Knives, collection knife, tactical knives, outdoor knives, pocket knives and tools
-
Higonokami - Kanekoma knife - Black Small Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural tools, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 92mm.
Blade length: 76mm.
Blade thickness: 2.7mm
Open length: 155mm
Weight: 33g.
Note:HIGO-06BL€21.31Only 11 left -
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi M Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 75mm.
Blade thickness: 3mm
Overall length: 172mm
Weight: 42g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO07SL€23.77Only 4 left -
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Higonokami - Kanekoma - Miyamoto Musashi S Pocket Knife Japan
Blade: Carbon Steel San Mai - Yasuki Steel Blue Paper Steel 60HRC clad in
Handle: iron sheet
Closure: Without lock blade
Closed Length: 97mm.
Blade length: 65mm.
Blade thickness: 3mm
Overall length: 153mm
Weight: 46g.
Notes: Engravings on the handle and the blade. Lubricate the blade otherwise easily subject to oxidation.HIGO-06SL€21.31Only 12 left -
Berti - 4 Knife Set with Drawers - 7349A
Berti - Set of 4 forged knives with boxwood handles placed in a container that you can put inside a drawer or on a kitchen countertop.
Set includes:
Boning knife, total length 27 cm, blade 14 cm
Bread knife, total length 35 cm, blade 22 cm
Kitchen knife, total length 35 cm, blade 22 cm
Ham/salmon knife, total length 39 cm, blade 26 cm
7349A -
Higonokami - Sadakoma Higo in black leather - PRIVATE COLLECTION - knife
KNIFE WITHDRAWN FROM PRIVATE COLLECTION
* Origin: Withdrawn from a private collection, previously purchased.
* Condition: Overall in very good condition
* Commercially available: Discontinued
* Sharpening: Factory sharpened
* Marks on blade: None
* Marks on handle: None
* Box: Present
* Scabbard: -
* Manuals, Certificates and Warranties: -
* Checked and Certified by our in-house laboratoryFascinating knife used by the Japanese farmer "Higonokami kanekoma."
As is typical for many agricultural tools, this Japanese knife turns out to be extremely simple but the result of centuries of refinement that has found the difficult balance between form and function, and between cost and benefit.
The main feature definitely turns out to be the quality of the blade, in fact it uses a three-layer San Mai steel of which the one in the center is extremely hard.
Production: Japanese craftsmanship
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc
Handle: brass foil with elegant black leather cover
Closure: without blade lock
Length closed: 120mm.
Blade length: 90mm.
Blade thickness: 3mm
Length open: 210mm
Weight: 72g.
Notes: lubricate the blade well otherwise easily subject to oxidation.
Packaging: elegant and fine wooden box with Japanese ideograms.018208-CP€0.00Only -20 leftOut of stock -
Higonokami - Kanekoma knife - Black Medium Pocket Knife Japan
Charming knife used by the Japanese farmer.
As is typical for many agricultural implements, this Japanese knife is also extremely simple but the result of a centuries-old improvement that has found the difficult balance between form and function, and between cost and benefit.
The main feature is certainly the quality of the blade, in fact it uses a three-layer San Mai steel, of which the very hard one in the center.
It has a razor wire, as befits a tool created to cut and not just to be displayed in display cases.
Blade: San Mai carbon steel - Yasuki Steel Blue Paper Steel 62hrc in clad
Handle: iron foil
Closing: without blade lock
Length closed: 11mm.
Blade length: 72mm.
Blade thickness: 2.7mm
Open length: 170mm
Weight: 42g.
Note:HIGO-07BL€23.77Only 0 leftOut of stock -
Begg Knives - Kwaiken Frame Lock Carbon Fiber Inlays Blue Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MKW-CF-BLKB -
Begg Knives - Kwaiken Frame Lock Carbon Fiber Inlays Gold Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 90mm.
Blade thickness: 3.8mm.
Length closed: 125mm.
Total length: 215mm.
Handle thickness: 13.5mm.
Weight: 126g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MKW-CF-BLKG -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays Gold Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F-G -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays Blue Anodization - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; liners and spacers in anodized titanium
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Liner Lock in anodized titanium
Clip: in anodized titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F-B -
Begg Knives - Glimpse Fluted Blade Black G10 Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 95mm.
Blade thickness: 3.8mm.
Length closed: 127mm.
Total length: 229mm.
Handle thickness: 16mm.
Weight: 155g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -WKGCF1F -
Begg Knives - Mini Glimpse Frame Lock Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: Satin CPM-S35VN stainless steel
Handle: in anodised titanium with carbon fiber inserts and titanium spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium frame lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MG-CF-BLK -
Begg Knives - Mini Glimpse Companion OD Green Carbon Fiber Inlays - Steelcraft - Knife
Intended use: collection / sports
Type of production: Mid Tech (semi-artisan)
Country of production: USA
Blade: CPM-S35VN stainless steel with dual tone finish
Handle: in G10 with carbon fiber inserts; titanium liners and spacers
Blade length: 76mm.
Blade thickness: 3.8mm.
Closed length: 108mm.
Total length: 184mm.
Handle thickness: 14mm.
Weight: 105g.
Opening: carson flipper system on movement with ceramic ball bearings IKBS by Flavio Ikoma
Closure: Titanium Liner Lock
Clip: in titanium, machined from solid, removable, with ceramic retention ball
Packaging: cardboard box with Todd Begg Steelcraft Series logos - warranty and authenticity QR Code with knife serial number
Note: -SC-MG-ODG -
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Kanekoma - Sadakoma Higo traditional Japanese knife - brown leather 018 209 - knife
Charming knife used by the Japanese farmer " Higonokami kanekoma ."
As is typical for many agricultural tools , this Japanese knife is extremely simple but the result of a secular improvement that has found it difficult balance between form and function, and between cost and benefit.
The main feature is definitely the quality of the blade, in fact, uses a steel San Mai to three layers of which the one at the center rough .
It has a razor wire , as is appropriate for a tool to cut and not just born to be displayed in glass cases .
production: Japanese crafts
Blade : carbon steel, San Mai
Handle: black brass plate with elegant brown leather cover
Closure: Without lock blade
Closed Length : 120mm .
Blade length : 90mm .
Blade thickness : 3mm
Length open : 210mm
Weight: 72g .
Notes: lubricate the blade otherwise easily subject to oxidation .
Packing: elegant and fine wooden box with Japanese characters018209€0.00Only -20 leftOut of stock -
Bradburn Custom Cutlery Pointy Kwaiken - custom knife
Knife made entirely by hand by the artisan American Bradburn
Blade: 1084 steel with a high carbon content and selective hardening clay 40/60HRC and high degree of polish .
Bo -Hi : none
Total length: 21.5cm .
Blade length : 9.5cm .
Blade thickness : 5mm .
Handle Length : 9.5cm .
Much Weight : 150g .
Sheath: kydex thermo format
Tsuka -ito : black cotton on same ( ray skin )
Menuki , Seppa , shitodome : bronzeNotes: one piece - certificate of authenticity signed craftsman
Small technical glossary : Hamon : tempering line on the blade * Hi : deep groove in the blade , also called colasangue * Saya : scabbard * Tsuka - Ito or Tsuka -gawa : weaving in cotton, silk or leather that wraps the handle * Tsuba : * guard Fuchi : ornament between guard and manicatura * Kashira : ornament at the end of the handle * Menuki : medallions placed under the cordage of the handle * Habaki : collar that wraps around the beginning of the blade * Seppa : * Shitodome guard seals : seals to which is linked the Sageo * Sori : curvature of the blade67203€307.38Out of stock -
Berti - Coltello D'amore in silver, onyx and deer - handmade knife
The symbolic meaning of love knife, so you call the knife produced specifically to be exchanged between engaged, is twofold: - given to man symbolizes the incitement to the courage, virility, to prevail in the social context - given the woman takes the significance of accepting the commitment to defend their honor and the faith given to the blood. For both finally assume the archaic ritual significance to sanction the signing of a contract not yet institutionalized.
The handle is decorated with classic "dice eyes" that are meant to turn the knife in a valuable amulet against the evil eye. After marriage these knives were usually hung on the wall above the bed.
Blade: Stainless Steel 420
Handle: white deer with .925 silver and onyx stones set
Blade length: 105m.
Blade Thickness: 25mm.
Closed Length: 134mm
Overall length: 240mm.
Weight: 102g.2407 -
Berti - Maremmano Magnum in Corno di Bue n.182 - coltello artigianale
Maremmano Magnum
Ogni coltellinaio, ad un certo punto della propria carriera sente la necessità di dimostrare il grado di maestria acquistata in anni di esperienza. A questo servono le versioni giganti dei normali modelli di quotidiana produzione: creazioni del tutto straordinarie che richiedono giorni e giorni di lavoro, e di attenzioni. La versione gigante di uno tra sei dei Coltelli della Collezione Regionale Italiana: un banco di prova, la prova finale per entrare a far parte a pieno diritto dei Maestri Coltellinai, la ragione della nascita di ogni Magnum Capolavoro.
Materiale manico: Corno di Bue (punta piena)
Materiale lama: Acciaio inox AISI 420
Dimensione tutto: cm 27
Pezzi confezione: 1
Descrizione: Coltello maremmano manico corno Bue cm. 26,50347