Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Blue - knives
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-B -
Bastinelli Knives - Picolomako - Karambit - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 76mm.
Blade thickness: 3mm.
Closed length: -
Overall length: 187mm.
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-05 -
EOS Elite Outfitting Solutions - Orca S - Grey Titanium - knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORG -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Bastinelli Knives - Picoeur Black knife Doug Marcaida - Scalpel Karambit Neck Knife
Destinazione d'uso: Neck Knife
Tipo di produzione: Industriale
Paese di produzione: Maniago, Italia, by Fox Cutlery
Lama: acciaio inox N690Co
Trattamento lama: Black Cerakote
Impugnatura: acciaio inox N690Co
Lunghezza lama: 40mm.
Spessore lama: 3.8mm.
Lunghezza totale: 138mm.
Peso: 30g.
Fodero: Da collo, in Kydex, compatibile con sistemi di aggancio UltiClip (non compresi, acquistabili separatamente)
Confezione: Scatola di cartone con loghi Bastinelli Knives
Note: Prodotto in Italia da Fox CutleryBC-07B -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBC-0618 -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
EOS Elite Outfitting Solutions - Prawn Black Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: black
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-B -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Tanto - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Aluminum Black - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-A-BK -
EOS Elite Outfitting Solutions - Prawn Friction Folder Tanto Carbon/Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL-T -
EOS Elite Outfitting Solutions - Prawn Friction Folder Carbon / Aluminum - knife
Intended use: Tactical / EDC / Collection
Type of production: semi-handmade
Country of production: USA
Blade: CPM S35VN steel
Blade treatment: -
Handle: carbon fiber and aluminum
Blade length: 68mm.
Blade thickness: 4mm.
Length closed: 83mm.
Total length: 135mm.
Thick when closed: 12mm.
balancing:
Weight: 68 gr.
Opening: -
Washers: -
Closure: Friction Folder (without block)
Clip: titanium, removable
Packaging: nylon bag with EOS logos
Note: -EOS-P-CF-AL -
Bastinelli Knives - Safe Folder Frame Lock - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: Titanium Darkwashed
Blade Length: 100mm.
Blade thickness: 3mm.
Closed length: 125mm.
Overall length: 218mm.
Closed thickness: 14mm.
Weight: 160g.
Opening: carson pinball system
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Rear fender - Produced by Lion SteelBA-SAFE -
Bastinelli Knives - RED Dark Stone Washed - knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade treatment: Darkwashed
Handle: G10 and Titanium Darkwashed
Blade Length: 90mm.
Blade thickness: 3mm.
Closed length: 113mm.
Total length: 200mm.
Closed thickness: 13mm.
Weight: 117g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: deep pocket, removable and reversible stainless steel
Packing: Cardboard box with Bastinelli Knives logos
Notes: Glass Breaker - Produced by Lion SteelBA-REDB -
Bastinelli Knives - BBR2 IKBS Frame Lock - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and anodized titanium
Blade Length: 85mm.
Blade thickness: 3.5mm.
Closed length: 115mm.
Total length: 195mm.
Closed thickness: 14mm.
Weight: 99g.
Opening: thumbstood ambidestro
Washers: IKBS system with steel ball bearings
Closure: Framelock
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BBR2 -
Bastinelli Knives - Big Dragotac OD Green - Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: D2 steel
Blade Treatment: Stonewashed
Handle: G10 and Titanium
Blade Length: 120mm.
Blade thickness: 5mm.
Closed length: 160mm.
Total Length: 270mm.
Closed thickness: 14mm.
Weight: 236g.
Opening: removable thumbnail, ambidextrous
Washers: Teflon
Closure: Framelock with additional Rotoblock security system
Clip: Stainless steel removable
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Lion SteelBA-BDRG -
Bastinelli Knives - Mako Folder with Doug Marcaida - Karambit Knife
Intended use: Tactical
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Blackwashed
Handle: G10
Blade Length: 66mm.
Blade thickness: 3mm.
Closed length: 120mm.
Total length: 184mm.
Closed thickness: 15mm.
Weight: 102g.
