Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Rockstead - Hizen - DLC YXR7 & Duralumin - Folding Knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: in Hitachi YXR7 steel at 64HRC
Blade treatment: Black DLC mirror
Handle: A7075 Duralumin with Hv400 hardness anodizing
Blade length: 70mm.
Blade thickness: 3.3mm.
Length closed: 104mm.
Total length: 176mm.
Thick when closed: 11.4mm.
Weight: 74g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel of 1mm. with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: -RO-HIZ-DLC -
Rockstead - Hizen - ZDP-189 & Duralumin - Folding Knife made in Japan
Blade: stainless steel ZDP-189 to 67.2HRC
Handle: Duralumin A2024 with anodized surface to HV400
Blade length: 73 mm.
Blade Thickness: 3.5 mm.
Overall length: 176 mm.
Weight: 172 g.
Lock: Frame Lock with a swing in SKD11 61HRC
Clip: Steel 402J2 to 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.RO-HIZ-ZDP189 -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Cold Steel - Recon Tanto - Carbon V Made in USA - 1995 NOS Full Set - PRIVATE COLLECTION - 13RT - knife
KNIFE NOS FULL SET, NEW FROM STOCK
* Type: 1995 NOS knife - New Old Stock - New from stock
* Condition: Like new
* Commercially available Out of production
* Sharpening: Factory.
* Marks on blade: Given by time
* Marks on handle: Given by time.
* Box: Present, original, in very good condition
* Scabbard: Present, original, in very good condition, with small marks given by time
* Manuals, Certificates and Warranties: - -
* Checked and Certified by our in-house laboratoryIntended use: collection / tactical / sporting
Type of production: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balance: advanced
Weight: 265g.
Sheath: Cordura
Packaging: cardboard box with Cold Steel logos and "Made in USA" logos.
Notes: knife from 1995 NOS - New Old Stock - New from stockCS-13RTCP -
Cold Steel - AD-10 Lite - Drop Point Knife by Andrew Demko - FL-AD10 - folding knife
The AD-10 Lite is the cheaper version of the AD-10 folder with which it shares most of the features, style and high-performance potential such as our unique Tri-Ad Lock, blade configurations and steel thickness. However, we chose to use less expensive materials in manufacturing: for example, instead of G-10 handles we used GFN and for the blade steel we chose to use an AUS 10A instead of CPM-S35VN while still remaining razor sharp and ready for action!
Intended Use: Sport/Utility
Production Type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel AUS-10A
Blade finish: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3.8mm.
Total length: 222mm.
Weight: 186g.
Locking system: Tri-Ad Lock
Clip: Reversible and removable, stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCSFL-AD10 -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Cold Steel - Thompson Voyager - Signature Limited Edition - 29UXV - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
SERIAL NUMBER 0231
* Type: Previously Purchased
* Condition: Overall in good condition
* Commercially available Limited series, discontinued
* Sharpening: Factory
* Marks on blade: Slight, uneven treatment in places (factory, not due to wear)
* Marks on handle: No
* Box: Present and original, WITH AUTOGRAPH SIGNATURE OF LYNN THOMPSON
* Scabbard: Not present
* Manuals, Certificates and Warranties: no
* Checked and certified by our in-house laboratoryIntended use: Sporting/EDC
Production type: Industrial
Country of manufacture: Taiwan
Blade: Stainless steel Carpenter CTS XHP Alloy 59/60HRC
Blade treatment: DLC
Handle: Griv-Ex
Blade length: 135mm.
Blade thickness: 3.6mm.
Length closed: 170mm.
Total length: 304mm.
Weight: 208g.
Closure: Back Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition (serial no. 0231) with signature of "Lynn C. Thompson" laser engraved on the blade and in pen on the packagingCS29UXV -
Cold Steel - Caledonian knife - PRIVATE COLLECTION - San Mai III - Micarta Handles - CS60CE
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in like-new condition with perfect original box
* Commercially available Discontinued since 2013
* Sharpening: Original edge
* Marks on blade: no
* Marks on handle: no
* Box: yes
* Scabbard: no
* Manuals, Certificates and Guarantees: no
* Checked and certified by our in-house laboratoryIntended use: Sporting / Utility
Production type: Industrial
Country of manufacture: Japan
Blade: SANMAI stainless steel
Blade finish: Satin finish
Handle: Micarta and Titanium
Blade length: 115mm
Blade thickness: 4mm.
Total length: 235mm.
