Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
CRKT - M16-12LE knife Small Law Enforcement Tanto - PRIVATE COLLECTION - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Provenance: Collected by a private individual, previously purchased
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpness: Factory
* Marks on blade: small marks on tip
* Marks on handle: clip slightly marked
* Box: Without box
* Sheath: /
* Manuals, Certificates and Warranties: -
* Checked and Certified by our internal laboratoryBlade: Teflon-coated AUS-8 high-carbon 57/58HRC stainless steel
Handle: Zytel grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Total length: 185mm.
Weight: 97g.
Closure: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety catchAP-CM16-12LE -
Maserin - Daga by Attilio Morotti - Elmax & Blue Fat Carbon - 372/B - knife
Intended use: collectible / sporting
Type of production: Industrial
Country of Production: Italy
Blade: Elmax steel at 61HRC
Blade finish: satin-finished
Handle: Made of anodized titanium and Fat Carbon with blue highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-372/B -
Maserin - Daga by Attilio Morotti - Rose Damascus & Gold Fat Carbon - 372/DG - knife
Intended use: collectible / sporting
Type of production: Industrial
Country of Production: Italy
Blade: Stainless damascus steel "Rose"
Blade treatment:
Handle: In titanium and Fat Carbon with gold highlights
Blade length: 80mm.
Blade thickness: 3.4mm.
Total length: 175mm.
Weight: 92g.
Closure: Frame Lock
Clip: absent
Sheath: leather pocket
Packaging: cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-372/DG -
CRKT - P.S.D. II (Particle. Separation. Device.) by Hammond - AUS-10 & Brown G10 - 7910 - knife
Jim Hammond's original P.S.D. earned its name (Particle. Separation. Device.) for its ability to cut anything, anywhere. The P.S.D. II brings that same capability to a smaller, more portable folding knife, reducing the overall length by more than an inch. The blade is made of corrosion-resistant AUS10 with assisted opening on IKBS ball bearings that ensure quick and easy one-handed operation.
Intended Use: Tactical / EDC
Production Type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-10A
Blade Treatment: Black Oxide
Handle: G10
Blade Length: 76mm.
Blade thickness: 2.8mm.
Length closed: 101mm.
Total length: 178mm.
Weight: 102g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC7910 -
CRKT - A.B.C. (All. Bases. Covered.) by Hammond - 12C27 & Black G10 - 2606 - knife
Jim Hammond's A.B.C. (All. Bases. Covered.) makes its return in an even more versatile form. It is now a folder, bringing the varied capabilities of the original fixed blade into a more convenient and compact design. With its assisted opening and IKBS pads, it's always ready for action at any time, while the G10 handle provides a strong grip even in adverse weather conditions.
Intended Use: Tactical
Production Type: Industrial
Country of Production: China
Blade: Sandvik 12C27 stainless steel
Blade treatment: Black Oxide
Handle: G10
Blade Length: 85.9mm.
Blade thickness: 3.1mm.
Length closed: 116mm.
Total length: 203mm.
Weight: 110g.
Closure: Liner Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Jim Hammond - Assisted opening via Carson Flipper system and IKBS ball bearing movementC2606 -
CRKT - Pilar Large - Blackwashed Frame Lock Flipper by Vox - 5315KS - folding knife
Intended use: Sporting
Production type: Industrial
Country of Production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Blackwashed
Handle: Blackwashed stainless steel
Blade length: 67.8mm.
Blade thickness: 3.8mm.
Length closed: 101.5mm.
Total length: 170mm.
Weight: 119g.
Closure: Frame Lock
Clip: Stainless steel, removable
Packaging: Cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315KS -
Maserin - Energy - Titanium Flipper Knife by Sergio Consoli - 406 - knife
Intended use: Collection / Sporting
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel 58/61HRC
Blade finish: satin
Handle: in titanium, with spacers and anodized titanium screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Closed length: 130mm.
Total length: 230mm.
Thickness when closed: 9mm.
Weight: 110g.
Lock: Frame Lock with removable stainless steel flipper
Clip: in anodized titanium, carved from solid
Notes: Opening via Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-406 -
CRKT - Squid Compact by Lucas Burnley - 2485K - knife
This small knife is a big deal. The Squid is known as the perfect knife for everyday use, expertly combining simplicity, usability and performance.
