Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
ExtremaRatio - Shrapnel knife - Geo Camo - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Provenance: withdrawn from a private collection, previously purchased - SERIAL CK0269D
* Condition: quite good, the knife was used for medium/light cuts
* Commercially available: Out of production
* Sharpening: Factory sharpened
* Marks on blade: various due to use (see related photos), mostly rubbing/slight polishing
* Marks on handle: slight
* Box: Present, one side was damaged and was fixed with tape
* Scabbard: original
* Manuals, Certificates and Warranties: - -
* Checked and certified by our in-house laboratoryIntended Use: Tactical/Sporting
Production type: Industrial
Country of Production: Italy
Blade: N690Co stainless steel
Finish: Geo Camo (burnishing with laser treatment)
Handle: Forprene
Blade length: 110mm.
Blade thickness: 6.3mm.
Total length: 210mm.
Balance: recessed
Weight: 212g.
Sheath: ABS sheath with Tek-Lok attachment with automatic knife retention system.
Packaging: Cardboard box with Extrema Ratio logosER-SHR-GEO-CP -
Giant Mouse - ACE Sonoma V2 - Elmax & Green Canvas Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased and used.
* Condition: Very good condition, with a few small marks on blade and handle.
* Commercially available: Discontinued
* Sharpening: Professionally re-sharpened.
* Marks on blade: Small, unnoticeable scratches on the tip of the blade.
* Marks on handle: A small mark near the clip housing.
* Packaging: Yes
* Scabbard: /
* Manuals, Certificates and Warranties: /
* Checked and Certified by our in-house laboratory
Production Type: Industrial
Country of Production: China (by Reate Knives)
Blade: Elmax stainless steel
Blade finish: satin finish
Handle: green cavnas micarta with brass spacer
Blade length: 87mm.
Blade thickness: 3.5mm.
Length closed: 114mm
Total length: 203mm.
Thickness when closed: 14mm.
Weight: 85g.
Closure: Liner Lock
Clip: flush, stainless steel, removable and reversible
Packaging: cardboard box with Giant Mouse logos
Notes: discontinued knife, winner of the "2023 BEST EDC CHAMPION" award by CarryologyGM-ACESO-CP -
Deroma - Pattada Resolza knife handcrafted ram's horn knife - PRIVATE COLLECTION
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Available: on the market
* Sharpness: Factory
* Marks on blade: none
* Marks on handle: None
* Box: -
* Sheath: synthetic material case
* Manuals, Certificates and Guarantees: guarantee certificate
* Checked and Certified by our internal laboratoryIntended use: Regional
Type of production: Artisan
Blade production: Italy
Blade: 12c26 stainless steel
Blade Treatment: -
Handle: ram's horn
Blade length: 110mm.
Blade thickness: 3mm.
Closed length: 147mm.
Total length: 265mm.
Closed thickness: 19mm
Balancing: -
Weight: 100g.
Closure: without blade lock
Clips: -
Sheath: -
Packaging: rigid packaging with artisanal production certificate signed by Antonio Deroma
Note: -AP-DR-RES-12 -
BlackJack - Wasp Vintage Knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Knife from the 1990s, previously purchased.
* Condition: In very good condition
* Commercially available: discontinued
* Sharpening: Factory sharpened
* Marks on blade: Small marks given by time.
* Marks on handle: None
* Box: -
* Scabbard: Present, but presumably not original although fully compatible.
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Tactical / SportingProduction Type: Industrial
Country of Production: Japan
Blade: Stainless steel AUS-8A
Blade Finish: Satin finish
Handle: Kraton
Blade length: 140mm.
Blade thickness: 6mm.
Total length: 263mm.
Balance: advanced
Weight: 225g.
Scabbard: brown leather, belt-mounted, presumably not original but fully compatible
Packaging: -
Notes: previously purchased knife, from private collectionBJ-WA-CP -
William Henry - Signature Collection B12-FTD - Damascus ZDP-189 and Titanium - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: some minor scuffs and hairlines on the right side
* Box: Present
* Scabbard: Present
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Production type: MidTech
Country of manufacture: USA
Blade: stainless rolled damascus with wave design, 45-ply and ZDP-189 cutting edge
Blade finish: -
Handle: titanium with blue anodized and topaz set
Blade length: 79mm.
Blade thickness: 2.3mm.
Length closed: 100mm.
Total length: 180mm.
Weight: 57g.
Closure: Button Lock with embedded topaz
Sheath: leather, with stainless steel clip
Packaging: cardboard box with William Henry logos and warranty certificate
Notes: previously purchased knife, from a private collectionWH-BF12-CP -
Randall Knives - Astro Model 17 - PRIVATE COLLECTION - custom knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very good condition
* Sharpening: Original
* Marks on blade: None
* Marks on handle: None
* Packaging: -
* Scabbard: original, leather, in excellent condition.
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.Designed specifically for the seven Mercury Program astronauts, the Model 17 accompanied these pioneers on the United States' first manned space flights. Astronaut Gordon Cooper contributed to the final design of this knife, making it not only a survival tool, but also a piece of history. Two examples of this knife, rich in historical value, are currently on display at the Smithsonian Institution.
Intended use: utility/militaryType of production: handcrafted
Country of manufacture: USA
Blade: 440B stainless steel
Blade finish: satin-finished
Handle: micarta, brass and duralumin
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 256mm.
Balance: on the guard branch
Weight: 252g.
Sheath: Black Leather
Notes: previously purchased knife, withdrawn from private collectionAP-RK-17ASCP -
Livio Montagna - 2014 Hunting Knife - RWL34 & Sambar Amber - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel RWL34 hardened to 59/60 HRC
Blade finish: satin finish
Handle: amber Sambar stag with 416 stainless steel guard and pommel
Blade length: 107mm.
Blade thickness: 3.5mm.
Total length: 220mm.
Weight: 181g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPSA -
Livio Montagna - 2017 Fighter - N690Co & Snake Wood - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Very Good
* Commercially available No.
* Sharpening: original
* Marks on blade: none
* Marks on handle: a few small hairlines on heads.
* Packaging: none
* Scabbard: Leather, handcrafted, original with a few marks due to age.
* Manuals, Certificates and Warranties: certificate of authenticity signed and dated by the craftsman.