Weight: 152g.
Closure: Liner Lock
Clip: Stainless steel
Packaging: aluminium box with Cold Steel logos
Notes: -For almost a decade, Cold Steel® offered a wicked-looking little boot knife called the Culloden®. It was based on the traditional Scottish 'black knife' or 'Skean Dhu' as it is more commonly called in Gaelic, the ancient language of Scotland.
The Caledonian Edge™ features a number of modern variations and refinements over its predecessor. The blade is made of a virtually unbreakable San Mai III® construction and, like the original Skean Dhu, features a thin, sharp point, as sharp as the proverbial needle.
The traditional tang seen on the Skean Dhu of yesteryear has been retained and provides an aggressive, non-slip platform for the thumb and forefinger, allowing for better control when using the blade to cut or pierce.
The handle of the Caledonian Edge™ has a profile that hugs the palm of the hand and a relatively thin cross-section that enhances its qualities. It is flat enough not to roll or twist in the palm of the hand, yet comfortable enough to accommodate a wide range of grip styles. A perfect blend of strength and beauty, it features a mirror-polished black Micarta superstructure and titanium bolsters.ne handed opening.
AP-CS-60CE -
Cold Steel - Vintage Original Tanto SAN MAI - Made in Japan - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
The first and original Tanto "Made in Japan", here in a 1980's version with a San Mai steel blade, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto.
* Type: Previously Purchased
* Condition: very good, never used, some light surface marks (visible against the light)
* Commercially available Out of production
* Sharpening: Original wire
* Marks on blade: yes, superficial
* Marks on handle: no
* Box: no
* Scabbard: Present - Original, in good general condition, some marks present
* Manuals, Certificates and Warranties: no
* Checked and certified by our internal laboratoryIntended use: Collection
Type of production: Industrial
Country of manufacture: Japan
Blade: San Mai steel - Made in Japan
Blade treatment: satin finish
Handle: Kraton with brass guard and pommel
Blade length: 145m
Blade thickness: 4.7mm.
Total length: 285mm.
Balance: recessed
Weight: 268g.
Sheath: Black leather, branded "Japan".
Packaging: without original box
Notes: Knife from a private collection, first series, produced in the 1980s and out of production since the 1990s, overall in very good condition.AP-TAN-SM -
Cold Steel - Espada XL knife - PRIVATE COLLECTION - 62NX - knife
Knife withdrawn from a private collection - In like new condition - Comes with original box - Checked and certified by our internal laboratory Coltelleria Collini
Intended use: Sports / Collection
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-8A stainless steel
Blade treatment: -
Handle: Aluminum 7075 and G-10
Blade length: 195mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: -
Balancing: -
Weight: 425g.
Closure: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -AP-62NX -
Cold Steel - Vintage Original Brass Tanto - Made in Japan - PRIVATE COLLECTION - 13A - knife
Knife from a private collection - The first and original Tanto "Made in Japan", here in the second series from 1986, progenitor of the modern generation continued with the Master Tanto, Magnum Tanto and Recon Tanto - Overall in very good condition, with no particular scratches, marks or abrasions on blade and handle; a few small marks of time on scabbard - Product still has original factory sharpening, although it would need a brightening-no signs of wear anyway - Supplied with its own original leather scabbard marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: Japan
Blade: made of "Cold Steel's 400 Series Stainless" steel (presumably 420 stainless)
Blade treatment: satin finish
Handle: made of Kraton with brass guard and pommel
Blade length: 145m.
Blade thickness: 5mm.
Total length: 285mm.
Balance: backward
Weight: 259g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13ACP -
Cold Steel - Vintage Gen I Trailmaster - Made in USA - PRIVATE COLLECTION - 16 - knife
Knife from a private collection - First series, first generation, the first and original "Made in USA" Trailmaster from 1988 - Overall in good condition, shows small signs of oxidation on the blade and some minor signs of time on the leather sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath, but lacking box and manuals - Checked and certified by our in-house lab.
Intended use: collectionType of manufacture: Industrial
Country of manufacture: USA
Blade: Carbon V steel
Blade treatment: satin finish
Handle: kraton and brass
Blade length: 240mm.
Blade thickness: 8mm.
Total length: 370mm.
Balance: advanced
Weight: 515g.