Neither brash nor flashy, it is the humble handyman of the knife world: reliable, solid and extraordinarily capable. Now, renowned designer Lucas Burnley has reworked it into a smaller, nimbler version, the Squid Compact. This reasonably priced folding knife is for everyone.
* Assisted opening: The assisted flipper allows rapid blade opening.
* Smooth opening: The IKBS™ ball bearing system ensures maximum smoothness.
* Easy sharpening: High-carbon stainless steel blade sharpens quickly and easily
* Maximum control: Grooves on the back of the blade to ensure a secure and comfortable grip
* Maximum durability: Stainless steel handle withstands heavy use.
* Low profile: Pocket clip ensures safe carrying
* Accessory options: Hole for lanyard or key ring
Intended Use: EDC
Production type: Industrial
Country of manufacture: China
Blade: Stainless steel 8Cr13MoV
Blade Finish: BlackWashed
Handle: BlackWashed stainless steel
Blade Length: 44mm.
Blade thickness: 2.6mm.
Length closed: 74mm.
Total length: 118mm.
Weight: 79g.
Closure: Frame Lock
Clip: stainless steel, removable
Packaging: cardboard box with CRKT logos
Notes: Design by Lucas Burnley - IKBS opening system on pinball-type bearings, spring preload assistedC2485K -
CRKT - CEO MicroFlipper Sheepfoot by Rogers - 7083 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 56mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 140mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7083 -
CRKT - CEO MicroFlipper Drop Point by Rogers - 7081 - knife
The smaller version of the popular CEO folding knife, the Microflipper combines refined style with maximum practicality. It may be small, but it's a serious contender for any job thanks to its lightweight aluminum handle and razor-sharp blade made of Sandvik 12C27™ steel.
This stylish pocket knife is available in two versions: drop-point blade with silver aluminum handle and blue coating, or sheepfoot blade with blue aluminum handle and silver coating.
* Superior performance: Sandvik 12C27™ steel for excellent edge retention.
* Smooth opening: IKBS™ ball-bearing motion allows smooth blade opening.
* Fast opening: Flipper opening system deploys the blade quickly.
* Sturdy and lightweight: Aluminum handle combines strength and minimal weight
* Easy closing: The blade can be easily closed with one hand.
* Carrying options: Adjustable ambidextrous clip for carrying in left or right pocket
Intended Use: EDC / Sporting
Production Type: Industrial
Country of Production: China
Blade: Sandivk 12C27 stainless steel
Blade Finish: Satin finish
Handle: Aluminum
Blade length: 60mm.
Blade thickness: 2.2mm.
Length closed: 82mm.
Total length: 143mm.
Weight: 48g.
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearingsC7081 -
CRKT - Carson M16-13DSFG Tan Special Forces - PRIVATE COLLECTION - pocket knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition.
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: A couple of small marks on Tan-colored finish, unnoticeable
* Marks on handle: None
* Box: Present
* Scabbard: /
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory
Intended Use: Sporting/TacticalProduction Type: Industrial
Country of Production: China
Blade: Stainless steel AUS-8
Blade Finish: Tan Oxide
Handle: PVD steel folders with G10 Tan grips
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 140mm.
Total length: 240mm.
Weight: 150g.
Opening: Carson Flipper system
Closure: Liner Lock with auto LAWKS security system
Clip: multi-position, removable, Black Oxide stainless steel
Packaging: cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemM16-13DSFG-CP -
CRKT - Carson M16-03BK - Bronze & Black Oxide - knife
Intended Use: Sporting / Tactical
Production Type: Industrial
Country of Production: China
Blade: Stainless steel 12C27 Sandvik
Blade treatment: Black Oxide
Handle: Stainless steel 2CR13 with nitriding in Bronze
Blade Length: 90mm.
Blade thickness: 3mm.
Length closed: 118mm.
Total length: 209mm.
Weight: 108g.
Opening: Carson Flipper system
Closure: Frame Lock
Clip: Multi-position, removable, in Black Oxide stainless steel
Package: Cardboard box with CRKT logos
Notes: Design by Kit Carson - Carson Flipper opening systemCM16-03BK -
Maserin - Solar - Titanium Flipper by Sergio Consoli - 405 - knife
Intended use: Collection / Sporting
Production type: industrial
Country of production: Italy
Blade: steel D2 58/61HRC
Blade finishing: satin finish
Handle: titanium, with anodized titanium spacers and screws
Blade length: 105mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thickness when closed: 9mm.