* Checked and Certified by our in-house laboratoryIntended use: hunting / collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel N690Co hardened to 59/60 HRC
Blade finish: satin finish
Handle: Snakewood - 416 stainless steel guard and pommel
Blade length: 127mm.
Blade thickness: 4mm.
Total length: 240mm.
Weight: 185g.
Sheath: handcrafted, leather, hand-stitched
Packaging: -
Notes: previously purchased knife, from a private collection, handcrafted by Master C.IC. (Italian Knifemakers Guild) Livio Montagna.AP-MONT-CPFD -
Tommy Lee - Clip Point - Damascus & Giraffe Bone - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1990 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade; artisan passed away in 2013
* Sharpening: Factory sharpening, can be improved.
* Marks on blade: A few small oxidation marks on handle.
* Marks on handle: A few small marks on steel bolsters due to time.
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks from time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: Collection/GentlemanType of production: Handcrafted
Country of Production: USA
Blade: full tang, handcrafted carbon damascus steel
Handle: stainless steel heads and giraffe bone handles
Blade length: 104mm
Blade thickness: 3mm.
Total length: 196mm.
Weight: 94g.
Sheath: Leather, for belt or boot, with steel clip for attachment
Packaging: -
Notes: rare handcrafted knife made in 1990 by well-known American knife maker Tommy LeeFC-TLEE-DG-CP -
Peter Herbst - Engraved Integral - CPM-T440V & Fossil Ivory - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: 03/1990 model, in like-new condition
* Commercially available: Unique knife, entirely custom made and hand-engraved
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house workshopIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: stainless steel CPM-T440V at 60HRC
Blade finish: mirror polish
Handle: integral from solid, fully hand-engraved, with fossil ivory grips and red micarta spacers
Blade length: 93mm
Blade thickness: 4mm.
Total length: 203mm.
Weight: 99g.
Sheath: Leather
Packaging: -
Notes: rare handcrafted knife made in March 1990 by well-known German knifemaker Peter Herbs, a member of the German Knifemakers' Guild and a member of the very prestigious American Knifemakers' Guild.FC-PHERBST-CP -
Frank Centofante - SL-10 - ATS34 & Micarta #049 - PRIVATE COLLECTION - handmade knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 12/1990 model, overall in good condition, with a few small marks from time
* Commercially available: Limited edition, numbered model, made entirely by hand; craftsman passed away in 2009
* Sharpening: Re-sharpened, a few small marks on blade due to sharpening
* Marks on blade: A few small marks
* Marks on handle: A few hairlines on the bolsters and a small dent on the left micarta handle.
* Box: -
* Scabbard: Suede leather case.
* Manuals, Certificates and Warranties: Certificate of authenticity with date of manufacture and craftsman's signature.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: USA
Blade: stainless steel ATS34
Blade finish: satin finish
Handle: Stainless steel and Micarta
Blade length: 83mm
Blade thickness: 2.5mm.
Length closed: 108mm.
Total length: 189mm.
Thickness when closed: 8mm.
Weight: 99g.
Closure: Back Lock
Clip: -
Sheath: Suede leather pouch
Packaging: -
Notes: rare handcrafted knife made in December 1990 by noted U.S. knife maker Frank Centofante who passed away in 2009, serial number #049FC-SL10-CP -
ExtremaRatio - MF1 BC knife - PRIVATE COLLECTION - tactical knife
Type: Previously Purchased
Condition: in excellent condition
Available in the market, currently in production
Sharpening: Factory standard
Blade marks: None
Handle marks: None
Box: Present
Sheath: Not applicable
Manuals, Certificates, and Warranties: ER
Checked and Certified by our internal laboratory
Intended use: Tactical/EmergencyType of production: Industrial
Blade Production: Italy
Blade: N690Co stainless steel, 58HRC
Blade Treatment: Testudo
Handle: Anticorodal
Blade length: 95mm
Blade thickness: 4mm
Closed length: 134mm
Total length: 225mm
Closed thickness: 24mm
Balance: Not applicable
Weight: 162g
Closure: Liner Lock
Clip: Stainless Steel
Sheath: Not applicable
Packaging: black cardboard box with Extrema Ratio logos
Notes: seat belt cutter, glass breaker, screwdriver for opticsAP-MF1-BC-CP -
Lionsteel - T.R.E. Three Rapid Exchange - Carbon Fiber - PRIVATE COLLECTION - M390 - Knife
Type: Previously purchased and used
Condition: In excellent condition
Availability: Available for purchase
Sharpening: Resharpened
Blade marks: NO
Handle marks: small marks on the clip
Box: Original and present, made of cardboard
Sheath: Not included
Manuals, Certificates, and Warranties: Included
Inspected and Certified by our internal laboratory
Usage: Sports/CollectionType of production: Industrial
Country of production: Italy
Blade: Bohler M390 steel 60/61HRC
Blade finish: Bead blasted and matt
Handle: Carbon Fiber and Titanium
Blade length: 74mm
Blade thickness: 3.5mm
Total length: 175mm
Weight: 62g
Lock: Titanium Frame Lock with steel stopper
Clip: 6Al4V Titanium
Packaging: Cardboard box with LionSteel logos
Notes: IKBS ball-bearing opening with Carson flipper systemAP-TRE-FC -
Spyderco - Paramilitary Knife - G10 Black - Serrated - C81GS - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Conditions: In excellent conditions
Available in the market: Out of production since 2010
Sharpening: Factory
Marks on blade: NO
Marks on handle: NO
Box: Present
Sheath: -
Manuals, Certificates, and Warranties: No
Checked and Certified by our internal laboratory
Intended use: Sport / CollectionType of production: Industrial
Blade Production: USA
Blade: In CPM-S30V stainless steel
Blade finish: Satin
Handle: G10
Blade Length: 87mm.
Blade Thickness: 3.5mm.
Closed Length: 122mm.
Total Length: 210mm.
Weight: 110g.
Closure: Compression Lock
Clip: Painted stainless steel
Packaging: Cardboard box with Spyderco logos
Notes:AP-C81GS -
Zero Tolerance - Ken Onion Flipper Knife - ZT0200ST - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Condition: in excellent condition
Available in commerce: NO
Sharpening: Original
Marks on blade: YES - small marks
Marks on handle: NO
Packaging: YES, original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryType of production: Industrial
Country of production: USA
Blade: In stainless steel 154CM
Blade finish: Tungsten DLC Coating
Handle: G10 with stainless steel liners
Blade length: 101mm.