Opening: Emerson Wave type system
Washers: Brass
Closure: Liner Lock
Clip: Stainless steel removable and reversible
Packing: Cardboard box with Bastinelli Knives logos
Notes: Doug Marcaida and Funker Tactical - Produced by Fox FKMDBA-MAKF -
Bastinelli Knives - Kalinou Karambit - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: Stone Washed
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01 -
Bastinelli Knives - Kalinou Karambit Black - knife
Intended use: Tactical / CQC
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade Treatment: PVD
Handle: G10
Blade Length: 68mm.
Blade thickness: 3mm.
Total length: 139mm.
Balance: -
Weight: 82g.
Sheath: in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-01PVD -
Bastinelli Knives - Diagnostic - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Stone Washed
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04SW -
Bastinelli Knives - Diagnostic Black - Karambit Neck Knife
Use target: neck knife
Type of production: Industrial
Country of production: Maniago - Italy
Blade: stainless steel N690Co
Blade treatment: Black Cerakote
Handle: stainless steel N690Co
Blade Length: 38mm.
Blade thickness: 4mm.
Total length: 99mm.
Balance: -
Weight: 23g.
Sheath: Neck, in Kydex
Packing: Cardboard box with Bastinelli Knives logos
Notes: Produced by Fox FKMDBC-04PVD -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORBG -
EOS Elite Outfitting Solutions - Orca S - Blue Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with thickness of mm per folder
Blade Length: 68mm.
Blade thickness: 4mm.
Closed length: 99mm.
Total Length: 175mm.
Closed thickness: 13mm.
balancing:
Weight:
Opening: Flipper
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-ORB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Target: Tactical / EDC / Collection
Type of production: artisanal seed
Country of production: U.S.A.
Blade: Steel CPM S35VN
Blade treatment: -
Handle: Anodized titanium with a thickness of 4mm per folder
Blade Length: 86mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 14mm.
balancing:
Weight:
Opening:
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SQGBB -
EOS Elite Outfitting Solutions - Squid - Grey Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQG -
EOS Elite Outfitting Solutions - Surgeon Titanium - knife
Intended use: Tactical / Collective
Type of production: artisanal seed
Country of Origin: USA
Blade: CTS-XHP stainless steel
Blade Treatment: Black PVD
Grip: Titanium Grade 5
Blade length: 92mm.
Blade thickness: 5mm.
Closed length: 122mm.
Overall length: 216mm.
Closed thickness: 13.2mm.
Balance: -
Weight: 187g.
Opening: Titanium thumbstood for the righteous
Washers: Steel ball bearings
Closure: Framelock
Clip: Titanium, Removable
Packing: nylon bag with EOS logos
Notes: -EOS-SUR -
EOS Elite Outfitting Solutions - Squid - Blue Titanium knife
Uso: Táctico / EDC / Colección
Tipo de producción: semillas Mano
País de producción: U.S.A.
Hoja: Acero CPM S35VN
El tratamiento de la hoja: -
Mango: titanio anodizado de 4 mm por carpeta
Longitud de la hoja: 86 mm.
Grosor de la hoja: 5 mm.
Longitud cerrada: 122 mm.
Longitud total: 216 mm.
Grosor cuando está cerrada: 14 mm.
equilibrio:
peso:
apertura:
Lavadoras: Rodamientos de bolas de acero
Cierre: Framelock
Clip: titanio, extraíble
Embalaje: bolsa de nylon con logotipos EOS
Notas: -...EOS-SQB -
Stedemon Knife Co. - ZKC C02 Jade Flipper - STEZKCC029 - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 88mm.
Blade thickness: 4mm.
Closed length: 130mm.
Total length: 220mm.
Weight: 134g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKCC029€77.87Out of stock -
Stedemon Knife Co. - ZKC D01 Blue Flipper - STEZKC01SW - Knife
Purpose of use: Sportsman
Type of production: Industrial
Country of production: China
Blade: Stainless steel 440C 58HRC
Handle: G10
Blade Length: 95mm.
Blade thickness: 3mm.
Closed length: 130mm.
Total Length: 230mm.
Weight: 142g.
Closure: Liner Lock
Clip: stainless steel
Packing: cardboard box with logos Stedemon Knife Co.
Notes: Opening through the Carson Flipper system - movement on ball bearingsSTEZKC01SW€0.00Only -20 leftOut of stock -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock