Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Horl - 2 PRO - diamond and ceramic disc sharpener - Made in Germany
With HORL ® 2 Pro, Otmar and Timo Horl are making a very personal dream come true. With a high precision internal planetary gear, it triples the grinding motion generated by a simple rolling motion. Therefore, HORL ® 2 Pro sharpens at triple speed. The solid components made of stainless steel and aluminum give it a particularly noble appearance.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2PRO -
Horl - 2 OAK - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2QUERCIA -
Horl - 2 WALNUT - sharpener with diamond and ceramic disc - Made in Germany
HORL ® 2 is the latest technological benchmark in the HORL ® family of sharpeners. Two sharpening angles and interchangeable grinding discs ensure greater flexibility. A completely new, play-free rolling sensation is created by the integrated ball bearings. The ceramic coating on the smoothing side guarantees impressive finishing results.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
CERAMIC SANDING WHEEL After processing with HORL ® Diamond Standard, the ceramic sanding disc noticeably improves the sanding result. Only a few movements are needed for this. The result is a smooth, clean and filigree sharp knife edge.
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
HOR-2NOCE -
Horl - 2 CRUISE - sharpener with diamond and steel disc - Made in Germany
The HORL ® 2 CRUISE incorporates our state of the art development with a focus on the essential. A constant sharpening angle, our durable diamond coating and a beautiful "chalk" color make HORL ® 2 CRUISE an all-round talent for sharpness in any kitchen. The 20 ° sharpening angle produces fast sharpening results and a stable cutting edge with long-lasting sharpening.
TWO DISCS
DIAMOND ABRASIVE The industrial diamonds used are suitable for effectively sharpening all steel for knives of any degree of hardness without water. When used correctly, the HORL ® Diamond Standard never needs to be replaced. The 46 μm grain size sharpens efficiently and precisely. In a short time, a high-quality sharpening result is achieved. The discs of the HORL ® 2 CRUISE are not replaceable
FOR STAINLESS STEEL SANDING After the sharpening process with the diamond disc, the stainless steel sanding disc smoothes the blade and removes any burrs with the help of its integrated grooves. Only a few movements are needed. The discs of the HORL ® 2 CRUISE are not editable
SUPERIOR EFFICIENCY
Industrial diamonds are considered to be one of the most durable and effective abrasives on the market. Monocrystalline diamonds are harder than any knife steel. Using a galvanic process, the diamonds in the HORL ® Diamond Standard are set at approx. 55% in a nickel bed. After the first grinding processes, the initially rough surface becomes finer and HORL® Diamond Standard achieves the ideal sanding surface.
20 ° SHARPENING ANGLE FOR STABLE SHARPNESS
The 20 ° sharpening angle offers a new sharpness in the shortest possible time. The knife also maintains its sharpness for a long time thanks to the stable cutting edge and is suitable for the widest range of cuts in everyday life in the kitchen. Also excellent for sharpening knives for sports and outdoor use.
THE HORL ® S-PAD FOR CONTINUOUS FLEXIBILITY IN GRINDING
The combination of powerful neodymium magnets and the HORL ® S-Pad ensure that the knife is firmly fixed when sharpening. Reinforced by the non-slip effect of the S-Pad, even small blades can be sharpened correctly by adapting them to the desired height.
HOR-2CRUISE -
Horl - premium sharpening set - 3000 and 6000 stones - strop - SET - Made in Germany
Set consisting of two discs of sharpening stones with # 3000 and # 6000 grit and a leather strop to be used at the end to free the blade of all grinding residues and provide the final sharpening.
The set is designed to further refine the result of the sharpening process after using the diamond and ceramic discs, which are standard in HORL ® sharpeners.
The two discs are simply screwed onto the sharpener instead of the stock ones and are intended to refine the edge of the blade of your high-level knives. The stones can be used without water.
Compatible with HORL ® Sharpener 1. Gen, HORL ® 2 and HORL ® 2 PRO.
This item is not compatible with HORL ® 2 CRUISE.
Strop: Measurements: 25 x 5 cm - Thickness: 5mm
HOR-SET -
Kai Japan - Shun Higonokami Personal Steak - DM5900 - Pocket steak knife
This beautiful folding knife is an extremely sought-after accessory, whether used as a gentleman's knife or as a personal steak knife.