Blade thickness: 4mm.
Closed length: 132mm.
Total length: 222mm.
Thickness when closed: 21mm.
Weight: 225g.
Closure: Liner Lock
Clip: Removable, reversible and multi-position, in stainless steel
Packaging: -
Notes: Design by Ken Onion - Opening system through Carson Flipper system - Knife out of production, withdrawn from private collection, like new, without boxAP-ZT0200ST -
Conaz Consigli Scarperia - Zuava knife 16 cm raw ox horn 50307 - knife
Intended use: sporting/collection
Type of production: artisan
Blade production: Italy
Blade: Stainless steel X50CrMoV15
Blade treatment: -
Handle: Raw ox horn
Blade length: 70mm.
Blade thickness: 1,6mm.
Length closed: 90mm.
Total length: 160mm.
Weight: 53g.
Closure: without blade lock
Packaging: cardboard box
Sheath: -Craftsmanship is beautiful because it is varied
The colours of the materials from which the handicrafts are made may vary from those shown in the pictures.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: that's the beauty of fine materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: that's the beauty of fine workmanship. Combine all this and you have a product that is always different and unique. And always different from that unique and unrepeatable product that, necessarily, we have to photograph if we want you to understand what we are talking about and what we are offering you.
50307 -
Master of Defense - Hornet Black Serrated - James Keating Design - PRIVATE COLLECTION - folding knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: Slight: a few small scratches and abrasions on corners and clip; small oxidation marks on hardware
* Box: Present and original (full set).
* Scabbard: -
* Manuals, Certificates and Warranties: Present (full set)
* Checked and Certified by our in-house laboratory
Tactical knife/EDC produced in the late 1990s and designed by martial arts expert James Keating,
Master of Defense, an eclectic American brand now discontinued and later taken over by Blackhawk! Blades, produced several lockable and fixed knives of tactical and military types, all made in collaboration with well-known Knifemakers such as Elishewitz, Janich, Keating, Ayoob, Watson and Casillas.
Intended Use: Tactical/Collection
Production Type: Industrial
Country of manufacture: USA
Blade: stainless steel 154CM
Handle: aircraft grade aluminum with non-slip Kraton inserts
Blade length: 75mm.
Blade thickness: 3.5mm.
Length closed: 107mm.
Total length: 183mm.
Thickness when closed: 13mm
Weight: 90g.
Closure: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with Master of Defense logosMOD-HORNET-CP -
Franco Bonassi - Titanium Front Flipper Custom M390 - PRIVATE COLLECTION - handcrafted knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available On order
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Packaging: Zip pouch, original
* Scabbard: Leather, pocket size, original
* Manuals, Certificates and Warranties: Certificate of guarantee and authenticity present.
* Checked and Certified by our in-house laboratory
Intended use: sports/collection
Type of production: handcrafted
Country of production: Italy
Blade: stainless steel M390 60/61HRC
Blade finish: satin finish
Handle: titanium
Blade length: 176mm.
Blade thickness: 2.5mm.
Length closed: 99mm.
Total length: 175mm.
Weight: 64g.
Closure: Frame Lock
Clip: removable, titanium
Scabbard: Leather pouch
Packaging: Zip pouch and certificate of authenticity and warranty
Notes: Designed and made entirely by hand in Italy by Franco "Frank" Bonassi, Decemnre 2019 example with serial number T27 - Previously purchased, from private collectionAP-FRANK-TI -
MC Thiers - AX1 Vintage Knife - Green Stamina Wood - PRIVATE COLLECTION - knife
Knife from private collection - Vintage model (presumably early 90's) from Maison Coutellerie Thiers - In very good condition, never used for cutting, still shows some small signs of wear due to past time - Supplied with original leather sheath, with some small signs of wear - Checked and certified by our in-house laboratory.
Intended Use: Collection/SportsmanType of manufacture: Industrial
Country of Production: France
Blade: Stainless steel Z70CD15 (440A)
Blade finish: satin-finished
Handle: stainless steel and dark green stamina wood
Blade length: 70mm.
Blade thickness: 2.5mm.
Total length: 175mm.
Weight: 95g.
Closure: Back Lock
Clip: not present
Sheath: leather, with belt loop
Notes: knife from private collection in excellent conditionMCT-AX1-GSW -
Laguiole En Aubrac - raw buffalo horn - knife
Destination: French regional collector's knife
Blade: Swedish stainless steel 12C27 to 54HRC brut de forge.
Handle: raw buffalo
Blade length: 90 mm.
Blade thickness: 2.5 mm.
Total length: 220 mm.
Weight: 72 g.
Folders: Stainless Steel
Heads: Absent
Closure: Retention spring in brushed stainless steel
Clip: Absent
Sheath: AbsentL0512CBI/FSI1 -
Laguiole En Aubrac - Le Randonneur knife - Boxwood collection knife
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Boxwood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RBI-LSB1 -
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Laguiole en Aubrac - Sommelier sabre Lisse Origine Concorde - Sabrage
Sabrage is a special technique for opening champagne bottles with a sabre (sabre in French), usually used as a ceremonial gesture. The sabre is slid along the body of the bottle towards the neck with a sharp blow. The force of the blade striking the lip of the neck is sufficient to break the glass and separate the neck cleanly from the bottle collar which, together with the cork, is shot away by the force of the gas contained in the wine. When applied correctly, the technique is effective with any sparkling wine.
This practice became popular in Napoleonic France when the army visited the aristocratic domains belonging to the empire. The period was just after the French Revolution and the sabre was the weapon of choice for the army's light cavalry, the hussars. Given the numerous victories achieved by the army, there were many celebrations, during which it was customary to open the bottles by a convenient and easily available means. It seems that during one of these celebrations Napoleon himself said 'Champagne! In victory it is a merit; in defeat a necessity', thus encouraging its use and practice.
Champagne sabre entirely handmade in the town of Laguiole.
Authentic champagne sabre of premium Laguiole en Aubrac quality.
Unique piece of Sanvik 12C27 stainless steel, a martensitic stainless steel.
