Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Rockstead - HIGO II X-FCF - ZDP-189 & Dark Matter Gold Carbon Fiber - folding knife
Higo is one of the most beloved models for Rockstead Knives fans around the world, and HIGOⅡX, with a custom Dark Matter Gold (DMG) carbon fiber coating and a titanium back layer, is one more step in the pursuit of perfection. The blade is made of ZDP189 super stainless steel and features a unique convexity with gradually reduced angle (30 degrees at the middle and 24 degrees at the tip). The variable blade angle is the result of Rockstead's long quest for superior sharpness and cutting ability.
Blade: ZDP-189 stainless steel at 66.7HRC
Handle: anodized titanium and Dark Matter Gold carbon fiber
Blade length: 89mm.
Blade thickness: 3.2mm.
Total length: 216mm.
Weight: 138g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Accompanied by warranty certificate with full technical specificationsRO-HIGIIX-ZDPDMG -
Rockstead - 2010 Higo-MH-DLC Serial #303 - YXR7 HPC & Micarta - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In very good condition
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: -
* Marks on handle: - -
* Box: marketed in silk pouch.
* Scabbard: Leather, belt, original, with a few small marks given by time.
* Manuals, Certificates and Warranties: present.
* Checked and Certified by our in-house laboratory
The HIGO-MH-DLC folder features a 3.5-inch YXR7 blade with DLC coating and Micarta handle. The incredible mirror finish is achieved by heat treating the blade and gradually grinding by hand with wet and dry sandpaper of 400, 600, 800, 1,200 and 2,000. The HIGO-MH-DLC comes with a black leather belt case with a slot to hold the included torx wrench.
Country of manufacture: Japan
Type of manufacture: midtech
Blade: DLT571 steel (Hitachi YXR7 at 64.1HRC with 3micron HPC coating and hardness of Hv1300)
Handle: 2mm stainless steel sus402J2 at 52HRC with micarta handles
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 216mm.
Weight: 139g.
Closure: Liner Lock
Clip: stainless steel
Notes: Serial number 303 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HIMHDLC-CP -
Rockstead - 2010 Higo-ST Serial #005 - YR7 HPC & Duralumin - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: Like new
* Commercially available Discontinued
* Sharpening: Factory
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our in-house laboratory.
The best industrial knives currently in production are marketed under the Rockstead brand. Created by Katsumi Kitano, who has been making quality knives for more than 20 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in the level of innovation for the materials used and construction techniques.
Country of production: Japan
Type of production: midtech
Blade: Hitachi YXR7 steel at 64.8HRC with 3micron HPC coverage and hardness of Hv1800
Handle: Duralumin A2024 with surface anodizing and hardness of Hv400
Blade length: 90mm.
Blade thickness: 3.5mm.
Total length: 215mm.
Weight: 130g.
Closure: Frame Lock with SKD11 casement at 61HRC
Clip: made of 402J2 steel at 48HRC
Notes: Serial number 005 - 2010 knife accompanied by warranty certificate with technical specifications - Model discontinued and no longer commercially availableRO-HISTHPC-CP -
Rockstead - CHI ZDP - Shinogi Zukuri Clad Steel SanMai ZDP189 - knife made in Japan
Under the brand name Rockstead, from Ishida Co. in Sakai, Japan, the best industrial knives currently in production are currently marketed: created by Katsumi Kitano, who has been making quality knives for over 30 years to the extent that he has been awarded the highest distinction among artisan knife makers in Japan, they prove to be exceptional both in cutting ability, penetration and edge-holding and in innovation in the materials used and construction techniques.
Intended Use: Collection/Sportsman
Type of production: Midtech
Country of manufacture: Sakai - Japan
Blade: rolled stainless steel ZDP189 at 66.4 HRC on the inside and VG10 at 61.3 HRC on the outer cheeks
Blade treatment: mirror polish
Handle: Aluminum A6063S with anodization to Hv400 hardness and genuine Breed leather inserts
Blade length: 82mm.
Blade thickness: 3.7mm.
Length closed: 111mm.
Total length: 189mm.
Thickness when closed: 16.2mm.
Weight: 133g.
Opening: via ambidextrous pin
Washers: steel
Closure: Sub FrameLock of 2mm. made of SUS402J2 stainless steel at 50HRC
Clip: deep pocket, 1mm. 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certificate with serial number and steel hardness test
Notes: Shinogi Zukuri type blade sharpeningR-CHIZDP -
Rick Hinderer Knives - XM-24 - Spearpoint 4.0" - Bronze Ti Custom Set - Coltello
Intended use: Tactical / Collection
Type of production: Midtech
Country of production: USA
Blade: CPM-S35VN 61 / 62HRC stainless steel
Blade treatment: stonewashed
Handle: titanium and G10
Blade length: 101mm.