Sheath: black leather
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988, overall in good condition.16CP -
Cold Steel - Vintage Original Magnum Tanto - Made in Japan - PRIVATE COLLECTION - 13M - knife
Knife from a private collection - The first and original Magnum Tanto "Made in Japan" from 1988, progenitor of the modern generation continued with the Magnum Tanto II in 1990 - Overall in very good condition, with no particular scratches, marks or abrasions on blade, handle and sheath - Product does not appear to have the original factory sharpening, but still has no signs of wear - Supplied with its own original leather sheath marked "Japan", but lacking box and manuals - Checked and certified by our in-house laboratory.
Intended use: collection
Type of manufacture: Industrial
Country of manufacture: Japan
Blade: stainless steel AUS-8A
Blade treatment: satin finish
Handle: kraton
Blade length: 230mm.
Blade thickness: 5mm.
Total length: 370mm.
Balance: advanced
Weight: 330g.
Sheath: black leather, marked "Japan"
Packaging: without original box
Notes: knife from private collection, first series, produced in 1988 and discontinued in 1990, overall in very good condition.13MCP -
Cold Steel - Recon Tanto Carbon V - Made in USA - PRIVATE COLLECTION - 13RT - knife
Knife from a private collection - The original Recon Tanto "Made in USA" of the '90s, progenitor of the current generation - Absolutely like new, never taken out of the box, still with the original factory grease on the blade, sheath without signs of use and knife insertion - Complete, with original box and Cold Steel warranty - Checked and certified by our internal laboratory.
Intended use: collection / tactical / sportingProduction type: Industrial
Country of Production: USA
Blade: Carbon V steel
Blade treatment: varnishing
Handle: Kraton
Blade length: 179mm.
Blade thickness: 5mm.
Total length: 298mm.
Balancing: advanced
Weight: 265g.
Scabbard: Simil-leather
Package: Cardboard box with Cold Steel and "Made in USA" logos
Notes: Knife from a private collection - Made in the late 90's (presumably 1997/1998) - Absolutely like new13RTCP -
Cold Steel - Oyabun Tanto Flipper Folder Knife - Signature Limited Edition - 32AA - knife
Intended Use: Sporting/EDC
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN 59/60HRC
Blade Treatment: Satin finish
Handle: Aluminum T6061 mirror polished with G10 inserts
Blade length: 89mm.
Blade thickness: 3.8mm.
Length closed: 120mm.
Total length: 209mm.
Weight: 125g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: Stainless steel, removable
Package: Cardboard box with Cold Steel logos
Notes: Numbered and limited edition of only 3500 pieces with signature of "Lynn C. Thompson" laser engraved on the blade and pencilled on the product packaging.FROM COLD STEEL WEBSITE
The Oyabun Limited is a high-end collector's version of our Oyabun. It shares features in common with the standard model in terms of functionality and appearance, but differs greatly in the materials used in its construction. It also has the value of being a collectible keepsake as only 3500 were produced. Each one is serially numbered and each box will be personally signed by Lynn C. Thompson himself! The blade's fine S35VN steel is an expensive powder coated steel that is heat treated to Rc 59-60 and hardened to sub zero. It has been given an attractive two-tone finish on the blade planes and a high satin polish on the blade bevels. Notably, the handle frame is milled from two solid billets of 6061 aluminum to create the bolster and pommel, which has been given a beautiful mirror polished finish. The handle also features CNC-machined G-10 plates with a diamond checkerboard pattern for a good, secure grip.
"I like flashy knives and when they are limited collector's editions with serial numbers made from high quality materials, I like them even more. That's why I think you'll like our Oyabun Limited. Only 3500 pieces will be made. All individually serial numbered with 6061 aluminum frames, CNC machined handles that are completely checkered just like my much original and a two-tone polished S35VN blade! And best of all, all this splendor and high performance is backed by our state-of-the-art leaf spring lock and secondary safety, so you know it won't bend on your hand. Now you have a knife that is worth every penny asked (just compare) and has tremendous appeal/appreciation from collectors!!!" - Lynn Thompson
CS32AA -
Cold Steel - Kyoto II Mini Japanese Drop - 17DB - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13MoV
Blade finish: Satin finish
Handle: Kray-Ex™
Blade length: 82mm.
Blade thickness: 3mm.
Total length: 168mm.
Weight: 93.5g.
Scabbard: Secure-Ex® thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Note: the package does not include the sheath's docking system or attachment system.CS17DB -
Cold Steel - Tim Wells Slock Master - 20VSTW - knife
Intended Use: Sporting / Hunting
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel 1.4116
Blade Finish: Polished
Handle: Kray-Ex™
Blade length: 165mm.