The Higonokami style of knives was the very first produced in Japan, in fact it could already be found in 1896, during the Meiji period. One of the main features of the traditional Higo Nokami design is the protruding opening pin when the blade is closed, which allows the blade to be opened smoothly even with one hand.
Shun's Higo Nokami not only includes the traditional opening pin, but also makes improvements to the original design by also going to incorporate a Liner Lock type blade locking system to make the user experience more secure. A modern, thin and sharp VG10 stainless steel was also chosen, making the Higo Nokami perfect for use as a personal steak knife. The Pakkawood handle is enhanced by a central inlaid mosaic pin.
Series: SHUN
Usage: Steak knife, designed for use outside the home
Country of manufacture: Japan
Blade Length: 90mm
Total Length: 200mm
Handle Length: 120mm
Weight: 45g
Blade: VGMAX (VG-10) stainless steel at 61HRC, sharpened to 16° on each side
Handle: Packawood with inlaid mosaic pin and equipped with integrated Liner Lock type security systemDM-5900 -
Kai - Sharpening stone AP-0305 - Grit 400-1000 - knives accessories
Synthetic stone for sharpening with water. Double grain (400 and 1000).
Equipped with plastic support with liquid recovery tray and non-slip rubber feet.
Dimensions:
- only stone length 180 x width 60 x height 30 mm;
- with support length 250 x width 95 x height 55 mm.Quality level: high
AP-0305 -
Kai - Whetstone AP-0304 - Grain 3000 - accessories knives
Pietra giapponese sintetica per affilare ad acqua. Grana fine (3000). Dotata di supporto in plastica con vaschetta di recupero liquidi e piedini antiscivolo in gomma.
Dimensioni:
- solo pietra lunghezza 180 x larghezza 60 x altezza 15 mm;
- con supporto lunghezza 250 x larghezza 95 x altezza 40 mm.
Livello qualitativo: elevatoAP-0304 -
Horl - strip of cowhide for sharpening - strop - AL-P - Made in Germany
Original HORL ® leather made from vegetable tanned cowhide for a professional finish after sharpening. Thanks to its fine-pored surface, the blade is perfectly freed from even the finest residues on the edge after sharpening on stone.
Measurements: 25 x 5 cm - Thickness: 5mm
HOR-AL-P -
Museum Replicas Windlass - Bonny Highland Scottish Dirk 400806 - craft dagger
The Scottish dirk (also called highland dirk, in Scottish Gaelic, biodag) is a traditional and ceremonial side dagger of Scottish Highland regiment officials and possibly derived from the sixteenth century ballock.
The traditional Scottish dirk spread particularly in the second half of the seventeenth century, when it was used among the military during the Jacobite insurrection.
Production: artisan
Blade: carbon steel
Handle: wood
Knob: steel
Guard: steel
Sheath: leather and steel
Blade length: 29cm.
Total Length: 42.5cm.
Blade width: 35mm.
Blade thickness: 4mm.
Weight: 328g.
Balancing: -400806 -
Museum Replicas Windlass - Sgian Dubh 400910 Scottish knife - knife collection
The Sgian Dubh is a ceremonial dagger knife (in sgian Gaelic) worn as part of the modern Scottish Highland dress, along with the kilt.
It is worn tucked into socks, with only the knob visible.Intended use: sports / collection
Type of production: artisanal
Country of production: India
Blade: 1055 carbon steel
Blade treatment: -
Handle: in engraved wood with fittings
Blade length: 82mm.
Blade thickness: 2.5mm.
Total length: 170mm.
Weight: 46g.
Sheath: in wood and leather
Packaging: -
Note: -400910 -
Museum Replicass Windlass - Primitive Bowie Knife - 400884 - knife
Intended use: sports / collection / hunting
Type of production: Semi-Industrial
Lama production: India
Blade: 1065 carbon steel
Handle: brown wood
Blade length: 300mm.
Blade thickness: 4.5mm.
Total length: 465mm.
Balancing: 5 cm advanced
Weight: 542g.