The composition of carbon and chromium offers a unique combination of properties including: very high hardness, very high wear and corrosion resistance.
White resin handle.
Each piece is a unique work of art, handmade by a craftsman.
Delivered in a gift box, manufactured in Aubrac, France
Blade: Stainless steel 12C27 mirror polished - unsharpened
Handle: WHITE RESIN
Blade length: 265mm
Total length: 405mm
Weight: 298g
Packaging: Wooden box with Laguiole en Aubrac logos.
C1S99OC -
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
Laguiole en Aubrac - Set with acacia cutting board with cheese cutting thread and classical cheese knife
LAGUIOLE EN AUBRAC is one of the five blacksmiths that still forge knives around the village of Laguiole in southern France according to a centuries-old tradition and turn them into real gems of craftsmanship. Each piece is unique and from wood to mammoth ivory there is hardly any limit to the exclusivity of the materials. Laguiole en Aubrac - acacia board with cheese cutting wire and cheese knife A set of the extra class for every cheese connoisseur and lover of a well-tended cheese platter.
The simple rectangular acacia wood board has a groove and a cutting wire with a stainless steel bracket.
The set also includes the cheese knife with a classic shape, ornament and bee. High-gloss polished stainless steel jaws. This cheese knife is also available in buffalo horn and different types of wood. Suitable for all Laguiole en Aubrac cutlery. The set is delivered in a elegant paper box.
Manufacturer: Laguiole en Aubrac
Handcrafted French Classical cheese knife - 24.5 cm
Blade 12,5 cm
12C27 stainless steel Corn handle.
SETFRGM -
Laguiole En Aubrac - Sauveterre knife in buffalo horn - handmade knife
French regional knife handcrafted in the city of Sauveterre
Blade: Swedish 12C27 to 54HRC stainless steel.
Handle: horn
Blade length: 90 mm.
Blade thickness: 3 mm.
Total length: 200 mm.
Weight: 90 g.
Folders: Stainless Steel
Heads: Stainless steel
Closure: Stainless steel retention spring
Clip: Absent
Sheath: AbsentSA509BUI -
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Laguiole En Aubrac - Oyster Opener Knife with mussel shell handle - Gift box
Ref.C2I99CQMIH - Oyster knife with mussel shell handle Presitigioso Open Oysters Laguiole En Aublrac.
Handcrafted realization
Blade: 12C27
Stainless Steel Handle: in shell of mussels.
Blade length: 60 mm.
Blade thickness: 3 mm. T
otal length: 180 mm.
Packaged in an elegant wooden box.
8169C -
Buck - Buckmaster 184 Survival Knife -1984 - COLLEZIONE PRIVATA - vintage coltello
The legendary BuckMaster 184 Survival Knife is currently conceived and designed specifically for the Navy SEAL Team in 1980. He was created by CJ Buck (CEO of Buck Knives) and designed a small business, Qual-A-Tec, in 1981 in California. The BuckMaster is the American icon of the coltellis that emerged in the '80s and has contributed to the creation of the famous M9 bayonetta of the American army. The production was 2600 examples all'anno.
The brand new model, coming from the private collection, comes from the first production, dating back to 1984. Globally in perfect condition, only damaged and used. Only deprived of scatola.
Destination of use: Sportivo / Collezione
Production type: Industrial
Lama Production: USA
Slat: coltello entirely made in stainless steel 420HC
Lama Treatment:-
Manicure: acciaio
Blade length: 185mm.
Blade thickness: 7.5mm.
Chinese lunge: -
Total length: 315mm.
Weight of chiuso: -
Bilanciatura: arrest of the guard branch
Weight: 675g.
Chiusura:-
Clip:-
Foyer: in black ABS
Confezione:-
Note: The characteristics, brief, are data of the presence of due arpioni/ganci smontabili a vite. The function of the quest is simple ancoraggio. This coltello may be infatti used as the lancio's gancio fissando una corda all'anello present sul pomello. The product guarantees a tenuta of fine arpioni at 600 libbre. I Seals della Marina, nello specifico, avevano richiesto un coltello che potesse essere usato sott'acqua per poter ancorare i mezzi ad un punto de fissaggio subacqueo, ed ecco il reason della totale costruzione en acciaio.BUCK-184 -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-B -
Laguiole En Aubrac - Olive Wood Stainless Steel Wine and Cheese Set in box 3 Pieces
Laquiole En Aubrac Waiters Corkscrew Wine Opener Forged stainless steel blades Olive wood handles, finished by hand Unique Laguiole is pronounced "Laiole" is a village in France renewed for its artisanal hand finished cutlery. Inspired by this region of the world , this set has preserved the craftsmanship in its manufacturing process. The metal is forged then finished and assembled by hand. The Ulive Wood access add the finishing touch to this big-quality laguiole product. Laguiole Set of Wine and Cheese Set Stainless steel blades Smooth easy grip wood handles Unique wood veneer Stone Finished steel blade and Ulive wood hadles Built to last with with quality materials. Olive wood is exceptional quality Veneer handle is implanted with phenolic thermosetting resins which creates a durable dimension stable handle Moisture resistant finishes last a lifetime The color in the Olive wood and grain structure creates unique to each piece Wooden presentation box 2 knives lenght 24cm cheese/ 18cm butter1253SET -
EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORG -
Laguiole en Aubrac - Set of 3 grey glitter resin Cheese Knives
Laguiole GREY GLITTER RESIN Cheese Knives - Laguiole En Aubrac, Set of 3 These heirloom-quality knives, designed to last a lifetime and crafted by French artisans with the highest-quality materials, make a truly special gift for wedding or corporate events, finely crafted knives. An exquisite gift or elegant complement to your wine & cheese fete. Each set includes 3 knives packaged in a wooden storage box. The blades are forged from ultrastrong Sandvik steel. The handles are handcrafted from ;grey glitter resin Made in France's Laguiole region. Includes a certificate of authenticity and a lifetime warranty. Set includes 3 pieces: plane, knife and soft cheese spreader. Size (inches): 1 1/2w x 9h (plane), 1w x 9 1/4h (knife), 1w x 7 1/4h (soft spreader) Genuine Laguiole en Aubrac grey glitter resin cheese knives are hand-made in France by master craftsmen and guaranteed for life.5551CORIAN -
Conaz Consigli Scarperia - Zuava ox horn 50075 - 16cm - knife
This model represents an evolution of the traditional zuava in steel, with brass finishes, hard pressed on the plates rather than welded and pin finished on a par with rather than visible as was the case in the old construction.