Blade thickness: 3.5mm.
Total length: 298mm.
Weight: 159g.
Scabbard: Secure-Ex® in thermoplastic material
Packaging: Cardboard box with Cold Steel logos
Notes: Made in collaboration with Tim Wells, one of the most famous bow and skeet hunters in the world.CS20VSTW -
Cold Steel - SRK in San Mai - # 35AN - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel laminated with cutting edge in VG-10
Blade treatment: satin finish
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 249g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logos
Notes: new production 2018CS35AP -
Cold Steel - Recon 1 Tanto - Black Plain - 27BT - knife
Intended Use: Sporting / Tactical
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel CPM-S35VN
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total lenght: 238mm.
Thickness when closed: 13mm.
Weight: 147g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Package: cardboard box with Cold Steel logos
Notes: -CS27BT -
Cold Steel - Spetsnaz Special Forces Trench Shovel - 92SSFX - shovel
The Special Forces Shovel takes its cue directly from the military spade used by the Soviet Spetnaz, one of the elite corps of the former Soviet Union.
The head of the spade is forged in painted carbon steel and has a utility / ax sharpening that can easily be resumed to give a razor sharpening; the handle is instead in wood.
Blade: in painted carbon steel
Handle: American walnut wood
Total length: 76.2cm.
Width: 15cm.
Thickness: 2.5mm
Weight: 1003g.CS92SSFX -
Cold Steel - AD-15 Black Knife by Andrew Demko - 58SQB - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin finish
Handle: aluminum and G-10
Blade length: 90mm.
Blade thickness: 3.7mm.
Total length: 220mm.
Weight: 185g.
Closing: Scorpion Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS58SQB -
Cold Steel - AD-10 by Andrew Demko - 28DD - folding knife
Intended use: Sports / Utility
Type of production: Industrial
Country of production: Taiwan
Blade: CPM-S35VN stainless steel
Blade treatment: Satin finish
Handle: G-10
Blade length: 91mm.
Blade thickness: 3.8mm.
Total length: 223mm.
Weight: 202g.
Closing: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS28DD -
Cold Steel - Espada XL G10 Knife - 62MGC - folding knife
Intended use: Sports / Collection
Type of production: Industrial
Country of production: Taiwan
Blade: AUS-10A stainless steel
Blade treatment: Stonewashed
Handle: G-10
Blade length: 191mm.
Blade thickness: 4mm.
Total length: 425mm.
Thick when closed: 10.4mm
Weight: 403g.
Closing: Tri-Ad Lock
Clip: Reversible and removable, in stainless steel
Sheath: -
Packaging: cardboard box with Cold Steel logos
Note: -CS62MGC -
Rockstead - Higo II F-HTI-ZDP - Titanium ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and tightness of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.5HRC
Blade treatment: mirror polished
Handle: titanium
Blade length: 90mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 12.2mm.
Weight: 136g.
Opening: through ambidextrous pin
Washers: in brass
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 096 - Date of production 05 July 2019HIGOIIHTIZ -
Rockstead - Shin knife DLC - YXR7 - knife
This knife blade is convex on both sides in the tradition of the highly praised Japanese sword. This shape is both sharp and strong, and can still slice cleanly through a sheet of paper even after the punishment of chopping and cutting through dried bamboo. Using this special blade shape is an excellent way of allowing an edge to be thick without sacrificing any of its sharpness. This knife is of preeminent sharpness. This is a durable knife with strong cutting capabilities that will last for a long time. Even when used for rigorous cutting, the blade will not bite or catch thanks to its convex shape. Other knives will often bite or catch, and may acquire nicks if pulled out suddenly.
Blade: XR-7 steel at 64.3 HRC with DLC treatment
Handle: Same (real breed leather) and aeronautical aluminum with Hv400 black alumite treatment
Blade length: 95 mm.
Blade thickness: 4 mm.
Total length: 210 mm.
Weight: 145 g.
Closing: Liner Lock in 402J2 steel at 52HRC
Clip: in 402J2 steel at 52HRC
Notes: Accompanied by a warranty certificate with technical specifications.RS-SHIN-B -
Cold Steel - Laredo Bowie O-1 Steel - 39LLBMT - knife
Intended use: Sports / Hunting / Collection
Type of production: Industrial
Country of production: Taiwan
Blade: carbon steel O-1
Blade treatment: satin finish
Handle: micarta, with brass guard
Blade length: 269mm.
