.
Overall length: 335mm.10174 -
Wusthof Germany - Magnet Bar Knife Holder Clear Wood 30 Cm - 2059625630 - Kitchen
The magnetic bar is made of high-quality clear wood, which adds a touch of style and warmth to the kitchen environment. The length of the magnetic bar is 30 cm, enough to hold a selection of different sized knives.
The magnetic bars have extra strong magnets that ensure secure anchoring of the steel knife. The magnetic bar requires little space. Knives are always neatly arranged and ready to use. We recommend that knives be placed with the tip of the blade up.
The magnetic bar is easy to install and can be attached to a wall or any other flat surface. We recommend mounting it in a place that is easily accessible and out of reach of children.
Recommended use: Magnet to keep knives in order.
Country of manufacture: Germany
Total length: 30cm.
Height: 6.5cm.
Thickness: 2cm
Packaging: plastic box
2059625630 -
Wusthof Germany - Magnet Bar Knife Holder Clear Wood 50 Cm - 2059625650 - Kitchen
The magnetic bar is made of high-quality light wood, which adds a touch of style and warmth to the kitchen environment. The length of the magnetic bar is 50 cm, which allows it to hold a wide selection of different sized knives.
The magnetic bars have extra strong magnets that ensure secure anchoring of the steel knife. The magnetic bar requires little space. Knives are always neatly arranged and ready to use. We recommend placing the knives with the tip of the blade up.
The magnetic bar is easy to install and can be attached to a wall or any other flat surface. We recommend mounting it in a place that is easily accessible and out of reach of children.
Recommended use: Magnet for keeping knives in order.
Country of manufacture: Germany
Total length: 50cm.
Height: 6.5cm.
Thickness: 2cm
Packaging: plastic box
2059625650 -
Dovo - Stainless Satin Finished Straight Nose Scissor, 4"
With the DOVO Stainless Satin Finished Straight Nose Scissor, 4", you can easily and painlessly remove annoying nose hair. We have rounded the tip of the scissors to give you a comfortable, painless experience when trimming in the sensitive nasal cavity. The DOVO blades have been precisely finished using hand-grinding to guarantee accurate cuts every time. Painful hair trimming is finally a thing of the past!
Material
This instrument is made of 1.4034 stainless steel. The metal alloy shows good corrosion resistance against soap or moisture and is therefore ideal for the production of high-quality scissors. In addition, the material has good cutting properties and can be ground precisely. The high-quality matte surface can be gripped safely even with wet hands.
Grind
DOVO scissors are finished and honed by hand. One of the challenges in the production of high-quality scissors is the precise dressing of the scissor blades. In order to guarantee maximum precision, our expert grinders hand grind every pair of scissors at the cutting edge and tip.
Product Details
Infections and injuries in the nasal cavity can not only be unpleasant but also dangerous. The nose has a sensitive nasal mucous membrane and thin veins, which can be quickly injured with a pointed tip. The ball-point tip is a particularly safe shape that protects you from such risks. The ball-shaped tip is blunt and generously rounded at the front, so that you can work without injury or worries. Usage you can easily and painlessly remove annoying nose hair
Brand Information
Founded in Solingen, Germany, in 1904, Dovo is recognized for its high-quality shaving products for well over a century, using precision engineering and expert craftsmanship.
44406 -
Wusthof - 4453 - Whetstone grain 1000/4000 - Synthetic Stone
Synthetic stone sharpener, water, bowl with non-slip abrasive stone for sharpening additional precision or for the maintenance and adjustment of the main stone
The stones sharpener WUSTHOF have a combination of quality of different grains. Are made using a special cooking process that lasts 14 days. In this way you get a robustness that lasts in time.
The innovative and practical tray firmly holds the stone and provides excellent stability and a high level of safety when sharpening.
The waste is collected in the pan sharpening, so the workplace remains clean.
Grit: 1000/4000
Stone Size: 22.5x8x3cm
Additional Stone Size: 8x3x3cm4453 -
DuStar - Model 1 Arad - Tactical Bowie - knife
The model Arad is the very first industrial knife designed, developed, manufactured, tested and perfected in Israel directly. Exploiting the CNC teconolgie and based on a timeless design such as the Randall Model 14, was designed by Alex Shamgar, Israel and produced by the renowned knifemaker ll'esperto Sherutay Erozia, since 1984 manufacturer of industrial castings lost wax molds.
Intended use: Tactical / Military
Type of production: Industrial
Production Blade: Israel
Blade: Stainless D2 56/57HRC
Treatment Blade: micropallinatura
Handle: FRN in (fiberglass reinforced nylon) with micarta spacers and brass guard
Blade length: 180mm.
Blade thickness: 5.5mm.
Length closed: -
Overall length: 298mm.
Thick when closed: -
Balancing: advanced to 1cm. the branch of guard
Weight: 502G.
Closure: -
Clip: -
Sheath: Nylon, ABS with rigid insert
Packaging: Cardboard box with logos Dustar
Notes: Design by Alex Shamgar10843€311.48Out of stock