Regional artisan knife produced in Scarperia, in use throughout Tuscany until the early nineteenth century.
Very robust and suitable for all jobs
Handle: ox horn
Blade: 440A Steel
Total length: 16 cm
Blade length: 7.5 cm50075 -
Consigli Scarperia - Maremmano Amaranth wood - Kilama Serie MFMA18 - knife
The series Kilama by Consigli is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
Total length: 185
Blade length: 80
Blade thickness: 2.5
Weight. 55g
Steel: 420
Hanfle: amaranth wood
Sheath: -
Package: box with cleaning kit50154 -
Conaz Consigli Scarperia - Fiorentino Bovino knife cm 24 - 50018 - knife
Scimitar "or" French "blade already present in the early twentieth century, production continued until the mid-1950s. The great success of this model, which was born in Scarperia has had national diffusion, is due to the fact that although it is very light it is elegant, robust and has great cutting capacity, due to the guessed shape of the blade. It is characterized by the presence of a metal "button" on the heel and a clamp at the other end of the handle.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 148g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.R-FIC24 -
Consigli Scarperia - Calabrese in bovine R-CAC20 - knife
A native of Calabria, this knife by the blade and pointed straight but has a handle in the most typical style of Scarborough, has a seal consists of two rings round, similar to Fiorentino, although smaller. It is supposed to have been in the past a major reworking of the knives typical Calabrian by the craftsmen of Scarperia that as often happened then have been extensively used to their own tradition. Model in horn tip.
Stainless steel blade 440.
Blade length 8 cm.
Blade thickness 3 mm.
Overall length 20 cm.
Weight 62 gr.
Handle in horn tip50004 -
Conaz Consigli Scarperia - Pattada knife Brotzu raw mutton 17cm - 53161 - knife
Typical Sardinian handmade folding knife produced by the Conaz company from Scarperia
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ram horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 95mm.
Total length: 170mm.
Weight: 34g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53161 -
Conaz Consigli Scarperia - Pattada Brotzu raw mutton 22cm PBM22G - knife
Pattada Brotzu raw mutton 22cm PBM22G - knife
Typical folding knife craftsmanship Sardinian manufactured by Conaz ScarperiaBlade: stainless steel 420
Handle: raw mutton
Blade length: 90mm.
Overall length: 215mm.
Weight: 64g.WARNING: these are natural material, the color of the horn may be different from the one in the picture.
PBM22G -
Conaz Consigli Scarperia - Buffalo horn screed - Kilama 50159 series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 105mm.
Total length: 185mm.
Weight: 63g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric case50159 -
Consigli Scarperia - Maremma in Olivo - Series Kilama MFO18 - knife
Maremma in Olivo - Series Kilama MFO18 - knife
The series Kilama Councils is a modern interpretation of Italian regional knives.
The materials and finishes remain the same as always but the line has the form "new"
that reflect the traditional and regional Italian classics knives.
Total length: 185
Blade length: 80
blade thickness: 2.5
weight. 55g
Steel: 420
manicatura: amaranth wood
Sheath: fabric
Package: Box Advice with cleaning kit knife50157 -
Conaz Consigli Scarperia - Hunchback knife in Olive - Kilama 50153 Series - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisanLama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: olive wood
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: 95mm.
Total length: 185mm.
Weight: 50g.
Closing: retention spring
Packaging: Tips box with knife cleaning kit
Sheath: fabric caseGAO18 -
Conaz Consigli Scarperia - Senese knife in amaranth - Kilama series SEAM18 - knife
The Kilama series of Consigli is a modern interpretation of Italian regional knives. The materials and finishes remain the same as always, but the line has "new" shapes that reflect the classic traditional and regional Italian knives.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: amaranth wood
Blade length: 80mm.
Blade thickness: 3mm.
Length closed: 90mm.
Total length: 185mm.
Weight: 55g.
Closing: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
SEAM18 -
Conaz Consigli Scarperia - Zuava knife 19 cm raw ox horn 50309 - knife
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Raw ox horn
Blade length: 75mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 190mm.
Weight: 79g.
Closing: without blade lock
Packaging: cardboard box
Sheath: -
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50309 -
Conaz Consigli Scarperia - Mugello 16 cm horn cattle raw E-CMC16G - knife
Mugello 16 cm horn cattle raw E-CMC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 75mm.
Overall length: 165mm.
Weight: 39g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50306 -
Conaz Consigli Scarperia - Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Ghiandina 16 cm horn cattle raw E-GHC16G - knife
Blade: 420 stainless steel
Handle: raw beef
Blade length: 70mm.
Overall length: 160mm.
Weight: 36g.
Closed Length: 90mm.
CAUTION: Since this is a natural material, the color of the horn may be different from the one in the picture.50308 -
Laguiole En Aubrac - Capucin carbon and bronze - 8cm - collection knife
Intended use: Sports / collection
Type of production: Industrial
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: satin
Handle: carbon fiber and copper
Blade length: 77mm.
Blade thickness: 2.5mm.
Closed length: 100mm.
Total length: 177mm.
Thick when closed: 20mm.
Balancing: -
Weight: 47g.
Closing: -
Clip: -
Sheath: -
Packaging: -
Note: -L0510CCBI -
Boker Plus - Jim Wagner Reality-Based Blade - PRIVATE COLLECTION - 01BO053
Knife withdrawn from a private collection - Knife no longer in production since 2014 - in excellent condition, without box - Never resharpened - Checked and certified by our internal Coltelleria Collini laboratory.
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO053 -
Conaz Consigli Scarperia - Anconetano ox horn 20 cm - 50001 - knife
Traditional knife produced by master cutlers in Scarperia, a place where, since 1300, the artisan manufacture of Italian knives has continued.
Fisherman's knife, typical of the Adriatic sea belt. With external spring, handle in full polished bovine horn, on the end of the back it has a deep step at right angle useful for branching nets.
Intended use: CollectionType of production: artisanal
Blade: X50CrMoV15 stainless steel
Production Lama: Italy
Handle: Ox horn
Blade length: 85mm.