Weight: 130g.
Closure: Frame Lock with removable stainless steel clapper.
Clip: Anodized titanium, billet machined
Notes: Opening by Carson flipper system - Opening movement on ball bearings - Design by Sergio ConsoliMA-405 -
Maserin - Ghost knife - Black G10 - 640 / G10N - knife
The collaboration with Alessandro Zanin continues who has thought of a special knife, Gost Tactical Folder. A light but robust folder, suitable for any use, but with a particular vocation for the CQB - CQC.
The use of the best materials guarantees excellent handling and agility, the excellent balance and the ergonomic study of the handle give an ideal grip with every grip.
The powerful blade instills safety and strength. Finally the knife adjusts to the hand and not vice versa, thus allowing movement and fluidity.Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: N690Co 58HRC stainless steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 85mm.
Blade thickness: 3.2mm.
Closed length: 140mm.
Total length: 220mm.
Thick when closed: 16.4mm.
Weight: 225g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: in stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Alessandro ZaninMA-640/G10N -
Maserin - Artiglio Flipper Knife - OD Green G10 - 420/G10V - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10V -
Maserin - Artiglio Flipper Knife - Grey G10 - 420/G10G - Knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo Toncelli420/G10G -
Maserin - Artiglio Flipper - Black G10 - 420/G10N - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: Italy
Blade: in D2 steel
Blade treatment: Stonewashed
Handle: G10
Blade length: 100mm.
Blade thickness: 3.2mm.
Closed length: 130mm.
Total length: 223mm.
Thick when closed: 16.4mm.
Weight: 154g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: stainless steel, removable and reversible
Packaging: Cardboard box with Maserin logos
Notes: Design by Giacomo ToncelliMA-420/G10N -
CRKT - Pilar Large by Vox - 5315G - folding knife
Destination of use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade treatment: Satin
Handle: Stainless Steel
Blade length: 67mm.
Blade thickness: 4mm.
Length closed: 110mm.
Total length: 170mm.
Weight: 98g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Jesper VoxnaesC5315G -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-B -
EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORG -
CRKT - Ken Onion Hootenanny - K300KXP - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Stainless steel 2Cr13 and grips FRN
Blade length: 85mm.
Blade thickness: 3.5mm.
Length closed: 116mm.
Overall length: 201mm.
Thick when closed: -
Balancing: -
Weight: 136g.
Closure: Frame Lock Stainless Steel 2Cr13
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design Ken Onion, opening system with ball bearing type IKBS opening type Carson FlipperCK300KXP -
CRKT - Carson M16-12ZLEK Law Enforcement Zytel Folding Tanto - knife
Blade: Stainless steel AUS-8 high-carbon 57 / 58HRC Teflon
Handle: Zytel Grips
Blade length: 76 mm.
Blade thickness: 3 mm.
Overall length: 185 mm.
Weight: 102 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: equipped with safety locks and AutoLAWKS guard Carson Flipper tagliacinture with integrated rear window breakerCM16-12ZLEK -
CRKT - M16-04Z by Kit Carson - knife
Intended use: Sport
Type of production: Industrial
Production Blade: Taiwan
Blade: AUS-8 stainless steel
Treatment Lama: -
Handle: Zytel
Blade length: 94mm.
Blade thickness: 3.5mm.
Closed Length: 134mm.
Total length: 230mm.
Thick when closed: 17mm.
Balance: -
Weight: 182g.
Lock: Liner Lock locking system with self-LAWKS
Clip: Stainless Steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: -CM16-04Z -
CRKT - Carson M16-14SFG - Special Forces Big Dog G10 knife
Intended use: Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr14MoV to 58-60 HRC
Blade treatment: Ti-Ni
Handle: G-10
Blade length: 100mm.
Blade thickness: 3.5mm.
Length closed: 135mm.
Total length: 235mm.
Thick when closed: 17mm.
Balancing: -
Weight: 180g.
Closure: Liner Lock with auto-LAWKS locking system
Clip: stainless steel
Sheath: -
Packaging: cardboard box with CRKT logos
Note: -CM16-14SFG -
CRKT - Ripple Black Liner Lock by Ken Onion - K415KXP - Coltello
Destinazione d'uso: Sportivo / EDC
Tipo di produzione: Industriale
Paese di produzione: China
Lama: In acciaio inox 8Cr14MoV
Finitura lama: Satinatura
Manicatura: Alluminio Aeronautico
Lunghezza lama: 80mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: 110mm.
