Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Helle Norway - Utvaer knife by Vox - PRIVATE COLLECTION - No.600 - knife
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased
* Condition: In good condition
* Commercially available: YES
* Sharpening: re-sharpened by our in-house laboratory
* Marks on blade: YES, has a number of scratches on the blade
* Marks on handle: None
* Box: Present and complete
* Sheath: Leather sheath
* Manuals, Certificates and Warranties: Present
* Checked and Certified by our internal laboratoryIntended use: hunting/hiking
Type of production: semi-artisanal
Blade: 12C27 stainless steel
Handle: Birch
Blade length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balancing: set back 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesAP-HE-600 -
MoraKniv - Basic 546 Limited Edition 2024 - Dala Red & Ivy Green - 14282 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: 12C27 recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414282 -
MoraKniv - Basic 511 Limited Edition 2024 - Ivy Green & Dala Red - 14281 - knife
This year's colors come from the 17th century Mora folk dress, one of Sweden's oldest folk dresses. Here the green fabric meets the classic Dala Red color typical of our knives. Together, they breathe new life into the color combination that once made the people of Mora famous all over the world.
Mora folk dress is still worn by people on special occasions, such as midsummer, weddings or folk music events. Over the years, the dress has undergone few changes and has remained largely the same as it always has. The Mora folk dress and the Morakniv are both worn with pride, in keeping with the tradition established by the ancestors and the heritage that has been developed and cultivated over the years.
The knife, with its ergonomic barrel-shaped polymer handle, features a sturdy finger guard and a 2.0 mm-thick carbon steel blade that provides strength and stability with every cut.
Intended use: hiking / hunting / sportsType of production: industrial
Blade: carbon steel C100
Country of manufacture: Sweden
Handle: thermoplastic
Blade length: 91mm.
Blade thickness: 2mm.
Total length: 206mm.
Weight: 109g.
Scabbard: plastic material
Notes: exclusive, limited edition coloring for the year 202414281 -
MoraKniv - Wit - Black Blade and Ash Wood - 14084 - knife
A reliable, full tang bushcraft knife that can be used in a wide variety of situations during your next long-duration adventure. The ergonomic polished ash wood handle allows for a variety of grips that can be useful. The black recycled Swedish stainless steel blade, with its full curvature and drop point, allows you to get the most out of your experience. The back of the blade is also compatible with a fire starter.
The unique, carefully selected ash wood handle features a functional grip bead and a 2.5 mm thick black blade made of recycled Swedish stainless steel, providing strength and stability with every cut. Thanks to the design of the blade and handle, the knife is well balanced and specially developed for precision work. The black PC coating creates a balanced contrast between the bright ash wood and the polished edge of the blade. The vegetable-tanned leather sheath has a belt loop and protects the cutting edge from surfaces that can dull the knife.
Intended use: hiking / bushcraft / light utility
Type of manufacture: semi-crafted
Blade: full tang, recycled Swedish stainless steel
Country of manufacture: Sweden
Handle: ash wood
Blade length: 103mm.
Blade thickness: 2.5mm.
Total length: 213mm.
Balance: advanced
Weight: 128g.
Sheath: vegetable-tanned leather
Notes: scandi-type sharpeningM14084 -
MoraKniv - Stainless Companion Bushcraft - OD Green - 14065OD - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065OD -
MoraKniv - Stainless Companion Bushcraft - Desert - 14065DE - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065DE -
MoraKniv - Stainless Companion Bushcraft - Black - 14065BK - knife
The Mora Companion has always been known by all as one of the most popular knives in the world of bushcraft, both for its reliability and light weight and for its attractive price. In fact, its low weight and minimal bulk make it the perfect choice for both demanding hikes and simple Sunday outings.
Intended use: hiking / hunting / sports / fishing
Type of production: industrial
Blade: Sandvik 12C27 57/58HRC stainless steel
Country of manufacture: Sweden
Handle: polypropylene with non-slip rubber inserts
Blade length: 104mm.
Blade thickness: 2.5mm.
Total length: 218mm.
Balance: backward
Weight: 116g.
Sheath: polypropylene
Notes: scandi-type sharpeningM14065BK -
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-B -
EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORG -
Helle Norway - Utvaer by Vox - No.600 - knife
Destination: hunting / hiking
Type of production: semi-handicraft
Country of production: Norway
Blade: 12C27 stainless steel
Finishing: mirror polishing
Handle: Birch wood
Blade Length: 102mm.
Blade thickness: 3mm.
Total length: 221mm.
Balance: back to 2.5cm
Weight: 151g.
Sheath: leather
Notes: Design by Jesper VoxnaesHE-600 -
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Helle Norway - Les Stroud Temagami Knife - Knife - No.301
Intended use: huntingType of production: semi-artisan
Blade: carbon steel laminate shirogami with sharp steel 62HRC
Handle: Birch
Blade length: 110mm.
Blade Thickness: 3mm.
Overall length: 230mm.
Balancing: back to 2.5cm
Weight: 154g.
Sheath: Leather
More information: http://www.lesstroud.ca/HE-301 -
Helle Norway - Jegermester - No.42 knife
Intended Use: Hunting
Type of production: industrial
Blade: stainless steel Sandvik 12C27
Treatment Lama: -
Handle: Birch
Blade length: 135mm.
Blade Thickness: 2.5mm.
Length closed: -
Total length: 250mm.
Balance: back to 2.5cm
Weight: 128g.
Closing: -
Clip: -
Sheath: Leather
Notes: -HE-42 -
Helle Norway - Temagami Les Stroud Knife - coltello - No. 1300
Les Stroud was born in Mimico - Ontario in 1961.
Canadian musician, filmmaker and survival expert, Les Stroud is best known as the creator, writer, producer, director, cameraman and star of the television series 'SurvivorMan'.This knife is a collaboration between Les and the famous Norwegian company Helle.
Intended use: hunting
Type of production: semi-crafted
Blade: Sandvik 14C28N steel
Handle: Birch
Blade length: 110mm.
Blade thickness: 3mm.
Total length: 230mm.
Balance: set back 2.5cm
Weight: 143g.
Sheath: leather
More information: http://www.lesstroud.ca/HE-1300 -
MoraKniv - Kansbol knife with Survival Kit - Burnt Orange - outdoor knife
A reliable outdoor knife with integrated lock that can be used in many difficult situations. Designed for the hunter and adventurer, the knife is an excellent choice when you need a safe and robust tool close at hand. The blade is made of Swedish stainless steel and has a long sharpness life.
The ergonomic barrel-shaped polymer handle features a soft non-slip grip, a finger guard and a 2.5 mm thick contoured blade, profiled and made of Swedish stainless steel, which ensures strength and stability in every cut.
Thanks to the design of the blade and the handle, the knife is ideal for working safely and efficiently in various weather conditions during all hunting seasons. The polymer knife sheath is symmetrical meaning it is suitable for both right and left handed users and has a Swedish vegetable tanned leather strap that can be easily attached to a belt. A survival kit with integrated lock, diamond sharpener and reflective paracord is mounted on the sheath of the knife.
Knife series: Kansbol
Knife type: All-round
Area of use: Bushcraft, Hunting, Outdoor
Color: Burnt OrangeSPECIFICATIONS
Blade length: 109mm
Blade thickness: 2.5mm
Knife length: 226mm
Total length: 250mm
Net Weight: 177.1g
Steel Type: Recycled Swedish Stainless SteelCompatibility with the fire starter: Yes
Degree of flexibility: Rigid
Handle material: Thermoplastic rubber
Dexterity: Right, Left
Sheath: in polymer
Sheath Orientation: Left, RightMK-1020 -
Helle Norway - Vintage Fabrikker Norway knife - PRIVATE COLLECTION - knife
KNIFE WITHDRAWAL FROM A PRIVATE COLLECTION
* Type: Previously purchased
* Condition: Overall in excellent condition, it has some marks on the blade from the years
* Available on the market: no longer in production, difficult to find, dating back to the 90s
* Sharpening: Original
* Marks on the blade: small scratches
* Marks on the handle: no
* Box: without box
* Sheath: in brown leather
* Manuals, Certificates and Warranties: absent
* Checked and certified by our internal laboratoryIntended use: hunting
Type of production: industrial
Blade: Sandvik 12C27 stainless steel
Blade treatment: -
Handle: leather discs
Blade length: 150mm.
Blade thickness: 2.5mm.
Closed Length: -
Total length: 270mm.