Blade thickness: 2.5mm.
Total length: 200mm.
Weight: 58g.
Closing:
Notes: handcrafted in the city of Scarperia (FI)The colors of the materials with which our handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you. A slight surprise is therefore always accompanied by every online purchase of our handcrafted products: but this is also the beauty of craftsmanship.
50001 -
Conaz Consigli Scarperia - Arbus knife - Arburese Bovine Blonde Horn 20cm - 53021 - knife
Characteristic Sardinian knife, typical of the Arbus area, blade with a characteristic bellied shape, very suitable for leather.
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 85mm.
Blade thickness: 2.5mm.
Length closed: 15mm.
Total length: 205mm.
Weight: 73g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53017B -
Conaz Consigli Scarperia - Bergamasco knife dark ox horn - 50002 - knife
Knife without spring with a very characteristic line, representative of the peasant and pastoral civilization of the Bergamo valleys where it was made with a wooden handle. Practical and light, in its simplicity it is one of the most beautiful knives of the Italian tradition and has long been appreciated well outside its original area. It is proposed by Consiglio in a refined version, a horn tip model with a polished brass band.
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: bovine horn
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 110mm.
Total length: 200mm.
Weight: 70g.
Closing: without spring
Packaging: elegant box with Recommendations logos
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
50002 -
Conaz Consigli Scarperia - Mozzetta light ox horn 50034 - knife
This knife owes its name to the blunt tip which is absolutely missing as if the blade had been cut off.
Pointless knives became much more widespread with the "Giolitti law" of 1908 which fixed the length of the blade of pointed knives at only four centimeters.
For mozzette, the limit rose to ten centimeters, offering the possibility of safely carrying a knife of sufficient size in your pocket without risking the rigors of the law.Intended use: sports / collection
Type of production: artisanal
Production Lama: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn
Blade length: 80mm.
Blade thickness: 3mm.
Closed length: 105mm.
Total length: 185mm.
Weight: 63g.
Closure: without blade lock
Packaging: elegant box with Recommendations logos
Sheath: fabric caseThe craftsmanship is beautiful because it is varied
The colors of the materials with which the handicrafts are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: this is the beauty of quality materials. Add the craftsmanship, where the hand of the craftsman never performs the same gesture: it is the beauty of craftsmanship. Combine all this and you will have a product that is always different and unique. It is always different from that unique and unrepeatable product that we must necessarily photograph if we want to make you understand what we are talking about and what we are offering you.50034 -
Conaz Consigli Scarperia - Pattada Brotzu knife bovine horn 22cm - 53142 - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by the Scarperia Consigli company.
The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition.
Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Intended use: sports / collection
Type of production: artisan
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: Ox horn and nickel silver with handcrafted engravings
Blade length: 90mm.
Blade thickness: 2.5mm.
Length closed: 120mm.
Total length: 215mm.
Weight: 62g.
Closing: without blade lock
Packaging: cardboard box
Sheath: fabric case
Craftsmanship is beautiful because it is variedThe colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you.
53142 -
Conaz Consigli Scarperia - Pattada Brotzu knife ox horn - 53143 - 24cm - knife
This Pattada constitutes the now historical interpretation of the Sardinian knife made by Consiglio. The handle formed by two halves fixed with a row of rivets and the absence of a real spring are typical of the original model, but the line, the shape of the surfaces, the use of bovine horn are influenced by the Scarperian tradition. Consigli has long linked its business to supplies for Sardinia, so much so that their Pattada have now become "Sardinian by adoption".
Lama production: Italy
Blade: X50CrMoV15 stainless steel
Blade treatment: -
Handle: ox horn
Blade length: 70mm.
Blade thickness: 3mm.
Length closed: 135mm.
Total length: 243mm.
Weight: 76g.
Closing: without lock
Packaging: cardboard box
Sheath: fabric caseCraftsmanship is beautiful because it is varied
The colors of the materials with which the handmade products are made may vary from those shown in the images.
Horn, wood and cornotech are raw materials that by their nature have a marked variability from one supply to another: it is the beauty of quality materials. Add craftsmanship, where the craftsman's hand never makes the same gesture: it's the beauty of craftsmanship. Combine all this and you will always have a different and unique product. It is always different from the one and unrepeatable product that we must necessarily photograph if we want you to understand what we are talking about and what we are offering you
53143 -
Consigli Scarperia - Romano con anello 30cm - ox horn - 50060 - knife
The "Roman" testifies to the widespread mentality in the Papal States for which the knife was considered as a faithful friend to be constantly worn "in his pocket" and to be unleashed at the first hint of a fight or for an immediate response.
Many elements constituting the "Roman" bear witness to the offensive use that distinguished this knife: the sharp blade, the decorations of the lattice handle or fish bone that served to improve the grip, the locking system with fixed spring that prevented the knife could close up accidentally and that at the time of the opening emitted a dry noise that exalted the aggressive expression.
Destination of use: collection
Type of production: artisan
Blade: 420 stainless steel
Country of production: Italy
Grip: engraved ox horn
Blade length: 130mm.
Blade thickness: 2.5mm.
Length closed: 160mm.
Total length: 290mm.
Weight: 106g.
Closure: rear ring lock
Notes: made entirely by hand in the city of Scarperia (FI)Weight: 140g.
50060 -
Consigli Scarperia - Three Pianelle R-TPC20 - knife
Three Pianelle R-TPC20 - knife
Craft knife regional product in Scarborough in use in southern Italy
The handle in a single block of polished cow horn, carries on pin the characteristic round escutcheon in brass.Blade: Stainless ino 440
Blade length: 8.5 cm
Overall length 20 cm
Weight: 38 gr.
Handle: horn cattle50071 -
Laguiole en Aubrac - 3-piece cheese set - guim blanc
Laguiole en Aubrac 3-piece cheese set - guim blanc
The knives by Laguiole en Aubrac combine the long tradition of knife makers in perfect symbiosis with a penchant for perfection, while the price, though, can be measured in worldly standards.
As is for all genuine French Laguiole knives, the traditional shepherds cross in the RESIN GUIM handle, the hand-made engravings on the spine and the bee are a must, including for this cheese set.
It is carefully manufactured by hand and reflects the French tradition and dining culture. Please hand wash (only).