Lunghezza totale: 185mm.
Spessore da chiuso: 8mm.
Peso: 66g.
Chiusura: Liner Lock
Clip: amovibile, in acciaio inox
Confezione: scatola in cartone con loghi CRKT
Note: Versione First Production Run - Sistema di apertura IKBS (Ikoma Korth Bearing System) su cuscinetti a sfera - Design by Ken Onion3803 -
CRKT - Carson knife M21-14SFG - Special Forces - knife
Intended use: Tactical/Military
Blade: AUS-8 56/58HRC stainless steel
Taiwan blade production
Handle: Aluminum
Blade length: 100mm.
Blade thickness: 3.5mm.
Closed length: 135mm.
Total length: 235mm.
Balancing: -
Weight: 155g.
Closure: Liner Lock
Clip: removable and reversible in stainless steel
Scabbard: -
Notes: design by Carson - AutoLAWKS safety catchM21-14SFG -
CRKT - First Strike - Large Tactical Knife 2706 Tanto - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: in excellent condition
* Commercially available: No
* Sharpening: Original
* Marks on blade: NO
* Signs on handle: NO
* Packaging: NO
* Sheath: in plastic material
* Manuals, Certificates and Guarantees: NO
* Checked and Certified by our internal laboratory
Blade: AUS-8 high-carbon 57/58HRC stainless steel
Handle: in cotton with stingray skin insert
Blade length: 140mm.
Blade thickness: 5mm.
Total length: 290mm.
Weight: 322g.
Sheath: plastic material
Note:CRKT-AP-2706 -
CRKT - IBI Flipper Karambit Kubotan by Vox - 7097 - knife
Intended Use: Tactical / Self Defense Tool / Sporting
Production type: Industrial
Country of Production: China
Blade: D2 steel
Blade Finish: Blackwash
Handle: G-10 with stainless steel liners and copper spacer/karambit ring
Blade length: 68mm.
Blade thickness: 2.9mm.
Length closed: 122mm.
Total length: 190mm.
Weight: 79g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Jesper Voxnaes - Carson Flipper opening system on IKBS ball bearings - Designed for personal defense, when closed it can be used as a karambit and as a kubotan.C7150 -
CRKT - CEO Flipper by Rogers - 7097 - knife
Intended Use: Sporting
Production type: Industrial
Country of Production: Taiwan
Blade: Stainless steel AUS-8 58/60 HRC
Blade Finish: Satin finish
Handle: FRN (Fiberglass Reinforced Nylon) with stainless steel liners
Blade length: 85mm.
Blade thickness: 2.3mm.
Length closed: 110mm.
Total length: 195mm.
Weight: 54g.
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Package: Cardboard box with CRKT logos
Notes: Design by Richard Rogers - Carson Flipper opening system on IKBS ball bearings - New 2021 version of the CEO 7096 model, winner of the Blade Show 2019 as "Best Buy Of The Year".C7097 -
CRKT - Carson M16 knife EDC Frame Lock - M16-10KSF - knife
Intended use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: 8Cr13Mov 58/60 HRC stainless steel
Blade treatment: Black Oxide
Handle: 2CR13 stainless steel
Blade length: 75mm.
Length closed: 102mm.
Total length: 180mm.
Weight: 82g.
Closure: Frame Lock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with CRKT logos
Notes: Design by Kit CarsonCM16-10KSF -
Maserin - Reactor knife - Blue G10 - Design by Nicolai Lilin - 681 / G10B - knife
Nicolai Lilin, a Russian writer, of Siberian origin, designed Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped merchantile ship that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.
Intended use: sports collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai Lilin681/G10B -
Maserin - Reactor knife - Brown G10 - Design by Nicolai Lilin - 681 / G10M - knife
Nicolai Lilin, a Russian writer, of Siberian origin, designed Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped merchantile ship that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.
Intended use: sports collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai LilinMA-681/G10M -
Maserin - Reactor knife - Green G10 - Design by Nicolai Lilin - 681 / G10V - knife
Nicolai Lilin, a Russian writer, of Siberian origin, designed Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped merchantile ship that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.