Blade thickness: 7.6mm.
Total length: 399mm.
Balancing: advanced
Weight: 483g.
Sheath: in ABS, of the SecurEx type
Packaging: cardboard box with Cold Steel logos
Note: -39LLBMT -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Cold Steel - Khan - Silver Eye & Blue G10 - 54T - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-8A
Blade treatment: Satin
Handle: G10
Blade length: 76mm.
Blade thickness: 3mm.
Length closed: 102mm.
Total length: 178mm.
Weight: 68g.
Closure: Tri-Ad Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Cold Steel logos
Note: -CS54T -
Cold Steel - Grik - Black & Tan - 28E - knife
Intended use: Sports / EDC
Type of production: Industrial
Country of production: Taiwan
Blade: stainless steel AUS-8A
Blade treatment: Satin
Handle: GFN
Blade length: 76mm.
Blade thickness: 3.5mm.
Closed length: 98mm.
Total length: 174mm.
Weight: 94g.
Closure: Tri-Ad Lock
Clip: integrated, in GFN
Packaging: Cardboard box with Cold Steel logos
Notes: Design by Andrew DemkoCS28E -
Cold Steel - Pro Lite Tanto - Black - 20NST - Knife
Purpose: Sportsman / EDC
Type of production: Industrial
Country of Origin: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Stone washed
Handle: GFN
Blade Length: 89mm.
Blade thickness: 3mm.
Closed length: 114mm.
Overall length: 203mm.
Weight: 85g.
Closure: Tri-Ad Lock
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with Cold Steel logosCS20NST -
Cold Steel - Crawford Model 1 Flipper - 20MWC - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: 4033 stainless steel
Blade treatment: Satin finish
Handle: Zy-Ex
Blade length: 92mm.
Blade thickness: 3.3mm.
Length closed: 122mm.
Total length: 212mm.
Thick when closed: 14mm.
Weight: 120g.
Closure: Liner Lock with additional safety catch on the right handle
Clip: stainless steel, removable
Packaging: cardboard box with Cold Steel logos
Notes: opening system by carson flipper system - Design by Wes CrawfordCS20MWC -
Cold Steel - Marauder Bowie - Plain StoneWashed - 39LSWBA - knife
Use: Sporting
Production Type: Industrial
Country of Production: Taiwan
Blade: stainless steel AUS-8A
Blade finishing: stonewashed
Handle: Kray-Ex kraton
Blade Length: 229mm.
Blade thickness: 4,7mm.
Total length: 359mm.
Balance: on guard branch
Weight: 352g.
Scabbard: Secur-Ex Thermoplastic
Packaging: cardboard box with Cold Steel logos
Notes: -CS39LSWBA -
Cold Steel - 1917 Frontier Bowie Knife 88CSAB - knife
Sturdy bowie knife with clip point blade made of steel with a high carbon content.
Employment: Sports / Collection
Type of production: seeds / craft
Lama production: India
Blade: 1085 High Carbon steel
Lama treatment: burnishing
Handle: rose wood
Blade length: 305mm.
Blade thickness: 6.2mm.
Total length: 440mm.
Balancing: set back
Weight: 658g.
Sheath: in leather and metal
Package: -
Note:CS88CSAB -
Cold Steel - Kukri Plus Machete - CS97KMPS - knife
Intended use: Hiking
Type of production: Industrial
Country of production: South Africa
Blade: 1055 carbon steel
Blade treatment: black protective paint
Handle: Polypropylene
Blade length: 330mm.
Blade thickness: 3mm.
Total length: 470mm.
Balancing: Advanced
Weight: 566g.
Opening: Carson Flipper system
Sheath: Nylon with rigid plastic parts
Packaging: Transparent plastic bag
Note: -CS97KMPS -
Rockstead - Chou HPC - Black Silk - neck knife
With the Rockstead brand, of Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently being marketed.
Created by Katsumi Kitano, who has been producing quality knives for over 20 years, to the extent that they have been awarded the highest recognition among the artisanal cutlers in Japan, they prove to be exceptional both in cutting, penetration and thread strength and in terms of innovation for the materials used and for construction techniques.
Blade: Hitachi YXR7 65HRC steel with HPC titanium cover
Handle: interweaving in silk tied by hand
Blade length: 45 mm.
Blade thickness: 4 mm.
Total length: 120 mm.
Weight: 60 g.