5551 -
Laguiole En Aubrac - Alsacien Ebony - ALS99EBC / NSB1 - knife collection
Destination: French collector's regional knife
Blade: 12C27 Swedish polished stainless steel to 54HRC.
Handle: ebony wood
Blade length: 70 mm.
Blade thickness: 2.5 mm.
Total length: 180 mm.
Weight: 70 g.
Folders: Stainless Steel
Heads: Stainless Steel
Closure: Retention spring
Clip: Absent
Sheath: Absent2481 -
Laguiole En Aubrac - Le Randonneur knife - Ginepro coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Ginepro
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512REI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Oak knife collection
Intended use: Sports
Type of production: artisanal
Production Lama: France
Blade: 12C27 stainless steel
Blade treatment: -
Handle: Oak wood
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: 119mm.
Total length: 219mm.
Thick when closed: 16mm.
Balancing: -
Weight: 70g.
Closure: Simple spring
Clip: -
Sheath: -
Packaging: cardboard tubular box with Laguiole en Aubrac logos
Note:L0512RHI-FSB1 -
Laguiole En Aubrac - Le Randonneur knife - Olivo coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: artigianale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Olivo
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RLI-LSB1 -
Laguiole En Aubrac - Le Randonneur knife - Wengè coltello collezione
Destinazione d'uso: Sportivo
Tipo di produzione: Industriale
Produzione Lama: Francia
Lama: In acciaio inox 12C27
Trattamento Lama: -
Manicatura: Legno di Wengè
Lunghezza lama: 98mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 119mm.
Lunghezza totale: 219mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 70g.
Chiusura: A molla semplice
Clip: -
Fodero: -
Confezione: scatola tubolare in cartone con loghi Laguiole en Aubrac
Note:L0512RWI-LSB1 -
Laguiole En Aubrac - Texalium - coltello collezione
Coltello chiudibile realizzato artigianalmente dalla Laguiole En Aubrac una delle migliori e più antiche aziende francesi produttrici di coltelli “Laguiole”.
– Acciaio Lama: 12C27 lucidata a specchio
– Manicatura: in Fibra di Carbonio e Texalium
– Lunghezza totale: cm 21,5
– Lunghezza lama: cm 10
– Molla e “mosca” o “ape” (simbolo che contraddistingue un Laguiole visibile sul dorso del coltello) forgiata
– Peso: 89 grammi
3258 -
Boker Plus - Jim Wagner Reality-Based Tanto Blade - PRIVATE COLLECTION - 01BO051
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in very good condition
* Commercially available: No since 2014
* Sharpening: Original
* Marks on blade: No
* Marks on handle: No
* Box: NOT present
* Checked and certified by our internal laboratory
Type of production: industrial
Blade: 440C 58HRC stainless steel
Blade treatment: Teflon
Handle: FNR
Blade length: 98mm.
Blade thickness: 2.5mm.
Closed length: -mm.
Total length: 230mm.
Balancing: -
Weight: 168g.
Closure: Back Lock
Clip: stainless steel
Sheath: -
Notes: design by Jim VagnerBO-01BO051 -
Boker - Annual Damascus 1991 Knife - Limited Edition - PRIVATE COLLECTION - Knife
The Böker Annual Damascus 1991 knife is not just a tool, but a true investment of value, a treasure destined not only for knife lovers but for anyone who appreciates the art and tradition behind such a sought-after object.
This limited piece, part of a private collection and now out of production, represents a unique specimen, numbered and limited to only 999 pieces worldwide.
WITHDRAWN FROM PRIVATE COLLECTION
- Type: Previously Purchased
- Condition: As good as new
- Available in the market: Out of production, numbered and limited to 999 specimens
- Sharpening: Factory sharpening
- Blade marks: No
- Handle marks: No
- Box: Present
- Sheath: Not applicable
- Manuals, Certificates, and Warranties: Present
- Checked and Certified by our internal laboratory
Use Destination: EDC/Gentleman/Collection
Type of production: Industrial
Country of production: Germany - Solingen
Blade: in 300-layer artisanal Damascus steel
Handle: stabilized root wood
Blade length: 80mm
Blade thickness: 2mm
Total length: 186mm
Weight: 136g
Closure: back lock
Packaging: Wooden box with paper certificate and warranty
Note: numbered and limited specimen, as good as new, withdrawn from private collection
BO-1991DC -
Strider Knives - Fixed Tanto Tiger Stripe knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Early 2000s knife, previously purchased.
* Condition: Overall in good condition.
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Small abrasions given by being placed in Kydex sheath.
* Marks on handle: None
* Box: -
* Scabbard: Present
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratory
Intended Use: TacticalProduction type: MidTech
Country of Production: USA
Blade: full tang stainless steel CPM-S30V
Finish: Tiger Stripe
Handle: Paracord
Blade length: 100mm.
Blade thickness: 4.5mm.
Total length: 195mm.
Weight: 125g.
Sheath: thermoformed kydex, with Tek-Lok multi-position attachment
Notes: previously purchased knife, from private collectionST-FTTS-CP -
Laguiole En Aubrac - Ebony and Mammoth Fossil Ivory - Knife
Laguiole en Aubrac's internationally awarded forge is a benchmark for traditional French craftsmanship.
This traditionally designed Laguiole knife bears the LOG (Laguiole Origine Garantie) quality mark, which means it was made entirely by hand in Laguiole by a master blacksmith in accordance with strict quality criteria and LOG production specifications. Depending on the version, it requires from 109 to 216 working steps.
Intended use: regional/collectible
Type of production: handcrafted
Blade: stainless steel Sandvik 12C27
Country of manufacture: France
Handle: ebony wood with mammoth fossil ivory insert
Blade length: 104mm.
Blade thickness: 3mm.
Length closed: 119mm.
Total length: 220mm.
Weight: 104g.
Closure: rear retention spring
Clip: -
Scabbard: -
Notes: -L-ENEBAVFM -
Dietmar Kressler - Integral Drop Point - K190 & Snakewood - PRIVATE COLLECTION - craft knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased.
* Condition: 1989 model, in like-new condition.
* Commercially available: Unique specimen, entirely handmade
* Sharpening: Factory sharpened.