Intended use: sports collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai LilinMA-681/G10V -
Maserin - Reactor knife - Black G10 - Design by Nicolai Lilin - 681 / G10N - knife
Nicolai Lilin, a Russian writer, of Siberian origin, designed Reactor in memory of the operation of the Russian navy special forces in 2010, near the coast of Somalia, when in 22 minutes two operational corps of the marines rescued from the pirates a kidnapped merchantile ship that was carrying oil. On that occasion the militaries could not use firearms to prevent the ship from exploding, so they only used knives. They caught 30 terrorists in 22 minutes. It was a unique operation in the history of international special departments. Reactor is dedicated to all special forces that use white weapons.
Intended use: sports collection
Type of production: industrial
Country of production: Italy
Blade: in D2 steel
Surface treatment: stonewashed
Handle: titanium frame with G10 handle
Blade length: 100mm.
Blade thickness: 4mm.
Closed length: 135mm.
Total length: 243mm.
Closed thickness: 14mm.
Weight: 154g.
Closure: Framelock with removable stainless steel leaf
Clip: removable and reversible, in stainless steel
Sheath: -
Notes: Opening through Carson flipper system - Opening movement on ball bearings - Design by Nicolai LilinMA-681/G10N -
EOS Elite Outfitting Solutions - Prawn Black Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-B -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Tanto - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Tanto Carbon/Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORBG -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SQGBB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQG -
EOS Elite Outfitting Solutions - Squid - Blue Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQB -
Maserin - AM3 - Orange G10 - Design by Attilio Morotti - 377/G10A - knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Satin
Handle: G10
Blade Length: 75mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total Length: 172mm.
Closure thickness: 12mm.
Balance: -
Weight: 78g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: Anodized, removable titanium
Sheath: -
Packing: Cardboard box with Maserin logos
Notes: Design by Attilio MorottiM377-G10A -
Maserin - AM3 - Coyote G10 - Design by Attilio Morotti - 377/G10CY - knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Satin
Handle: G10
Blade Length: 75mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total Length: 172mm.
Closure thickness: 12mm.
Balance: -
Weight: 78g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: Anodized, removable titanium
Sheath: -
Packing: Cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-377/G10CY -
Maserin - AM3 - Black G10 - Design by Attilio Morotti - 377/G10N - knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Satin
Handle: G10
Blade Length: 75mm.
Blade thickness: 3mm.
Closed length: 110mm.
Total Length: 172mm.
Closure thickness: 12mm.
Balance: -
Weight: 78g.
Opening: Carson Flipper system
Washers: in steel, with ball bearings
Closure: Liner Lock
Clip: Anodized, removable titanium
Sheath: -
Packing: Cardboard box with Maserin logos
Notes: Design by Attilio MorottiMA-377/G10N -
Maserin - Pitbull - Silver - Design by Sergio Consoli - 404/A - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliMA-404A -
Maserin - Pitbull - Blue - Design by Sergio Consoli - 404/B - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Closure: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404B -
Maserin - Pitbull - Black - Design by Sergio Consoli - 404/N - knife
Purpose of use: Sportsman
Type of production: industrial
Country of production: Italy
Blade: stainless steel M390
Blade Treatment: Stonewashed
Handle: Aluminum
Blade Length: 95mm.
Blade thickness: 3.5mm.
Closed length: 133mm.
Total length: 225 mm.
Closed thickness: 13mm.
Weight: 158g.
Opening: Carson Flipper system
Washers: Steel, ball bearings
Locking system: Liner Lock
Clip: Stainless steel, removable and reversible
Sheath: cordura
Packing: Cardboard box with Maserin logos
Notes: Skull Crasher on the Shank - Design by Sergio ConsoliM-404N -
CRKT - Carson M21 EDC Frame Lock - M21-10KSF - knife
Use: Tactical / Sports
Type of production: Industrial
Country of production: China
Blade: Stainless steel 8Cr13Mov 58/60 HRC
Blade Treatment: Black Oxide
Handle: Stainless steel 2CR13
Blade length: 79mm.
Blade thickness: 2.4mm.
Closed Length: 102mm.
Overall length: 182mm.
Weight: 79g.