Sheath: neck, in Kydex
Notes: Accompanied by silk bag and certificate of guarantee with technical specifications.4069BLACK -
Cold Steel - Immortal Lock Back Desert Knife - 23GVB - knife
Designed by Mike Wallace, the Immortal model was inspired by the shape of the famous Roman daggerIntended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 120mm.
Total length: 220mm.
Thick when closed: 10mm.
Weight: 168g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -CS23GVB -
Cold Steel - SRK - Survival Rescue Knife - 49LCKZ - knife
Intended use: tactical / sports
Type of production: Industrial
Country of production: Taiwan
Blade: SK-5 carbon steel
Blade treatment: Black Tuff-Ex painting
Handle: Kray-Ex (Kraton)
Blade length: 155mm.
Blade thickness: 5mm.
Total length: 275mm.
Balancing: on the guard branch
Weight: 230g.
Sheath: Secure-Ex in ABS
Packaging: cardboard box with Cold Steel logosCS49LCKZ -
EOS Elite Outfitting Solutions - Prawn Black Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-B -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Tanto - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Black - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-BK -
EOS Elite Outfitting Solutions - Prawn Friction Folder Tanto Carbon/Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL -
Cold Steel - Black Talon II Plain - 22BT - knife
Intended use: Sports / Tactical
Type of production: Industrial
Country of production: Taiwan
Blade: CTS-XHP 60 / 61HRC stainless steel
Blade treatment: Satin
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Length closed: 142mm.
Total length: 244mm.
Thick when closed: 10mm.
Weight: 136g.
Closure: Tri-Ad Lock
Clip: removable and reversible, in stainless steel
Packaging: cardboard box with Cold Steel logos
Note: -CS22BT -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORBG -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SQGBB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQG -
EOS Elite Outfitting Solutions - Surgeon Titanium - knife
Intended use: Tactical / Collective
Type of production: artisanal seed
Country of Origin: USA
Blade: CTS-XHP stainless steel
Blade Treatment: Black PVD
Grip: Titanium Grade 5
Blade length: 92mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 13.2mm.
Balance: -
Weight: 187g.
Opening: Titanium thumbstood for the righteous
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SUR -
EOS Elite Outfitting Solutions - Squid - Blue Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQB -
Cold Steel - Pro Lite Sport - Blue - 20NVLU - knife
Purpose: Sportsman / EDC
Type of production: Industrial
Country of Origin: Taiwan
Blade: Stainless steel 1.4116
Blade treatment: Stone washed
Handle: GFN
Blade Length: 89mm.
Blade thickness: 3mm.
Closed length: 114mm.
Overall length: 203mm.
Weight: 85g.
Closure: Tri-Ad Lock
Clip: Removable and reversible, stainless steel
Packing: Cardboard box with Cold Steel logos20NVLU -
Rockstead - TEI DLC - 65hrc - knife collection
This knife can still slice paper even after the punishment of striking and cutting dried bamboo.This knife has a beautiful convex surface with extreme sharpness.This is a flagship of the ROCKSTEAD folding knife collection. Both sides of the blade are convex. The blade is in the shape of the traditional Japanese sword. It cuts well and is strong. You can enjoy its strong cutting capabilities for a long time.
Full length: 213.00 mm
Blade length: 93.00 mm
Weight: 155 g
Thickness: 3.70 mm
Material: YXR7
Hardness: HRC65
Blade geometry: Honzukuri
Hard coating: DLC
Knives type: FolderRO-TEI -
Cold Steel - Recon 1 Tanto - Dark Earth - 27TLSVF - knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: DLC coating
Handle: G10
Blade length: 102mm.
Blade thickness: 3.5mm.
Closed Length: 136mm.
Overall length: 238mm.
Thick when closed: 13mm.
Weight: 147g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: -C27TLSVF -
Cold Steel - Steve Austin Working Man - Blaze Orange - 54NVRY - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: 1.4116 stainless steel
Blade treatment: Satin finish
Handle: GFN
Blade length: 89mm.
Blade thickness: 3mm.
Closed Length: 114mm.
Overall length: 203mm.
Weight: 88g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: Cardboard box with Cold Steel logos
Notes: -C54NVRY -
Cold Steel - Bird and Game - 20AZ - hunting knife
Intended Use: Hunting
Type of production: Industrial
Production Country: Japan
Blade: AUS-8A stainless steel
Blade treatment: satin finish
Handle: ABS
Blade length: 82mm.