Balance: set back to 2.5cm
Weight: 220g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-FAB -
EOS Elite Outfitting Solutions - Prawn Black Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-B -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Tanto - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Black - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-BK -
EOS Elite Outfitting Solutions - Prawn Friction Folder Tanto Carbon/Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORBG -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SQGBB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQG -
EOS Elite Outfitting Solutions - Surgeon Titanium - knife
Intended use: Tactical / Collective
Type of production: artisanal seed
Country of Origin: USA
Blade: CTS-XHP stainless steel
Blade Treatment: Black PVD
Grip: Titanium Grade 5
Blade length: 92mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 13.2mm.
Balance: -
Weight: 187g.
Opening: Titanium thumbstood for the righteous
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SUR -
EOS Elite Outfitting Solutions - Squid - Blue Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQB -
Helle Norway - Skala Foldekniv knife - No.212
Intended use: hunting
Type of production: Industrial
blade production: Norway
Blade: 12C27 stainless steel 59HRC
Blade treatment: -
manicatura: cocobolo wood
Blade length: 85mm.
blade thickness: 3mm.
Closed length: 115
Total length: 200mm.
thick when closed: 1.8 cm
Weight: 117g.
Closing: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard box more cloth cotton branded Helle
Notes: -HE-212 -
Helle Norway - Dokka 3L - No.200 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 85mm.
Blade thickness: 3mm.
Length closed: 115
Total length: 200mm.
Thick when closed: 1.8 cm
Weight: 130g.
Closure: back lock
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-200 -
Helle Norway - Dovre - No.170 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla e Corian
Lunghezza lama: 70mm.
Spessore della lama: 3mm.
Lunghezza chiuso: -
Lunghezza totale: 170mm.
Bilanciatura: arretrata a 2.5cm
Peso: 58g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-170 -
Helle Norway - Fjellkniven knife - No.4 knife
Destination of use: hunting
Type of production: industrial
Blade: iin rolled steel with 18/8 stainless steel cheeks and 59HRC stainless steel cutting edge
Blade treatment: -
Handle: Birch
Blade length: 100mm.
Blade thickness: 3mm.
Length closed: -
Total length: 210mm.
Balancing: set back to 2.5cm
Weight: 108g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-4 -
Helle Norway - Harding - No.99 coltello
Destinazione d'uso: caccia/sportivo
Tipo di produzione: industriale
Produzione Lama: Norvegia
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: legno di betulla, palissandro ed anelli di cuoio
Lunghezza lama: 99mm.
Spessore lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 215mm.
Spessore da chiuso: -
Bilanciatura: arretrata, a 1cm.
Peso: 102g.
Chiusura: -
Clip: -
Fodero: in cuoio marrone
Confezione: astuccio cilindrico di cartone più panno in cotone marchiato Helle
Note: -HE-99 -
Helle Norway - Nying - No.55 coltello
Destinazione d'uso: caccia
Tipo di produzione: industriale
Lama: in acciaio laminato con guance inox 18/8 e tagliente inox 59HRC
Trattamento Lama: -
Manicatura: Betulla
Lunghezza lama: 70mm.
Spessore della lama: 2.5mm.
Lunghezza chiuso: -
Lunghezza totale: 165mm.
Bilanciatura: arretrata a 2.5cm
Peso: 82g.
Chiusura: -
Clip: -
Fodero: cuoio
Note: -HE-55 -
Helle Norway - Veidemann - No.53 knife
Intended Use: Hunting
Type of production: industrial
Production Blade: Norway
Blade: rolled steel cheeks with 18/8 stainless steel 59HRC and sharp
Treatment Lama: -
Handle: Birch wood
Blade length: 90mm.
Blade thickness: 3mm.
Length closed: -
Total length: 193mm.
Thick when closed: -
Balance: backward, to 1.5cm.
Weight: 98g.
Closing: -
Clip: -
Sheath: Brown leather
Packaging: cylindrical cardboard case more cotton cloth marked Helle
Notes: -HE-53 -
Helle Norway - Wind knife - No.180 knife
Destination of use: hunting
Type of production: industrial
Blade: in stainless steel with 18/8 stainless steel and 59HRC stainless steel edge
Blade treatment: -
Handle: Birch
Blade length: 80mm.
Blade thickness: 2.5mm.
Length closed: -
Total length: 220mm.
Balancing: set back to 2.5cm
Weight: 96g.
Closure: -
Clip: -
Sheath: leather
Note: -HE-180