Closure: Framelock
Clip: stainless steel, removable and reversible
Packaging: cardboard box with logos CRKT
Notes: Design by Kit CarsonCM21-10KSF -
CRKT - Ken Onion Wrinkle 2 - K200BXP - knife
Intended use: Sports / EDC
Type of production: Industrial
Production Country: Taiwan
Blade: Stainless steel AUS-8 to 57 / 59HRC
Blade treatment: Satin
Handle: Anodized aluminum with aged effect
Blade length: 65mm.
Blade thickness: 3mm.
Closed Length: 100mm.
Overall length: 165mm.
Weight: 96g.
Lock: Liner Lock
Clip: removable, stainless steel
Packaging: cardboard box with CRKT logos - Design by Ken Onion - opening system on IKBS type ball bearings with open type Carson FlipperCK200BXP -
Maserin - Police - Coyote G10 - Design by Nicolai Lilin - 680/G10CY - knife
Intended use: sports
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Surface treatment: stonewashed
Handle: titanium frame with grip plate in G10
Blade length: 97mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 229mm.
closed Thickness: 14mm.
Weight: 178g.
Closing: Framelock with removable hinged stainless steel
Clip: removable, stainless steel
Sheath: Black Nylon
Notes: Opening via Carson flipper system - Opening Movement on ball bearings - Design by Nicolai LilinMA-680/G10CY -
Maserin - Police - Green G10 - Design by Nicolai Lilin - 680/G10V - knife
Intended use: sports
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Surface treatment: stonewashed
Handle: titanium frame with grip plate in G10
Blade length: 97mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 229mm.
closed Thickness: 14mm.
Weight: 178g.
Closing: Framelock with removable hinged stainless steel
Clip: removable, stainless steel
Sheath: Black Nylon
Notes: Opening via Carson flipper system - Opening Movement on ball bearings - Design by Nicolai LilinMA-680/G10V -
Maserin - AM-2 - Carbon Fiber - Design by Attilio Morotti - 378/CN - knife
Intended Use: sport / collection
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Surface treatment: satin finish
Handle: Carbon Fiber
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 130mm.
Overall length: 210mm.
Thick when closed: 14mm.
Weight: 158g.
Lock: Liner Lock
Clip: Carbon Fiber
Sheath: Nylon
Notes: Opening via Carson flipper system - Opening Movement on ball bearings - Design by Attilio "Atti" MorottiMA-378/CN -
Maserin - AM-2 - Pao Santo - Design by Attilio Morotti - 378/SA - knife
Intended Use: sport / collection
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Surface treatment: satin finish
Handle: Santo Pao wood
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 130mm.
Overall length: 210mm.
Thick when closed: 14mm.
Weight: 158g.
Lock: Liner Lock
Clip: Carbon Fiber
Sheath: Nylon
Notes: Opening via Carson flipper system - Opening Movement on ball bearings - Design by Attilio "Atti" MorottiMA-378/SA -
Maserin - Police - Black G10 - Design by Nicolai Lilin - 680/G10N - knife
Intended use: sports
Type of production: Industrial
Production Country: Italy
Blade: stainless steel N690Co
Surface treatment: stonewashed
Handle: titanium frame with grip plate in G10
Blade length: 97mm.
Blade thickness: 4mm.
Closed Length: 135mm.
Overall length: 229mm.
closed Thickness: 14mm.
Weight: 178g.
Closing: Framelock with removable hinged stainless steel
Clip: removable, stainless steel
Sheath: Black Nylon
Notes: Opening via Carson flipper system - Opening Movement on ball bearings - Design by Nicolai LilinMA-680/G10N -
CRKT - No Time Off by Flavio Ikoma - NoTimeOff - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel CTS BD-1 to 57 / 59HRC
Blade treatment: Satin
Handle: FRN with stainless steel liners
Blade length: 76mm.
Blade thickness: 4mm.
Length closed: 108mm.
Overall length: 184mm.
Thick when closed: -
Balancing: -
Weight: 167g.
Lock: Liner Lock with security system ILS Ikoma Lock Safety
Clips: stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Flavio Ikoma, opening system with ball bearing type IKBS opening type Carson FlipperC5350 -
CRKT - Brian Tighe Rade - 5290 - knife
Intended use: Sports
Type of production: Industrial
Production Lama: China
Blade: Stainless steel 8Cr13MoV
Treatment Lama: Satin
Handle: Aluminium 6061 T6 aircraft
Blade length: 86mm.