Blade thickness: 2 mm.
Overall length: 184mm.
Weight: 39g.
Sheath: Secure-Ex in ABS
Packaging: Sealed box with Cold Steel logos
Notes: -CS20AZ -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Cold Steel - CPM-3V Master Hunter - 36CC - knife
Intended use: Sport / Hunting
Type of production: Industrial
Pase production: Taiwan
Blade: CPM-3V steel
Blade treatment: Black DLC
Handle: Kraton
Blade length: 114mm.
Blade thickness: 4.8mm.
Overall length: 235mm.
Balancing: back to 1cm from the guard branch
Weight: 168g.
Sheath: ABS
Packaging: cardboard box with Cold Steel logos
Notes: -12613 -
Cold Steel - Talwar 5.5 "- Serrated - 21TTXLS - knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: Satin finish
Handle: G10
Blade length: 139mm.
Blade thickness: 4mm.
Closed Length: 190mm.
Overall length: 324mm.
closed Thickness: 13mm.
Weight: 234g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko12519 -
Cold Steel - Talwar 5.5 "- Plain Edge - 21TTXL - knife
Intended use: Sports / Tactical
Type of production: Industrial
Production Country: Taiwan
Blade: CTS-XHP Stainless Steel 60 / 61HRC
Blade treatment: Satin finish
Handle: G10
Blade length: 139mm.
Blade thickness: 4mm.
Closed Length: 190mm.
Overall length: 324mm.
closed Thickness: 13mm.
Weight: 234g.
Closing: Tri-Ad Lock
Clip: removable and reversible, stainless steel
Packaging: cardboard box with Cold Steel logos
Notes: Design by Andrew Demko12518 -
Rockstead - SHUN Titanium ZDP-189 by Sinkevich - knife
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate12431 -
Cold Steel - Mini Tuff Lite Orange - 20MTRY - coltello
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox AUS-8A
Trattamento Lama: -
Manicatura: Grivory
Lunghezza lama: 50mm.
Spessore lama: 3mm.
Lunghezza chiuso: 80mm.
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 42g.
Chiusura: Tri-Ad Lock
Clip: Acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Cold Steel
Note: -12378 -
Cold Steel - Mini Tuff Lite Pink - 20MTP coltello
Destinazione d'uso: Sportivo/EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: in acciaio inox AUS-8A
Trattamento Lama: -
Manicatura: Grivory
Lunghezza lama: 50mm.
Spessore lama: 3mm.
Lunghezza chiuso: 80mm.
Lunghezza totale: 130mm.
Spessore da chiuso: -
Bilanciatura: -
Peso: 42g.
Chiusura: Tri-Ad Lock
Clip: Acciaio inox
Fodero: -
Confezione: Scatola di cartone con loghi Cold Steel
Note: -12333 -
Cold Steel - Spartan folding Kopis - 21ST - knife
Utilisation: Sport
Type de production: industriel
Lame de production: Taiwan
Lame: acier inoxydable AUS 10A
Traitement de la lame: délavé
Manche: Grivory
Longueur de la lame: 114 mm.
Épaisseur de lame: 4mm.
Longueur fermé: 152 mm.
Longueur totale: 266mm.
Épaisseur une fois plié: -
Equilibrage: -
Poids: 260g.
Fermoir: Tri-Ad verrouillage
Clips: acier inoxydable amovible
Gaine: -
Conditionnement: boîte en carton avec des logos de Cold Steel
Notes: -CS21ST -
Cold Steel - Counter Point XL - 10AA - Knife
Intended Use: Sport / Tactician
Type of production: Industrial
Production Lama: Taiwan
Blade: AUS-10A stainless steel
Treatment Lama: -
Handle: Grivory
Blade length: 152mm.
Blade thickness: 4mm.
Closed Length: 180mm.
Overall length: 335mm.
Thick when closed: -
Balancing: -
Weight: 224g.
Clasp: Tri-Ad Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos Cold Steel
Notes: -CS10AA -
Rockstead - SAI Titanium ZDP-189 - knife
Rockstead - SAI Titanium ZDP-189 - knife
Blade: ZDP-189 in 66.8HRC
Handle material: titanium
Blade length: 80 mm.
Blade Thickness: 3.7 mm.
Overall length: 190 mm.
Weight: 140g.
Closure: liner lock
Sheath: Black leather
Notes: Accompanied by a certificate of guarantee with the technical specifications.SAI -
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
Rockstead - Higo-X-IW - Ironwood ZDP-189 - knife
With the brand Rockstead, Ishida Co. in Sakai, Japan, are currently marketed the best industrial knives currently in production.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: ZDP-189 in 66.8HRC
Handle material: stainless steel and wood SUS420J2 Ironwood
Blade length: 90 mm.
Blade Thickness: 3 mm.
Overall length: 215 mm.
Weight: 133g.
Lock: Frame Lock with swing SKD11 to 61HRC
Clip: 402J2 steel at 48HRC
Notes: Accompanied by a certificate of guarantee with the technical specifications.10887 -
Rockstead - Chu DLT - knife
Rockstead - Chu DLT - knife
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest honor among the artisan knife makers in Japan, proved to be exceptional in cutting capacity, penetration and sealing wire is at the level of innovation for materials and construction techniques.
Blade: Stainless steel with 64HRC Hitachi YXR7 to cover DLT571 3micron
Handle: in green paracord
Blade length: 120mm.
Blade Thickness: 6mm.
Overall length: 2150mm.
Weight: 284g.
Balancing: 1cm back from the lower branch of the guard
Sheath: Leather
Note: Product is out of printChu002 -
Cold Steel - Jungle Machete 16" - knife
Specifications:
Blade Length: 16"
Overall Length: 22"
Steel: 1055 Carbon Steel w/ Black Baked on Anti Rust Matte Finish
Weight: 23.4 oz
Blade Thickness: 2.8 mm
Handle: 5 5/8" Long. Polypropylene
Sheath: Cor-Ex™ SheathMade from tough rigid 1055 carbon steel with a strong spring temper, it's virtually unbreakable and offers the weight forward balance necessary to chop through vines, saplings, and brush and even trees with ease. What's more, its sharp point offers plenty of belly for slashing or even skinning, and in an emergency, adds to it value as an improvised self defense tool. Sold fully sharpened, and shipped with a sturdy nylon sheath, it's ready for your jungle wherever it may be.
CS97JMS -
Cold Steel - AK-47 G-10 - 58LAKB - coltello
Destinazione d'uso: Tatticoo/Militare
Tipo di produzione: industriale
Lama: in acciaio inox AUS-8A
Trattamento Lama: Teflonatura
Produzione Lama: Taiwan
Manicatura: G-10 con liners in acciaio inox
Lunghezza lama: 90mm.
Spessore della lama: 3.5mm.
Lunghezza chiuso: 142mm.
Lunghezza totale: 232mm.
Bilanciatura: -
Peso: 184g.
Chiusura: Front Lock
Clip: amovibile e reversibile, in acciaio inox
Fodero: -
Note: -2537B -
Cold Steel - Recon 1 Spear Point Serrated - 27TLSH knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Blade: Taiwan
Blade: Stainless steel AUS-8A
Treatment Blade: Teflon
Handle: G-10
Blade length: 101mm.
Blade thickness: 3.5mm.
Length closed: 136mm.
Total length: 238mm.
Thick when closed: -
Balance: -
Weight: 150g.
Clasp: Tri-Ad Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos Cold Steel
Notes: -6522S -
Cold Steel - American Lawman - 58AL coltello
Destinazione d'uso: Tattico / EDC
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8 58HRC
Trattamento Lama: Teflon
Manicatura: G-10
Lunghezza lama: 83mm.
Spessore lama: 3mm.
Lunghezza totale: 205mm.
Spessore da chiuso: 14mm.
Bilanciatura: -
Peso: 162g.
Chiusura: Tri-Ad Lock
Clip: in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Cold Steel
Note: -5594 -
Cold Steel - Black Rock Hunter - 24SJP - coltello
Destinazione d'uso: Sportivo/Caccia
Tipo di produzione: Industriale
Produzione Lama: Taiwan
Lama: In acciaio inox AUS-8A - 55/57HRC
Trattamento Lama:
Manicatura: Grivory
Lunghezza lama: 100mm.
Spessore lama: 3mm.
Lunghezza chiuso: 123mm.
Lunghezza totale: 224mm.
Spessore da chiuso: 16mm.
Bilanciatura: -
Peso: 152g.
Chiusura: Molle di ritenzione su entrambi i manici
Clip: Amovibile, in acciaio inox
Fodero: -
Confezione: scatola in cartone con loghi Cold Steel
Note: non utilizzabile come un coltello balisong/butterfly4298