Blade thickness: 4.6mm.
Closed Length: 138mm.
Total length: 234mm.
Weight: 220g.
Closure: FrameLock
Clip: titanium, removable
Notes: custom version with screws and accessories in anodized bronze titanium
Additions compared to the standard model:
* Pivot screw in bronzed titanium
* 3 front screws in bronzed titanium
* 3 spacers in bronzed titanium
* Rear stabilizer lockbar in bronzed titanium
* Clip in bronzed titanium
* Clip cover in bronzed titaniumXM24TIB -
Rockstead - Higo II X-CF-ZDP - Carbon Fiber ZDP-189 - knife
With the Rockstead brand of Ishida Co. of Sakai, Japan, the best industrial knives currently in production are currently marketed.
Created by Katsumi Kitano, who for over 20 years has been producing quality knives so as to have been awarded the highest recognition among artisan knives in Japan, they are exceptional both in cutting capacity, penetration and hold of the thread and in innovation for the materials used and for construction techniques.
Intended use: Collection / SportsType of production: Midtech
Country of production: Sakai - Japan
Blade: ZDP189 stainless steel hardened to 66.4HRC
Blade treatment: mirror polished
Handle: anodised titanium and carbon fiber
Blade length: 89mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 216mm.
Thick when closed: 15.8mm.
Weight: 133g.
Opening: through ambidextrous pin
Washers: in steel
Closure: FrameLock with wing in SKD11 at 61HRC
Clip: removable, in 420J2 stainless steel with PVD treatment
Packaging: Wooden box with Rockstead logos, certified with serial number and steel hardness test
Notes: Serial number # 028 - Date of production April 23, 2019HIGOIIXCF -
Rockstead - Chou HPC Ironwood - Neck Knife - Knife
With Rockstead brand of Ishida Co. Sakai, Japan, they are currently marketed with the best industrial knives currently in production.
Created by Katsumi Kitano, who for 20 years has been producing quality knives so much to have been awarded the highest award among the knife craftsmen in Japan, you demonstrate exceptional both in cutting capacity, penetration and tightness of the wire both in terms of innovation for and materials used for the construction techniques.
Use: utility / Neck KnifeProduction Country: Japan
Blade: stainless Hitachi YXR7 to 65HRC
Finish: HPC titanium
Handle: Ironwood
Blade length: 45 mm.
Blade thickness: 4 mm.
Overall length: 120 mm.
Weight: 60 g.
Sheath: neck, Kydex thermoformed
Notes: Accompanied by a certificate of guarantee with technical specifications4069IW -
Hinderer Knives - XM-24 - Custom Grind Slicer - Carbon Fiber with Anodized Titanium - custom knife
Intended use: Tactical / Collection
Type of production: custom
Country of Origin: USA
Blade: handcrafted by Rick Hinderer, CPM-S35VN 61 / 62HRC stainless steel, with double concave beveling
Blade treatment: Hand satin
Handle: grip plate in the liner thickness of titanium 1mm 6AL4V 3.5mm carbon fiber with blue anodizing. Frame titanium blue anodized 6AL4V, billet, thick 4.5mm with Hinderer Lockbar Stabilizer. Spacers and screws 17-4 PH stainless steel
Blade length: 100mm.
Blade thickness: 4.5mm.
Closed Length: 135mm.
Overall length: 233mm.
Thick when closed: 15mm.
Weight: 210g.
Lock: Frame Lock type
Clip: blue anodized titanium
Notes: Lanyard black paracord with titanium wire stop 6AL4V blue anodized, billet, with a diameter of 9mm, custom by Rick Hinderer12479 -
Rockstead - SHUN Titanium ZDP-189 by Sinkevich - knife
Con il marchio Rockstead, della Ishida Co. di Sakai, in Giappone, sono attualmente commercializzati i migliori coltelli industriali attualmente in produzione.
Creati da Katsumi Kitano, che da oltre 20 anni produce coltelli di qualità tanto da esser stato insignito del massimo riconoscimento tra i coltellinai artigiani in Giappone, si dimostrano eccezionali sia in capacità di taglio, penetrazione e tenuta del filo sia a livello di innovazione per i materiali utilizzati e per le tecniche costruttive.
Lama: acciaio laminato con guance esterne in VG10 e tagliente in ZDP-189 a 66/67HRC con finitura a specchio
Manicatura: Titanio anodizzato
Lunghezza lama: 105 mm.
Spessore della lama: 3,8 mm.
Lunghezza totale: 190 mm.
Peso: 159g.
Chiusura: Frame Lock con battente in acciaio inox
Clip: Deep pocket, amovibile, in acciaio inox SUS420J2 a 50HRC
Note: Design by Sinkevich - accompagnato da certificato di garanzia con specifiche tecniche dettagliate12431