* Marks on blade: None
* Marks on handle: None
* Box: -
* Scabbard: Belt sheath, leather, handmade; with a few small marks of time.
* Manuals, Certificates and Warranties: Warranty certificate issued by the Italian dealer of the time, not stamped or signed.
* Checked and Certified by our in-house laboratoryIntended Use: Collection/Gentleman
Type of production: Handcrafted
Country of Production: Germany
Blade: Bohler K190 powder steel at 62HRC
Blade finish: horizontal satin finish
Handle: integral, from solid, with snakewood grips
Blade length: 83mm
Blade thickness: 4mm.
Total length: 187mm.
Weight: 139g.
Sheath: leather, belt
Packaging: -
Notes: rare handcrafted knife made in 1989 by renowned German cutler Dietmar KresslerFC-KRES-SW-CP -
Francesco Pachi - Custom Folder knife - BG42 & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Condition: in like new condition
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: lacking certificate and packaging.
* Checked and Certified by our in-house laboratoryIntended Use: Collection
Type of production: Handcrafted unique piece by Francesco Pachì made at the direct request of a customer
Country of production: Italy
Blade: stainless steel BG-42 with gold plated opening pin set with hard stone
Handle: gold-plated internal folders, satin-finished stainless steel heads, red micarta spacer, Loveless micarta handle and gold-plated hardware
Blade length: 57mm.
Blade thickness: 3mm.
Total length: 136mm.
Weight: 57g.
Sheath: lizard skin knife pouch
Locking system: Liner Lock
Notes: knife withdrawn from private collectionAP-LF-CP -
Chris Reeve - Small Sebenza Knife - S35VN Steel - PRIVATE COLLECTION
Knife withdrawn from private collection - In like-new condition, complete with certificates, original box, maintenance key. 2014 model - Inspected and certified by our internal laboratory, Coltelleria Collini.
WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: like new
Availability in the market: made in 2014
Sharpening: Factory standard
Blade marks: NONE
Handle marks: NONE
Box: Included
Sheath: Not included
Manuals, Certificates, and Guarantees: Yes
Inspected and Certified by our internal laboratory
Intended use: collectionType of production: Mid-Tech
Country of production: USA
Blade: in S35VN stainless steel 58/59HRC
Handle: titanium
Blade length: 75mm.
Blade thickness: 3mm.
Closed length: 100mm.
Total length: 175mm.
Thickness when closed: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: removable, titanium
Packaging: white cardboard box with Chris Reeve logos and warranty certificatesAP-CR-SS -
Sog - S37 Seal 2000 knife - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Overall in very good condition.
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: No
* Marks on handle: No
* Box: -
* Scabbard: Present - Original
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratory.
The SEAL Team 2000 was designed in collaboration with the Navy SEALs themselves to meet their specific needs in the field. It was introduced in 2001 and quickly became a popular knife among law enforcement professionals, military personnel and tactical knife enthusiasts.
The SOG SEAL Team 2000 Knife was created to withstand the most extreme conditions and challenges in the field, making it a reliable tool for those operating in tactical environments. Its popularity has grown over time due to its reputation as a quality knife built to last and adapt to a variety of situations.
Intended Use: Sporting/Collection
Type of production: Industrial
Blade production: Japan
Blade: AUS-6 stainless steel
Blade Finish: Powder coated
Handle: Zytel
Blade length: 180mm.
Blade thickness: 6mm.
Total length: 315mm.
Balance: on the guard branch
Weight: 359g.
Sheath: made of kydexSOG-S37SEAL-CP -
Chris Reeve - Small Sebenza Knife - Unique Graphic Black Onyx - BG42 Steel - PRIVATE COLLECTION
Knife retired from a private collection - In excellent condition, complete with certificates, original box, maintenance key. A rare specimen from 1998, made of BG42 steel with exquisite titanium handle artwork. Checked and certified by our in-house Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
Type: Previously Purchased and Used
Condition: In excellent condition
Commercial availability: Item produced in 1998
Sharpness: Factory sharpness
Blade marks: None
Handle marks:
Box: Present
Sheath: Cordura
Manuals, Certificates, and Warranties: Yes
Checked and Certified by our in-house laboratory
Intended Use: CollectionProduction Type: Mid-Tech
Country of Production: USA
Blade: BG-42 Stainless Steel 60/61HRC
Handle: Polished Titanium with Computerized "Unique Graphic" Black Onyx Cabochon
Blade Length: 75mm.
Blade Thickness: 3mm.
Closed Length: 100mm.
Overall Length: 175mm.
Closed Thickness: 10mm.
Weight: 81g.
Lock: Frame Lock
Clip: Removable, Titanium
Packaging: White cardboard box with Chris Reeve logos and warranty certificatesCR-SS21APUG -
Gerber - Applegate Fairbairn Knife - PRIVATE COLLECTION - 5780 - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
Type: Previously Purchased
Conditions: in excellent conditions
Available in the market: NO
Sharpening: Original
Marks on blade: NO
Marks on handle: NO
Packaging: NO, without original box
Checked and Certified by our internal laboratory
Intended use: Tactical/MilitaryBlade: in 154CM stainless steel
Blade Production: USA
Handle: Zytel
Blade Length: 95mm.
Blade Thickness: 3mm.
Closed Length: 125mm.
Total Length: 220mm.
Balancing: -
Weight: 113g.
Closure: Liner Lock
Clip: -
Sheath: -
Notes: without boxAP-GE-APP -
SOG - Vulcan Black TiNi - VL11 - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously purchased, but not used.
* Condition: Overall in good condition with some aesthetic dissimilarity of the Black TiNi finish due to time
* Commercially available Discontinued
* Sharpening: Factory.
* Marks on blade: Uneven color of Black TiNi finish given by signs of time
* Marks on handle: No.
* Box: Present, worn
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting
Production type: Industrial
Country of Production: Japan
Blade: Stainless steel VG-10
Blade finish: Black TiNi
Handle: Zytel with steel liners
Blade length: 90mm.
Blade thickness: 4mm.
Length closed: 120mm.
Total length: 210mm.
Thickness when closed: 20mm.
Weight: 135g.
Closure: Arc Lock
Clip: removable, stainless steel
Packaging: cardboard box with SOG logos
Notes: previously purchased knife, from private collectionSOGVL11-CP