Sheath: in brown leather
Packaging: cardboard box400884 -
Kai - Stone for grinding AP-2455 - grit 80 - accessories for knives
The stone for grinding AP-2455 is equipped with a grain 80, the best tool to smooth depressions or protuberances on the surface of the stones, of the compact choruses and to round off the irregular edges.
Country of production: Japan
Dimensions: 17 x 6 x 1.7 cm
Grain: # 80AP-2455 -
Kai - Polishing Strop Set - 45035020 - leather strop and polishing paste
High quality set for maintenance of razors, knives and gouges.
Composed by:
- Strop, wooden support covered with leather (thickness 2.5 mm) on both sides, size: 340x40x17 mm, weight 138 gr .;
- Polishing paste.
Especially recommended for Kai Shun and Magoroku Composite kitchen knives.
CORAM-215 -
Kai - multipurpose keychain - K-7003 - 70s vintage knife
Intended use: key chain / collection
Type of Industrial Production
Blade: stainless steel 420
Production Country: Japan
Handle: Steel plated gold and Chinese lacquer red cinnabar
Blade length: 37mm.
Blade Thickness: 1.5mm.
Overall length: 91mm.
Closed Length: 54mm.
Closing system: -
Weight: 36g.
Chain and key ring: Brass
Packaging: in brown velvet box with logos Kai Cutlery
Notes: very rare product in the late '70s, brand new, in perfect condition12577 -
Bradburn Custom Cutlery Pointy Kwaiken - custom knife
Knife made entirely by hand by the artisan American Bradburn
Blade: 1084 steel with a high carbon content and selective hardening clay 40/60HRC and high degree of polish .
Bo -Hi : none
Total length: 21.5cm .
Blade length : 9.5cm .
Blade thickness : 5mm .
Handle Length : 9.5cm .
Much Weight : 150g .
Sheath: kydex thermo format
Tsuka -ito : black cotton on same ( ray skin )
Menuki , Seppa , shitodome : bronzeNotes: one piece - certificate of authenticity signed craftsman
Small technical glossary : Hamon : tempering line on the blade * Hi : deep groove in the blade , also called colasangue * Saya : scabbard * Tsuka - Ito or Tsuka -gawa : weaving in cotton, silk or leather that wraps the handle * Tsuba : * guard Fuchi : ornament between guard and manicatura * Kashira : ornament at the end of the handle * Menuki : medallions placed under the cordage of the handle * Habaki : collar that wraps around the beginning of the blade * Seppa : * Shitodome guard seals : seals to which is linked the Sageo * Sori : curvature of the blade67203€307.38Out of stock -
Kai - Whetstone DM-0600 - Grain 6000/1000 - knives accessories
Kai - Whetstone DM-0600 - Grain 6000/1000 - knives accessories
Japanese synthetic stone for sharpening water. Double Grain: fine (6000) and medium / fine (1000).
Stone Size: 185 (length) x 65 (width) x 30 (height) mm.
Dimensions rubber backing: 198 (length) x 70 (Width) mm
Weight: 752 gr. (812 gr. With stand)Quality level: high
DM-0600 -
Museum Replicas Windlass - Italian Bastard Sword 500890 - PRIVATE COLLECTION - Artisan Sword
sword withdrawn from a private collection - In excellent condition, only the blade has a scratch following the removal of an engraving (visible in the attached photos)
Checked and certified by our internal Coltelleria Collini laboratory.
KNIFE RETIRED FROM PRIVATE COLLECTION
* Type: Previously Purchased and Used
* Condition: Excellent condition
* Marks on blade: YES
* Marks on handle: NO
* Box: Present
* Scabbard: Scabbard
* Manuals, Certificates and Warranties: Yes
* Checked and Certified by our internal laboratoryThis splendid battle ready sword stands out for the black finishes of the blade, pommel and guard and is a perfect example of a bastard sword: compact blade and elongated handle so you can use a second hand as support while still being able to use the sword with one hand thanks to its weight and small dimensions.
Blade: carbon steel
Handle: leather
Knob: carbon steel
Guard: carbon steel
Sheath: leather and steel
Blade length: 86cm.
Total Length: 105cm.
Blade Width: 45mm.
Blade thickness: 5mm.
Weight: 1580g.
Balancing: -AP8687