Blade thickness: 3mm.
Length closed: 115mm.
Overall length: 200mm.
Thick when closed: -
Balancing: -
Weight: 127g.
Closure: Button Lock
Clip: removable, stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT, Design by Brian Tighe, opening system with ball bearing type IKBS opening type Carson FlipperC5290 -
Maserin - AM1 Tech Frame Flipper - Santos Wood - Design by Atti - 382/SA - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel S35VN
Treatment Blade: satin
Handle: titanium, with santos wood insert
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: -mm.
Balancing: -
Weight: 130g.
Closure: Frame Lock
Clip: carbon fiber
Sheath: -
Note: Carson flipper opening system - ball bearings - Design by Attilio "Atti" Morotti12318 -
Maserin - AM1 Tech Frame Flipper - Olive Wood - Design by Atti - 382/OL - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel S35VN
Treatment Blade: satin
Handle: titanium, with olive wood insert
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: 124mm.
Overall length: 216mm.
Thick when closed: -mm.
Balancing: -
Weight: 130g.
Closure: Frame Lock
Clip: carbon fiber
Sheath: -
Note: Carson flipper opening system - ball bearings - Design by Attilio "Atti" MorottiMA-382/OL -
Maserin - AM1 Tech Frame Flipper - Design by Atti - 382/CN - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel S35VN
Treatment Blade: satin
Handle: titanium, carbon fiber with insert
Blade length: 95mm.
Blade Thickness: 4mm.
Length closed: -mm.
Overall length: 216mm.
Thick when closed: -mm.
Balancing: -
Weight: 130g.
Closure: Frame Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Attilio "Atti" MorottiMA-382/CN -
Maserin - Bulldog Flipper - Design by Sergio Consoli - 403 - knife
Intended Use: sports
Type of production: Industrial
Production Lama: Italy
Blade: stainless steel N690Co
Treatment Blade: satin
Handle: titanium, with spacers G10
Blade length: 97mm.
Blade Thickness: 4.5mm.
Length closed: -mm.
Overall length: 220mm.
Thick when closed: -mm.
Balancing: -
Weight: 216g.
Lock: Liner Lock
Clip: carbon fiber
Sheath: -
Note: Opening the system through Carson flipper - Movement opening on ball bearings - Design by Sergio ConsoliMA-403 -
CRKT - Plain Hammond Cruiser - 7904 - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Blade Production: China
Blade: Stainless steel 8Cr14MoV 55 / 57HRC
Blade treatment: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Closed Length: 131mm.
Overall length: 225mm.
Thick when closed: -
Balancing: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7904 -
CRKT - Hammond Cruiser OD Green - 7904DKG - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7904DKG -
CRKT - Carajas by Ikoma - 5340 - Knife
Intended Use: Sport / EDC
Type of production: Industrial
Production Lama: China
Blade: Sandvik 12C27 stainless steel 59/61 HRC
Treatment Blade: -
Handle: Black G-10
Blade length: 79mm.
Blade thickness: 2.5mm.
Closed Length: 109mm.
Overall length: 187mm.
Thickness when folded: 9mm.
Balancing: -
Weight: 85g.
Lock: Liner Lock
Clip: removable stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: Opening system IKBS (Ikoma Korth Bearing System) on ball bearings - Design by Flavio Ikoma10950 -
CRKT - Hammond Desert Cruiser - 7914DIN - knife
Intended Use: Sport / Tactical
Type of production: Industrial
Production Lama: China
Blade: 8Cr14MoV stainless steel 55/57HRC
Treatment Lama: -
Handle: Zytel
Blade length: 95mm.
Blade thickness: 3.5mm.
Length closed: 131mm.
Total length: 225mm.
Thick when closed: -
Balance: -
Weight: 173g.
Lock: Liner Lock with secure additional LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKTC7914DI -
CRKT - Carson M16-14ZLEK Law Enforcement Zytel Folding Tanto - knife
The CRKT M16-14ZLEK Big Dog Law Enforcement knife is a Kit Carson design that is built for professional use. The black Zytel InterFrame handle has 420J2 stainless steel liners and CRKT's AutoLAWKS knife safety, which automatically actuates when the blade is open making it a virtual fixed blade. First responders will appreciate the integrated tungsten carbide window breaker and seat belt cutter. The pocket clip is 4-way reversible for every possible carry type, but not designed for tip-up in-pocket carry.
The Carson M16-14ZLEK features a black finished Tanto blade with a partially serrated cutting edge. The blade is easily opened with the dual thumb studs or a push of the Carson Flipper, which has an integrated seat belt cutter.
Specifications:
Overall Length: 9.25"
Blade Length: 3.75"
Blade Thickness: .14"
Blade Steel: AUS 8, HRC 55-57
Grind: Hollow
Handle Material: Zytel
Closed Length: 5.5"
Weight: 6.2 oz.
Made in TaiwanCM16-14ZLEK -
CRKT - Carson M16-13ZM Desert Camo - knife
CRKT M16-13 Desert Spear Point Folding Knife M16-13ZM has been developed specifically to blend into the desert environment. This CRKT knife features the super rigid InterFrame build with 420J2 stainless steel liners, threaded stainless steel back spacers, and Desert Camo pattern glass filled nylon scales. The spear point blade of the knife is non-reflective bead-blast finished AUS 4 stainless steel, crafted into a partially serrated combo edge that blends and almost disappears in the desert. The Columbia River M16-13 Desert Combo Edge Folder Knife is ideal when weight and bulk must be kept to a minimum, and it comes with a removable, single position clothing/gear clip for easier carrying. It also features Columbia River Knife & Tool's exclusive patented AutoLAWKS safety, which automatically turns the folder into a fixed blade when the blade is opened and locked. One-hand opening and closing is quick and smooth, the result of precision tolerances and lubrous washers at the blade pivot, and the dual ambidextrous thumb studs with checkered surfaces provide instant access in any circumstance. For a folding blade knife that's at home in the desert, choose the Columbia River Knife & Tool M16-13 Desert Camo Nylon Handle Folding Knife.
Knife Type: Folding Application: Tactical, utility Open Length: 8.25" Closed Length: 4.75" Weight: 3.5 oz Blade Length: 3.5" Blade Thickness: 0.1" Blade Material: AUS 4 stainless steel Blade Hardness: 55-57 HRC Blade Finish: Bead Blast Blade Grind: Hollow Blade Type: Spear point Blade Edge: Combo w/ triple-point serrations Handle Material: Glass-filled nylon Handle Finish: Desert Camo Liner Material: 420J2 Locking Mechanism: Locking liner Safety Mechanism: AutoLAWKS Pocket Clip: Yes, 1-position Additional Features: Carson Flipper M16-13ZM -
CRKT - Carson M21-12G TiNi G10 - knife
Intended Use: Tactical / Sports
Type of production: Industrial
Production Lama: China
Blade: stainless steel 8Cr14, 58-59 HRC
Treatment Blade: Titanium Nitride
Handle material: G10
Blade length: 76mm.
Blade thickness: 3mm.
Closed Length: 108mm.
Total length: 184mm.
Weight: 108g.
Lock: Liner Lock with Auto-closure LAWKS
Clip: removable and reversible stainless steel
Sheath: -
Packaging: cardboard box with logos CRKT
Notes: design by Kit CarsonM21-02GL -
Maserin - Revolt by Moris Baroni - 699 - knife
Maserin - Revolt by Moris Baroni - 699 - knife
Intended Use: Tactical
Type of production: Industrial
Production Blade: Italy
Blade: Stainless steel N690Co
Treatment Blade: Ti-Ni Titanium Nitride
Handle material: G10 with steel liners
Blade length: 100mm.
Blade thickness: 5mm.
Length closed: 135mm.
Total length: 240mm.
Thick when closed: -
Balance: -
Weight: 250g.
Lock: Liner Lock
Clip: Removable and reversible, stainless steel
Sheath: -
Packaging: Cardboard box with logos Maserin
Notes: Design by Moris Baroni - Skull crasher stainless steel10022 -
CRKT - Carson M16-13 ZLEK - knife
Blade: AUS-8 stainless steel high-carbon Teflon 57/58HRC
Handle: Handle: Zytel
Blade length: 84 mm.
Blade Thickness: 2.5 mm.
Total length: 200 mm.
Weight: 110 g.
Lock: Liner Lock
Clip: Stainless Steel
Notes: Equipped with safety lock and guard LAWKS "Carson Flipper" - glass breakingCM16-13ZLEK